Sustainable high-strength and dimensionally stable composites through in situ regulation and reconstitution of bamboo-derived lignin and hemicellulose contents.

The development of modern construction and transportation industries demands increasingly high requirements for thin, lightweight, high-strength, and highly tough composite materials, such as metal carbides and concrete. Bamboo is a green, low-carbon, fast-growing, renewable, and biodegradable material with high strength and toughness. However, the density of its inner layer is low due to the functional gradient (the volume fraction of vascular bundles decreases from the outer layer to the inner layer), resulting in low performance, high compressibility, and significant amounts of bamboo waste. We utilized chemical and mechanical treatments of bamboo's low-density, low-strength inner layers to create lightweight, ultra-thin, high-strength, and high-toughness composites. The treatment included the partial removal of lignin and hemicellulose to alter the chemical components, followed by mechanical drying and hot pressing. The treated bamboo had 100.8 % higher tensile strength (150.35 MPa), 47.7 % higher flexural strength (97.67 MPa), and 132.0 % higher water resistance and was approximately 68.9 % thinner than the natural bamboo. The excellent physical and mechanical properties of the treated bamboo are attributed to the contraction of parenchyma cells during delignification, the interlocking due to the collapse of parenchyma cells during mechanical drying, and an increase in the density of hydrogen bonds between cellulose molecular chains during hot pressing. Our research provides a new strategy for obtaining sustainable, ultra-thin, lightweight, high-strength, and high-toughness composite materials from bamboo for construction and transportation applications.

Organic-inorganic hybrid ZIF-8/MXene/cellulose-based textiles with improved antibacterial and electromagnetic interference shielding performance.

Despite the tremendous efforts on developing antibacterial wearable textile materials containing Ti3C2Tx MXene, the singular antimicrobial mechanism, poor antibacterial durability, and oxidation susceptibility of MXene limits their applications. In this context, flexible multifunctional cellulosic textiles were prepared via layer-by-layer assembly of MXene and the in-situ synthesis of zeolitic imidazolate framework-8 (ZIF-8). Specifically, the introduction of highly conductive MXene enhanced the interface interactions between the ZIF-8 layer and cellulose fibers, endowing the green-based materials with outstanding synergistic photothermal/photodynamic therapy (PTT/PDT) activity and adjustable electromagnetic interference (EMI) shielding performance. In-situ polymerization formed a MXene/ZIF-8 bilayer structure, promoting the generation of reactive oxygen species (ROS) while protecting MXene from oxidation. The as-prepared smart textile exhibited excellent bactericidal efficacy of >99.99 % against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) after 5 min of NIR (300 mW cm-2) irradiation which is below the maximum permissible exposure (MPE) limit. The sustained released Zn2+ from the ZIF-8 layer achieved a bactericidal efficiency of over 99.99 % within 48 h without NIR light. Furthermore, this smart textile also demonstrated remarkable EMI shielding efficiency (47.7 dB). Clearly, this study provides an elaborate strategy for designing and constructing multifunctional cellulose-based materials for a variety of applications.

Selective and Controlled Release Responsive Nanoparticles with Adsorption-Pairing Synergy for Anthocyanin Extraction.

Anthocyanins with different structures have different anti-inflammatory and anti-cancer properties. Precise structural use can improve the chemopreventive effects of anthocyanins and enhance treatment outcomes because the anthocyanin structure influences its functional sites and activities. However, owing to the available variety of anthocyanins and their complex structures, the low matching of intermolecular forces between existing adsorbents and anthocyanins limits the targeted separation of anthocyanin monomers. Short-range and efficient selective binding, which is difficult to achieve, is the current focus in the extraction field. We here developed self-assembled Fe3O4-based nano adsorbers with different surface modifications based on adsorption-pairing synergy. The electrostatic force, coordination bond, hydrogen bond, and π-π* bond together induced selective adsorption between Fe3O4 nanoparticles and anthocyanin molecules. An acid-release solution disrupted the polarity balance in the aforementioned association system, thereby promoting the controlled release of anthocyanins. Among the candidates, the effects of morphology, particle size, surface charge, and functional group on adsorption performance were analyzed. The polyacrylamide-modified magnetic Fe3O4 nanoparticles were found to be favorable for selectively extracting anthocyanin, with an adsorption capacity of 19.74 ± 0.07 mg g-1. The release percentage of cyanidin-3-O-glucoside reached up to 98.6% ± 1.4%. This study offers a scientific basis for developing feasible nanotechniques to extract anthocyanins and plant active substances.

High Value Utilization of Waste Wood toward Porous and Lightweight Carbon Monolith with EMI Shielding, Heat Insulation and Mechanical Properties.

With the increasing pollution of electromagnetic (EM) radiation, it is necessary to develop low-cost, renewable electromagnetic interference (EMI) shielding materials. Herein, wood-derived carbon (WC) materials for EMI shielding are prepared by one-step carbonization of renewable wood. With the increase in carbonization temperature, the conductivity and EMI performance of WC increase gradually. At the same carbonization temperature, the denser WC has better conductivity and higher EMI performance. In addition, due to the layered superimposed conductive channel structure, the WC in the vertical-section shows better EMI shielding performance than that in the cross-section. After excluding the influence of thickness and density, the specific EMI shielding effectiveness (SSE/t) value can be calculated to further optimize tree species. We further discuss the mechanism of the influence of the microstructure of WC on its EMI shielding properties. In addition, the lightweight WC EMI material also has good hydrophobicity and heat insulation properties, as well as good mechanical properties.

Exploring how lignin structure influences the interaction between carbohydrate-binding module and lignin using AFM.

Nonproductive adsorption of cellulase onto the residual lignin in substrate seriously hinders the enzymatic hydrolysis. To understand how lignin structure affects lignin-cellulase interaction, the carbohydrate-binding module (CBM) functionalized atomic force microscope tip was used to measure CBM-lignin interaction by single-molecule dynamic force spectroscopy in this work. The results showed that sulfonated lignin (SL) has the greatest adhesion force to CBM (4.74 nN), while those of masson pine milled wood lignin (MWL), poplar MWL and herbaceous MWLs were 2.85, 1.03 and 0.27-0.61 nN, respectively. It provides direct quantitative evidence for the significance of lignin structure on lignin-cellulase interaction. The CBM-MWLs interaction decreased sharply to 0.054-0.083 nN while SL was added, indicating the primary mechanism of SL promoting lignocellulose hydrolysis was significantly reducing the nonproductive adsorption of substrate lignin on cellulase. Finally, the "competitive adsorption" mechanism was proposed to interpret why SL effectively promotes the enzymatic hydrolysis of lignin-containing substrates.

Bioinspired Carbon Superstructures for Efficient Electromagnetic Shielding.

Biologically inspired superstructural materials exhibit wide application prospects in many fields, in terms of mitigating increasingly serious electromagnetic (EM) pollution in the civil field. Here, we successfully obtain bamboo slices with uniform pore size distribution through the advanced bamboo transverse splitting technology developed by our group previously and prepare large-scale honeycomb-like carbon-based tubular array (CTA) structures with a controllable pore size, graphitization degree, and selectable conductivity property. Based on the simulation and experimental results, the EM shielding performance of CTAs is proven to be sensitive to the microchannel aperture size and the EM energy incident angle, which is attributed to the difference in the propagation rate of induced electrons in different directions. Among the candidates, CTA-middle-1500 exhibits the best shielding performance against incident EM energy with average SE/ρ values of 123.7 and 144.5 dB cm3 g-1 for perpendicular and parallel directions, respectively, showing its application potential as a lightweight and efficient EM shielding material. The predicted optimal incident angle for CTA-middle-1500 against EM energy radiation is 15°, with the largest RCS reduction value of 26.1 dB m2. The excellent EM shielding performance is attributed to the good reflection capacity involved with the high conductivities of the CTAs.

Chirality-Dependent Tumor Phototherapy Using Amino Acid-Engineered Chiral Phosphorene.

Phosphorene, also known as black phosphorus nanosheet (BPNS), has been investigated as a nanoagent for tumor therapy. However, promoting its intracellular accumulation while preventing the cytoplasmic decomposition remains challenging. Herein, for the first time, we propose a chiral BPNS designed through surface engineering based on amino acids with high biocompatibility and an abundant source for application in chirality-dependent tumor phototherapy based on its intracellular metabolism. The advantage of using cysteine (Cys) over other amino acids was that its d, l, or dl-form could efficiently work as the chirality inducer to modify the BPNS through electrostatic interaction and prevent alterations in the intrinsic properties of the BPNS. In particular, d-Cys-BPNS displayed an approximately threefold cytotoxic effect on tumor cells compared with l-Cys-BPNS, demonstrating a chirality-dependent therapy behavior. d-Cys-BPNS not only promoted high intracellular content but also showed resistance to cytoplasmic decomposition. Cys-engineered BPNS also demonstrated chirality-dependent phototherapy effects on tumor-bearing mice, in proximity to the results in vitro. Chiral engineering is expected to open new avenues that could promote the use of BPNS in tumor phototherapy and boost chiral nanomedicine.

Patternable Nanocellulose/Ti3C2Tx Flexible Films with Tunable Photoresponsive and Electromagnetic Interference Shielding Performances.

Nanocellulose-mediated MXene composites have attracted widespread attention in the fields of sustainable energy, wearable sensors, and electromagnetic interference (EMI) shielding. However, the effects of different nanocelluloses on the multifunctional properties of nanocellulose/Ti3C2Tx composites still need further exploration. Herein, we use three types of nanocelluloses, including bacterial cellulose (BC), cellulose nanocrystals (CNCs), and 2,2,6,6-tetramethylpiperidin-1-yloxy (TEMPO)-oxidized cellulose nanofibers (TOCNs), as intercalation to link Ti3C2Tx nanosheets via a self-assembly process, improving the dispersibility, film-forming ability, mechanical properties, and multifunctional performances of nanocelluloses/Ti3C2Tx hybrids through electrostatic forces and hydrogen bonding. The optimized ultrathin (∼40 µm) TOCN/Ti3C2Tx film integrates excellent tensile strength (∼98.89 MPa), long-term stability (during deformation and water erosion), favorable photoelectric response (photosensitivity up to 2620%), and temperature response (reaching 163 °C in only 12 s). Laser-cutting patterned TOCN/Ti3C2Tx films are assembled into flexible multifunctional electronics, exhibiting splendid photoresponse performances and tunable electromagnetic energy shielding capability (>96.4%) related to the variation of water content at the film-gel electrolyte interface. Multifunctional patterned devices based on TOCN/Ti3C2Tx composite films provide a novel pathway to rationally design wearable EMI devices with photoelectric response and photothermal conversion.

Magnetic Nanobubble Mechanical Stress Induces the Piezo1-Ca2+ -BMP2/Smad Pathway to Modulate Neural Stem Cell Fate and MRI/Ultrasound Dual Imaging Surveillance for Ischemic Stroke.

Neural stem cells (NSCs) are used to treat various nervous system diseases because of their self-renewal ability and multidirectional differentiation potential. However, an insufficient ability to track their migration in vivo and poor control over their survival and differentiation efficiency are two major critical challenges for clinical application. Here, it is shown that when magnetic nanobubbles (MNBs), which are assembled from magnetic nanoparticles, are internalized by NSCs, intramembrane volumetric oscillation of the MNBs induces an increase in intracellular hydrostatic pressure and cytoskeleton force, resulting in the activation of the Piezo1-Ca2+ mechanosensory channel. This subsequently triggers the BMP2/Smad biochemical signaling pathway, leading to differentiation of NSCs into the neuronal phenotype. Signaling through the Piezo1-Ca2+ -BMP2/Smad pathway can be further accelerated by application of an external shear stress force using low-intensity pulsed ultrasound. More importantly, magnetic resonance imaging and ultrasound imaging surveillance of NSCs based on MNB labeling can be leveraged to provide NSC therapeutic outcomes. Both the in vitro and in vivo findings demonstrate that a bubble nanostructure-induced physical force can modulate and control the mechanical signaling pathway regulating stem cell development.

Artificial intelligence-assisted enumeration of ultra-small viruses with dual dark-field plasmon resonance probes.

Direct visual enumeration of viruses under dark-field microscope (DFM) using plasmon resonance probes (PRPs) is fast and convenient; however, it is greatly limited in the assay of real samples because of its inability to accurately identify false positives owing to non-specific adsorption. In this study, we propose an artificial intelligence (AI)-assisted DFM enumeration strategy for the accurate assay of Enterovirus A71 (an ultra-small human virus) using two PRPs; a 40 nm silver nanoparticle probe (SNP) that appears bright blue under DFM, and a 120 nm gold nanorod probe (GNP) that appears red under DFM. The capture chip was prepared by immobilizing the SNPs with antibodies on the glass to capture the target virus and to form dichromatic sandwich structures with the GNPs, followed by imaging under a dark field (DF). Subsequently, the DF images of the capture chip were subjected to a two-step screening: first, using image processing, and thereafter using the AI algorithm screening to eliminate false positive results and background noise. The results revealed that the data from the AI-assisted dual PRPs assay were highly consistent with those of quantitative PCR (qPCR), and that the sensitivity with a minimum detectable concentration of 3 copies/µL was 5 times higher than that of qPCR. The entire analysis was completed within 45 min. Therefore, our AI-assisted virus enumeration strategy with two DF PRPs holds great potential for ultra-sensitive and accurate quantification of viruses in real samples.

Biomass-Derived Carbon Heterostructures Enable Environmentally Adaptive Wideband Electromagnetic Wave Absorbers.

Although advances in wireless technologies such as miniature and wearable electronics have improved the quality of our lives, the ubiquitous use of electronics comes at the expense of increased exposure to electromagnetic (EM) radiation. Up to date, extensive efforts have been made to develop high-performance EM absorbers based on synthetic materials. However, the design of an EM absorber with both exceptional EM dissipation ability and good environmental adaptability remains a substantial challenge. Here, we report the design of a class of carbon heterostructures via hierarchical assembly of graphitized lignocellulose derived from bamboo. Specifically, the assemblies of nanofibers and nanosheets behave as a nanometer-sized antenna, which results in an enhancement of the conductive loss. In addition, we show that the composition of cellulose and lignin in the precursor significantly influences the shape of the assembly and the formation of covalent bonds, which affect the dielectric response-ability and the surface hydrophobicity (the apparent contact angle of water can reach 135°). Finally, we demonstrate that the obtained carbon heterostructure maintains its wideband EM absorption with an effective absorption frequency ranging from 12.5 to 16.7 GHz under conditions that simulate the real-world environment, including exposure to rainwater with slightly acidic/alkaline pH values. Overall, the advances reported in this work provide new design principles for the synthesis of high-performance EM absorbers that can find practical applications in real-world environments.

3D magnetic nanocomposite scaffolds enhanced the osteogenic capacities of rat bone mesenchymal stem cells in vitro and in a rat calvarial bone defect model by promoting cell adhesion.

Magnetic scaffolds incorporated with iron oxide nanoparticles (IONPs) are biocompatible and present excellent osteogenic properties. However, the underlying mechanism is unclear. In this study, 3D-printed poly(lactic-co-glycolic acid) scaffolds were coated with IONPs using layer-by-layer assembly (Fe-scaffold) to prepare magnetic scaffolds. The effects of this modification on osteogenesis were investigated by comparison with untreated scaffolds (Uncoated-scaffold). The results showed that the proliferation of rat bone mesenchymal stem cells (rBMSCs) on the Fe-scaffold was enhanced compared with those on the Uncoated-scaffold (p < 0.05). The alkaline phosphatase activity and expression levels of osteogenic-related genes of cells on the Fe-scaffold were higher than those on the Uncoated-scaffold (p < 0.05). Fe-scaffold was found to promote the cell adhesion compared with Uncoated-scaffold, including increasing the adhered cell number, promoting cell spreading and upregulating the expression levels of adhesion-related genes integrin α1 and ß1 and their downstream signaling molecules FAK and ERK1/2 (p < 0.05). Moreover, the amount of new bone formed in rat calvarial defects at 8 weeks decreased in the order: Fe-scaffold > Uncoated-scaffold > Blank-control (samples whose defects were left empty) (p < 0.05). Therefore, 3D magnetic nanocomposite scaffolds enhanced the osteogenic capacities of rBMSCs in vitro and in a rat calvarial bone defect model by promoting cell adhesion. The mechanisms were attributed to the alteration in its hydrophilicity, surface roughness, and chemical composition.

A flexible electromagnetic wave-electricity harvester.

Developing an ultimate electromagnetic (EM)-absorbing material that can not only dissipate EM energy but also convert the generated heat into electricity is highly desired but remains a significant challenge. Here, we report a hybrid Sn@C composite with a biological cell-like splitting ability to address this challenge. The composite consisting of Sn nanoparticles embedded within porous carbon would split under a cycled annealing treatment, leading to more dispersed nanoparticles with an ultrasmall size. Benefiting from an electron-transmitting but a phonon-blocking structure created by the splitting behavior, an EM wave-electricity device constructed by the optimum Sn@C composite could achieve an efficiency of EM to heat at widely used frequency region and a maximum thermoelectric figure of merit of 0.62 at 473 K, as well as a constant output voltage and power under the condition of microwave radiation. This work provides a promising solution for solving EM interference with self-powered EM devices.

Effect of Saturated Steam Heat Treatment on Physical and Chemical Properties of Bamboo.

The aim of this study was to investigate the effects of the heat treatment time and initial moisture content of bamboo on the corresponding chemical composition, crystallinity, and mechanical properties after saturated steam heat treatment at 180 °C. The mechanism of saturated steam heat treatment of bamboo was revealed on the micro-level, providing a theoretical basis for the regulation of bamboo properties and the optimization of heat treatment process parameters. XRD patterns of the treated bamboo slices were basically the same. With the increase in the initial moisture content of bamboo, the crystallinity of bamboo increased first and then decreased after treatment. Due to the saturated steam heat treatment, the content of cellulose and lignin in bamboo slices increased while the content of hemicellulose decreased, but the content of cellulose in bamboo with a 40% initial moisture content increased first and then decreased. The shear strength of treated bamboo changed little within 10 min after saturated steam heat treatment, and then decreased rapidly. During the first 20 min with saturated steam heat treatment, the compressive strength, flexural strength, and flexural modulus of elasticity of the treated bamboo increased, and then decreased.

Moderate cooling coprecipitation for extremely small iron oxide as a pH dependent T1-MRI contrast agent.

Iron based nanomedicine (IBNM) has been one powerful diagnostic tool as a magnetic resonance imaging (MRI) contrast agent (CA) in the clinic for years. Conventional IBNMs are generally employed as T2-MRI CAs, but most of them are constrained in clinical indication expansion by magnetic susceptibility artifacts. In comparison, extremely small iron oxide (ESIO) with a core size less than 5 nm has demonstrated the T1-MRI effect, which provides prospects for a Gd-based agent alternative. Nevertheless, currently developed ESIOs for T1-MRI CAs always require harsh conditions such as a high temperature and high boiling point reagent. Moreover, very few of the currently developed ESIOs meet the stringent pharmaceutical standard. Herein, on the basis of a crystal nuclear precipitation-dissolution equilibrium mechanism and outer/inner sphere T1-MRI theory, monodisperse ESIOs with an average size of 3.43 nm (polydispersity index of 0.104) are fabricated using a moderate cooling procedure with mild coprecipitation reaction conditions. The as-synthesized ESIOs display around 3-fold higher T1 MRI signal intensity than that of commercial Ferumoxytol (FMT), comparable to that of Gd-based CAs in vitro. Additionally, the T1-MRI performance of the ESIOs is pH dependent and delivers bright signal augmentation. Eventually, the internalization into mesenchymal stem cells of the ESIO is realized in the absence of a transferring agent. Considering the identical structure and composition of the ESIOs as compared to that of FMT, they could meet the pharmaceutical criteria, thus providing great potential as T1-MRI Cas, for instance as stem cell tracers.

Synthesis of Fe3C@C from Pyrolysis of Fe3O4-Lignin Clusters and Its Application for Quick and Sensitive Detection of PrPSc through a Sandwich SPR Detection Assay.

The prion protein (PrPSc) has drawn widespread attention due to its pathological potential to cause prion diseases. Herein, we successfully synthesized Fe3C@C by carbonizing Fe3O4-lignin clusters, which were prepared through a facile hydrogen bonding interaction between ≡Fe-OH and hydroxyl groups of lignin. Our in-depth investigation confirmed that the composites were Fe3C@C core/shell particles. We constructed a novel sandwich surface plasmon resonance (SPR) detection assay for sensitive PrPSc detection, utilizing bare gold surface and aptamer-modified Fe3C@C (Fe3C@C-aptamer). Due to the highly specific affinity of Fe3C@C-aptamer towards PrPSc, the sandwich type SPR sensor exhibited excellent analytical performance towards the discrimination and quantitation of PrPSc. A good linear relationship was obtained between the SPR responses and the logarithm of PrPSc concentrations over a range of 0.1⁻200 ng/mL. The detection sensitivity for PrPSc was improved by ~10 fold compared with the SPR direct detection format. The required detection time was only 20 min. The specificity of the present biosensor was also confirmed by PrPC and other reagents as controls. This proposed approach could also be used to isolate and detect other highly pathogenic biomolecules with similar structural characteristics by altering the corresponding aptamer in the Fe3C@C conjugates.

Gold Nanoparticle Probe-Assisted Antigen-Counting Chip Using SEM.

Currently, it remains challenging to count protein-biomarker molecules present in a small droplet of biological samples. Herein, we propose a gold nanoparticle (GNP) probe-assisted sandwich-counting strategy that relies on a GNP probe, an antibody-functionalized chip to "count" antigen molecules using a scanning electron microscope. Both standard carcinoembryonic antigen (CEA) and two real CEA-related tumor samples (tumor tissues and serum) were assayed to demonstrate the proof-of-concept of the counting strategy. Results show that our method is excellently correlative with enzyme-linked immuno-sorbent assay (ELISA) that is widely used in clinics for antigen or antibody detection and the limit of detection of our enumeration strategy reaches down to 0.045 ng/mL, which is ∼40 times more sensitive than the conventional ELISA. Therefore, our GNP probe-assisted sandwich-counting strategy has the potential to be used for quantification of protein biomarkers at ultralow concentrations in early tumor specimens and detection of target proteins in much diluted concentrations.

Magnetic Cell-Scaffold Interface Constructed by Superparamagnetic IONP Enhanced Osteogenesis of Adipose-Derived Stem Cells.

One of the key factors in tissue engineering and regenerative medicine is to optimize the interaction between seed cells and scaffolds such that the cells can grow in naturally biomimetic conditions. Their similarity to macromolecules and many unique properties mean that functional nanoparticles have promising potential for the modification and improvement of traditional scaffolds to obtain excellent biocompatibility, tunable stiffness, physical sensing, and stimulus-response capabilities. In the present study, we report magnetic poly(lactic- co-glycolic acid)/polycaprolactone (PLGA/PCL) scaffolds that were fabricated using a combination of the electrospinning technique and layer-by-layer assembly of superparamagnetic iron oxide nanoparticles (IONPs). PLGA/PCL scaffolds assembled with gold nanoparticles were prepared using the same method for comparison. The results showed that the assembled film of nanoparticles on the surface greatly enhanced the hydrophilicity and increased the elastic modulus of the scaffold, which subsequently improved the osteogenesis of the stem cells. Furthermore, the magnetic property of the IONPs proved to be the key factor in enhancing osteogenic differentiation, which explained the superior osteogenic capacity of the magnetic scaffolds compared with that of the gold nanoparticle-assembled scaffold. These results demonstrated the importance of magnetic nanomaterials as a bioactive interface between cells and scaffolds and will promote the design of biomaterials to improve tissue engineering and regenerative medicine efficacy.

Roles of PIP2 in the membrane binding of MIM I-BAR: insights from molecular dynamics simulations.

In order to probe the roles of PIP2 in the interactions between MIM I-BAR and model membranes, we performed a series of 10 µs-scale coarse-grained molecular dynamics simulations. Our results indicate that PIP2 plays predominant roles in the membrane binding of MIM I-BAR in a concentration-dependent manner and via electrostatic interactions. Besides, we find that the occurrence of the membrane curvature may induce the re-distribution of lipids in the membrane and result in the local enrichment of PIP2 at negatively curved membrane areas. Combining these roles of PIP2 in the membrane binding of MIM I-BAR helps explain how MIM I-BAR senses negative curvature and, thus, contributes to maintaining membrane protrusions.

Synthesis of Magnetic Wood Fiber Board and Corresponding Multi-Layer Magnetic Composite Board, with Electromagnetic Wave Absorbing Properties.

With the rapid growth in the use of wireless electronic devices, society urgently needs electromagnetic wave (EMW) absorbing material with light weight, thin thickness, wide effective absorbing band width, and strong absorption capacity. Herein, the multi-layer magnetic composite boards are fabricated by hot-pressing magnetic fiber boards and normal veneer layer-by-layer. The magnetic fibers obtained using in-situ chemical co-precipitation are used to fabricate magnetic fiber board by hot-pressing. The magnetic wave absorbing capacities of the magnetic fiber boards obtained with 72 h impregnation time exhibit strongest adsorption capacities of −51.01 dB with a thickness of 3.00 mm. It is proved that this outstanding EMW absorption property is due to the strongest dielectric loss, the optimal magnetic loss, and the dipole relaxation polarization. Meanwhile, the EMW absorbing capacities of the corresponding multi-layer composite magnetic board increases from −14.14 dB (3-layer) to −60.16 dB (7-layer). This is due to the generated multi-interfaces between magnetic fiber board and natural wood veneer in the EMW propagation direction, which significantly benefit multireflection and attenuation of the incident waves. The results obtained in this work indicate that natural wood fibers are of great potential in the fabrication of magnetic multi-layer boards treated as EMW absorbers via a low cost, green, and scalable method.