RESUMO
OBJECTIVE: This study aimed to evaluate the external and internal adaptations of cervical restorations using different restorative techniques. METHODS: Forty extracted and intact human premolars received standardized cervical preparations to simulate non-carious cervical lesions. The teeth were randomly divided into four groups (n=10) according to the restorative technique: D, direct composite restoration without a base (Palfique LX5, Tokuyama Dental Corp Inc, Tokyo, Japan); DB, direct composite restoration with a flowable composite liner (Estelite Flow Quick -High Flow, Tokuyama Dental Corp Inc); DI, direct-indirect composite restoration bonded with flowable composite; and I, indirect restoration bonded with flowable composite. Marginal adaptation of the restorations was observed in different segments of the margins using a scanning electron microscope. Analyses of internal adaptation were performed using micro-computed tomography. The Kruskal-Wallis and Mann-Whitney tests were used for statistical analysis of the data (α=5%). RESULTS: No significant differences were found in the marginal adaptation of the groups (p>0.05), although a significantly higher percentage of continuous margin was found in the proximal segment than in the cervical segment (p<0.05). No significant differences were detected between the groups in terms of internal adaptation (p>0.05). CONCLUSION: All the restorative techniques evaluated for the restoration of cervical lesions performed similarly in terms of marginal and internal adaptation.
Assuntos
Preparo da Cavidade Dentária , Restauração Dentária Permanente , Humanos , Resinas Compostas/uso terapêutico , Forramento da Cavidade Dentária , Adaptação Marginal Dentária , Restauração Dentária Permanente/métodos , Microtomografia por Raio-XRESUMO
Flexible pipes are modular constructions made up of several layers. They are broadly employed in oil & gas industry, playing an important role in the Brazilian Pre-Salt production. Under specific conditions, seawater can ingress and this contact with metallic middle layers can significantly lead to a service life reduction of these layers, especially due to a mechanism known as CO2 Stress Corrosion Cracking (SCC-CO2). Therefore, it becomes mandatory that inspection systems suitable for submarine use in order to detect annulus flooding before the failure of the flexible pipe become available. This paper presents an inspection system based on the gamma rays transmission focused on detecting such flood condition, possibly overcoming limitations of other inspection systems available in the market. The reliability of this solution was statistically evaluated as presented herein, showing great robustness based on the numerous available trials.
Assuntos
Dióxido de Carbono , Brasil , Corrosão , Raios gama , Reprodutibilidade dos TestesRESUMO
AIM: To evaluate the influence of ultraconservative access cavities (UltraAC) on canal shaping and filling ability and load capacity of mandibular molars after root canal preparation with XP-endo Shaper (XP) or Reciproc (RC), under simulated clinical conditions. Traditional access cavities (TradAC) were used for comparison. METHODOLOGY: Forty extracted mandibular molars were scanned by micro-computed tomographic and, based on similar anatomical features, were divided into four groups (n = 10), according to the type of access cavity and canal instrumentation protocol: TradAC/RC, TradAC/XP, UltraAC/RC and UltraAC/XP. All root canal procedures were performed with the teeth placed in a dental mannequin. Teeth were scanned after root canal instrumentation and filling. Unprepared canal area, dentine removed, accumulated hard tissue debris (AHTD), canal transportation, presence of voids and filling material remnants within the pulp chamber were analysed. After restorative procedures, the teeth were subjected to thermomechanical cycling and to a load capacity test. Statistical analyses were performed using two-way anova test, considering the randomized blocks design (P < 0.05). RESULTS: The percentage of unprepared canal area was significantly lower in TradAC groups when compared to UltraAC groups (P < 0.05), regardless of the instrument used. The UltraAC/XP group had significantly lower percentage of root dentine removed when compared to other groups (P < 0.05). UltraAC/XP and TradAC/XP groups had significantly lower percentages of AHTD than UltraAC/RC and TradAC/RC groups (P < 0.05). Regarding canal transportation, in the MB root canals, the TradAC/XP group had significantly lower values than other groups (P < 0.05). In general, in ML and distal root canals, TradAC/XP and UltraAC/XP groups had significantly lower values of canal transportation when compared to other groups (P < 0.05). Moreover, the UltraAC/RC had the greatest canal transportation values in MB and distal canals. The UltraAC groups had significantly greater percentages of voids and volume of remaining root filling material within the pulp chamber after cleaning procedures than TradAC groups (P < 0.05). There was no difference in the load capacity amongst groups (P < 0.05). CONCLUSION: The UltraAC/XP and UltraAC/RC groups had significantly greater areas of unprepared canal walls, significantly more voids and volume of root filling material remnants within the pulp chamber after canal filling. UltraAC/XP was associated with significantly less root dentine removal and significantly more AHTD whilst TradAC/XP had overall significantly less canal transportation. No differences were observed in the load capacity amongst groups.
Assuntos
Cavidade Pulpar , Preparo de Canal Radicular , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Obturação do Canal Radicular , Microtomografia por Raio-XRESUMO
AIM: To evaluate the correlation between the volume of dental hard tissues removed and the fracture resistance of mandibular molar teeth with ultraconservative (UltraAC) or traditional (TradAC) access cavity preparations. METHODOLOGY: Sixty recently extracted and intact mandibular first molars were scanned in a microcomputed tomographic (micro-CT) device, anatomically matched and assigned at random to 2 groups (n = 30), according to the access cavity type: UltraAC or TradAC. After access preparation, mesial and distal canals were prepared using Reciproc instruments and a new scan was taken. The volumes of pulp chamber and dental hard tissues in each specimen were measured before and after the experimental procedures, and the percentage volume reduction of hard tissues calculated for the entire tooth and for the crown separately. Teeth were then root filled, restored and subjected to fracture resistance tests in an universal testing machine. The force required to fracture was recorded in Newtons (N). The adherence of the variables to a Gaussian curve was verified using a Shapiro-Wilk test. Skewed data were analysed with nonparametric Wilcoxon signed rank or Spearman correlation tests, whilst the normally distributed data were analysed with a dependent samples Student t-test. Level of significance was set at 5%. RESULTS: Pre-operatively, no difference was observed between groups regarding the volume of pulp canal space or dental hard tissues (P > 0.05). After access preparation, volumes of the removed hard tissues from the entire tooth and from the crown were significantly greater in teeth prepared with TradAC than with UltraAC (P < 0.05). No significant difference was observed in the fracture resistance values between TradAC (902.9 ± 347.8 N) and UltraAC (948.7 ± 405.7 N) groups (P = 0.975). The Spearman test was unable to identify a correlation between fracture resistance and percentage volume of removed dental hard tissues in the entire root (P = 0.525, r = -0.084) or only in the crown (P = 0.152, r = -0.187). CONCLUSION: The volume of hard dental tissues removed, although greater in teeth with TradAC compared to UltraAC, did not correlate with the fracture resistance results, indicating that a minimally invasive access cavity did not increase the resistance of restored mandibular first molars to fracture.
Assuntos
Dente Molar , Preparo de Canal Radicular , Cavidade Pulpar , Dentina , Humanos , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Microtomografia por Raio-XRESUMO
AIM: To validate a new method for the evaluation of pulp tissue debridement in the root canals of extracted teeth using an impregnation protocol involving potassium triiodide, a radiocontrast solution known as Lugol's, combined with micro-computed tomographic (micro-CT) imaging. METHODOLOGY: The impact of NaOCl on the radiopacity of Lugol's solution was assessed using a two-fold dilution series of Lugol in distilled water and 5.25% NaOCl, which were then pipetted into transparent dishes and radiographed. To verify the influence of Lugol on the proteolytic effect of NaOCl, a dissolution test was performed using fresh bovine meat. Ten slices did not undergo any tissue processing, whilst twenty slices were fixed in formaldehyde for 24 h. After that, 10 of them were immersed in Lugol for another 24 h. Then, all specimens were placed in NaOCl and the time required for a complete tissue dissolution was recorded. For the last experiments (histological validation and micro-CT assessment), 8 extracted mandibular premolars with formerly vital pulps were immersed in buffered formalin, scanned in a micro-CT device, accessed, immersed in Lugol for 7 days and scanned again. Then, the root canals of 5 teeth were prepared and scanned, and the volume of remaining pulp tissue identified and quantified, whilst 3 teeth were histologically processed. The same specimens were subjected to histological assessment, and the images of the histologic sections were registered with the corresponding micro-CT images to verify whether the pulp tissue in the histological sections matched its counterpart in the Lugol-impregnated tissues identified in the micro-CT slices. RESULTS: There was no discernible effect on radiopacity when NaOCl was mixed with Lugol's solution. Tissue processing did not affect the time required for the complete dissolution of fresh bovine meat. Histological evaluation revealed a correlation between micro-CT and histological images confirming the identification of Lugol-impregnated pulp tissue in micro-CT images. CONCLUSIONS: The radiocontrast Lugol's solution was unaffected by NaOCl and did not interfere with its soft tissue dissolution capability. The impregnation protocol using Lugol's solution allowed the visualization of pulp tissue on the micro-CT images and the identification of pulp remnants after chemical-mechanical canal procedures.
Assuntos
Cavidade Pulpar , Preparo de Canal Radicular , Animais , Bovinos , Desbridamento , Polpa Dentária , Cavidade Pulpar/diagnóstico por imagem , Microtomografia por Raio-XRESUMO
AIM: To investigate a potential cause-effect relationship between dentinal microcracks and fracture resistance of mandibular incisors that had not been endodontically treated. METHODOLOGY: Sixty mandibular incisors with circular-shaped canals were selected based on micro-computed tomographic scans to create a homogeneous sample. The cross-sectional images of the specimens were screened to identify and quantify the presence of dentinal microcracks. Then, teeth were embedded in polystyrene resin and subjected to axial compressive loading using a universal testing machine. After fracture, the roots were re-scanned and fractography analysis was performed by inspection of 3D models to verify crack propagation. Spearman's rank correlation was used to assess the correlation between the number of microcracks and force required to fracture. RESULTS: Dentinal microcracks were detected in 79% of the specimens (n = 44). The incidence of microcracks varied between teeth from 6% to 42% of the total slices per sample (average of 14 ± 17%). The number of microcracks per sample varied from 0 to 1605, with an average of 412 ± 484 (median = 221 and IQR 25% = 15/75% = 658). The load at failure values varied from 227 to 924 N, with an average of 560.3 ± 168.1 N (median = 561 and IQR 25% = 458/75% = 694). The Spearman correlation coefficient (rho) equalled 0.065. CONCLUSIONS: There was no cause-effect relationship between the number of dentinal microcracks and the fracture resistance of nonendodontically treated mandibular incisors. The presence and quantity of microcracks did not make these roots more prone to fracture.
Assuntos
Preparo de Canal Radicular , Fraturas dos Dentes , Estudos Transversais , Dentina , Humanos , Laboratórios , Papel (figurativo) , Fraturas dos Dentes/diagnóstico por imagem , Fraturas dos Dentes/etiologia , Microtomografia por Raio-XRESUMO
AIM: To evaluate the viability of the electrochemical dissolution of fragments of fractured NiTi instruments in root canals of extracted human maxillary molars, using two electrodes and the solution restricted to a small reservoir coupled to the pulp chamber. The primary hypothesis was that this method enables the reduction of fragment volume and re-establishment of the root canal path with a size 08 K-file, both in simulated canals and in extracted human maxillary molars. METHODOLOGY: Fragments of F1 ProTaper instruments were polarized in simulated root canals and in distobuccal root canals of extracted maxillary molars using a new method, with the solution restricted to a small acrylic microcell coupled to each resin block or pulp chamber. Two electrodes were used, where one was kept in contact with the intracanal fragment and another was positioned in the solution present in the acrylic microcell. After the tests, a size 08 K-file was used passively to verify the possibility of bypassing the fragment, which was also confirmed by radiographic analysis. Micro-CT analysis of the teeth was used before and after fragment dissolution to evaluate the volume, length and porosity of the fragments. The D'Agostino-Pearson normality test was used to verify the distribution of the data. A paired t-test (P < 0.05) was used to compare the volume, length and porosity of the fragments before and after the dissolution tests. RESULTS: After dissolution, all fragments could be bypassed with a size 08 K-file in both simulated canals and in extracted teeth. The dissolution process did not result in significant reduction of neither the fragment length nor the fragment porosity. However, it resulted in a significant reduction of fragment volume (paired t-test, P < 0.05). CONCLUSION: The electrochemical dissolution of fragments of NiTi files in root canals of extracted human maxillary molars using two electrodes, and the solution restricted to a small reservoir coupled to the pulp chamber resulted in a significant reduction of fragment volume. The re-establishment of the root canal path with the passive insertion of size 08 K-files was possible in all samples after the tests, both in simulated canals and in extracted teeth.
Assuntos
Cavidade Pulpar , Níquel , Ligas Dentárias , Eletrólitos , Humanos , Dente Molar/diagnóstico por imagem , Preparo de Canal Radicular , Solubilidade , TitânioRESUMO
AIM: To evaluate the use of a reduced taper endodontic instrument system (Bassi Logic™ .03 taper) and expandable heat-treated system (XP-endo Shaper) on the ability to shape canals in mandibular molars, by means of microcomputed tomography (micro-CT) analysis. The Reciproc system was used as the reference for comparison. METHODOLOGY: Twenty-four mandibular molars were scanned in a micro-CT, matched based on similar anatomical features and sorted into three groups (n = 8 per group), according to root canal preparation system: Bassi Logic™ .03, XP-endo Shaper and Reciproc. The teeth were mounted onto a mannequin and the pulp chambers were accessed with traditional access cavities. In Bassi Logic™ .03 and Reciproc groups, mesial canals were prepared with size 25, .03 taper or R25 (size 25, .08v taper) instruments and the distal root canal with size 25, .03 taper and size 40, .03 taper or R25 and R40 (size 40, .06v taper), respectively. In XP-endo Shaper groups, all root canals were prepared with XP-endo Shaper (size 30, .04v taper). After root canal preparation, the teeth were rescanned. The percentage of untouched canal areas and the percentage of removed dentine were evaluated separately for mesial and distal root canals. The data were analysed using one-way anova and Tukey tests (P < 0.05). RESULTS: The Bassi Logic™ .03 group was associated with a greater percentage of untouched canal areas when compared to XP-endo Shaper and Reciproc groups for mesial and distal root canals (P < 0.05), but no differences were found between XP-endo Shaper and Reciproc groups (P > 0.05). No significant difference was observed in the percentage of dentine removed amongst the groups for mesial and distal root canals (P > 0.05). CONCLUSION: The use of a reduced taper system (Bassi Logic™ .03) during root canal preparation resulted in a greater percentage of untouched canal areas when compared to XP-endo Shaper and Reciproc instruments. No differences were observed amongst the systems regarding the percentage of dentine removed.
Assuntos
Cavidade Pulpar , Preparo de Canal Radicular , Movimento Celular , Cavidade Pulpar/diagnóstico por imagem , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgia , Microtomografia por Raio-XRESUMO
This work presents a new technique for the synthesis of particles satisfying the conditions of several multiphase suspensions. It consists of manufacturing PMMA_La2O3 hybrid microspheres through suspension polymerization first and then submitting the beads to neutron activation. It was found that the fractional mass of the filler La2O3 in the beads can be greater that 60% using this technique. The results and other properties of the particles clearly indicate that the technique is effective to produce particles for several RPT applications.
RESUMO
Zika virus (ZIKV) infection during pregnancy is associated with a spectrum of developmental impairments known as congenital Zika syndrome (CZS). The prevalence of this syndrome varies across ZIKV endemic regions, suggesting that its occurrence could depend on cofactors. Here, we evaluate the relevance of protein malnutrition for the emergence of CZS. Epidemiological data from the ZIKV outbreak in the Americas suggest a relationship between undernutrition and cases of microcephaly. To experimentally examine this relationship, we use immunocompetent pregnant mice, which were subjected to protein malnutrition and infected with a Brazilian ZIKV strain. We found that the combination of protein restriction and ZIKV infection leads to severe alterations of placental structure and embryonic body growth, with offspring displaying a reduction in neurogenesis and postnatal brain size. RNA-seq analysis reveals gene expression deregulation required for brain development in infected low-protein progeny. These results suggest that maternal protein malnutrition increases susceptibility to CZS.
Assuntos
Desnutrição/complicações , Infecção por Zika virus/congênito , Infecção por Zika virus/complicações , Animais , Animais Recém-Nascidos , Peso Corporal , Encéfalo/enzimologia , Encéfalo/patologia , Brasil/epidemiologia , Dieta com Restrição de Proteínas , Surtos de Doenças , Embrião de Mamíferos/patologia , Feminino , Regulação da Expressão Gênica no Desenvolvimento , Desnutrição/virologia , Camundongos Endogâmicos C57BL , Microcefalia/complicações , Microcefalia/virologia , Neurogênese , Tamanho do Órgão , Gravidez , Síndrome , Carga Viral , Infecção por Zika virus/virologiaRESUMO
AIM: To evaluate the incidence of root dentinal microcracks after two extraction techniques through micro-computed tomographic (micro-CT) analysis. METHODOLOGY: Thirty pairs of premolars, extracted for orthodontic reasons, were assigned to two experimental groups, following a split-mouth design (n = 30): traumatic technique group (TTG) - teeth extracted following a conventional protocol using forceps, and an atraumatic technique group (ATG) - teeth extracted following an atraumatic technique protocol in which the root was gently detached from the periodontal ligament using a periotome. All teeth were immediately immersed in distilled water and scanned in a micro-CT device within 72 h following the extraction. The assessment of the images was completed on cross-section images by two masked evaluators. The Mann-Whitney test was used to assess the significant differences between the groups regarding the number of cross-sections displaying microcracks whilst the Fischer's exact test was used to assess differences in the frequency of specimens with defects (P < 0.05). RESULTS: A total of 52 750 micro-CT cross-sectional images were evaluated. A total of 352 cross-sections had at least one dentinal defect. Microcracks were observed in five teeth of the TTG group (n = 352 slices) and in two teeth of the ATG group (n = 103 slices). The statistical analysis used was unable to detect a significant difference between the groups in terms of the number of dentinal microcracks (P = 0.233) and in the frequency of teeth displaying microcracks (P = 0.424). CONCLUSION: A small number of sound teeth without endodontic treatment had dentinal microcracks regardless of the extraction technique applied. No difference was noticed between the traumatic and atraumatic techniques in the incidence of microcracks.
Assuntos
Preparo de Canal Radicular , Fraturas dos Dentes , Estudos Transversais , Dentina , Humanos , Microtomografia por Raio-XRESUMO
AIM: To investigate the shaping and cleaning performance of the Clearsonic ultrasonic tip as a supplementary tool during the preparation of long oval-shaped root canals through micro-computed tomographic (micro-CT) imaging technology. The Reciproc M-Wire R40 instrument was used as a reference instrumentation technique for comparison. METHODOLOGY: Twenty mandibular incisors with single, straight and long oval-shaped canals were selected and pair-matched by micro-CT scanning. The root canals were prepared with Reciproc R25 and R40 instruments, scanned again in a micro-CT device and randomly allocated into one of the two experimental groups (n = 10), according to the supplementary debridement protocol used: Clearsonic or Reciproc R40 used in a brushing motion against buccal and lingual walls. Noninstrumented canal areas, accumulation of hard-tissue debris (AHTD) and volume of removed dentine were assessed using micro-CT imaging following the supplementary debridement protocols. Data were analysed statistically in two phases using a t-test with a significance level of 5%. RESULTS: In phase-1, there was a significant similarity between the samples regarding the evaluated micro-CT baseline parameters (P > 0.05), validating the anatomical similarity between the tooth pairs. In phase-2, there was a significant difference between the groups for canal volume, surface area, noninstrumented root canal walls and the amount of removed dentine for both absolute and percentage values (P < 0.05), but not for AHTD (P = 0.759). CONCLUSIONS: The Clearsonic tip outperformed the Reciproc R40 instrument as a supplementary debridement protocol as it was associated with significantly greater reduction of noninstrumented root canals walls and consequently a larger amount of removed dentine. Both groups performed similarly regarding the AHTD.
Assuntos
Preparo de Canal Radicular , Desbridamento , Cavidade Pulpar , Desenho de Equipamento , Ultrassom , Microtomografia por Raio-XRESUMO
AIM: To evaluate the influence of ultraconservative endodontic cavities (UEC) on canal shaping and filling ability, cleaning of the pulp chamber, time required to perform root canal treatment and fracture resistance of 2-rooted maxillary premolars in comparison with traditional endodontic access cavities (TEC) in extracted teeth placed in a phantom head to simulate clinical conditions. METHODOLOGY: Twenty extracted intact 2-rooted maxillary premolars were scanned in a micro-computed tomographic device, matched based on similar anatomical features of the canals and assigned to UEC or TEC groups (n = 10). Then, teeth were mounted on a mannequin head and their pulp chamber accessed. After canal preparation, filling and cavity restoration, the time required to perform root canal treatment was recorded and the specimens were loaded to fracture in a universal testing machine. The maximum load at fracture was recorded. The sample was scanned after root canal instrumentation, filling and restoration procedures. Untouched canal areas, accumulation of hard-tissue debris (AHTD), voids in root fillings and cleaning of the pulp chamber were analysed. Data were analysed statistically using Shapiro-Wilk and Student's t-tests with a significance level of 5%. RESULTS: The percentage of untouched canal area did not differ significantly between UEC and TEC groups (P > 0.05). However, UECs were associated with a greater percentage of AHTD after canal preparation (P < 0.05). No differences were observed in terms of voids in root fillings between the groups (P > 0.05). Nonetheless, UEC had a greater percentage of root filling remnants in the pulp chamber after cleaning procedures (P < 0.05). The time required to perform root canal treatment was significantly longer in the UEC group (P < 0.05). There was no difference regarding the mean load at fracture between the groups (P > 0.05). Unrestorable fractures were observed in all specimens of both groups. CONCLUSIONS: There was no true benefit associated with ultraconservative endodontic cavities. UEC resulted in more AHTD remaining inside the root canals. UEC did not influence the quality of root fillings; however, UEC made the cleaning procedure of the pulp chamber more difficult, thus increasing the total time required to perform root canal treatment. Moreover, UEC were not associated with an increase in fracture resistance of root filled 2-rooted maxillary premolars.
Assuntos
Cavidade Pulpar , Materiais Restauradores do Canal Radicular , Dente Pré-Molar , Humanos , Preparo de Canal Radicular , Tratamento do Canal RadicularRESUMO
Meteorites have been arousing the curiosity of mankind since antiquity. However, the interest in these objects goes far beyond mere curiosity in the study of such materials, which has great importance due essentially to the information they can provide. The importance of studying meteorites is associated about the earliest conditions and processes during the formation and earliest history of the solar system. So, in this study, the characterization of two meteorite fragments was performed using X-ray computed microtomography (micro-CT) and X-ray microfluorescence (micro-XRF). These techniques were used for their non-destructive characteristics and the ability to provide information about the structure and composition the meteorites. The micro-CT images showed encrusted structures within both samples. However, while in Lunar meteorites spheroidal structures very similar to small grains internally grouped in clusters were found, in the Martian meteorite a very peculiar structure was identified. Besides that, the micro-CT it was also possible to evaluate the different density materials that compose the samples. The micro-XRF results accounted for the presence of the elements Si, Ca, Ti, Cr, Mn, Fe, Ni and Sr in the Lunar sample, as well as of Si, S, K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, Sr and Y in the Martian sample. The results obtained are effective for the characterization of meteorites, proving thus that it is possible to obtain important information about the chemical composition, as well as about the distribution and the internal structure of these materials, evaluating aspects such as density and porosity.
RESUMO
Metallic archeological artifacts have specific characteristics that differs them to the other classes of materials due to the transformations that occurs to them, mainly electrochemical. This way, a process called corrosion takes place, starting at the surface of the artifacts, changing the metals in oxides, sulphates, carbonates or other compounds that may result in substantial modifications in their morphology or the total mineralization. Possibly, most part of the archeological artifacts was already suffering this natural deterioration process, even before the period of time that they have remained buried. A number of techniques can be used for the analysis of these artifacts; however, most of them require physical sectioning, which is a complex time-consuming process. This work proposes the use of X-ray microtomography (microCT), which is a non-invasive and expeditious analysis technique, in order to identify the structures and texture of metallic archeological artifacts under incrustations. A set of artifacts found in excavations in the city of Rio de Janeiro (Brazil) were investigated. They show evident forms of degradation, and the incrustations did not allow to clearly identifying them. Through the microCT results is was possible to evaluate the structure of the artifacts, as well as to quantify the material loss caused by corrosion. Such results provided significant data about these historic pieces, which is important for a precise diagnostic about their conservation state, being a useful tool for preserving the morphology of the collected artifact.
RESUMO
AIM: To investigate the smallest dentine thickness in mesial canals of mandibular molars along the cervical and middle thirds of the root by means of a micro-computed tomographic (micro-CT) technology and digital image analysis. METHODOLOGY: Fifty mesial roots of mandibular molars having two independent canals (mesiobuccal and mesiolingual), in the coronal and middle levels, were selected and scanned in a micro-CT device. After reconstruction procedures, approximately 468 slices per root covering the 7 mm below the furcation area of the mesial root were analysed to measure the smallest dentine thickness (danger zone [DZ]) in each slice from both distal and mesial regions of the mesial canals by an automatic segmentation process. RESULTS: The DZ values in the mesiobuccal canals varied from 0.67 to 1.93 mm, with an average of 1.13 ± 0.21 mm. For the mesiolingual canals, the DZ varied from 0.77 to 1.89 mm with an average of 1.10 ± 0.21 mm. There was no correspondence in the DZ between the mesiobuccal and mesiolingual canals at the same cross-sectional level in 71% of the specimens. Moreover, the smallest dentine thickness was towards the mesial region of the roots in 22% and 18% of the mesiolingual and mesiobuccal canals, respectively. (Figs 1 and 2 CONCLUSIONS: The smallest dentine thickness was on the mesial plane of the roots in about 40% of the canals. The vertical location of the DZ in relation to the furcation area was in the middle third of the root.
Assuntos
Mandíbula , Dente Molar , Estudos Transversais , Cavidade Pulpar , Dentina , Raiz Dentária , Microtomografia por Raio-XRESUMO
AIM: To evaluate the performance of XP-endo Finisher R instruments when removing root filling remnants from oval-shaped canals using microcomputed tomographic (micro-CT) imaging as the analytical tool. Passive ultrasonic irrigation (PUI) was used as a reference technique for comparison. METHODOLOGY: Twenty mandibular incisors with oval-shaped canals were matched based on similar anatomic features of the canal (volume, aspect ratio and 3D configuration) after scanning procedures. The canals were prepared with Reciproc R25 instruments, filled with gutta-percha and AH Plus sealer using the single-cone technique and retreated up to a Reciproc R40 instrument. After retreatment procedures, the specimens were rescanned, and the homogeneity between the specimens, the oval-shaped anatomy and the remaining filling material were confirmed. The pair-matched samples were assigned to two experimental groups (n = 10), according to the supplementary approach used: XP-endo Finisher R or PUI. Each sample was scanned after each endodontic procedure. The volume of remaining root filling material was quantified before and after the use of each supplementary approach. This analysis was performed considering the total canal (Student t-test) and also by thirds (anova procedure followed by a Bonferroni correction). Data were analysed statistically with a significance level of 5%. RESULTS: The volume of root filling material at baseline was similar between the groups (t-test, P = 0.787). XP-endo Finisher R removed significantly more root filling material compared to PUI (t-test, P = 0.015), as it removed a mean of â 32% material compared to 12% for the PUI. There was no difference in the amount of root filling material removed in the root canal thirds after using both supplementary approaches (one-way anova, P = 0.07 for XP-endo Finisher R and P = 0.886 for PUI). CONCLUSIONS: Both supplementary approaches significantly reduced the volume of remaining root filling material from oval-shaped canals. The XP-endo Finisher R instrument removed significantly more root filling material than PUI. None of the supplementary approaches was able to render oval-shaped canals completely free from remaining root filling material.
Assuntos
Materiais Restauradores do Canal Radicular , Obturação do Canal Radicular , Cavidade Pulpar , Guta-Percha , Humanos , Retratamento , Preparo de Canal Radicular , Microtomografia por Raio-XRESUMO
AIM: To investigate the prevalence, location and pattern of pre-existing microcracks in non-endodontically treated teeth from fresh cadavers. Micro-computed tomography (micro-CT) technology was used as the analytical tool enabling full screening of the root dentine with the teeth retained in their original alveolar socket. METHODOLOGY: As a pilot study and to validate the present method, a series of 4 high-resolution scans were performed on one bone-block specimen with teeth collected post-mortem: (i) entire bone-block including the teeth, (ii) second molar tooth extracted atraumatically from the bone-block, (iii) extracted tooth dehydrated to induce dentinal defects and (iv) entire bone-block following reinsertion of the extracted tooth into its matching alveolar socket. In the main study, forty-two dentoalveolar maxillary and mandibular bone-blocks each containing 3-5 adjacent teeth (a total of 178 teeth) were collected post-mortem and scanned in a micro-CT device. All cross-section images of the 178 teeth (n = 65 530) were screened from the cementoenamel junction to the apex to identify the presence of dentinal defects. RESULTS: In the pilot study, the microcracks observable when the dehydrated tooth was outside the bone-block remained detectable when the entire bone-block plus reinserted tooth was scanned. This means that the screening process revealed the presence of the same microcracks in both experimental situations (the tooth outside and inside the maxillary bone-block). From a total of 178 teeth in the bone-blocks removed from cadavers, 65 530 cross-sectional images were analysed and no dentinal microcracks were detected. CONCLUSIONS: This in situ cadaveric model revealed the lack of pre-existing dentinal microcracks in non-endodontically treated teeth. Thus, the finding of dentinal microcracks observed in previous cross-sectional images of stored extracted teeth is unsound and not valid. It should be assumed that microcracks observed in stored extracted teeth subjected to root canal procedures are a result of the extraction process and/or the post-extraction storage conditions. Therefore, as a consequence, the presence of such dentinal microcracks in stored extracted teeth - observable in cross-sectional images of the roots - should be referred to as experimental dentinal microcracks.
Assuntos
Preparo de Canal Radicular , Raiz Dentária , Estudos Transversais , Dentina , Humanos , Projetos Piloto , Microtomografia por Raio-XRESUMO
AIM: To assess the shaping ability of the new XP-endo Shaper instrument after different working times. METHODOLOGY: Ten mesial roots of mandibular molars were scanned in a micro-computed tomographic device and prepared using the XP-endo Shaper instrument up to the working length (WL) according to the manufacturer's recommendation. Then, each specimen was subjected to an extra 15, 30 and 45 s of active instrumentation at the WL. Postoperative scans were performed after canal preparation at each time-point. Then, the registered pre- and postoperative datasets were examined to evaluate the percentages of volume and surface area of the instrumented canal, surface area of noninstrumented canal areas and the volume of removed dentine. Repeated measures general linear model was used to compare the differences in either the increase or the reduction of the parameters amongst the time-points. Alpha-error was set at 5%. RESULTS: Extending the period of XP-endo Shaper active instrumentation at WL significantly influenced several parameters such as volume (P < 0.001) and surface area (P < 0.001) of the instrumented canal, surface area of noninstrumented canal areas (P < 0.001), and volume of removed dentine (P < 0.001). CONCLUSIONS: Extending the activation time of XP-endo Shaper instruments at WL resulted in a more comprehensive root canal preparation, increasing the volume and surface area of root canal preparation and the volume of removed dentine.