Assessment of a New Medical Device (PirifixTM) for Positioning and Maintaining the Upper Dental Arch during Le Fort I Osteotomy.

INTRODUCTION: Several medical devices (MDs) are used to assist surgeons in positioning the upper dental arch (UDA) during Le Fort I osteotomies (LFIOs). Some only allow holding, others only positioning. This study aimed to assess the accuracy of a new MD (PirifixTM) coupling these two functions during LFIO on 3D-printed models. MATERIALS AND METHODS: DICOM data were selected from patients who underwent surgical planning for LFIO between 27 July 2020 and 1 December 2022. Their anatomy was reproduced after segmentation, planning, and stereolithography in two models. Each model was assigned to one of two surgical groups: the control group (positioning by occlusal splint) and the PirifixTM group. Each patient's model was planned with the objective of horizontalizing and recentering the UDA. After positioning, models were digitalized using Einscan Pro 2X and compared to the planned model with CloudCompare. The statistical analysis was performed using the Wilcoxon Mann-Whitney test. The result was considered significant if the p-value was less than 0.05. RESULTS: Twenty-one patients were selected. Forty-two anatomical models were 3D-printed. The mean difference compared to the planned and corrected positions was 0.69 mm for the control group and 0.84 mm for the PirifixTM group (p = 0.036). CONCLUSION: PirifixTM may be a new alternative to available MDs. Further investigations are needed to describe the relationship between the device and facial soft tissues.

An innovative 3D hydroxyapatite patient-specific implant for maxillofacial bone reconstruction: A case series of 13 patients.

The study aimed to evaluate and discuss the use of an innovative PSI made of porous hydroxyapatite, with interconnected porosity promoting osteointegration, called MyBone Custom® implant (MBCI), for maxillofacial bone reconstruction. A multicentric cohort of 13 patients underwent maxillofacial bone reconstruction surgery using MBCIs for various applications, from genioplasty to orbital floor reconstruction, including zygomatic and mandibular bone reconstruction, both for segmental defects and bone augmentation. The mean follow-up period was 9 months (1-22 months). No infections, displacements, or postoperative fractures were reported. Perioperative modifications of the MBCIs were possible when necessary. Additionally, surgeons reported significant time saved during surgery. For patients with postoperative CT scans, osteointegration signs were visible at the 6-month postoperative follow-up control, and continuous osteointegration was observed after 1 year. The advantages and disadvantages compared with current techniques used are discussed. MBCIs offer new bone reconstruction possibilities with long-term perspectives, while precluding the drawbacks of titanium and PEEK. The low level of postoperative complications associated with the high osteointegration potential of MBCIs paves the way to more extensive use of this new hydroxyapatite PSI in maxillofacial bone reconstruction.

Are 3D-printed anatomical models of the ear effective for teaching anatomy? A comparative pilot study versus cadaveric models.

PURPOSE: Despite the combination of chalkboard lectures and cadaveric models, the ear remains a complex anatomical structure that is difficult for medical students to grasp. The aim of this study was to evaluate the contribution of a 3D-printed ear model for educating undergraduate medical students by comparing it with a conventional cadaveric model. METHODS: Models of the ear comprising the outer ear, tympanic membrane, ossicles and inner ear were modeled and then 3D-printed at 6:1 and 10:1 scales based on cadaveric dissection and CT, cone-beam CT and micro/nano CT scans. Cadaveric models included two partially dissected dry temporal bones and ossicles. Twenty-four 3rd year medical students were given separate access to cadaveric models (n = 12) or 3D-printed models (n = 12). A pre-test and two post-tests were carried out to assess knowledge (n = 24). A satisfaction questionnaire focusing solely on the 3D-printed model, comprising 17 items assessed on a 5-point Likert scale, was completed by all study participants. A 5-point Likert scale questionnaire comprising four items (realism, color, quality and satisfaction with the 3D-printed ear model) was given to three expert anatomy Professors. RESULTS: The test scores on the first post-test were higher for the students who had used the 3D-printed models (p < 0.05). Overall satisfaction among the students and the experts was very high, averaging 4.7 on a 5-point Likert-type satisfaction scale. CONCLUSION: This study highlights the overall pedagogical value of a 3D-printed model for learning ear anatomy.

Persistent myogenic temporomandibular disorders: Are navigation-guided botulinum toxin-A injections into the lateral pterygoid muscles effective?

BACKGROUND: Botulinum toxin has proven effective in treating persistent myogenous temporomandibular disorders (M-TMDs) unresponsive to conservative therapies. While the usual injection sites are the masseter and temporalis muscles, the deeper lateral pterygoid muscle (LPM) is often overlooked due to its difficulty of access and the risk of local complications. This study aims to evaluate the effectiveness of botulinum toxin-A injections (BTX-A) in the LPM with MR-guided navigation of patients with persistent M-TMDs. METHODS: This retrospective study enrolled 34 patients suffering from M-TMDs despite conservative therapies with a total of 51 injection sessions. All of them were treated by BTX-A injections in the LPM using MR-guided navigation, masseter and temporalis with clinical guidance. The effectiveness of the treatment was evaluated with measures of maximum pain-intensity scores of breakthrough and background pain, maximal interincisal mouth opening (MIO), and the presence of joint sounds. The assessment was conducted before injections, and subsequently, at 1 and 3 months postoperatively. Adverse events and perception of improvement with the treatment were also reported for each injection sessions. RESULTS: BTX-A injections in the LPM significantly improved pain scores intensity with a reduction of 65 % and 49 % respectively at the 1- and 3-month follow-ups, with peak effectiveness at 1 month. This study showed also a statistically significant improvement in mean MIO at 3 months post-injection and a decrease in joint sounds with persistence in 9,7 % of cases at 3-month follow-up compared to 41,2 % at baseline. No significant adverse events were observed. Patients treated with BTX-A injections in the LPM had a subjective complete improvement in their perception of treatment efficacy in 63 % of cases at the end of the follow-up period. CONCLUSIONS: This study reports clinical experience on the use of MR-guided navigation to perform accurate, reliable, and safe BTX-A injections in the LPM. Although our results appear to be encouraging regarding symptom improvement of patients suffering from persistent M-TMDs, this approach may not be feasible as a primary standard procedure for managing M-TMDs. Further research is necessary to explore potential reproducible, safe, and cost-effective alternatives to enhance the accessibility of the LPM in clinical practice.

3D printing as a pedagogical tool for teaching normal human anatomy: a systematic review.

BACKGROUND: Three-dimensional-printed anatomical models (3DPAMs) appear to be a relevant tool due to their educational value and their feasibility. The objectives of this review were to describe and analyse the methods utilised for creating 3DPAMs used in teaching human anatomy and for evaluating its pedagogical contribution. METHODS: An electronic search was conducted on PubMed using the following terms: education, school, learning, teaching, learn, teach, educational, three-dimensional, 3D, 3-dimensional, printing, printed, print, anatomy, anatomical, anatomically, and anatomic. Data retrieved included study characteristics, model design, morphological evaluation, educational performance, advantages, and disadvantages. RESULTS: Of the 68 articles selected, the cephalic region was the most studied (33 articles); 51 articles mentioned bone printing. In 47 articles, the 3DPAM was designed from CT scans. Five printing processes were listed. Plastic and its derivatives were used in 48 studies. The cost per design ranged from 1.25 USD to 2800 USD. Thirty-seven studies compared 3DPAM to a reference model. Thirty-three articles investigated educational performance. The main advantages were visual and haptic qualities, effectiveness for teaching, reproducibility, customizability and manipulability, time savings, integration of functional anatomy, better mental rotation ability, knowledge retention, and educator/student satisfaction. The main disadvantages were related to the design: consistency, lack of detail or transparency, overly bright colours, long printing time, and high cost. CONCLUSION: This systematic review demonstrates that 3DPAMs are feasible at a low cost and effective for teaching anatomy. More realistic models require access to more expensive 3D printing technologies and substantially longer design time, which would greatly increase the overall cost. Choosing an appropriate image acquisition modality is key. From a pedagogical viewpoint, 3DPAMs are effective tools for teaching anatomy, positively impacting the learning outcomes and satisfaction level. The pedagogical effectiveness of 3DPAMs seems to be best when they reproduce complex anatomical areas, and they are used by students early in their medical studies.

Hybrid workflow for custom-made medical devices: A case report about nasal reconstruction.

Specialist industries usually develop custom-made medical devices outside a medical structure at the request of a healthcare professional. Access to 3D-printing technology with dedicated softwares in hospitals allow surgeons to perform virtual surgery leading to safer and more precise surgery. The authors present the hybrid workflow that combined the skills of surgeons, engineers and manufacturers to create titanium custom-made cutting guide and implants to reconstruct the nasal bone after the resection of an intraosseous hemangioma. This process aimed to optimize pre-operative planning, to improve precision, to predict the esthetic results of reconstruction. Moreover, it leads to a reduction of manufacturing time and the overall costs of surgery and to achieve genuine custom-made care.

The epidemiology and management of odontomas: a European multicenter study.

INTRODUCTION: Odontoma is the most commonly diagnosed odontogenic tumor of the oral cavity. The objective of the present study was to assess the demographic variables, patterns, diagnostic features, and management issues of odontomas treated at several European departments of maxillofacial and oral surgery. MATERIALS AND METHODS: This study was conducted at 8 European departments of oral surgery between January 1, 2004, and December 31, 2018. Only patients with odontomas were included. The following data were recorded for each patient: gender, age, comorbidities, site, size of odontomas, radiographic features, type of odontoma, treatment of odontomas, treatment of associated teeth, complications, and recurrence. RESULTS: A total of 127 patients (70 male and 57 female patients) with odontomas were included. The mean age was 22 years; 71 odontomas were found in the mandible, whereas 56 in the maxilla. In the mandible, the most frequently involved subsite was the parasymphysis, while in the maxilla, the most common subsite was the upper incisor region. The mean size of included odontomas was 15.3 mm. On the whole, 62 complex odontomas, 50 compound odontomas, and 15 mixed-type odontomas were observed. Complete excision of the odontomas was performed in 121 patients. In 24 patients, the extraction of deciduous teeth was performed, and in 43 patients, one or more permanent teeth were removed. Finally, in 9 patients, a partial excision of the odontoma was performed. Recurrence was observed in 4 cases out of 127 patients. CONCLUSIONS: Dental practitioners should be aware of the distinct clinical and radiographic features of odontoma in order to perform an appropriate and early diagnosis. Conventional radiography, such as panoramic radiograph, is often sufficient technique for a diagnosis after clinical suspicion or for an incidental diagnosis to prevent later complications, such as impaction or failure of eruption of teeth.

Reporting Criteria for Clinical Trials on Medication-Related Osteonecrosis of the Jaw (MRONJ): A Review and Recommendations.

Medication-related osteonecrosis of the jaw (MRONJ) is a complication caused by anti-resorptive agents and anti-angiogenesis drugs. Since we wanted to write a protocol for a randomized clinical trial (RCT), we reviewed the literature for the essential information needed to estimate the size of the active patient population and measure the effects of therapeutics. At the same time, we designed a questionnaire intended for clinicians to collect detailed information about their practices. Twelve essential criteria and seven additional items were identified and compiled from 43 selected articles. Some of these criteria were incorporated in the questionnaire coupled with data on clinical practices. Our review found extensive missing data and a lack of consensus. For example, the success rate often combined MRONJ stages, diseases, and drug treatments. The occurrence date and evaluation methods were not harmonized or quantitative enough. The primary and secondary endpoints, failure definition, and date coupled to bone measurements were not well established. This information is critical for writing a RCT protocol. With this review article, we aim to encourage authors to contribute all their findings in the field to bridge the current knowledge gap and provide a stronger database for the coming years.

Human amniotic membrane application in oral surgery-An ex vivo pilot study.

Objectives: The purpose of this pilot porcine study was to explore and illustrate the surgical application of human amniotic membrane (hAM) in an ex vivo model of medication-related osteonecrosis of the jaw (MRONJ). Material and methods: Five oral and maxillofacial surgeons participated to this study. MRONJ was simulated on porcine mandible specimens. hAM was applied using four different techniques: implantation with complete coverage, implantation with partial coverage, apposition and covering graft material. At the same time, the surgeons evaluated how well the hAM handled and its physical properties during the surgery. Results: Surgeons found that hAM had suitable mechanical properties, as it was easy to detach from the support, handle, bind to the defect and bury. hAM was also found to be strong and stable. The "implantation with complete coverage" and "implantation with partial coverage" techniques were the preferred choices for the MRONJ indication. Conclusion: This study shows that hAM is a graft material with suitable properties for oral surgery. It is preferable to use it buried under the gingiva with sutures above it, which increases its stability. This technical note aims to educate surgeons and provide them with details about the handling of hAM in oral surgery. Clinical relevance: Two surgical techniques for hAM application in MRONJ were identified and illustrated. hAM handling and physical properties during surgery were reported.

Does Penicillin Allergy Increase the Risk of Surgical Site Infection after Orthognathic Surgery? A Multivariate Analysis.

This study aimed to demonstrate an association between the occurrence of surgical site infection (SSI) after orthognathic surgery and penicillin allergy and to assess whether other factors could be associated with the occurrence of SSI. A 10-year monocentric retrospective study was conducted to identify possible risk factors for SSI in orthognathic surgery. Bivariate analyses were performed using Fisher, Student, or Wilcoxon tests and multivariate analyses using logistic regression. Two hundred and sixty-six patients were included, and 3.5% had SSI. Bivariate analyses revealed a significant association between SSI and age at surgery (p = 0.01), penicillin allergy (p = 0.02), and postoperative antibiotic therapy by Clindamycin (Dalacine®) (p = 0.02). Multivariate analyses confirmed the association between the occurrence of SSI and treatment with Clindamycin (Dalacine®) or Clindamycin (Dalacine®) and Metronidazole (Flagyl®) postoperatively (p = 0.04). Antibiotic therapy with Clindamycin (Dalacine®) seems to be associated with a higher rate of SSI, and the mandible was the only site affected by SSI.

[Temporomandibular joint dysfunctions: evolution in patient care]. / Dysfonction de l'articulation temporo-mandibulaire: modification de la prise en charge.

Temporomandibular joint dysfunctions are a frequently occurring condition that can have a considerable impact on the quality of life. The treatment modalities vary according to the anatomical involvement and symptomatology of the patient. Conservative and surgical management is still controversial and has evolved significantly in recent decades. The temporomandibular joint prosthesis is one of them. Through improvements in material and case management, the joint prosthesis has gained in popularity and has moved from being a treatment of last resort to being part of standard management.

Les dysfonctions de l'articulation temporo-mandibulaire sont une pathologie à incidence fréquente qui peut avoir un impact considérable sur la vie quotidienne. Leur traitement varie selon l'atteinte anatomique et la symptomatologie du patient. La prise en charge conservatrice et chirurgicale est encore controversée et a connu une évolution notable au courant des dernières décennies. Plus particulièrement, le remplacement prothétique de l'articulation, grâce à l'amélioration des matériaux et de la planification préopératoire, a gagné en popularité et est passé du traitement de dernier recours à un élément de la prise en charge standard.

Questions about Residual Cell Viability in Cryopreserved Human Amniotic Membrane and Its Impact on Clinical Applications.

We questioned the relevance of evaluating residual cell viability in human amniotic membrane (hAM) after its cryopreservation since cell survival is controversial and its ability to act as a matrix (including the presence of growth factors and cytokines) appears to be most important for tissue regeneration purposes. We also discussed the usefulness of osteodifferentiating amniotic cells in whole hAM for bone repair applications. We have evidence that determining residual cell viability after cryopreservation and hAM osteodifferentiation is not justified.

Development of a biomimetic bioreactor for regenerative endodontics research.

In the context of regenerative endodontics research with the development of biomaterials, this work aimed to develop and test a prototype biomimetic bioreactor of a human tooth. The bioreactor was designed to reproduce a shaped dental canal connected with a cavity reproducing the periapical region and irrigated through two fluidic channels intended to reproduce the apical residual vascular supply. A test biomaterial composed of polylactic acid/polycaprolactone-tannic acid (PLA/PCL-TA) was produced by electrospinning/electrospraying and calibrated to be inserted in a dental canal. This biomaterial was first used to evaluate its imbibition capacity and the oximetry inside the bioreactor. Then, Dental Pulp Stem Cells (DPSCs) were cultured on PLA/PCL-TA cones for 1-3 weeks in the bioreactor; afterward cell adhesion, proliferation, and migration were histologically assessed. Complete imbibition biomaterial was obtained in 10 min and oximetry was stable over time. In the bioreactor, DPSCs were able to adhere, proliferate and migrate onto the surface and inside the biomaterial. In conclusion, this bioreactor was used successfully to test a biomaterial intended to support pulp regeneration and constitutes a new in vitro experimental model closer to clinical reality.

Tips and Tricks and Clinical Outcome of Cryopreserved Human Amniotic Membrane Application for the Management of Medication-Related Osteonecrosis of the Jaw (MRONJ): A Pilot Study.

Medication-related osteonecrosis of the jaw (MRONJ) is a complication of certain pharmacological treatments such as bisphosphonates, denosumab, and angiogenesis inhibitors. There are currently no guidelines on its management, particularly in advanced stages. The human amniotic membrane (hAM) has low immunogenicity and exerts anti-inflammatory, antifibrotic, antimicrobial, antiviral, and analgesic effects. It is a source of stem cells and growth factors promoting tissue regeneration. hAM acts as an anatomical barrier with suitable mechanical properties (permeability, stability, elasticity, flexibility, and resorbability) to prevent the proliferation of fibrous tissue and promote early neovascularization at the surgical site. In oral surgery, hAM stimulates healing and facilitates the proliferation and differentiation of epithelial cells in the oral mucosa and therefore its regeneration. We proposed using cryopreserved hAM to eight patients suffering from cancer (11 lesions) with stage 2-3 MRONJ on a compassionate use basis. A collagen sponge was added in some cases to facilitate hAM grafting. One or three hAMs were applied and one patient had a reapplication. Three patients had complete closure of the surgical site with proper epithelialization at 2 weeks, and two of them maintained it until the last follow-up. At 1 week after surgery, three patients had partial wound dehiscence with partial healing 3 months later and two patients had complete wound dehiscence. hAM reapplication led to complete healing. All patients remained asymptomatic with excellent immediate significant pain relief, no infections, and a truly positive impact on the patients' quality of life. No adverse events occurred. At 6 months of follow-up, 80% of lesions had complete or partial wound healing (30 and 50%, respectively), while 62.5% of patients were in stage 3. Radiological evaluations found that 85.7% of patients had stable bone lesions (n = 5) or new bone formation (n = 1). One patient had a worsening MRONJ but remained asymptomatic. One patient did not attend his follow-up radiological examination. For the first time, this prospective pilot study extensively illustrates both the handling and surgical application of hAM in MRONJ, its possible association with a collagen sponge scaffold, its outcome at the site, the application of multiple hAM patches at the same time, and its reapplication.

Pre-Interventional 3D-Printing-Assisted Planning of Flow Disrupter Implantation for the Treatment of an Intracranial Aneurysm.

Intrasaccular flow disrupter devices (ISFD) have opened up new ways to treat intracranial aneurysms but choosing the correct size of ISFD can be challenging. We describe the first use of 3D printing to assist in the choice of ISFD, and we report an illustrative case. We developed a technique that uses preoperative angiography to make a plastic model of the aneurysm. We tested the deployment of different sizes of intrasaccular flow disruptor on the 3D model under fluoroscopy. The best devices were then used as the first-line strategy to treat the patient. The preoperative 3D printing helped in the successful selection of a first-line ISFD, which was not the one recommended by the manufacturer. Three-dimensional printing can provide interesting information regarding the treatment of intracranial aneurysms using ISFD. Further studies are needed to fully assess its benefits.

Wound of the Parotid Duct Following a Subcondylar Fracture.

Salivary gland and duct complications following surgical approaches to condylar fractures are well known, particularly in approaches requiring parotid tissue dissection. We report a rare case of a parotid duct wound caused by the fracture itself and due to a lateral displacement of the condylar fragment. Four days after the surgical management of a trifocal mandibular fracture (head fracture on the left side, laterally displaced condylar base and angular fracture on the right side) the patient presented with a fluctuating subcutaneous swelling in the right cheek, evoking a sialocele. The sialography showed a massive leak of iodinated contrast medium just in front of the parotid hilum, joining the subcutaneous undermining made during the approach and confirmed the diagnosis of a parotid duct wound. A pressure dressing was applied to the right mandibular angle for 2 weeks, allowing for complete remission. In conclusion, this unusual clinical case illustrates the fact that the parotid duct may be endangered in the event of condylar base fractures, not only by the surgical approach but also by the fracture itself, especially when there is severe lateral displacement.

Imaging of odontogenic keratocysts: a pictorial review.

INTRODUCTION: The aim of the present article was to review and depict the main radiological features of odontogenic keratocysts (OKCs), thus helping the differential diagnoses from other odontogenic cysts and neoplasms. EVIDENCE ACQUISITION: A review of articles published between January 2000 and October 2020 using Medline and the MeSH Term "odontogenic keratocyst" in combination with the following terms "imaging," "radiology," "panoramic radiograph," and "computed tomography," was performed. EVIDENCE SYNTHESIS: Radiographically, OKCs are well-defined unilocular or multilocular radiolucencies bounded by corticated margins. Most lesions are unilocular; instead, multilocular OKCs represent about the 30% of cases, mainly involving the posterior mandible. When, particularly in large lesions, OKCs display a multilocular presentation with adjacent satellite cysts (daughter cysts) a "soap-bubble appearance" can be recognized. DISCUSSION: Panoramic radiograph and CT still play an important role in the diagnosis and treatment planning of OKCs. Unfortunately, it may not be easy to differentiate OKCs from other odontogenic lesions, especially when they are small and unilocular. CONCLUSIONS: Histopathological findings are still necessary to obtain a definitive diagnosis.

The epidemiology and management of odontogenic keratocysts (OKCs): A European multicenter study.

The objective of the present study was to assess the epidemiology including demographic variables, diagnostic features, and the management of odontogenic keratocyst (OKCs) at several European departments of maxillofacial and oral surgery. This study is based on a systematic computer-assisted database that allowed the recording of data from treated OKCs. The following data were recorded for each patient: gender, age, voluptuary habits, comorbidities, site, size, radiographic features, treatment of OKCs, length of hospital stay, complications, recurrence, management and complications of eventual recurrence. A total of 405 patients, 249 male and 156 female, with 415 OKCs (407 sporadic and 8 syndromic lesions) were included in the study: 320 lesions were found in the mandible, whereas 95 were found in the maxilla. In the mandible, the most frequently involved subsite was the angle, whereas in the maxilla it was the molar region. The most frequently performed treatment option was enucleation plus curettage/peripheral ostectomy in 204 OKCs (recurrence rate, 9%). Decompression without residual cystectomy (recurrence rate, 66%), marsupialization with residual enucleation with the use of Carnoy's solution (recurrence rate, 50%), decompression with residual cystectomy (recurrence rate, 43%), and simple enucleation (recurrence rate, 24%) were the treatment options with the highest recurrence rates. An appropriate management of odontogenic keratocysts should be individualized, taking into consideration clinical and radiological findings, as well as patients' age and comorbidities.