Xeno-free self-assembling peptide scaffolds for building 3D organotypic skin cultures.

Organotypic skin cultures represent in vitro models of skin which can be used for disease modeling, tissue engineering, and screening applications. Non-human collagen is currently the gold standard material used for the construction of the supporting matrix, however, its clinical applications are limited due to its xenogeneic origin. We have developed a novel peptide hydrogel-based skin construct that shows a pluristratified epidermis, basement membrane, and dermal compartment after 3 weeks of in vitro culture. Peptide-based constructs were compared to collagen-based constructs and stratification marker expression was histologically higher in peptide constructs than in collagen constructs. Transepithelial electrical resistance also showed mature barrier function in peptide constructs. This study presents a novel application of the self-assembling peptide hydrogel in a defined xeno-free in vitro system.

A Chemically Well-Defined, Self-Assembling 3D Substrate for Long-Term Culture of Human Pluripotent Stem Cells.

Clinical applications of human pluripotent stem cells (PSCs) are limited by the lack of chemically well-defined scaffolds for cell expansion, differentiation, and implantation. In this study, we systematically screened various self-assembling hexapeptides to identify the best matrix for long-term 3D PSC culture. Lysine-containing Ac-ILVAGK-NH2 hydrogels maintained best the pluripotency of human embryonic and induced PSCs even after 30 passages. This peptide matrix is also compatible with the use of xeno-free and defined differentiation media. By exploiting its stimuli-responsive sol-gel transition, arrays of encapsulated PSCs can be bioprinted for large-scale cell expansion and derivation of miniaturized organoid cultures for high-throughput screening.

C-Terminal Residue of Ultrashort Peptides Impacts on Molecular Self-Assembly, Hydrogelation, and Interaction with Small-Molecule Drugs.

Single molecular changes on a tripeptide can have dramatic effects on their self-assembly and hydrogelation. Herein, we explore C-terminal residue variation on two consistent ultrashort peptide backbones, i.e. acetylated-Leu-Ile-Val-Ala-Gly-Xaa and acetylated-Ile-Val-Xaa (Xaa = His, Arg, Asn). The objective of this study is to identify candidates that can form hydrogels for small-molecule drug (SMD) delivery. Haemolysis and cytotoxicity (with human adipose-derived mesenchymal stem cells) assays showed that the new soluble peptides (Xaa = His, Arg) are cytocompatible. Gelation studies showed that all but acetylated-Ile-Val-Arg could gel under physiological conditions. Longer peptidic backbones drive self-assembly more effectively as reflected in field emission scanning electron microscopy (FESEM) and circular dichroism spectroscopy studies. Rheological studies revealed that the resultant hydrogels have varying stiffness and yield stress, depending on the backbone and C-terminal residue. Visible spectroscopy-based elution studies with SMDs (naltrexone, methotrexate, doxorubicin) showed that besides the C-terminal residue, the shape of the SMD also determines the rate and extent of SMD elution. Based on the elution assays, infrared spectroscopy, and FESEM, we propose models for the peptide fibril-SMD interaction. Our findings highlight the importance of matching the molecular properties of the self-assembling peptide and SMD in order to achieve the desired SMD release profile.

Bioprinting synthetic self-assembling peptide hydrogels for biomedical applications.

Three-dimensional (3D) bioprinting is a disruptive technology for creating organotypic constructs for high-throughput screening and regenerative medicine. One major challenge is the lack of suitable bioinks. Short synthetic self-assembling peptides are ideal candidates. Several classes of peptides self-assemble into nanofibrous hydrogels resembling the native extracellular matrix. This is a conducive microenvironment for maintaining cell survival and physiological function. Many peptides also demonstrate stimuli-responsive gelation and tuneable mechanical properties, which facilitates extrusion before dispensing and maintains the shape fidelity of the printed construct in aqueous media. The inherent biocompatibility and biodegradability bodes well for in vivo applications as implantable tissues and drug delivery matrices, while their short length and ease of functionalization facilitates synthesis and customization. By applying self-assembling peptide inks to bioprinting, the dynamic complexity of biological tissue can be recreated, thereby advancing current biomedical applications of peptide hydrogel scaffolds.

Self-Assembled Proteins and Peptides as Scaffolds for Tissue Regeneration.

Self-assembling proteins and peptides are increasingly gaining interest for potential use as scaffolds in tissue engineering applications. They self-organize from basic building blocks under mild conditions into supramolecular structures, mimicking the native extracellular matrix. Their properties can be easily tuned through changes at the sequence level. Moreover, they can be produced in sufficient quantities with chemical synthesis or recombinant technologies to allow them to address homogeneity and standardization issues required for applications. Here. recent advances in self-assembling proteins, peptides, and peptide amphiphiles that form scaffolds suitable for tissue engineering are reviewed. The focus is on a variety of motifs, ranging from minimalistic dipeptides, simplistic ultrashort aliphatic peptides, and peptide amphiphiles to large "recombinamer" proteins. Special emphasis is placed on the rational design of self-assembling motifs and biofunctionalization strategies to influence cell behavior and modulate scaffold stability. Perspectives for combination of these "bottom-up" designer strategies with traditional "top-down" biofabrication techniques for new generations of tissue engineering scaffolds are highlighted.

Peptide Bioink: Self-Assembling Nanofibrous Scaffolds for Three-Dimensional Organotypic Cultures.

Printable scaffolds with adequate mechanical strength and stiffness are sought after to ensure viability of printed cells and tissues. We report the first peptide bioinks-lysine-containing hexapeptides that self-assemble into stable, nanofibrous three-dimensional hydrogels with unprecedented stiffness of up to 40 kPa. These biocompatible scaffolds support the three-dimensional culture of human stem cells and differentiation of primary cells into organotypic (gastrointestinal and skin) structures for high-throughput screening, diagnosis, and tissue engineering.

Creation of consistent burn wounds: a rat model.

BACKGROUND: Burn infliction techniques are poorly described in rat models. An accurate study can only be achieved with wounds that are uniform in size and depth. We describe a simple reproducible method for creating consistent burn wounds in rats. METHODS: Ten male Sprague-Dawley rats were anesthetized and dorsum shaved. A 100 g cylindrical stainless-steel rod (1 cm diameter) was heated to 100℃ in boiling water. Temperature was monitored using a thermocouple. We performed two consecutive toe-pinch tests on different limbs to assess the depth of sedation. Burn infliction was limited to the loin. The skin was pulled upwards, away from the underlying viscera, creating a flat surface. The rod rested on its own weight for 5, 10, and 20 seconds at three different sites on each rat. Wounds were evaluated for size, morphology and depth. RESULTS: Average wound size was 0.9957 cm(2) (standard deviation [SD] 0.1845) (n=30). Wounds created with duration of 5 seconds were pale, with an indistinct margin of erythema. Wounds of 10 and 20 seconds were well-defined, uniformly brown with a rim of erythema. Average depths of tissue damage were 1.30 mm (SD 0.424), 2.35 mm (SD 0.071), and 2.60 mm (SD 0.283) for duration of 5, 10, 20 seconds respectively. Burn duration of 5 seconds resulted in full-thickness damage. Burn duration of 10 seconds and 20 seconds resulted in full-thickness damage, involving subjacent skeletal muscle. CONCLUSIONS: This is a simple reproducible method for creating burn wounds consistent in size and depth in a rat burn model.

Ultrashort peptide nanofibrous hydrogels for the acceleration of healing of burn wounds.

There is an unmet clinical need for wound dressings to treat partial thickness burns that damage the epidermis and dermis. An ideal dressing needs to prevent infection, maintain skin hydration to facilitate debridement of the necrotic tissue, and provide cues to enhance tissue regeneration. We developed a class of 'smart' peptide hydrogels, which fulfill these criteria. Our ultrashort aliphatic peptides have an innate tendency to self-assemble into helical fibers, forming biomimetic hydrogel scaffolds which are non-immunogenic and non-cytotoxic. These nanofibrous hydrogels accelerated wound closure in a rat model for partial thickness burns. Two peptide hydrogel candidates demonstrate earlier onset and completion of autolytic debridement, compared to Mepitel(®), a silicone-coated polyamide net used as standard-of-care. They also promote epithelial and dermal regeneration in the absence of exogenous growth factors, achieving 86.2% and 92.9% wound closure respectively, after 14 days. In comparison, only 62.8% of the burnt area is healed for wounds dressed with Mepitel(®). Since the rate of wound closure is inversely correlated with hypertrophic scar formation and infection risks, our peptide hydrogel technology fills a niche neglected by current treatment options. The regenerative properties can be further enhanced by incorporation of bioactive moieties such as growth factors and cytokines.

Comparative study of nanoparticle-mediated transfection in different GI epithelium co-culture models.

Oral nonviral gene delivery is the most attractive and arguably the most challenging route of administration. To identify a suitable carrier, we studied the transport of different classes (natural polymer, synthetic polymer and synthetic lipid-polymer) of DNA nanoparticles through three well-characterized cellular models of intestinal epithelium (Caco2, Caco2-HT29MTX and Caco2-Raji). Poly(phosphoramidate-dipropylamine) (PPA) and Lipid-Protamine-DNA (LPD) nanoparticles consistently showed the highest level of human insulin mRNA expression and luciferase protein expression in these models, typically at least three orders of magnitude above background. All of the nanoparticles increased tight junction permeability, with PPA and PEI having the most dramatic transepithelial electrical resistance (TEER) decreases of (35.3±8.5%) and (37.5±1.5%) respectively in the first hour. The magnitude of TEER decrease correlated with nanoparticle surface charge, implicating electrostatic interactions with the tight junction proteins. However, confocal microscopy revealed that the nanoparticles were mostly uptaken by the enterocytes. Quantitative uptake and transport experiments showed that the endocytosed, quantum dot (QD)-labeled PPA-DNA nanoparticles remained in the intestinal cells even after 24h. Negligible amount of quantum dot labeled DNA was detected in the basolateral chamber, with the exception of the Caco2-Raji co-cultures, which internalized nanoparticles 2 to 3 times more readily compared to Caco2 and Caco2-HT29MTX cultures. PEGylation decreased the transfection efficacy by at least an order of magnitude, lowered the magnitude of TEER decrease and halved the uptake of PPA-DNA nanoparticles. A key finding was insulin mRNA being detected in the underlying HepG2 cells, signifying that some of the plasmid was transported across the intestinal epithelial layer while retaining at least partial bioactivity. However, the inefficient transport suggests that transcytosis alone would not engender a significant therapeutic effect, and this transport modality must be augmented by other means in vivo to render nonviral oral gene delivery practical.

From short peptides to nanofibers to macromolecular assemblies in biomedicine.

In the last few years, a variety of self-assembling short peptides that consist exclusively of simple amino acids have been designed and modified. These peptides exhibit self-assembling dynamic behaviors. At the molecular structural level, they form α-helical, ß-sheet and ß-hairpins structures in water. These structures further undergo spontaneous assembly to form nanofibers which aggregate into supramolecular scaffolds that entrap large volumes of water. Furthermore, nanostructures and supramolecular structures that self-organized from these short peptides also have a broad spectrum of biotechnological applications. They are useful as biological materials for 2D and 3D tissue cell cultures, regenerative and reparative medicine, tissue engineering as well as injectable drug delivery matrices that gel in situ. We have endeavored to do a comprehensive review of short peptides that form nanofibrous hydrogels. In particular, we have focused on recent advances in peptide assembly motifs and applications.

Natural tri- to hexapeptides self-assemble in water to amyloid beta-type fiber aggregates by unexpected alpha-helical intermediate structures.

Many fatal neurodegenerative diseases such as Alzheimer's, Parkinson, the prion-related diseases, and non-neurodegenerative disorders such as type II diabetes are characterized by abnormal amyloid fiber aggregates, suggesting a common mechanism of pathogenesis. We have discovered that a class of systematically designed natural tri- to hexapeptides with a characteristic sequential motif can simulate the process of fiber assembly and further condensation to amyloid fibrils, probably via unexpected dimeric α-helical intermediate structures. The characteristic sequence motif of the novel peptide class consists of an aliphatic amino acid tail of decreasing hydrophobicity capped by a polar head. To our knowledge, the investigated aliphatic tripeptides are the shortest ever reported naturally occurring amino acid sequence that can adopt α-helical structure and promote amyloid formation. We propose the stepwise assembly process to be associated with characteristic conformational changes from random coil to α-helical intermediates terminating in cross-ß peptide structures. Circular dichroism and X-ray fiber diffraction analyses confirmed the concentration-dependent conformational changes of the peptides in water. Molecular dynamics simulating peptide behavior in water revealed monomer antiparallel pairing to dimer structures by complementary structural alignment that further aggregated and stably condensed into coiled fibers. The ultrasmall size and the dynamic facile assembly process make this novel peptide class an excellent model system for studying the mechanism of amyloidogenesis, its evolution and pathogenicity. The ability to modify the properties of the assembled structures under defined conditions will shed light on strategies to manipulate the pathogenic amyloid aggregates in order to prevent or control aggregate formation.

Transport of chitosan-DNA nanoparticles in human intestinal M-cell model versus normal intestinal enterocytes.

Oral vaccination is one of the most promising applications of polymeric nanoparticles. Using two different in vitro cellular models to partially reproduce the characteristics of intestinal enterocytes and M-cells, this study demonstrates that nanoparticle transport through the M-cell co-culture model is 5-fold that of the intestinal epithelial monolayer, with at least 80% of the chitosan-DNA nanoparticles uptaken in the first 30 min. Among the properties of nanoparticles studied, ligand decoration has the most dramatic effect on the transcytosis rate: transferrin modification enhances transport through both models by 3- to 5-fold. The stability of the nanoparticles also affects transport kinetics. Factors which de-stabilize the nanoparticles, such as low charge (N/P) ratio and addition of serum, result in aggregation and in turn decreases transport efficiency. Of these stability factors, luminal pH is of great interest as an increase in pH from 5.5 to 6.4 and 7.4 leads to a 3- and 10-fold drop in nanoparticle transport, respectively. Since soluble chitosan can act as an enhancer to increase paracellular transport by up to 60%, this decrease is partially attributed to the soluble chitosan precipitating near neutral pH. The implication that chitosan-DNA nanoparticles are more stable in the upper regions of the small intestine suggests that higher uptake rates may occur in the duodenum compared to the ileum and the colon.

Novel anisotropic engineered cardiac tissues: studies of electrical propagation.

The goal of this study was to engineer cardiac tissue constructs with uniformly anisotropic architecture, and to evaluate their electrical function using multi-site optical mapping of cell membrane potentials. Anisotropic polymer scaffolds made by leaching of aligned sucrose templates were seeded with neonatal rat cardiac cells and cultured in rotating bioreactors for 6-14 days. Cells aligned and interconnected inside the scaffolds and when stimulated by a point electrode, supported macroscopically continuous, anisotropic impulse propagation. By culture day 14, the ratio of conduction velocities along vs. across cardiac fibers reached a value of 2, similar to that in native neonatal ventricles, while action potential duration and maximum capture rate, respectively, decreased to 120ms and increased to approximately 5Hz. The shorter culture time and larger scaffold thickness were associated with increased incidence of sustained reentrant arrhythmias. In summary, this study is the first successful attempt to engineer a cm(2)-size, functional anisotropic cardiac tissue patch.