Pyro-layered heterostructured nanosheet membrane for hydrogen separation.

Engineering different two-dimensional materials into heterostructured membranes with unique physiochemical properties and molecular sieving channels offers an effective way to design membranes for fast and selective gas molecule transport. Here we develop a simple and versatile pyro-layering approach to fabricate heterostructured membranes from boron nitride nanosheets as the main scaffold and graphene nanosheets derived from a chitosan precursor as the filler. The rearrangement of the graphene nanosheets adjoining the boron nitride nanosheets during the pyro-layering treatment forms precise in-plane slit-like nanochannels and a plane-to-plane spacing of ~3.0 Å, thereby endowing specific gas transport pathways for selective hydrogen transport. The heterostructured membrane shows a high H2 permeability of 849 Barrer, with a H2/CO2 selectivity of 290. This facile and scalable technique holds great promise for the fabrication of heterostructures as next-generation membranes for enhancing the efficiency of gas separation and purification processes.

Atomic layer deposition of ZnO on polypropylene nonwovens for photocatalytic antibacterial facemasks.

Addressing respiratory infectious diseases remains one of the main priorities due to the increased risk of exposure caused by population growth, increasing international travel and commerce, and most recently, the COVID-19 outbreak. In the war against respiratory diseases, facemasks are powerful tools to obstruct the penetration of microorganisms, thereby protecting the wearer from infections. Nonetheless, the intercepted microorganisms on the surface of facemasks may proliferate and lead to secondary infection. To solve this problem, atomic layer deposition is introduced to deposit uniform and mechanically robust ZnO layers on polypropylene (PP) nonwoven fabrics, a widely used raw material in fabricating facemasks. The loading of ZnO demonstrates no adverse effects on the separation performance of facemasks, and the filtration efficiency of the facemasks towards different types of nanoparticles remains higher than 98.9%. Moreover, the modified PP nonwoven fabrics are granted with excellent antibacterial activity and photocatalytic sterilization ability, which can inactivate both germ-negative and germ-positive bacteria (E. coliandS. aureus) effectively with and without light illumination. Therefore, the modified PP nonwoven fabrics are potential candidates to be used as the outer layer on facemasks and endow them with photocatalytic antibacterial activity.

Biocompatible curcumin coupled nanofibrous membrane for pathogens sterilization and isolation.

Airborne transmission of pathogens is the most probable cause for the spread of respiratory diseases, which can be intercepted by personal protective equipment such as masks. In this study, an efficient antiviral personal protective filter was fabricated by coupling the biocompatible curcumin (CCM) with nanofibrous polytetrafluoroethylene (PTFE) membrane. The CCM extracted from plants was first dissolved in acidified ethanol at a certain pH and temperature to optimize its loading concentration, antiviral activation, and binding forces on the polyethylene terephthalate (PET) support to form a pre-filtration layer at the front section of the filter. Ultrathin PTFE membrane was then fabricated on the antibacterial-antiviral PET support (A-A PET) by controllable heating lamination. This functional layer of the filter exhibits good gas permeance (3423.6 m3/(m2·h·kPa)) and ultrafine particles rejection rate (>98.79%). Moreover, the obtained A-A filter exhibit a high antibacterial rate against a variety of bacteria (E. coli, B. subtilis, A. niger, and Penicillium were 99.84%, 99.02%, 93.60%, 95.23%, respectively). Forthwith virucidal (SARS-CoV-2) efficiency of the A-A filter can reach 99.90% for 5 min. The filter shows good stability after 10 heating cycles, demonstrating its reusability.

A simple and versatile synthesis strategy of hollow MOFs for CO2 separation and catalysis.

A novel single-solvent-interfacial strategy is proposed to synthesize hollow MOFs, fabricated at the two-phase interface originated from the self-deliquescence of hydration water in the metallic precursors and the solvents with low water solubility. The as-fabricated HMOFs with hierarchically porous structures exhibit significant enhancement in CO2 separation and catalysis.

Two-dimensional N-doped Pd/carbon for highly efficient heterogeneous catalysis.

A novel two-dimensional ZIF-derived Pd@CN material prepared via one-step calcination exhibits outstanding catalytic activity in heterogeneous hydrogenation. Its well-developed porous structure, low dimensions and low density make active sites more accessible. This facile and effective strategy can guide the synthesis of highly active and durable Pd@CN catalysts with specific morphologies.

Nanoarchitectonics for Electrospun Membranes with Asymmetric Wettability.

Membranes with asymmetric wettability have attracted significant interest by virtue of their unique transport characteristics and functionalities arising from different wetting behaviors of each membrane surface. The cross-sectional wettability distinction enables a membrane to realize directional liquid transport or multifunction integration, resulting in rapid advance in applications, such as moisture management, fog collection, oil-water separation, and membrane distillation. Compared with traditional homogeneous membranes, these membranes possess enhanced transport performance and higher separation efficiency owing to the synergistic or individual effects of asymmetric wettability. This Review covers the recent progress in fabrication, transport mechanisms, and applications of electrospun membranes with asymmetric wettability and provides a perspective on future development in this important area.

Multi-cycle reversible control of gas permeability in thin film composite membranes via efficient UV-induced reactions.

This communication presents a new, UV-induced mechanism to reversibly control the permeability of ultra-thin polymer coatings. Photoreversible [2+2] cycloaddition reactions were utilised to adjust the crosslinking degree and glass transition temperature of a coating. Consequently, a 300%, reversible change in the coating's oxygen permeability was achieved without loss of performance. Ultimately, the findings demonstrate the capability of using low UV doses to reversibly and efficiently regulate mass transport through ultra-thin coatings fabricated in a facile manner.

Functionalized Boron Nitride Nanosheets: A Thermally Rearranged Polymer Nanocomposite Membrane for Hydrogen Separation.

Amino functionalized boron nitride nanosheets (FBN) were incorporated into a crosslinked, thermally rearranged polyimide (XTR) to fabricate FBN-XTR nanocomposite membrane. The FBN-XTR membrane exhibited a small decrease in H2 permeability but demonstrated a remarkably increased H2 gas selectivity over other gases, compared with XTR. The XTR membrane heat-treated at 425 °C had a H2 permeability of 210 Barrers and a H2 /CH4 separation factor of 24.1, whereas the nanocomposite membrane with 1 wt % FBN exhibited a H2 permeability of 110 Barrers and H2 /CH4 separation factor of 275, an order of magnitude greater. At 1 wt % FBN loading, the FBN-XTR membrane showed three times higher tensile strength and 60 % higher elongation than pristine XTR membrane. In addition, FBN-XTR was found to be able to be readily processed into thin-film membranes for practical H2 separation applications.

Biosensors for wastewater monitoring: A review.

Water pollution and habitat degradation are the cause of increasing water scarcity and decline in aquatic biodiversity. While the freshwater availability has been declining through past decades, water demand has continued to increase particularly in areas with arid and semi-arid climate. Monitoring of pollutants in wastewater effluents are critical to identifying water pollution area for treatment. Conventional detection methods are not effective in tracing multiple harmful components in wastewater due to their variability along different times and sources. Currently, the development of biosensing instruments attracted significant attention because of their high sensitivity, selectivity, reliability, simplicity, low-cost and real-time response. This paper provides a general overview on reported biosensors, which have been applied for the recognition of important organic chemicals, heavy metals, and microorganisms in dark waters. The significance and successes of nanotechnology in the field of biomolecular detection are also reviewed. The commercially available biosensors and their main challenges in wastewater monitoring are finally discussed.

Gas Permeation Properties, Physical Aging, and Its Mitigation in High Free Volume Glassy Polymers.

Hundreds of polymers have been evaluated as membrane materials for gas separations, but fewer than 10 have made it into current commercial applications, mainly due to the effects of physical aging and plasticization. Efforts to overcome these two problems are a significant focus in gas separation membrane research, in conjunction with improving membrane separation performance to surpass the Robeson upper bounds of selectivity versus permeability for commercially important gas pairs. While there has been extensive research, ranging from manipulating the chemistry of existing polymers (e.g., thermally rearranged or cross-linked polyimides) to synthesizing new polymers such as polymers of intrinsic microporosity (PIMs), there have been three major oversights that this review addresses: (1) the need to compare the approaches to achieving the best performance in order to identify their effectiveness in improving gas transport properties and in mitigating aging, (2) a common standardized aging protocol that allows rapid determination of the success (or not) of these approaches, and (3) standard techniques that can be used to characterize aging and plasticization across all studies to enable them to be robustly and equally compared. In this review, we also provide our perspectives on a few key aspects of research related to high free volume polymer membranes: (1) the importance of Robeson plots for membrane aging studies, (2) eliminating thermal history, (3) measurement and reporting of gas permeability and aging rate, (4) aging and storing conditions, and (5) promising approaches to mitigate aging.

Multifunctional hybrid porous filters with hierarchical structures for simultaneous removal of indoor VOCs, dusts and microorganisms.

Air purification often requires multiple layers of filters with different functions to remove various air pollutants, which lead to high pressure drop, high air flow path and frequent filter replacement. In this work, a novel multifunctional Ag@MWCNTs/Al2O3 hybrid filter with a depth-type hierarchical structure for simultaneous removal of fine particles, microorganisms and VOCs was designed and fabricated. The novel hybrid air filter showed leading air purification performances to date, achieving 82.24% degradation of formaldehyde at room temperature, 99.99% formaldehyde degradation at 55 °C and complete retention of indoor airborne microorganisms. The complete particle retention rate (100% retention) based on the most penetrating particle size (MPPS, aerodynamic diameter ≦300 nm) of Ag@MWCNTs/Al2O3 was achieved at an only 35.60% pressure drop compared with the pristine Al2O3 filter, leading to the highest quality factor (Qf) ever reported. Furthermore, the Ag@MWCNTs/Al2O3 hybrid filter showed excellent water repellency (water contact angle of 139.6 ± 2.9°), prolonging the service life of the filters and improving the air purification efficiency. The novel Ag@MWCNTs/Al2O3 hybrid filter exhibits remarkable air purification performance in both laboratory synthetic conditions as well as in the "real world" and shows great promise as an effective single replacement for multiple layers of air purifying filters.

Molecularly Rigid Microporous Polyamine Captures and Stabilizes Conducting Platinum Nanoparticle Networks.

A molecularly rigid polyamine based on a polymer of intrinsic microporosity (PIM-EA-TB) is shown to capture and stabilize platinum nanoparticles during colloid synthesis in the rigid framework. Stabilization here refers to avoiding aggregation without loss of surface reactivity. In the resulting rigid framework with embedded platinum nanoparticles, the volume ratio of platinum to PIM-EA-TB in starting materials is varied systematically from approximately 1.0 to 0.1 with the resulting platinum nanoparticle diameter varying from approximately 4.2 to 3.1 nm, respectively. Elemental analysis suggests that only a fraction of the polymer is "captured" to give nanocomposites rich in platinum. A transition occurs from electrically conducting and electrochemically active (with shorter average interparticle distance) to nonconducting and only partially electrochemically active (with longer average interparticle distance) polymer-platinum composites. The conducting nanoparticle network in the porous rigid macromolecular framework could be beneficial in electrocatalysis and in sensing applications.

Hydrogel-polyurethane interpenetrating network material as an advanced draw agent for forward osmosis process.

Water desalination and purification are critical to address the global issue of the shortage of clean water. Forward osmosis (FO) desalination is an emerging low-cost technology for clean water production from saline water. The lack of a suitable draw agent is one of hurdle for the commercialization of FO desalination technology. Recently, the thermoresponsive hydrogel has been demonstrated to be a potential draw agent for the FO process. However, the commonly used hydrogel powder shows a much lower flux than other kind of draw agent such as inorganic salts. In this work, a hydrogel-polyurethane interpenetrating network (HPIPN) with monolith form was prepared by controlling the radical polymerization of the monomers (N-isopropylacrylamide and sodium acrylate) in the macropores (∼400 µm) of commercial polyurethane foam (PUF). These HPIPN composites show a flux as high as 17.9 LMH, which is nearly 8 times than that of hydrogel powders (2.2 LMH). The high flux is attributed to the 3-D continuous hydrogel-polyurethane interpenetrating network, which can effectively enhance the water transport inside the monolith.

Rapid Construction of ZnO@ZIF-8 Heterostructures with Size-Selective Photocatalysis Properties.

To selectively remove heavy metal from dye solution, inspired by the unique pore structure of ZIF-8, we developed a synthetic strategy for rapid construction of ZnO@ZIF-8 heterostructure photocatalyst for selective reduction of Cr(VI) between Cr(VI) and methylene blue (MB). In particular, ZnO@ZIF-8 core-shell heterostructures were prepared by in situ ZIF-8 crystal growth using ZnO colloidal spheres as template and zinc source within 8-60 min. The shell of the resulting ZnO@ZIF-8 core-shell heterostructure with a uniform thickness of around 30 nm is composed of ZIF-8 crystal polyhedrons. The concentration of organic ligand 2-methylimidazole (Hmim) was found to be crucial for the formation of ZnO@ZIF-8 core-shell heterostructures. Different structures, ZnO@ZIF-8 core-shell spheres and separate ZIF-8 polyhedrons could be formed by altering Hmim concentration, which significantly influences the balance between rate of Zn(2+) release from ZnO and coordinate rate. Importantly, such ZnO@ZIF-8 core-shell heterostructures exhibit size-selective photocatalysis properties due to selective adsorption and permeation effect of ZIF-8 shell. The as-synthesized ZnO@ZIF-8 heterostructures exhibited enhanced selective reduction of Cr(VI) between Cr(VI) and MB, which may find application in the dye industry. This work not only provides a general route for rapid fabrication of such core-shell heterostructures but also illustrates a strategy for selectively enhanced photocatalysis performance by utilizing adsorption and size selectivity of ZIF-8 shell.

Aqueous Phase Synthesis of ZIF-8 Membrane with Controllable Location on an Asymmetrically Porous Polymer Substrate.

In this study, we have demonstrated a simple, scalable, and environmentally friendly route for controllable fabrication of continuous, well-intergrown ZIF-8 on a flexible polymer substrate via contra-diffusion method in conjunction with chemical vapor modification of the polymer surface. The combined chemical vapor modification and contra-diffusion method resulted in controlled formation of a thin, defect-free, and robust ZIF-8 layer on one side of the support in aqueous solution at room temperature. The ZIF-8 membrane exhibited propylene permeance of 1.50 × 10(-8) mol m(-2) s(-1) Pa(-1) and excellent selective permeation properties; after post heat-treatment, the membrane showed ideal selectivities of C3H6/C3H8 and H2/C3H8 as high as 27.8 and 2259, respectively. The new synthesis approach holds promise for further development of the fabrication of high-quality polymer-supported ZIF membranes for practical separation applications.

Rapid synthesis of ultrathin, defect-free ZIF-8 membranes via chemical vapour modification of a polymeric support.

Ultrathin ZIF-8 membranes with a thickness of around 200 nm were prepared by chemical vapour modification of surface chemistry and nanopores of an asymmetric bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) substrate. The resulting ZIF-8 membranes exhibited exceptional H2 permeance as high as 2.05 × 10(-6) mol m(-2) s(-1) Pa(-1) with high H2/N2 and H2/CO2 selectivities (9.7 and 12.8, respectively).

Preparation and characterization of thin-film composite membrane with nanowire-modified support for forward osmosis process.

Internal concentration polarization (ICP) in forward osmosis (FO) process is a characteristic problem for asymmetric thin-film composite (TFC) FO membrane which leads to lower water flux. To mitigate the ICP effect, modification of the substrates' properties has been one of the most effective methods. A new polyethersulfone-based ultrafiltration membrane with increased surface porosity and high water flux was recently produced by incorporating Zn2GeO4 nanowires. The composite membrane was used as a substrate for the fabrication of TFC FO membrane, by coating a thin layer of polyamide on top of the substrate. The substrate and the nanowires were characterized by a range of techniques such as SEM, XRD, and contact angle goniometry. The water permeability and molecular weight cut-offs (MWCO) of the substrate; and the FO performance of the TFC membrane were also determined. The Zn2GeO4-modified membrane showed ~45% increase in water permeability and NaCl salt rejection of 80% under RO mode. In FO mode, the ratio of water flux to reverse solute flux was also improved. However, lower FO flux was obtained which could be due to ICP. The result shows that Zn2GO4 nanowire may be used as a modifier to the substrate to improve the quality of the polyamide layer on the substrate to improve the flux and selectivity, but not as effective in reducing ICP. This work demonstrates that the incorporation of nanomaterials to the membrane substrate may be an alternative approach to improve the formation of polyamide skin layer to achieve better FO performance.