Açai Seeds (Euterpe oleracea Mart) Are Agroindustrial Waste with High Potential to Produce Low-Cost Substrates after Acid Hydrolysis.

Açai seeds have been discarded improperly around the Amazonia region, but they can be seen as promising low-cost substrates for fermentation processes. The structural carbohydrates and physicochemical characterization of açai seeds from the Amazonia were assessed followed by the determination of the optimal hydrolysis conditions using H3PO4 (phosphoric acid) and H2SO4 (sulfuric acid) to obtain a liquor with high contents of simple carbohydrates and low levels of potential microbial inhibitors usually generated during acid hydrolysis of carbohydrates. A central composite rotational design was carried out varying the concentrations of diluted acid (0-5%, w/v), solids (0.1-25%, w/v), and hydrolysis time (9.5-110 min). Acid hydrolysis with H2SO4 was more effective in producing reducing sugars (15.9-103.1 g/L) than H3PO4 (2.9-33.9 g/L) during optimization. The optimal hydrolysis conditions with H2SO4 were 3.5% of acid (w/v), 25% of solids during 70 min at 121 °C, which provided a liquor with 55 g/L of reducing sugars and low levels of microbial inhibitors: acetic acid (1.8 g/L), hydroxymethyl furfural (338 mg/L), and furfural (10 mg/L). Thus, açai seeds were characterized as promising agroindustrial waste with high potential to be used as a low-cost substrate in biotechnological processes, comprising relevant environmental and bioeconomic aspects for the development of the Amazonia.

Mairá-Potato (Casimirella sp.): Botanical, Food, Pharmacological, and Phytochemical Aspects.

Millions of people in the world live in food insecurity, so identifying a tuber with characteristics capable of meeting the demand for food and also identifying active compounds that can be used to minimize harm to human health is of great value. The aim was to carry out a review based on systematic review tools and the main objective was to seek information on botanical, food, pharmacological, and phytochemical aspects of Casimirella sp. and propose possible applications. This review showed papers that addressed botanical, food, pharmacological, and phytochemical aspects of the Mairá-potato and presented suggestions for using this tuber allied to the information described in the works found in the Google Academic, Scielo, Science Direct, Scopus, PubMed, and Web of Science databases. This review synthesized knowledge about the Mairá-potato that can contribute to the direction of further research on the suggested technological applications, both on the use of this tuber as a polymeric material and its use as biomaterial, encapsulation, bioactive use, and 3D printing, because this work collected information about this non-conventional food plant (PANC) that shows great potential for use in various areas of study.

Extracts of Eryngium foetidum Leaves from the Amazonia Were Efficient Scavengers of ROS and RNS.

Eryngium foetidum L. is an edible plant widespread in Amazonian cuisine and its leaves have high levels of promising phenolic compounds for the production of extracts to be used as natural antioxidant additives. In this study, the in vitro scavenging capacity of three freeze-dried extracts of E. foetidum leaves, obtained by ultrasound-assisted extraction using green solvents [water (H2O), ethanol (EtOH), and ethanol/water (EtOH/H2O)], was investigated against the most common reactive oxygen species (ROS) and reactive nitrogen species (RNS) generated in both physiological and food systems. Six phenolic compounds were identified, chlorogenic acid (2198, 1816 and 506 µg/g) being the major compound for EtOH/H2O, H2O, and EtOH extracts, respectively. All E. foetidum extracts were efficient in scavenging all the ROS and RNS (IC50 = 45-1000 µg/mL), especially ROS. The EtOH/H2O extract showed the highest contents of phenolic compounds (5781 µg/g) and showed the highest efficiency in scavenging all the reactive species, with high efficiency for O2•- (IC50 = 45 µg/mL), except for ROO•, for which EtOH extract was the most efficient. Therefore, E. foetidum leaf extracts, especially EtOH/H2O, showed high antioxidant potential to be used as natural antioxidants in food formulations and are promising for nutraceuticals products.

Development of a Nutraceutical Product Derived from By-Products of the Lipid Extraction of the Brazil Nut (Bertolletia excelsa H.B.K).

The objective of this investigation was to develop a nutraceutical product, in bars, using defatted Brazil nut by-products. The methodological bases of analyses followed the guidelines of the Association of Official Analytical Chemists international and experimental tests of formulations. The bars presented with high protein content with high nutraceutical potential expressed as high levels of magnesium, sodium, calcium and potassium, with emphasis on selenium, supplying around 50% of the daily recommendations. The sulfur amino acids reach approximately the recommended chemical score (97%), the aromatic amino acids with a proportion close to 50% and those of the branched chain supplying the established recommendations for adults. In the sensory tests, the formulation that presented the best attributes and the greatest acceptance (91.78% for the flavor and 97.89% for the general impression) by the tasters was the bar formulation made with a 75:25 ratio of defatted Brazil nuts flour and isolated soy protein.

Thermal Degradation of Carotenoids from Jambu Leaves (Acmella oleracea) during Convective Drying.

Jambu (Acmella oleracea) is a vegetable used in human food. Drying is an alternative to increase the shelf life of the product. High temperatures can induce the degradation of carotenoids and reduce the health benefits of these compounds. This study investigated the effect of the Jambu leaves' drying temperature on the carotenoid composition. It was performed previously by screening 16 plants from different localities based on the total carotenoid content. The process of drying by convection was carried out at temperatures of 35, 40, 50, and 60 °C in an air circulation oven, at an air velocity of 1.4 m/s-1 and a processing time of ~20 h. The drying data were fitted to six mathematical models and the quantification of the carotenoid retention was determined by HPLC-DAD. The study demonstrates that the carotenoid content among the samples collected from the 16 producers varied by 72% (lower-175 ± 16 µg/g, higher-618 ± 46 µg/g). Among the models, the Page model was found to be the most suitable model to explain the variation of the experimental data. The drying process at 40 °C reduces the Jambu leaves' carotenoid content significantly (p < 0.05) (All-trans-ß-carotene-86 ± 2 µg/g, All-trans-lutein-141 ± 0.2 µg/g) but does not alter the carotenoid profile. The occurrence of similar reduction behavior was observed for the different carotenoids at all the temperatures studied. The drying process at 35 °C was the condition that ensured the highest retention of carotenoids, and also a product classified as a very high source of carotenoids (total carotenoids-748 ± 27 µg/g, vitamin A-17 ± 1 µg RAE/g). Thus, this study concludes that a temperature of 35 °C for 14 h (air velocity-1.4 m/s-1) is the best drying condition for Jambu leaves using a low-cost dryer and as a possibility for the preservation and marketing of this Amazonian raw material.

Total and Free Hydrogen Cyanide Content and Profile of Bioactive Amines in Commercial Tucupi, a Traditionally Derived Cassava Product Widely Consumed in Northern Brazil.

Tucupi is a broth derived from cassava roots which is produced after the spontaneous fermentation of manipueira (the liquid portion obtained by pressing cassava roots), followed by cooking. This product is widely consumed along with traditional dishes in the Brazilian Amazonia and is already used in different places worldwide. In this study, tucupi obtained from the markets of Belém (Pará, Brazil) and produced using agroindustrial (11 samples) and non-agroindustrial (11 samples) units were investigated to determine their physicochemical characteristics, total and free HCN contents, and free bioactive amine profiles. Most of the samples showed significant variations (p ≤ 0.05) in pH (2.82-4.67), total acidity (0.14-1.36 g lactic acid/100 mL), reducing sugars (up to 2.33 g/100 mL), and total sugars (up to 4.35 g/100 mL). Regarding the amines, four biogenic amines (0.5-4.2 mg/L tyramine, 1.0-23.1 mg/L putrescine, 0.5-66.8 mg/L histamine, and 0.6-2.9 mg/L tryptamine) and one polyamine (0.4-1.7 mg/L spermidine) were identified in the tucupi samples. Even in the tucupi produced using the agroindustrial units, which had quality seals provided by the local regulatory agency, high levels of biogenic amines (4.4-78.2 mg/L) were observed, as well as high dosages of total (8.87-114.66 mg/L) and free (0.80-38.38 mg/L) HCN. These facts highlight the need for better knowledge regarding the product manufacturing process to establish standardization and high-quality conditions for tucupi processing since high contents of biogenic amines and HCN are commonly associated with adverse health effects.

Scavenging Capacity of Extracts of Arrabidaea chica Leaves from the Amazonia against ROS and RNS of Physiological and Food Relevance.

Arrabidaea chica, a medicinal plant found in the Amazon rainforest, is a promising source of bioactive compounds which can be used to inhibit oxidative damage in both food and biological systems. In this study, the in vitro scavenging capacity of characterized extracts of A. chica leaves, obtained with green solvents of different polarities [water, ethanol, and ethanol/water (1:1, v/v)] through ultrasound-assisted extraction, was investigated against reactive oxygen (ROS) and nitrogen (RNS) species, namely superoxide anion radicals (O2•-), hydrogen peroxide (H2O2), hypochlorous acid (HOCl), and peroxynitrite anion (ONOO-). The extract obtained with ethanol-water presented about three times more phenolic compound contents (11.8 mg/g) than ethanol and water extracts (3.8 and 3.6 mg/g, respectively), with scutellarein being the major compound (6.76 mg/g). All extracts showed high scavenging efficiency against the tested ROS and RNS, in a concentration-dependent manner with low IC50 values, and the ethanol-water extract was the most effective one. In addition, all the extracts were five times more efficient against ROO• than Trolox. Therefore, the extracts from A. chica leaves exhibited high promising antioxidant potential to be used against oxidative damage in food and physiological systems.

Saccharomyces cerevisiae and Pichia manshurica from Amazonian biome affect the parameters of quality and aromatic profile of fermented and dried cocoa beans.

The use of yeasts as starter cultures is a promising alternative to produce fermented cacao with particular characteristics regarding the quality of aromas and physical and chemical characteristics that are accepted by the chocolate market. This study aimed to evaluate the physical and chemical transformations of cocoa beans during fermentation after inoculation with starter cultures of yeast species Pichia manshurica (PF) and Saccharomyces cerevisiae (SF), both previously isolated in cocoa bean fermentations in the Brazilian Amazon, in comparison with a fermentation without the inoculum addition (CF). During the fermentation time, which was carried out on a cocoa farm in Igarapé-Miri (Amazon biome, Pará, Brazil), the contents of phenolic compounds (catechin and epicatechin), sugars (glucose, fructose, and sucrose), acetic acid, and ethanol were monitored by HPLC, and the volatile compounds profiles were assessed by GC-MS. The starter culture of P. manshurica was able to produce fermented cocoa beans with highly desirable characteristics for the production of good quality chocolate: low acidity, a broad variety of aromatic compounds with floral, fruity, and sweet characteristics, in addition to showing high contents of catechin and epicatechin, which are known by their antioxidant properties. Therefore, the use of starter cultures with species of yeasts isolated in the Amazon region, during cocoa fermentation, is an alternative to obtain fermented seeds with high quality favoring the commercial agreements in the chocolate market by cocoa producers. PRACTICAL APPLICATION: The addition of starter cultures was able to produce cocoa beans with good quality. Yeasts species isolated and identified in Amazonian cocoa fermentation can improve the profiles of aromatic compounds. Catechin and epicatechin contents are higher in inoculated cocoa beans fermentations.

Lactic Acid Bacteria and Bioactive Amines Identified during Manipueira Fermentation for Tucupi Production.

There is scarce information regarding lactic acid bacteria (LAB) and the production of biogenic amines during manipueira fermentation for tucupi. Thus, the objective of this study was to isolate and identify LAB, and to determine their impact on bioactive amine formation. Spontaneous fermentation of manipueira was carried out at laboratory scale and selected LAB colonies were isolated and identified by sequencing techniques and comparison with sequences from a virtual database. Only two LAB species of the genus Lactobacillus were identified during fermentation: Lactobacillus fermentum and Lactobacillus plantarum. L. fermentum was the predominant, whereas L. plantarum was only detected in manipueira prior to fermentation. Spermidine and putrescine were detected throughout fermentation, whereas histamine was produced at the final stage. There was positive correlation between LAB counts and putrescine and histamine levels, suggesting that the identified LAB are responsible for the synthesis of these amines during manipueira fermentation. Genetic assays are needed to verify whether the LAB identified have the genes responsible for decarboxylation of amino acids.

Convective Drying of Purple Basil (Ocimum basilicum L.) Leaves and Stability of Chlorophyll and Phenolic Compounds during the Process.

This study evaluated the effect of convective drying on the degradation of color and phenolic compounds of purple basil (Ocimum basilicum L.) leaves, and the hygroscopic behavior of dried leaves. The fresh leaves underwent drying at 40 °C, 50 °C, 60 °C, and 70 °C. Degradation of chlorophyll, flavonoids, and phenolic compounds were evaluated during drying and the hygroscopicity was evaluated through the moisture sorption isotherms. The drying mathematical modeling and the moisture sorption data were performed. The effective diffusivity for the drying increased from 4.93 × 10−10 m2/s at 40 °C to 18.96 × 10−10 m2/s at 70 °C, and the activation energy value (39.30 kJ/mol) showed that the leaves present temperature sensibility. The leaves dried at 40 °C had less degradation of phenolic compounds and color variation, but the drying process was too slow for practical purposes. Modified Page, Diffusion Approximation, and Verna models had excellent accuracy in drying kinetics. The isotherms showed that, in environments with relative humidity above 50%, the purple basil leaves are more susceptible to water gain, and at 8.83 g H2O/100 g db moisture, it guarantees the microbiological stability of the dried leaves. The Oswin model was the most suitable for estimating the moisture sorption isotherms of the dried leaves.

Biotechnological Production of Carotenoids Using Low Cost-Substrates Is Influenced by Cultivation Parameters: A Review.

Carotenoids are natural lipophilic pigments mainly found in plants, but also found in some animals and can be synthesized by fungi, some bacteria, algae, and aphids. These pigments are used in food industries as natural replacements for artificial colors. Carotenoids are also known for their benefits to human health as antioxidants and some compounds have provitamin A activity. The production of carotenoids by biotechnological approaches might exceed yields obtained by extraction from plants or chemical synthesis. Many microorganisms are carotenoid producers; however, not all are industrially feasible. Therefore, in this review, we provide an overview regarding fungi that are potentially interesting to industry because of their capacity to produce carotenoids in response to stresses on the cultivation medium, focusing on low-cost substrates.

How Climatic Seasons of the Amazon Biome Affect the Aromatic and Bioactive Profiles of Fermented and Dried Cocoa Beans?

In addition to the vast diversity of fauna and flora, the Brazilian Amazon has different climatic periods characterized by periods with greater and lesser rainfall. The main objective of this research was to verify the influence of climatic seasons in the Brazilian Amazon (northeast of Pará state) concerning the aromatic and bioactive profiles of fermented and dried cocoa seeds. About 200 kg of seeds was fermented using specific protocols of local producers. Physicochemical analyzes (total titratable acidity, pH, total phenolic compounds, quantification of monomeric phenolics and methylxanthines) and volatile compounds by GC-MS were carried out. We observed that: in the summer, the highest levels of aldehydes were identified, such as benzaldehyde (6.34%) and phenylacetaldehyde (36.73%), related to the fermented cocoa and honey aromas, respectively; and a total of 27.89% of this same class was identified during winter. There were significant differences (p ≤ 0.05, Tukey test) in the profile of bioactive compounds (catechin, epicatechin, caffeine, and theobromine), being higher in fermented almonds in winter. This study indicates that the climatic seasons in the Amazon affect the aromatic and bioactive profiles and could produce a new identity standard (summer and winter Amazon) for the cocoa almonds and their products.

Profile of Volatile Compounds of On-Farm Fermented and Dried Cocoa Beans Inoculated with Saccharomyces cerevisiae KY794742 and Pichia kudriavzevii KY794725.

This study aimed to identify the volatile compounds in the fermented and dried cocoa beans conducted with three distinct inoculants of yeast species due to their high fermentative capacity: Saccharomyces cerevisiae, Pichia kudriavzevii, the mixture in equal proportions 1:1 of both species, and a control fermentation (with no inoculum application). Three starter cultures of yeasts, previously isolated and identified in cocoa fermentation in the municipality of Tomé-Açu, Pará state, Brazil. The seeds with pulp were removed manually and placed in wooden boxes for the fermentation process that lasted from 6 to 7 days. On the last day of fermentation, the almonds were packaged properly and placed to dry (36 °C), followed by preparation for the analysis of volatile compounds by GC-MS technique. In addition to the control fermentation, a high capacity for the formation of desirable compounds in chocolate by the inoculants with P. kudriavzevii was observed, which was confirmed through multivariate analyses, classifying these almonds with the highest content of aldehydes, esters, ketones and alcohols and low concentration of off-flavours. We conclude that the addition of mixed culture starter can be an excellent alternative for cocoa producers, suggesting obtaining cocoa beans with desirable characteristics for chocolate production, as well as creating a product identity for the producing region.

Chemical implications and time reduction of on-farm cocoa fermentation by Saccharomyces cerevisiae and Pichia kudriavzevii.

The use of starters during fermentation has been gaining momentum as it can warrant high-quality chocolate. The objective of this study was to investigate the influence of Saccharomyces cerevisiae (Sc) and Pichia kudriavzevii (Pk) during on-farm fermentation on physico-chemical and microbiological characteristics and levels of methylxanthines and bioactive amines of cocoa. Four treatments were used: ScPk (1:1), only Sc, only Pk, and no starter (control). The starters lead to changes throughout fermentation, but provided fermented cocoa with similar pH, titratable acidity, reducing sugars and phenolic compounds. ScPk shortened fermentation time by 24 h. The ScPk fermented and dried cocoa had higher levels of monomeric phenols, methylxanthines, phenylethylamine and lower levels of the putrefactive amines - putrescine and cadaverine (p < 0.05). The results were confirmed by multivariate analysis. Based on these results, the mixture of both yeasts species is a promising starter for cocoa fermentation decreasing duration time and modulating high-quality components.

An environment-friendly spot test method with digital imaging for the micro-titration of citric fruits.

A new method to determine the total titratable acidity of orange, lemon and passion fruit, based on a spot test obtained from digital images and using anthocyanins as the biodegradable indicator, is presented for the first time. The colorimetric reactions were carried out by acid-base titration on a microscale, employing anthocyanin with a microplate for spot test purposes, with detection by digital imaging. To obtain highly precise data, a chamber based on a diffuser was developed to control the illumination supplied by the light emitting diodes, and coupled to a smartphone to acquire adequate digital images. High precision was obtained with a relative standard deviation of 0.758% for n = 95. The RGB values were extracted from the digital images and used as analytical signals, the values being correlated with the micro-volume of the titrant and used to construct the titration curves and obtain the first and second derivatives, respectively. For comparative purposes, the official AOAC (Association of Official Analytical Chemists) and MAPA (Ministry of Agriculture, Livestock and Food Supply of Brazil) methods were used and the results compared by applying the paired t-test at the 95% confidence level (n = 3). No difference was found between the values and the relative errors were less than 2.8%. The micro-titrimetric method was fast, uses anthocyanins as the natural indicator, is practical, and permits a reduction of 922 times or 99.9% of the volume required in a conventional titration. It is therefore ideal for routine analyses leading to a reduction in the waste generated, according to the principles of green chemistry.

Diversity of yeasts during fermentation of cocoa from two sites in the Brazilian Amazon

The purpose of this study was to identify the yeasts involved in spontaneous fermentation of cocoa from the Brazilian Amazon region. The fermentation process was carried out experimentally with cocoa seeds from two sites (Medicilândia and Tucumã), State of Pará, northern Brazil, during a six-day period. Totals of 44 yeasts were isolated from Medicilândia and 29 from Tucumã. Molecular identification was carried out by sequencing the D1/D2 region fragment of the rRNA 26S gene, expanded with universal primers for the NL1GC and LS2 eukaryotes. Pichia manshurica and Saccharomyces cerevisiae were identified in Medicilândia and five yeast species (Pichia fermentans, P. kudriavzevii, P. manshurica, S. cerevisiae and Zygosaccharomyces bailii) were identified in Tucumã. The results showed that P. manshurica and S. cerevisiae may have potential for use as starter cultures in future studies to improve the quality of cocoa seeds fermented in the Brazilian Amazon region. (AU)

A proposta deste estudo foi identificar as leveduras envolvidas na fermentação espontânea de cacau da Amazônia brasileira. A fermentação foi realizada em Medicilândia e Tucumã, Pará, Brasil, durante 6 dias. Em total foram obtidos 44 isolados de leveduras de Medicilândia e 29 de Tucumã. A identificação molecular foi realizada por sequenciamento do fragmento da região D1/D2 do gene rRNA 26S, amplificado com primers universais para eucariotos NL1GC e LS2. Em Medicilândia, foram identificadas Pichia manshurica e Saccharomyces cerevisiae. Em Tucumã foram identificadas cinco espécies (Pichia fermentans, P. kudriavzevii, P. manshurica, S. cerevisiae e Zygosaccharomyces bailii). Os resultados sugerem que P. manshurica e S. cerevisiae podem ter potencial para uso como culturas starter em estudos futuros, para melhorar a qualidade das sementes de cacau fermentadas na Amazônia brasileira.(AU)

Estabilidade físico-química e microbiológica de farinha de mandioca fermentada comercializada em Belém do Pará / Physicochemical and microbiological stability of fermented manioc flour marketed in Belém do Para

A farinha de mandioca fermentada é um alimento típico da região amazônica brasileira e sua produção ocorre com as seguintes etapas: colheita, descascamento, fermentação (tubérculos são imersos em um tanque com água ou córrego), lavagem, trituração, prensagem, moagem e torrefação. A farinha de mandioca é uma fonte importante de carboidratos na Amazônia, especialmente pelas pessoas de baixa renda. Neste trabalho estudou-se o comportamento físico-químico e microbiológico da farinha de mandioca fermentada comercializada em um mercado de rua e em supermercado. Para tal, 36 quilogramas de farinha de mandioca fermentada foram adquiridos e mantidos sob as mesmas condições ambientais do mercado de rua e do supermercado. Durante dois meses, as amostras foram analisadas quanto à umidade, cinzas acidez total titulável, pH e atividade de água. Os resultados mostraram que o pH e a acidez total titulável foram estáveis, mas a umidade e a atividade de água mudaram e aumentaram significativamente (p>0,05).(AU)

Physicochemical properties of three sugary cassava landraces / Propriedades físico-químicas de três acessos de mandiocaba

This study evaluates the physical and physicochemical properties of three sugary cassava (Manihot esculenta Crantz) landraces: São Francisco Bag 3, Manicueira 62, and Castanhal Iracema. These three landraces showed high estimated productivity (≥3.93kg plant-1) and had a high sugar content (≥3.92g 100g-1 of root), making them viable for use in syrup production, especially the São Francisco Bag 3 landrace (4.76g 100g-1). The Manicueira 62 landrace had the highest starch content (4.40g 100g-1). The three sugary cassava landraces exhibited high levels of cyanide (>195mg kg-1), indicating the need for processing prior to consumption.

Neste trabalho, foram avaliadas propriedades físicas e físico-químicas das raízes de três acessos de mandiocaba (Manihot esculenta Crantz): São Francisco Bag 3, Manicueira 62 e Castanhal Iracema. Os três acessos apresentaram elevada produtividade estimada (≥3,93kg planta-1) e as suas raízes apresentaram altos teores de açúcares (≥3,92g 100g-1 de raiz), apresentando-se como uma alternativa para a produção de xarope, particularmente o acesso São Francisco Bag 3 (4,76g 100g-1). O acesso Manicueira 62 foi o que apresentou o maior conteúdo de amido (4,40g 100-1). As três raízes estudadas apresentaram altos níveis de cianeto total (>195mg kg-1), o que indica que elas também necessitam ser processadas antes de serem consumidas.

OBTENÇÃO DA FARINHA DE TAPIOCA: PARTE 1 ­ AVALIAÇÃO DO PROCESSO / OBTAINMENT OF TAPIOCA FLOUR: PART 1 - PROCESS EVALUATION

Na primeira etapa deste estudo utilizou-se planejamento experimental para avaliar o efeito da temperatura de escaldamento e da umidade dos grânulos de fécula comercial, após o escaldamento, sobre propriedades importantes da farinha de tapioca, submetida à espocagem a 240°C. Na segunda etapa foram obtidas farinhas de féculas extraídas das raízes de mandioca das variedades Pai Ambrósio, Pocu e Paulo Velho, utilizando-se escaldamento a 190°C e espocagem a 240°C, além de espocagem a 190°C sem escaldamento. O planejamento indicou que maiores temperaturas de escaldamento e menores umidades dos grânulos, após o escaldamento, proporcionam farinhas com menores densidades aparentes e, consequentemente, mais expandidas. As propriedades tecnológicas das farinhas de tapioca produzidas com as féculas das raízes de mandioca variedades Pai Ambrósio, Pocu e Paulo Velho indicaram que as farinhas obtidas sem a etapa de escaldamento, com espocagem direta a 190°C, sofreram maior expansão. A fécula da variedade Pocu proporcionou a farinha mais expandida e, consequentemente, com maior índice de solubilidade em água e maior higroscopicidade.

In the first stage of this study an experimental design was used to assess the effect of scalding temperature and moisture of commercial starch granules and humidity, after scalding, over the properties of tapioca fl our submitted to bursting at 240°C. In the second stage, tapioca fl ours were obtained with the cassava roots from three varieties, Pai Ambrósio, Pocu and Paulo Velho, using scalding at 190°C and bursting at 240°C, as well as bursting at 190°C without scalding.The experimental design has shown that higher temperatures and lower moisture of granules produced tapioca fl our with lower bulk density and granules more expanded. The technological properties of tapioca fl ours from all cassava varieties showed that the product obtained by directly bursting at190°C presented greater expansion. The product of Pocu variety produced the more expanded fl our among the studied varieties, and consequently with higher water solubility and hygroscopicity.

Caracterização de farinhas de tapioca produzidas no estado do Pará / Characterization of tapioca flour obtained in Pará state, Brazil

A farinha de tapioca é um alimento produzido artesanalmente a partir da fécula de mandioca (Manihot esculenta Crantz), amplamente consumida na Região Amazônica. O objetivo deste trabalho foi caracterizar duas farinhas de tapioca produzidas no estado do Pará: uma no Baixo Amazonas e outra na Zona Bragantina. As duas farinhas apresentaram perfis granulométricos distintos e diferença significativa (P 0,05) para a maioria dos parâmetros físico-químicos e tecnológicos analisados. A farinha de tapioca proveniente do Baixo Amazonas apresentou maior umidade (10,7%), em função da maior capacidade de adsorver água, devido a sua maior área específica (menor granulometria). A microscopia óptica com luz polarizada, juntamente com as características dos dois produtos indicou a inexistência de um processo padrão utilizado na produção da farinha de tapioca.

Tapioca flour is a typical food produced from cassava starch (Manihot esculenta Crantz), widely consumed in the Amazon Region. The aim of this study was to characterize two tapioca flours produced in Pará State, Brazil one in the West Region and other in Bragantina Area. Both tapioca flour presented distinct particle-size distribution and significant difference (P 0.05) for majority of the physico-chemical and technological parameters. Flour from West Region presented high moisture (10.7%), this due the greater capacity of water adsorption, attributed at its high specific area (smaller particle-size). The optical microscopy with polarized light and the technologic properties of the products did not showed a standard process for the production of tapioca flour.