Male facial rejuvenation using a combination 633, 830, and 1072 nm LED face mask.

Home-based photobiomodulation is a popular treatment modality for patients seeking non-invasive aesthetic treatment. Studies demonstrate that photobiomodulation is effective for skin rejuvenation, which is aimed at improving the overall appearance of the skin by reducing fine lines and wrinkles and improving skin texture, skin tone, and dyspigmentation. Most current skin rejuvenation research focuses on treatments in women. However, men's aesthetics remains an underserved market. A combined red light (RL) and near-infrared (NIR) light-emitting diode (LED) has been designed specifically to target male skin, which may have different physiological and biophysical properties compared to female skin. Herein, the safety and efficacy of a commercially available RL and NIR (633, 830, and 1072 nm) LED array designed to be worn as a face mask was assessed. Primary outcomes included adverse events and facial rejuvenation as determined by participant-reported satisfaction scales and quantitative digital skin photography and computer analysis after 6 weeks of treatment. The participants reported overall favorable results and improvements in all individual categories, were satisfied with the treatment, and would recommend the product to others. The participants perceived the greatest improvement in fine lines and wrinkles, skin texture, and youthful appearance. Photographic digital analysis demonstrated favorable improvements in wrinkles, UV spots, brown spots, pores, and porphyrins. These results support the use of RL and NIR to treat male skin. Advantages of the LED facemask include its safety, efficacy, convenient home-based use, minimal associated downtime, simple operation, non-invasiveness, and appreciable results in as few as 6 weeks.

Case Studies of Robots and Automation as Health/Safety Interventions in Small Manufacturing Enterprises.

This paper reviews the experiences of 63 case studies of small businesses (< 250 employees) with manufacturing automation equipment acquired through a health/safety intervention grant program. The review scope included equipment technologies classified as industrial robots (n = 17), computer numerical control (CNC) machining (n = 29), or other programmable automation systems (n = 17). Descriptions of workers' compensation (WC) claim injuries and identified risk factors that motivated acquisition of the equipment were extracted from grant applications. Other aspects of the employer experiences, including qualitative and quantitative assessment of effects on risk factors for musculoskeletal disorders (MSD), effects on productivity, and employee acceptance of the intervention were summarized from the case study reports. Case studies associated with a combination of large reduction in risk factors, lower cost per affected employee, and reported increases in productivity were: CNC stone cutting system, CNC/vertical machining system, automated system for bottling, CNC/routing system for plastics products manufacturing, and a CNC/Cutting system for vinyl/carpet. Six case studies of industrial robots reported quantitative reductions in MSD risk factors in these diverse manufacturing industries: Snack Foods; Photographic Film, Paper, Plate, and Chemical; Machine Shops; Leather Good and Allied Products; Plastic Products; and Iron and Steel Forging. This review of health/safety intervention case studies indicates that advanced (programmable) manufacturing automation, including industrial robots, reduced workplace musculoskeletal risk factors and improved process productivity in most cases.

Evaluation and Test Methods of Industrial Exoskeletons In Vitro, In Vivo, and In Silico: A Critical Review.

Industrial exoskeletons have been used to assist workers during occupational activities, such as overhead work, tool-use, mobility, stooping/squatting, and/or load carrying in various industries. Despite the promise of reducing the risk of work-related musculoskeletal disorders, there is a lack of sufficient evidence to support the safe and effective use of industrial exoskeletons. To assess the merits and residual risks of various types of exoskeletons in different work settings, more comprehensive evaluation procedures are needed. This review study aims to provide an overview of the existing viable and promising methods for evaluating the effectiveness of industrial exoskeletons. The different evaluation methods are organized into three categories-in vitro, in vivo, and in silico studies. The limitations and challenges in different types of evaluation approaches are also discussed. In summary, this review sheds light on choosing appropriate evaluation approaches and may help with decision-making during the development, evaluation, and application of industrial exoskeletons.

Trends in Work-Related Musculoskeletal Disorders From the 2002 to 2014 General Social Survey, Quality of Work Life Supplement.

OBJECTIVE: To update trends in prevalence of back and upper limb musculoskeletal symptoms and risk factors from the 2014 Quality of Work Life (QWL) Survey. METHODS: Quadrennial QWL Surveys, 2002 to 2014 (with N = 1455, 1537, 1019, and 1124 in 2002, 2006, 2010, and 2014 surveys respectively) were analyzed for reports of back pain and pain in arms. RESULTS: In the fourth analysis of this survey, 12-year trends continue to show a decline in back pain and pain in arms. Key physical (heavy lifting, hand movements, very hard physical effort) and psychosocial/work organizational factors (low supervisor support, work is always stressful, not enough time to get work done) remain associated with back and arm pain, with the physical risk factors showing the strongest associations. CONCLUSION: Physical exposure risk factors continue to be strongly associated with low back and arm pain and should be the focus of intervention strategies.

Industrial exoskeletons: Need for intervention effectiveness research.

Exoskeleton devices are being introduced across several industry sectors to augment, amplify, or reinforce the performance of a worker's existing body components-primarily the lower back and the upper extremity. Industrial exoskeletons may play a role in reducing work-related musculoskeletal disorders arising from lifting and handling heavy materials or from supporting heavy tools in overhead work. However, wearing an exoskeleton may pose a number of risks that are currently not well-studied. There are only a few studies about the safety and health implications of wearable exoskeletons and most of those studies involve only a small number of participants. Before the widespread implementation of industrial exoskeletons occurs, there is need for prospective interventional studies to evaluate the safety and health effectiveness of exoskeletons across various industry sectors. Developing a research strategy to fill current safety and health knowledge gaps, understanding the benefits, risks, and barriers to adoption of industrial exoskeletons, determining whether exoskeleton can be considered a type of personal protective equipment, and advancing consensus standards that address exoskeleton safety, should be major interests of both the occupational safety and health research and practice communities.

Ergonomics assessment methods used by ergonomics professionals.

A web-based survey was conducted of ergonomics practitioners holding certifications in the U.S., Canada, Great Britain, Australia, and New Zealand. The survey follows 12 years after an earlier initial survey reported by Dempsey et al. (2005). Approximately 1221 eligible participants were invited by e-mail to participate, and 405 surveys were included in the final analysis. The survey queried use of basic instruments relevant to ergonomic practice as well as more specific analytical tools such as observational techniques for assessing postural demands of work and instrumentation for direct measurement of such demands. Some ergonomic assessment methods appear to have increased in their overall use by U.S. ergonomists compared to 2005 data. This was observed for: RULA, REBA, Psychophysical Upper Extremity Data, Strain Index, and ACGIH TLV for Hand Activity Level. There is minimal evidence of increased overall use of direct measurement approaches in the U.S. There appear to be geographic differences between countries/continents in terms of use of various methods. The use of mobile device/smart phone "apps" by ergonomists was queried and these technologies presently appear to be in early adoption phase with 24-28% of practitioners reporting use of an app in their ergonomics practice.

ASTM F48 Formation and Standards for Industrial Exoskeletons and Exosuits.

This paper provides an overview of a new consensus standards committee for exoskeletons, ASTM International F48, and describes the organization and current activities of this committee. Lack of product standards and certifications have been described as barriers to adoption of exoskeleton technologies in industry practice. While exoskeletons are not considered a traditional form of personal protective equipment (PPE) they are similarly wearable, and much of the interest in their application in the industrial/workplace domain is motivated by injury prevention. ASTM F48 believes that standards and certifications for exoskeletons in their manufacture, deployment, and use would enhance their adoption in the workplace.

Evaluation of a Workplace Exercise Program for Control of Shoulder Disorders in Overhead Assembly Work.

OBJECTIVE: The aim of this study was to assess effects of exercise on shoulder musculoskeletal symptoms among employees with overhead assembly work exposures. METHODS: A voluntary workplace shoulder exercise program was offered to employees in two automotive assembly departments, while two similar departments served as controls. N = 76 total workers participated. Shoulder Rating Questionnaire (SRQ) and Discomfort of the Arm Shoulder and Hand (DASH) symptoms were queried monthly for 7 baseline months, followed by 6 months that included exercise. RESULTS: SRQ scores were higher for exercisers than among controls in the 6 exercising months, but not in the baseline months. Although the group x month interaction was significant (P < 0.05), the temporal trend was inconsistent. CONCLUSIONS: Exercise may have temporarily lessened decline in SRQ. It is not clear whether shorter term differences were clinically meaningful or predictive of longer term disability prevention.

Serious injury and fatality investigations involving pneumatic nail guns, 1985-2012.

BACKGROUND: This article examines serious and fatal pneumatic nail gun (PNG) injury investigations for workplace, tool design, and human factors relevant to causation and resulting OS&H authorities' responses in terms of citations and penalties. METHODS: The U.S. Occupational Safety and Health Administration (OSHA) database of Fatality and Catastrophe Investigation Summaries (F&CIS) were reviewed (1985-2012) to identify n = 258 PNG accidents. RESULTS: 79.8% of investigations, and 100% of fatalities, occurred in the construction industry. Between 53-71% of injuries appear to have been preventable had a safer sequential trigger tool been used. Citations and monetary penalties were related to injury severity, body part injured, disabling of safety devices, and insufficient personal protective equipment (PPE). CONCLUSIONS: Differences may exist between construction and other industries in investigators interpretations of PNG injury causation and resulting citations/penalties. Violations of PPE standards were penalized most severely, yet the preventive effect of PPE would likely have been less than that of a safer sequential trigger.

Revisiting Pneumatic Nail Gun Trigger Recommendations.

Use of a pneumatic nail gun with a sequential actuation trigger (SAT) significantly diminishes the risk for acute traumatic injury compared to use of a contact actuation trigger (CAT) nail gun. A theoretically-based increased risk of work-related musculoskeletal disorders from use of a SAT nail gun, relative to CAT, appears unlikely and remains unproven. Based on current knowledge, the use of CAT nail guns cannot be justified as a safe alternative to SAT nail guns. This letter provides a perspective of ergonomists and occupational safety researchers recommending the use of the sequential actuation trigger for all nail gun tasks in the construction industry.

Further Trends in Work-Related Musculoskeletal Disorders: A Comparison of Risk Factors for Symptoms Using Quality of Work Life Data From the 2002, 2006, and 2010 General Social Survey.

OBJECTIVE: To report trends for the risk of musculoskeletal disorders. METHODS: Three Quality of Work Life surveys examine the risk factors for musculoskeletal disorders. RESULTS: Findings similar for several risk factors, but differences across the reporting years may reflect economic conditions. Respondent numbers in 2010 were reduced, some risk factors had pattern changes, and there were sex and age differences. Trend analysis showed most significant changes were for the "work fast" risk factor. New 2010 "physical effort" item showed sex differences, and items reflective of total worker health showed strong associations with "back pain" and "pain in arms." CONCLUSIONS: Intervention strategies should focus on physical exposures and psychosocial risk factors (work stress, safety climate, job satisfaction, supervisor support, work fast, work freedom, work time) that have been consistently related to reports of musculoskeletal disorders. Economic conditions will influence some psychosocial risk factors.

Unstable sitting in the workplace--are there physical activity benefits?

The increasingly popular practice of using a stability ball (exercise/fitness ball) as a sitting surface runs counter to conventional human factors/ergonomics guidelines for seated workspace design. Employees sitting on stability balls in an office environment present safety risks that might be justifiable if the practice has a definitive benefit to the promotion of health. However, the published studies and best evidence to date call into question even the theoretical basis for this practice and do not suggest significant health benefits. First, biomechanical studies do not confirm the intended trunk muscle activation. Second, energy expenditure studies show a small (if any) increase in metabolic demand that is unlikely to be effective in combating sedentary work risk factors. Until studies demonstrate more conclusive benefits, the practice of stability ball sitting should be viewed skeptically as a general workplace recommendation in the interest of health or wellness.

Muscular activity of lower limb muscles associated with working on inclined surfaces.

This study investigated the effects of visual cues, muscular fatigue, task performance and experience of working on inclined surfaces on activity of postural muscles in the lower limbs associated with maintaining balance on three inclined surfaces - 0°, 14° and 26°. Normalised electromyographic (NEMG) data were collected in 44 professional roofers bilaterally from the rectus femoris, biceps femoris, tibialii anterior and gastrocnemii medial muscle groups. The 50th and 95th percentile NEMG amplitudes were used as EMG variables. Results showed that inclination angle and task performance caused a significant increase in the NEMG amplitudes of all postural muscles. Visual cues were significantly associated with a decrease in the 95th percentile EMG amplitude for the right gastrocnemius medial and tibialis anterior. Fatigue was related to a significant decrease in the NEMG amplitude for the rectus femoris. Experience of working on inclined surfaces did not have a significant effect on the NEMG amplitude.

A Biomechanical Assessment of Hand/Arm Force with Pneumatic Nail Gun Actuation Systems.

A biomechanical model is presented, and combined with measurements of tip press force, to estimate total user hand force associated with two pneumatic nail gun trigger systems. The contact actuation trigger (CAT) can fire a nail when the user holds the trigger depressed first and then "bumps" the nail gun tip against the workpiece. With a full sequential actuation trigger (SAT) the user must press the tip against the workpiece prior to activating the trigger. The SAT is demonstrably safer in reducing traumatic injury risk, but increases the duration (and magnitude) of tip force exertion. Time integrated (cumulative) hand force was calculated for a single user from measurements of the tip contact force with the workpiece and transfer time between nails as inputs to a static model of the nail gun and workpiece in two nailing task orientations. The model shows the hand force dependence upon the orientation of the workpiece in addition to the trigger system. Based on standard time allowances from work measurement systems (i.e. Methods-Time Measurement - 1) it is proposed that efficient application of hand force with the SAT in maintaining tip contact can reduce force exertion attributable to the sequential actuation trigger to 2-8% (horizontal nailing) and 9-20% (vertical nailing) of the total hand/arm force. The present model is useful for considering differences in cumulative hand/arm force exposure between the SAT and CAT systems and may explain the appeal of the CAT trigger in reducing the user's perception of muscular effort.

Workplace exercise for control of occupational neck/shoulder disorders: a review of prospective studies.

A review was conducted of prospective studies (1997-2014) examining the efficacy of exercise as a workplace intervention to control neck/shoulder pain, symptoms, and disability. The review identified 38 relevant studies - 20 were classified with positive effects, 13 with null effects, and 5 as inconclusive. Of the positive studies, 12 were consistent with Level I evidence, 3 with Level II evidence, and 5 with Level IV evidence. Specific resistance training (SRT) exercise appeared to be associated with more positive studies (eight Level I studies) than other exercise modalities such as general resistance training, general physical exercise, stretching, and movement awareness exercises. Studies of longer trial duration tended toward more null findings and lower program compliance. Evidence for a primary preventive effect of workplace exercise is minimal. The findings of this review suggest that workplace exercise can be effective as tertiary prevention and therapeutic relief of neck/shoulder symptoms, at least over the shorter term.

Finger Tendon Travel Associated with Sequential Trigger Nail Gun Use.

BACKGROUND: Pneumatic nail guns used in wood framing are equipped with one of two triggering mechanisms. Sequential actuation triggers have been shown to be a safer alternative to contact actuation triggers because they reduce traumatic injury risk. However, the sequential actuation trigger must be depressed for each individual nail fired as opposed to the contact actuation trigger, which allows the trigger to be held depressed as nails are fired repeatedly by bumping the safety tip against the workpiece. As such, concerns have been raised about risks for cumulative trauma injury, and reduced productivity, due to repetitive finger motion with the sequential actuation trigger. PURPOSE: This study developed a method to predict cumulative finger flexor tendon travel associated with the sequential actuation trigger nail gun from finger joint kinematics measured in the trigger actuation and productivity standards for wood-frame construction tasks. METHODS: Finger motions were measured from six users wearing an instrumented electrogoniometer glove in a simulation of two common framing tasks-wall building and flat nailing of material. Flexor tendon travel was calculated from the ensemble average kinematics for an individual nail fired. RESULTS: Finger flexor tendon travel was attributable mostly to proximal interphalangeal and distal interphalangeal joint motion. Tendon travel per nail fired appeared to be slightly greater for a wall-building task than a flat nailing task. The present study data, in combination with construction industry productivity standards, suggest that a high-production workday would be associated with less than 60 m/day cumulative tendon travel per worker (based on 1700 trigger presses/day). CONCLUSION AND APPLICATIONS: These results suggest that exposure to finger tendon travel from sequential actuation trigger nail gun use may be below levels that have been previously associated with high musculoskeletal disorder risk.

Residential building stakeholders' attitudes and beliefs regarding nail gun injury risks and prevention.

Pneumatic nail guns are ubiquitous at residential construction sites across the United States. These tools are noted for the traumatic injuries that can occur from their operation. Different trigger mechanisms on these tools are associated with different levels of risk. Residential building subcontractors and workers, both native-born and immigrant, were brought together in focus groups to discuss their attitudes and beliefs regarding risk factors for nail gun injury as well as barriers to the adoption of safer technology. Participants' comments are organized first by influences on traumatic injury occurrence or prevention and later by sociotechnical system category. Participants attributed influences on injury risk to personal and external causation factors in all sociotechnical system categories; however, participants more frequently described influences on injury prevention as related to workers' behaviors, rather than to external factors. A discussion of these influences with respect to attribution theory and sociotechnical models of injury causation is presented.

Detection of human papillomavirus in anal specimens using the hybrid capture 2 assay.

The hc2 human papillomavirus DNA test (HC2) is effective when screening women for cervical dysplasia, and it might be effective in the screening for anal dysplasia. Differences between the anal and the cervical canals could affect the test performance. This prospective study (n=292) measured the HC2 signal and in agreement with a histologic endpoint of high-grade dysplasia for anal specimens collected in various ways. Sensitivities were 91%, 85%, and 62% for specimens collected in a sample transport medium and a liquid-based cytology medium processed by Gyn or Non-Gyn protocol, respectively. HC2 sensitivity and specificity to predict high-grade anal dysplasia were similar for brush or swab specimen collections, but HC2 signal was 6 times higher with the brush. Specificity and sensitivity were similar whether the sample was collected first or after a cytology sample for brush or swab, but swab specimens at the second collection had an HC2 signal (mean) 48% lower than that of the first collection, and the swab cellularity was lower. The presence of maximum stool decreased the HC2 signal in anal swab specimens. Consensus polymerase chain reaction (PCR) confirmed that the 13 human papillomavirus probe types in HC2 were optimal for performance. HC2 could potentially be further investigated for use in screening anal dysplasia. A larger prospective study is indicated.

The bar sinister: does handlebar level damage the pelvic floor in female cyclists?

INTRODUCTION: Cycling is associated with genital neuropathies and erectile dysfunction in males. Women riders also have decreased genital sensation; however, sparse information exists addressing the effects of modifiable risks on neurological injuries in females. AIM: This study assesses the effects of bicycle setup and cyclists' attributes on GS and saddle pressures among female cyclists. METHODS: Previously, we compared genital sensation in competitive female cyclists (N = 48) to that of female runners (N = 22). The current study is a subanalysis of the 48 cyclists from the original study group. Nonpregnant, premenopausal women who rode at least 10 miles per week, 4 weeks per month were eligible for participation. MAIN OUTCOME MEASURES: Genital sensation was measured in microns using biosthesiometry measures of vibratory thresholds (VTs). Perineal and total saddle pressures were determined using a specialized pressure map and recorded in kilopascals (kPA). RESULTS: Handlebars positioned lower than the saddle correlated with increased perineum saddle pressures and decreased anterior vaginal and left labial genital sensation (P < 0.05, P < 0.02, P < 0.03, respectively). Low handlebars were not associated with total saddle pressures or altered genital sensation in other areas. After adjusting for age and saddle type, low handlebars were associated with a 3.47-kPA increase in mean perineum saddle pressures (P < 0.04) and a 0.86-micron increase in anterior vagina VT (P < 0.01). CONCLUSION: Handlebars positioned lower than the saddle were significantly associated with increased perineum saddle pressures and decreased genital sensation in female cyclists. Modifying bicycle setup may help alleviate neuropathies in females. Additional research is warranted to further assess the extent of the associations.