An Intrinsically Transparent Polyamide Film with Superior Toughness and Great Optical Performance.

Polyamide 66 was extensively utilized in various applications contributed by its excellent mechanical performance and outstanding durability. However, its high crystallinity renders it to have low transparency, which seriously limits its application in optical devices. Herein, a highly transparent polyamide (PA) 66-based copolymer was reported using 4,4'-diaminodicyclohexylmethane (PACM), adipic acid, and polyamide 66 salt as the reaction monomers. Wide-angle X-ray diffraction (WAXD) analysis revealed that the crystal phase of the synthesized PA66/PACM6 displayed a clear transition from α to γ as the PACM6 increased accompanied by a decreased intensity in the diffraction peak of the copolymer, whose transmittance was successfully adjusted reaching as high as 92.5% (at 550 nm) when the PACM6 was 40 wt%. Moreover, the copolymer with a higher content of PACM6 exhibited larger toughness. On the other hand, the biaxially oriented films of PA66/PACM6 (20 wt%) were also prepared, and it was found that the transparency of the PA66/PACM6 copolymer could be further enhanced via adjusting the stretching ratio of the film. Furthermore, the mechanical strength of the biaxially oriented PA66/PACM6 was also improved with the increase in the orientation degree in the stretching process, indicating that the physical properties of the transparent PA66 were significantly influenced by its alicyclic structure, and the introduction of PACM into PA66 was capable of effectively improving the optical and crystalline characteristics of PA66, revealing that the synthetic strategy has great potential for guiding the design and development of transparent polyamide materials.

Inspired in Adversity: How Inspiration Mediates the Effects of Emotions on Coping Strategies.

Purpose: Inspiration is a psychological construct that has been relatively understudied in times of difficulty. This study aims to investigate the mediating effect of inspiration on the relationship between emotions and coping strategies in the context of adversity and to testify the effect in Chinese as well as the International societies. Participants and Methods: Using the snowball sampling method, two survey studies were conducted among 523 Chinese and 503 international participants during and soon after the local Covid-19 outbreak to testify how positive and negative emotions contributed to various coping strategies and whether the experience of inspiration mediated these relations. Structural equation modeling (SEM) was used to analyze the data. Results: Positive emotions had a higher impact on problem-solving and seeking social support coping strategies, whereas negative emotions had a higher impact on avoidance coping strategy. Both positive and negative emotions had positive relationships with inspiration, but positive emotions had a higher impact than negative ones. The indirect effects of emotions on problem-solving and social support coping strategies through inspiration were significantly positive, while the avoidance coping strategy was not influenced by the experience of inspiration. Conclusion: The results suggest that being inspired in both positive and negative emotions is positively related to approach coping strategies in adverse situations such as COVID-19, with the effect patterns slightly differing between Chinese participants and their Western counterparts. This study highlights the importance of inspiration experience as a motivational state that can help individuals bring newly acquired ideas into fruition, especially during times of difficulty. By understanding the role of inspiration in the context of adversity, public health systems can better assist individuals in different societies to cope with the challenges they face.

A Transparent, Healable and Recyclable Alicyclic Poly(ether-b-amide) Multiblock Copolymer with Ultrahigh Toughness.

Self-healing polyamide multiblock copolymer with robust mechanical properties is highly desired. Here, an alicyclic diamine monomer, isophoronediamine (IPDA), with asymmetric structure and substantial steric hindrance was incorporated into the backbone of poly(ether-b-amide) multiblock copolymer. Based on the phase-lock effect, the mechanical properties and segmental mobility of copolymers can be modulated on a large scale via adjusting the molecular weight of hard segments. An extraordinary tensile strength of 32.0 MPa and an excellent elongation at break of 1881 % were simultaneously achieved, which leaded to a record-high toughness of 328.9 MJ m-3 for self-healable polyamide elastomers. The synergism between the dynamic H-bonding networks and the diffusion of polymer chains contributed to a balance between the mechanical performance and self-healing efficiency of copolymers. Due to the adjustable mechanical performance, rapid scratch self-healing ability and superior impact resistance, the resultant copolymers showed great potential in the fields of protective coatings and soft electronics.

Super diffraction limit spectral imaging detection and material type identification of distant space objects.

The image information of distant objects shows a diffuse speckle pattern due to diffraction limit, non-uniform scattering, etc., which is difficult to achieve object discrimination. In this study, we have developed a staring spectral video imaging system mounted on a ground-based telescope observation platform to detect the high orbit space objects and gain their spectral images for six groups of GEO targets. The speckle remains basically the same characteristic as the projection structure of the object due to "the balloon inflation phenomenon of near parallel light during long-distance atmospheric transmission" under the premise of considering the bi-directional reflection distribution function (BRDF), Rayleigh scattering theory, and the memory effect. Based on this phenomenon, a mathematical model of remote target scattering spectrum imaging is established where the speckle can be treated as both a global speckle and speckle combination of texture blocks caused by various components of the target. The radial basis function (RBF) neural network is separately used to invert the global speckle and the speckle combination of the texture blocks on account of the typical target material database. The results show that the target materials are of relatively fewer kinds in the global inversion with only including gallium arsenide panel (GaAs) and carbon fiber (CF), for which the highest goodness of curve fitting is only 77.97. An improved algorithm makes their goodness of fit reach 90.29 and 93.33, respectively, in view of one conjecture that the target surface contains unknown materials. The spectral inversion result of the texture blocks shows that the types of materials in each target texture block increase significantly, and that the area ratio of different materials inverted in the block is different from each other. It is further confirmed that the speckle image contains the overall projection structure of distant target and the spectral image projection of each component is relatively fixed, which is the result of the comprehensive action of various mechanisms of ultra-long-haul atmospheric transmission and optical system focusing imaging after BRDF spectral scattering. The spectral image fine inversion is expected to restore the clear structure of the target. This discovery provides important support for the remote imaging and identification of distant and ultra-diffractive targets.

Structure evolution of nanodiamond aggregates: a SANS and USANS study.

Ultra-small-angle neutron scattering (USANS) and small-angle neutron scattering (SANS) measurements, covering length scales from micrometres to nanometres, were made to investigate the structure of nanodiamonds (NDs) and their suspensions. These nanodiamonds were produced by two different techniques, namely by the detonation method and by the laser ablation of a carbon-hydro-carbon mixture. The (U)SANS results indicated the presence of structures four orders of magnitude larger than the dimensions of a single ND particle, consisting of aggregations of ND particles. This aggregation of the ND particles was studied by employing the contrast variation technique. Two different solvents, namely H2O and dimethyl sulfoxide (and their deuterated counterparts), were used to understand the role of hydrogen in the shape and size of the aggregates. The analysis of experimental data from SANS measurements also reveals the ND particles to have an ellipsoidal structure. Using a defined shape model and the SANS contrast variation technique, it was possible to characterize the non-diamond outer shell of the particles and determine the outer layer thickness. This clarification of the structure of the NDs will allow better preparation of suspensions/samples for various applications. Understanding the structure of NDs at multiple length scales also provides crucial knowledge of particle-particle interaction and its effect on the aggregation structures.

Highly efficient and inducible DNA excision in transgenic silkworms using the FLP/FRT site-specific recombination system.

Efficient and inducible recombinase-mediated DNA excision is an optimal technology for automatically deleting unwanted DNA sequences, including selection marker genes. However, this methodology has yet to be established in transgenic silkworms. To achieve efficient and inducible FLP recombinase-mediated DNA excision in transgenic silkworms, one transgenic target strain (TTS) containing an FRT-flanked silkworm cytoplasmic actin 3 gene promoter (A3)-enhanced green fluorescent protein (EGFP) expression cassette, as well as two different types of FLP recombinase expression helper strains were generated. Then, the FLP recombinase was introduced into the TTS silkworms by pre-blastoderm microinjection and sexual hybridization. Successful recombinase-mediated deletion of the A3-EGFP expression cassette was observed in the offspring of the TTS, and the excision efficiencies of the FLP expression vector and FLP mRNA pre-blastoderm microinjection were 2.38 and 13.3 %, respectively. The excision efficiencies resulting from hybridization between the TTS and the helper strain that contained a heat shock protein 70 (Hsp70)-FLP expression cassette ranged from 32.14 to 36.67 % after heat shock treatment, while the excision efficiencies resulting from hybridization between the TTS and the helper strain containing the A3-FLP expression cassette ranged from 97.01 to 100 %. These results demonstrate that the FLP/FRT system can be used to achieve highly efficient and inducible post-integration excision of unwanted DNA sequences in transgenic silkworms in vivo. Our present study will facilitate the development and application of the FLP/FRT system for the functional analysis of unknown genes, and establish the safety of transgenic technologies in the silkworm and other lepidopteran species.

An efficient strategy for producing a stable, replaceable, highly efficient transgene expression system in silkworm, Bombyx mori.

We developed an efficient strategy that combines a method for the post-integration elimination of all transposon sequences, a site-specific recombination system, and an optimized fibroin H-chain expression system to produce a stable, replaceable, highly efficient transgene expression system in the silkworm (Bombyx mori) that overcomes the disadvantages of random insertion and post-integration instability of transposons. Here, we generated four different transgenic silkworm strains, and of one the transgenic strains, designated TS1-RgG2, with up to 16% (w/w) of the target protein in the cocoons, was selected. The subsequent elimination of all the transposon sequences from TS1-RgG2 was completed by the heat-shock-induced expression of the transposase in vivo. The resulting transgenic silkworm strain was designated TS3-g2 and contained only the attP-flanked optimized fibroin H-chain expression cassette in its genome. A phiC31/att-system-based recombinase-mediated cassette exchange (RMCE) method could be used to integrate other genes of interest into the same genome locus between the attP sites in TS3-g2. Controlling for position effects with phiC31-mediated RMCE will also allow the optimization of exogenous protein expression and fine gene function analyses in the silkworm. The strategy developed here is also applicable to other lepidopteran insects, to improve the ecological safety of transgenic strains in biocontrol programs.

New insight into the mechanism underlying fibroin secretion in silkworm, Bombyx mori.

In order to investigate the role of different parts of the fibroin heavy chain (H-chain) in the secretion of fibroin in the silk gland of the silkworm (Bombyx mori) in vivo, two enhanced green fluorescent protein (EGFP)/H-chain fusion genes with deduced protein sequences containing an identical N-terminal region and different C-terminal regions of the H-chain were introduced into the B. mori genome using a piggyBac-mediated germline transformation. EGFP fluorescence and molecular analysis showed the products of two different EGFP/H-chain fusion proteins were secreted into the posterior silk gland lumen and aggregated in the middle silk gland and spun into cocoons. The results revealed that only the non-repetitive N terminus of the H-chain is essential for secretion of the H-chain into the posterior silk gland lumen. In addition, our results also indicated that the most likely post-translational modification of the H-chain is at the C-terminal domain. Here, our results not only provide a theoretical basis for the genetic modification of silk fiber as a functional biomaterial but also are of great significance to establishing a new silk gland bioreactor to mass-produce exogenous proteins in an active form.

(6aR)-11-amino-N-propyl-noraporphine, a new dopamine D2 and serotonin 5-HT1A dual agonist, elicits potent antiparkinsonian action and attenuates levodopa-induced dyskinesia in a 6-OHDA-lesioned rat model of Parkinson's disease.

Parkinson's disease (PD) drug therapy remains a challenge. Dual modulation of dopamine and 5-HT receptors has emerged as a promising approach in anti-PD drug development. Taking advantage of the newly discovered aporphine analogue(s), (6aR)-11-amino-N-propyl-noraporphine (SOMCL-171), which exhibited dual D2/5-HT1A receptor agonistic activity, we studied the effects of the compound on levodopa-induced dyskinesia (LID) in a PD animal model. The results demonstrated that SOMCL-171 elicited a potent anti-PD effect in a 6-OHDA-lesioned rat model. Chronic use of SOMCL-171 reduced LID without compromising the antiparkinsonian efficacy. Furthermore, we found that the antidyskinesia effect of SOMCL-171 is associated with its 5-HT1A agonistic activity and the up-regulation of the striatal 5-HT1A receptor. The present data indicated that chronic SOMCL-171 alone produced potent antiparkinsonian effects with weak dyskinesia, compared with that of levodopa. In addition, chronic SOMCL-171 application attenuated the development of levodopa-induced LID at no expense to the antiparkinsonian efficacy. Taken together, our data suggested that dual modulation of D2/5-HT1A receptors may provide a novel approach for drug development in PD and LID.

Chiral self-assembly and reversible light modulation of a polyoxometalate complex via host-guest recognition.

Chiral self-assembly of an azobenzene-grafted POM complex has been constructed through self-crosslinking by both the electrostatic and host-guest interactions and reversibly modulated by dynamic controlling of the isomerization of photoactive groups in the complex.

In vivo site-specific integration of transgene in silkworm via PhiC31 integrase-mediated cassette exchange.

Current techniques for genetic engineering of the silkworm Bombyx mori genome utilize transposable elements, which result in positional effects and insertional mutagenesis through random insertion of exogenous DNA. New methods for introducing transgenes at specific positions are therefore needed to overcome the limitations of transposon-based strategies. Although site-specific recombination systems have proven powerful tools for genome manipulation in many organisms, their use has not yet been well established for the integration of transgenes in the silkworm. We describe a method for integrating target genes at pre-defined chromosomal sites in the silkworm via phiC31/att site-specific recombination system-mediated cassette exchange. Successful recombinase-mediated cassette exchange (RMCE) was observed in the two transgenic target strains with an estimated transformation efficiency of 3.84-7.01%. Our results suggest that RMCE events between chromosomal attP/attP target sites and incoming attB/attB sites were more frequent than those in the reciprocal direction. This is the first report of in vivo RMCE via phiC31 integrase in the silkworm, and thus represents a key step toward establishing genome manipulation technologies in silkworms and other lepidopteran species.

FLP recombinase-mediated site-specific recombination in silkworm, Bombyx mori.

A comprehensive understanding of gene function and the production of site-specific genetically modified mutants are two major goals of genetic engineering in the post-genomic era. Although site-specific recombination systems have been powerful tools for genome manipulation of many organisms, they have not yet been established for use in the manipulation of the silkworm Bombyx mori genome. In this study, we achieved site-specific excision of a target gene at predefined chromosomal sites in the silkworm using a FLP/FRT site-specific recombination system. We first constructed two stable transgenic target silkworm strains that both contain a single copy of the transgene construct comprising a target gene expression cassette flanked by FRT sites. Using pre-blastoderm microinjection of a FLP recombinase helper expression vector, 32 G3 site-specific recombinant transgenic individuals were isolated from five of 143 broods. The average frequency of FLP recombinase-mediated site-specific excision in the two target strains genome was approximately 3.5%. This study shows that it is feasible to achieve site-specific recombination in silkworms using the FLP/FRT system. We conclude that the FLP/FRT system is a useful tool for genome manipulation in the silkworm. Furthermore, this is the first reported use of the FLP/FRT system for the genetic manipulation of a lepidopteran genome and thus provides a useful reference for the establishment of genome manipulation technologies in other lepidopteran species.

Design, synthesis, and pharmacological evaluation of novel tetrahydroprotoberberine derivatives: selective inhibitors of dopamine D1 receptor.

A series of new tetrahydroprotoberberine (THPB) derivatives were designed, synthesized, and tested for their binding affinity towards dopamine (D(1) and D(2)) and serotonin (5-HT(1A) and 5-HT(2A)) receptors. Many of the THPB compounds exhibited high binding affinity and activity at the dopamine D(1) receptor, as well as high selectivity for the D(1) receptor over the D(2), 5-HT(1A), and 5-HT(2A) receptors. Among these, compound 19c exhibited a promising D(1) receptor binding affinity (K(i)=2.53nM) and remarkable selectivity versus D(2)R (inhibition=81.87%), 5-HT(1A)R (inhibition=61.70%), and 5-HT(2A)R (inhibition=24.96%). Compared with l-(S)-stepholidine (l-SPD) (D(1)K(i)=6.23nM, D(2)K(i)=56.17nM), compound 19c showed better binding affinity for the D(1) receptor (2.5-fold higher) and excellent D(2)/D(1) selectivity. Functional assays found compounds 18j, 18k, and 19c are pure D(1) receptor antagonists. These results indicate that removing the C10 hydroxy group and introducing a methoxy group at C11 of the pharmacophore of l-SPD can reverse the function of THPB compounds at the D(1) receptor. These results are in accord with molecular docking studies.