Efficient nitrogen removal from municipal wastewater using an integrated fixed-film activated sludge process in a novel air-lifting loop reactor: A pilot-scale demonstration.

A novel air-lifting loop reactor combines anoxic, oxic, and settling zones to achieve organic and nutrient removal, as well as solid-liquid separation. To address sludge settling ability and operation stability issues caused by low dissolved oxygen in aerobic zones, this study proposes using modified polypropylene carriers to establish a fixed-film activated sludge (IFAS) system. A pilot-scale demonstration of the IFAS-based air-lifting loop reactor is conducted, and the results show successful operation for approximately 300 days. The pilot-scale reactor achieves a maximum aerobic granulation ratio of 16% in the bulk liquid. The IFAS system contributes to efficient removal of organic matter (96%) and nitrogen (94%) by facilitating simultaneous nitrification and denitrification, as well as fast solid-liquid separation with a low sludge volume index of 34 mL/g. Microbial analysis reveals enrichment of functional bacteria involved in nitrification, denitrification, and flocculation throughout the operation process.

Non-uniform dissolved oxygen distribution and high sludge concentration enhance simultaneous nitrification and denitrification in a novel air-lifting reactor for municipal wastewater treatment: A pilot-scale study.

Achieving simultaneous carbon and nitrogen removal with sludge-liquid separation in a single reactor offers a solution to land shortages and improves treatment efficiency in municipal wastewater treatment plants of megacities. This study proposes a novel air-lifting continuous-flow reactor configuration with an alternative-aeration strategy that creates multi-functional zones for anoxic, oxic, and settlement processes. The optimal operating conditions for the reactor include a long anoxic hydraulic retention time, low dissolved oxygen (DO) in the oxic zone, and no specific reflux for external nitrifying liquid, which exhibit a high nitrogen removal efficiency of over 90% in treating real sewage with C/N < 4 in the pilot-scale study. Results show that a high sludge concentration and a low DO concentration facilitate simultaneous nitrification and denitrification, and a well mixing of sludge and substrate in different reaction zones promotes mass transfer and microbial activity. The long-term operation enriches functional microbes for carbon storage and nutrient removal.

Removal of bisphenol A by waste zero-valent iron regulating microbial community in sequencing batch biofilm reactor.

The removal of bisphenol A (BPA) by waste zero-valent iron (ZVI) regulating microbial community in sequencing batch biofilm reactor (SBBR) was investigated. Compared with SBBR-BPA, the acclimation time of microorganisms in the presence of waste ZVI and BPA (SBBR-ZVI+BPA) decreased from 56 d to 49 d. During stable operation period, BPA was removed completely at 150th min and 100th min in the SBBR-BPA and SBBR-ZVI+BPA, respectively. The optimal initial pH and BPA concentration in the SBBRs were respectively 8.0 and 10 mg/L. The composition and content analysis of extracellular polymeric substances (EPS) using fluorescence spectrometer showed that the yield of EPS was enhanced by the addition of ZVI. The analysis of microbial community structure in the SBBRs using Illumina Miseq sequencing method indicated that the indexes of ACE, Chao1 and Shannon were higher and Simpson index was lower in the SBBR-ZVI+BPA. Moreover, the abundance of BPA biodegradation strains was increased in the presence of ZVI. This study provided a promising method with low cost of effectively removing BPA from wastewater.

Identification and nitrogen removal characteristics of Thauera sp. FDN-01 and application in sequencing batch biofilm reactor.

A strain FDN-01 was isolated from the sequencing batch biofilm reactor (SBBR) which was seeded with wasted activated sludge from a municipal wastewater treatment plant in Shanghai. Bacterium FDN-01 was identified as Thauera sp., and Genbank Sequence_ID was KY393097. By comparing inorganic total nitrogen (TN) removal efficiency by strain FDN-01 under different conditions, the optimal initial pH, carbon source and the ratio of carbon to nitrogen were 7.5, sodium succinate and 4.0, respectively. Inorganic TN removal efficiency was 93% within 3 d while the concentration of nitrate was 100 mg/L, and the type of substrates affected extracellular polymeric substances (EPS) production and the ratio of protein to polysaccharide in the EPS. Further investigation for the application of strain FDN-01 in the SBBRs showed that anoxic ammonia oxidation occurred at room temperature, and the removal efficiencies of inorganic TN were noticeably enhanced by the augmentation of bacterium FDN-01 back into the SBBR. This study provided a promising method of TN removal requiring less carbon source in the wastewater.

Accumulation and health risk assessment of trace elements in Carassius auratus gibelio from subsidence pools in the Huainan coalfield in China.

Microelement (As, Cd, Cr, Cu, Ni, Pb, and Zn) concentrations were determined in the muscle, skin, gill, and liver tissues of Carassius auratus gibelio collected from subsidence pools at three different coal mines in the Huainan coalfield in China. The concentrations of elements in the water were within the allowable levels for raising fish. However, the higher levels of these metals in sediment may pose potential harm on fish. It was found that the concentrations of Cr, Ni, and Zn in all fish tissues were higher, while As, Cd, and Pb levels were relatively low. Microelement accumulation appeared to be more widespread in subsidence pools than that in natural water. Elements accumulated in fish tissues differently: the highest metal concentrations were generally found in the liver tissues of the fish analyzed, whereas the lowest were recorded in the muscles. The mean element concentrations in muscle tissue from C. auratus gibelio collected from subsidence pools (As, 0.16 mg/kg; Cd, 0.06 mg/kg; Cr, 6.21 mg/kg; Cu, 1.61 mg/kg; Ni, 3.88 mg/kg; Pb, 1.76 mg/kg; and Zn, 12.80 mg/kg dry weight) were far below the allowable limit of the hygienic standard in fish proposed by the Ministry of Health in China, suggesting that the fish were safe for human consumption. A health risk assessment also suggested there was no risk from the analyzed elements for inhabitants near the Huainan coalfield that consume fish.

Four Specific Hapten Conformations Dominating Antibody Specificity: Quantitative Structure-Activity Relationship Analysis for Quinolone Immunoassay.

Antibody-based immunoassay methods have been important tools for monitoring drug residues in animal foods. However, because of limited knowledge about the quantitative structure-activity relationships between a hapten and its resultant antibody specificity, antibody production with the desired specificity is still a huge challenge. In this study, the three-dimensional quantitative structure-activity relationship (3D QSAR) was analyzed in accordance with the cross-reactivity of quinolone drugs reacting with the antibody raised by pipemidic acid as the immunizing hapten and compared with the reported cross-reactivity data and their hapten structures. It was found that the specificity of a quinolone antibody was strongly related to the conformation of the hapten used and that hapten conformations shaped like the letters "I", "P", and "Φ" were essential for the desired high specificity with low cross-reactivity, but that the hapten conformation shaped like the letter "Y" led to an antibody with broad specificity and high cross-reactivity. Almost all of the antibodies against quinolones could result from these four hapten conformations. It was first found that the concrete conformations dominated the specificity of the antibody to quinolone, which will be of significance for the accurate hapten design, predictable antibody specificity, and better understanding the recognition mechanism between haptens and the antibodies for immunoassays.

Metal distribution and bioavailability in surface sediments from the Huaihe River, Anhui, China.

This study presents the total concentrations and chemical fractionations of metals (Cu, Pb, Zn, Ni, Fe, and Mn) in 54 surface sediment samples collected from the Huaihe River (Anhui Province) in eastern China. Compared with the average shale values, Zn and Pb exhibited the most substantial anthropogenic enrichment, especially in Fengtai and Huainan areas, the main industrial districts along the Huaihe River (Anhui Province). Low levels of Cu and Ni were observed in the sediments. Based on risk assessment code (RAC), the metals associated with weak acid soluble (F1) in the Huaihe River sediments followed the order: Mn > Zn > Cu > Pb > Ni > Fe. Manganese presented the most potential for releasing into the aqueous environment and can easily enter the food chain. Copper, zinc, nickel, and iron were found dominant in the residual fraction, implying that these four metals were strongly bound to the sediments. Lead showed a different partitioning pattern from that of other metals studied, with a large percentage in Fe-Mn oxide fraction, indicating that slight redox potential changes may make significant influence on the removability of Pb. Moreover, Cu in oxidizable (F3) and residual (F4) fractions presented high positive correlation with organic matter, which can explain the high percentage of Cu in these two fractions.

Lead in soil and agricultural products in the Huainan Coal Mining Area, Anhui, China: levels, distribution, and health implications.

Heavy metal accumulation in agricultural soil is of great concern, as heavy metals can be finally transferred to the human body through the food chain. A field survey was conducted to investigate the lead (Pb) levels and distribution in soil, agricultural products (wheat, paddy, and soybean), and fish, in the Huainan Coal Mining Area (HCMA), Anhui Province, China, to provide reference information to local inhabitants. The daily intake and target hazard quotients of Pb through food consumption were assessed. Results showed that the mean Pb concentration in soil was higher than the Huainan soil background Pb value but lower than the maximum allowance Pb concentration for agricultural soil (GB 15618-2008). The elevated Pb in soil, especially in rainy months (June to August in Huainan), might be related to Pb leaching from ambient coal gangue piles. Excessive Pb concentration was found in the grains of food crops, which would pose a potential health risk to local inhabitants. Therein, wheat showed higher Pb bioaccumulation ability than other crops. With regard to the Pb levels in muscles, fishes were considered to be safe for consumption. The calculations on daily intake and tolerable hazard quotient of Pb suggest that the potential health hazard posed by Pb is currently insignificant for the inhabitants in the HCMA.

New indole-based metal-free organic dyes for dye-sensitized solar cells.

Two indole-based organic dyes were conveniently prepared and well characterized. The triphenylamine or carbazole moieties were bonded to the indole group acting as a potential electron donor, which can tune the HOMO and LUMO levels of the resultant dye, and another triphenylamine or carbazole group was linked to the pyrrole ring on the nitrogen atom, which was expected to suppress the aggregation of the dye in the solid state to some degree. These two dyes were utilized as dye sensitizers in dye-sensitized solar cells and demonstrated efficient photon-to-electron conversion properties.

Luminescence functionalization of mesoporous silica with different morphologies and applications as drug delivery systems.

Ordered mesoporous silica (MCM-41) particles with different morphologies were synthesized through a simple hydrothermal process. Then these silica particles were functionalized with luminescent YVO4:Eu3+ layers via the Pechini sol-gel process. The obtained YVO4:Eu3+ and MCM-41 composites, which maintained the mesoporous structure of MCM-41 and the red luminescence property of YVO4:Eu3+, were investigated as drug delivery systems using ibuprofen (IBU) as model drug. The physicochemical properties of the samples were characterized by X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 adsorption, and photoluminescence (PL) spectra, respectively. It is found that the specific surface area and pore volume, which are directly correlated with the drug-loading amount and drug release rate, decrease in sequence after the deposition of YVO4:Eu3+ layer and the further incorporation of IBU. Additionally, the drug release test indicated that the IBU release rate could be controlled by regulating the morphology of the materials. It is worth noting that the IBU-incorporated samples still exhibit red luminescence under UV irradiation. Furthermore, the emission intensities of Eu3+ can be tailored as a function of the released amount of IBU, thus making the drug release be easily tracked and monitored.