Root canal debridement using manual dynamic agitation or the EndoVac for final irrigation in a closed system and an open system.

AIM: This study examined canal debridement efficacy by testing the null hypothesis that there is no difference between a 'Closed' and an 'Open' system design in smear layer and debris removal using either manual dynamic agitation or the EndoVac for irrigant delivery. METHODOLOGY: Forty teeth were divided into four groups and submitted to a standardized instrumentation protocol. Final irrigation was performed with either manual dynamic agitation or the EndoVac on groups of teeth with or without a sealed apical foramen. Smear and debris scores were evaluated using SEM and analysed using Cochran-Mantel-Haenszel statistic. RESULTS: The ability of manual dynamic agitation to remove smear layer and debris in a closed canal system was significantly less effective than in an open canal system and significantly less effective than the EndoVac (P<0.001). CONCLUSION: The null hypothesis was rejected; the presence of a sealed apical foramen adversely affected debridement efficacy when using manual dynamic agitation but not the EndoVac. Apical negative pressure irrigation is an effective method to overcome the fluid dynamics challenges inherent in closed canal systems.

Canal and isthmus debridement efficacies of two irrigant agitation techniques in a closed system.

AIM: To compare canal and isthmus debris debridement efficacies of the manual dynamic irrigation (MDI) and apical negative pressure (ANP) techniques in the mesial root of mandibular first molars with narrow isthmi, using a closed canal design. METHODOLOGY: Micro-computed tomography was employed to select 20 teeth, each containing a narrow isthmus. Each root was sealed at the apex with hot glue and embedded in polyvinylsiloxane to simulate a closed canal system. The teeth were submitted to a standardized instrumentation protocol. Final irrigation was performed with either the MDI or the ANP technique using the EndoVac system (N=10). Masson trichrome-stained sections were prepared from completely demineralized roots at 10 canal levels between 1 and 2.8mm of the anatomical apices. Areas occupied by canals and isthmus of each root and debris in the corresponding regions were digitized by the NIH Image J software and statistically analysed using two-way repeated measures anova. RESULTS: For the instrumented canals, there were no differences between the two groups (P=0.131) in the area occupied by debris at all canal levels (P=0.343). Conversely, for the isthmus, less debris was found in the ANP group (P<0.001) but no differences were seen in each group with respect to the 10 canal levels (P=0.352). CONCLUSION: Neither technique completely removed debris from the isthmus regions. However, the EndoVac system, which encompasses the ANP concept, removed considerably more debris from narrow isthmi in mandibular mesial roots.

Shear bond strength of Resilon to a methacrylate-based root canal sealer.

AIM: To evaluate the adhesive strength of Resilon to Next root canal sealant (Heraeus-Kulzer), a methacrylate-based root canal sealer, using a modified microshear bond testing design. METHODOLOGY: Flat Resilon surfaces of different roughnesses (smooth surface and surface roughness equivalent to 320-grit and 180-grit) were prepared by compression moulding for bonding to the sealer and compared with a composite control. The shear strength data were statistically analysed using Kruskal-Wallis one-way anova on ranks and Dunn's multiple comparison tests (alpha = 0.05). After shear testing, fractured specimens were examined using a field emission-scanning electron microscope for detailed analysis of the failure modes. RESULTS: The composite control exhibited significantly higher mean shear strength (7.62 MPa) that was 4.4-4.7 times those of the Resilon groups (1.64-1.74 MPa; P < 0.001). Increasing the surface roughness of the Resilon surface did not contribute to further improvement in shear bond strength for this methacrylate-based sealer (P > 0.05). Failure modes in the composite control were cohesive and mixed failures, while those in the Resilon groups were predominantly adhesive failures, with a small percentage of mixed failures. Ultrastructural evidence of phase separation of polymeric components could be identified in Resilon. Both intact, non deformed and plastically deformed Resilon surfaces could be observed in specimens that exhibited adhesive failures. CONCLUSION: The low shear strength of Resilon to a methacrylate-based sealer compared with a composite control suggests that the amount of dimethacrylate incorporated in this filled, polycaprolactone-based thermoplastic composite may not yet be optimized for effective chemical coupling to methacrylate resins.

Effects of eugenol on resin bond strengths to root canal dentin.

The purpose of this study was to compare the regional bond strengths of C&B Metabond resin to root canal dentin, with or without treatment using a eugenol-containing endodontic sealer liquid. Eighteen extracted human canines were decoronated at the cementoenamel junction with a slow speed saw. The apical third of the root was removed leaving the cervical and middle dentin. The canal space was then enlarged with files, Gates-Glidden burs, and parapost drills. The teeth were ground on either the mesial or distal sides, permitting direct access to the entire canal. The cervical or middle third dentin was treated with Kerr Root Canal Sealer liquid, alternating between the middle and cervical thirds. Each tooth served as its own control. The adhesive resin was then luted directly to the prepared canal. Specimens, 1 x 1 x 8 mm, were prepared and mounted to a Vitrodyne testing machine enabling microtensile bond strengths to be measured. Data were analyzed using a two-way ANOVA and the least squares means test. The mean microtensile bond strengths for the cervical and middle third dentin treated with eugenol were 13.6 +/- 6.1 MPa (n = 33) and 14.8 +/- 3.9 MPa (n = 29), respectively. Without the eugenol, the mean bond strengths were 18.1 +/- 6.0 MPa (n = 31) and 17.3 +/- 4.6 MPa (n = 31) for the cervical and middle sections. The specimens treated with the eugenol liquid had significantly lower bond strengths than those without eugenol (p < 0.05) only in the cervical third. The region of the tooth tested had no effect on bond strength. That is, bond strength of the cervical third was not significantly different from bond strength on the middle third in either of the two groups (with or without eugenol) tested.

In vitro bacterial penetration of endodontically treated teeth coronally sealed with a dentin bonding agent.

This study evaluated the effectiveness of a dentin bonding agent as a barrier to prevent coronal microleakage and examined the effect of a eugenol-based sealer on the sealing ability of this resin adhesive. Fifty-one extracted human mandibular molars were incorporated in a model system using an oral streptococci as a microbial marker. Group 1 consisted of 15 teeth that were obturated with only gutta-percha and received a coronal barrier of Clearfil Liner Bond 2V. Group 2 was identical to group 1, but included the use of a eugenol-based sealer in the obturation. Group 3 consisted of 15 teeth that were obturated with gutta-percha and sealer, but did not receive a coronal barrier. Six teeth served as controls. Bacterial penetration was monitored for 90 days. Results were analyzed after 30, 60, and 90 days with Fisher's exact test (p < 0.05). All controls behaved as expected. Neither group 1 nor group 2 exhibited any bacterial leakage. Eleven of the 15 specimens in group 3 leaked between 15 and 76 days. The coronal barriers in group 1 and group 2 were significantly better in preventing coronal microleakage at 60 days (p = 0.002) and 90 days (p = 0.00005). The presence of eugenol in the sealer had no significant effect on the sealing ability of Clearfil Liner Bond 2V (p = 1).

Measurement of endodontic file lengths: calibrated versus uncalibrated digital images.

This in vitro study compared the accuracy of file length measurements made on calibrated and uncalibrated direct digital images. Endodontic files of known lengths and ISO sizes were used in 10 single-rooted, relatively straight teeth within cadaver specimens. The crowns of the teeth were ground flat and an orthodontic wire of known length was secured to the coronal surface. This wire was placed mesiodistally and perpendicular to the root and served as the reference point for the file measurement and as a calibration reference length. A #20 file was hand-measured to a length that reached the apical third of each tooth. It was inserted and a radiographic image was secured. The instrument was remeasured three additional times at different lengths on the same tooth and reinserted before each image acquisition. Thus 40 digital images were acquired using a GE X-ray unit and a Schick Computed Dental Radiography (CDR) #2 sensor. These images were placed in random order, and an independent, blinded investigator determined the file lengths using on-screen calibrated and uncalibrated measurement of the CDR image with a straight-line and multiple-line measuring technique. The experimental measurements were compared with each other and with the known clinical measurements. A two-way analysis of variance indicated that there was a statistically significant difference showing that the calibrated measurements were more accurate than the uncalibrated measurements (p = 0.0001), and there was no significant difference between the straight-line and multiple-line measuring techniques (p = 0.14).

Interpretation of artificial and in vivo periapical bone lesions comparing conventional viewing versus a video conferencing system.

The purpose of this study was to compare the interpretation of conventional radiographs transmitted by a video teleconferencing system to conventional viewbox interpretation for both artificial and in vivo periapical bone lesions. A total of 30 radiographic images were used in this study: 20 radiographic images of artificial lesions and 10 radiographs from actual patients. Two endodontists evaluated the 30 images by giving a "yes" or "no" response when determining whether a periapical lesion was present on the radiograph. The study was conducted in two sessions, separated by a 6-wk interval to minimize evaluator recall. Results of the study revealed no statistical difference between the ability of the evaluator to identify periapical bone lesions using conventional radiographs on a viewbox and his ability to interpret the same images transmitted on a monitor screen.

Measurement of endodontic file lengths: a density profile plot analysis.

The purpose of this study was to evaluate measurements of endodontic files of known length and diameter using a density profile plot analysis of digital images. Ten single-rooted teeth with relatively straight roots in cadaver specimens were used. The crowns of the teeth were removed and a rectangular orthodontic wire, 5.13 mm in length, was placed horizontally on the occlusal surface to serve as a calibration reference point. The #8, #10, #15, and #20 FlexOFiles were measured to the nearest 0.5 mm and then placed to four working lengths that terminated within the apical third of each root. A GE X-ray unit and a Schick CDR #2 sensor were used to digitally acquire 160 images. The digital images were placed in random order and an independent, blinded investigator determined the file length using a density profile plot analysis. The measurements generated by the histogram analysis (experimental) were compared with the original clinical measurements. The paired t test, intraclass correlation coefficient, and the Bradley-Blackwood test were used to assess reliability. The results revealed that the means of the experimental measurements of all file sizes were within 0.5 mm of the known lengths and were always shorter than the known lengths. Also, the larger the file size the less deviation from the known lengths: #20, -0.16 mm (p = 0.0001); #15, -0.21 mm (p = 0.0001); #10, -0.34 mm (p = 0.0001); and #8, -0.45 mm (p = 0.0001). This study demonstrated that the density profile plot analysis might be a useful adjunct for the measurement of endodontic file lengths on a digital image.

Effect of varying the depth of heat application on the adaptability of gutta-percha during warm vertical compaction.

The purpose of this study was to compare the adaptability of gutta-percha after varying the depth of heat application in the obturation of a set of standard root canals. A split-tooth model was constructed using a human maxillary central incisor. The root canal was cleaned and shaped using a step-back preparation to a size #60 FlexOFile at the working length (WL). Five shallow depressions were produced on the root canal wall. Twenty obturations without sealer were performed for each technique (thermoplasticized injectable (TI), lateral condensation, and warm vertical compaction (WVC) with heat applications at 3, 4, 5, and 7 mm from the WL). After each obturation the model was separated and the mesial and distal sides of each obturation were examined and videotaped at x 32 magnification. The quality of the obturation was graded based on the replication to the WL, replication of the artificial depressions, surface adaptation, and homogenicity of the gutta-percha. The Kruskal-Wallis analysis and the Student-Newman-Keuls tests indicated that all the techniques were significantly different from each other (p < 0.05) except for the TI group versus the WVC group with the heat application to within 3 mm from the WL (p > 0.05). The TI technique was ranked best followed by the WVC with heat applications at 3, 4, 5, and 7 mm. The lateral condensation technique received the lowest ranking.

Root canal morphology of human maxillary and mandibular third molars.

The anatomy of third molars has been described as unpredictable. However restorative, prosthetic, and orthodontic considerations often require endodontic treatment of third molars in order for them to be retained as functional components of the dental arch. The purpose of this study was to investigate and characterize the anatomy of maxillary and mandibular third molars. One hundred fifty maxillary and 150 mandibular extracted third molars were vacuum-injected with dye, decalcified, and made transparent. The anatomy of the root canal system was then recorded. Seventeen percent of mandibular molars had one root (40% of which contained two canals), 77% had two roots, 5% had three roots, and 1% had four roots. Teeth with two roots exhibited highly variable canal morphology, containing from one to six canals, including 2.2% that were "C-shaped." Fifteen percent of maxillary molars had one root, 32% had two roots, 45% had three roots, and 7% had four roots. Teeth with one root demonstrated the most unusual morphology, with the number of canals varying from one to six. An in vivo study of the canal morphology of treated third molars is suggested to provide the practitioner with an understanding of the clinical implications of third molar root anatomy.

A comparison of root fracture resistance using two root canal sealers.

AIM: The aim of this study was to compare in vitro root fracture resistance following root canal filling with either Ketac-Endo or Roth's root canal sealer. METHODOLOGY: The roots of 40 teeth with single canals were instrumented and placed randomly into four groups of 10 teeth. The prepared canals were obturated with lateral compaction using gutta-percha and Roth's 801 sealer, lateral compaction and Ketac-Endo sealer or with a single cone and Ketac-Endo sealer; the fourth group acted as unfilled controls. The roots were stored for 2 weeks in 100% humidity prior to being mounted in acrylic resin blocks. A steel tipped rod attached to an Instron testing machine was positioned against the canal opening and a slowly increasing force was applied until root fracture occurred. The results were subjected to statistical analysis using Kruskal-Wallis one-way ANOVA. RESULTS: There were no significant differences between the groups in terms of force required to vertically fracture the roots. CONCLUSIONS: Under the conditions of this study, the use of Ketac-Endo sealer in conjunction with lateral compaction or single-cone obturation techniques does not increase the fracture resistance of root-filled teeth.

Sex hormone receptor status of the dental pulp and lesions of pulpal origin.

OBJECTIVE: The purpose of this study was to determine whether the dental pulp and lesions of pulpal origin (eg, pulp polyps, periapical granulomas, and periapical cysts) exhibit receptors for the sex steroid hormones estrogen, progesterone, and androgen. STUDY DESIGN: Staining for the receptors of the hormones estrogen, progesterone, and androgen was accomplished through use of available immunohistochemical detection techniques. Pulpal tissues were obtained from freshly extracted human third molars; the other tissues were obtained from the Oral and Maxillofacial Pathology Laboratory archives. Ten samples of each tissue were processed and immunostained for these specific receptors. RESULTS: Staining for estrogen and androgen receptors was essentially negative for all cell populations examined. However, positive progesterone receptor staining of varying degrees was noted in 8 of 10 pulpal specimens. Primarily, pulpal fibroblasts and odontoblasts exhibited positive immunoreactivity. CONCLUSIONS: The results of this study suggest that although the dental pulp may be a potential target tissue for progesterone, evidence is lacking with respect to the other sex steroid hormones.

Use of the microscope in endodontics: a report based on a questionnaire.

A survey regarding operating microscope (OM) usage and training was mailed to 3356 active members of the American Association of Endodontists (AAE) in the United States. Data from 2061 questionnaires indicate that 52% of the endodontists surveyed have access to and use the OM in their practice. The frequency of use as a function of years since completing endodontic training was as follows: < 5 yr, 71%; 6 to 10 yr, 51%; and > 10 yr, 44%. The OM was used most often for retrieval of separated instruments, root-end preparations, and root-end fillings. Of the respondents who use the OM, 36% report they do not use it as often as anticipated. The most common reasons reported were positional difficulties, inconvenience, and increased treatment time. The information collected from the survey reveals that the more training the operator has on the microscope, the more likely he or she is to use it for all procedures.

Photoelastic comparison of stress induced by using stainless-steel versus nickel-titanium spreaders in vitro.

The vertical force applied to an endodontic spreader generates stress along the canal walls. Recognizing the potential for this stress may reduce the incidence of vertical root fractures. A photoelastic acrylic model was fabricated to exhibit the stress produced during obturation of curved canals using the lateral condensation technique. Twenty standardized models simulating curved canals (32 degrees) were formed within PL-2 photoelastic acrylic resin blocks. The canals were fitted with a gutta-percha point, and either a stainless-steel or nickel-titanium finger spreader was inserted. An Instron 4502 universal testing machine applied a vertical force of 20 Newtons to the spreader. Quarter wave and polarizing filters were used with backlighting to generate the fringe patterns in the models. Photographs of the resulting stress lines showed that the stainless-steel spreaders created three areas of concentrated stress. The nickel-titanium spreaders induced stress patterns spread out along the surface of the canals, thus reducing the concentration of stress and the potential for vertical root fracture.

Nickel-titanium versus stainless-steel finger spreaders in curved canals.

Placement of endodontic spreaders to within 1 to 2 mm of the root canal working length has been advocated for optimum gutta-percha obturation. Due to their stiffness, stainless-steel (SS) spreaders will often fail to achieve this position in curved canals. Newly marketed nickel-titanium (NiTi) spreaders may offer an advantage in this regard due to the increased flexibility of these instruments. Seventy mesial and distal mandibular molar canals were instrumented to a #35 master apical file size. Measurements of the canal curvature were made from preoperative radiographs. Canal curvature angles ranged from 0 to 51 degrees. The teeth were placed in a radiographic mount to ensure a constant focal length, and postoperative radiographs were exposed with comparably sized SS and NiTi spreaders inserted into each prepared canal. Measurements of spreader tip to apex distance were made with a micrometer to the nearest 0.02 mm on the radiographs. Using a t test for paired samples, it was shown that NiTi spreaders penetrated to a significantly greater depth than SS spreaders in curved canals (p < 0.001).

Interpretation of periapical lesions comparing conventional, direct digital, and telephonically transmitted radiographic images.

The purpose of this study was to evaluate direct digital radiography (DDR) and telephonically transmitted images versus conventional radiography in the interpretation of artificial periapical bone lesions. Five teeth were chosen from four cadaver jaw specimens. Three types of DDR images were evaluated: DDR stored images, DDR transmitted images, and DDR reversed images. A total of 150 DDR computer monitor images and 56 D-speed film images were evaluated by three endodontists and one endodontic graduate student. The Wilcoxon signed-ranks test was used for statistical analyses of the results. DDR reversed images were statistically inferior to DDR stored images, DDR transmitted images, and conventional radiography images (p < 0.0001). There were no statistically significant differences between DDR stored images, DDR transmitted images, and conventional film images in the ability of the evaluator to identify artificial periapical bone lesions (p > 0.05).

Cleaning of endodontic files, Part I: The effect of bioburden on the sterilization of endodontic files.

Ninety-two new endodontic files were randomly assigned to five groups with varying parameters of contamination, cleaning method, and sterilization (steam or chemical). Files were instrumented in bovine teeth to accumulate debris and a known contaminant, Bacillus stearothermophilus. Positive controls produced growth on both T-soy agar plates and in T-soy broth. Negative controls and experimental files (some with heavy debris) failed to produce growth. The results showed that there was no significant difference between contaminated files that were not cleaned before sterilization and contaminated files that were cleaned before sterilization. Bioburden present on endodontic files does not appear to affect the sterilization process.

Successful single-visit endodontics during Operation Desert Shield.

This article reports on the incidence of success following single-visit endodontic therapy. Non-surgical endodontic therapy was performed on 210 teeth in 167 patients who were rapidly deployed during the initial stages of Operation Desert Shield. Upon their return, 97 patients were recalled for follow-up evaluation. This study evaluated 102 teeth. The recall rate was 58% with a success rate of 89%.

A two-rooted mandibular incisor.

A case report is presented demonstrating a two-rooted mandibular incisor. Because of prosthetic considerations, endodontic therapy was not performed and the tooth was extracted. However, this case reinforces the importance of proper radiographic techniques and interpretation in detecting radicular anomalies.

A 2-day decompression: a case report of a maxillary first molar.

A case report of a maxillary first molar is presented in which a drainage tube from a decompression procedure was removed 2 days following placement. The oral surgeon who removed the tube scheduled the patient for surgical enucleation of the large periapical lesion. The surgical appointment was subsequently cancelled and routine endodontic follow-up showed continued osseous repair at 3, 6, and 12 months. The decompression of a large periapical lesion is a conservative alternative to surgical enucleation.