Electro-thermal actuation in percolative ferroelectric polymer nanocomposites.

The interconversion between electrical and mechanical energies is pivotal to ferroelectrics to enable their applications in transducers, actuators and sensors. Ferroelectric polymers exhibit a giant electric-field-induced strain (>4.0%), markedly exceeding the actuation strain (≤1.7%) of piezoelectric ceramics and crystals. However, their normalized elastic energy densities remain orders of magnitude smaller than those of piezoelectric ceramics and crystals, severely limiting their practical applications in soft actuators. Here we report the use of electro-thermally induced ferroelectric phase transition in percolative ferroelectric polymer nanocomposites to achieve high strain performance in electric-field-driven actuation materials. We demonstrate a strain of over 8% and an output mechanical energy density of 11.3 J cm-3 at an electric field of 40 MV m-1 in the composite, outperforming the benchmark relaxor single-crystal ferroelectrics. This approach overcomes the trade-off between mechanical modulus and electro-strains in conventional piezoelectric polymer composites and opens up an avenue for high-performance ferroelectric actuators.

Relaxor ferroelectric polymer exhibits ultrahigh electromechanical coupling at low electric field.

Electromechanical (EM) coupling-the conversion of energy between electric and mechanical forms-in ferroelectrics has been used for a broad range of applications. Ferroelectric polymers have weak EM coupling that severely limits their usefulness for applications. We introduced a small amount of fluorinated alkyne (FA) monomers (<2 mol %) in relaxor ferroelectric poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (PVDF-TrFE-CFE) terpolymer that markedly enhances the polarization change with strong EM coupling while suppressing other polarization changes that do not contribute to it. Under a low-dc bias field of 40 megavolts per meter, the relaxor tetrapolymer has an EM coupling factor (k33) of 88% and a piezoelectric coefficient (d33) >1000 picometers per volt. These values make this solution-processed polymer competitive with ceramic oxide piezoelectrics, with the potential for use in distinct applications.

Morphology-induced dielectric enhancement in polymer nanocomposites.

The mechanism of the recently discovered enhancement of dielectric properties in dilute polymer-nanoparticle composites is investigated by experiments and computer simulations. We show that the weakening of the hydrogen bonds between the nanoparticles and the polymer chains reduces the polymer-nanoparticle composite's dielectric enhancement. The subsequent multiscale simulations investigate the attachment of solvated highly dipolar polymers to oxide nanoparticles, which leads to deposition of nanoparticle-polymer blobs during solution casting and a reduced density compared to a neat polymer film. Coarse-grained simulations of nanocomposite morphology are followed by molecular dynamics and density functional theory calculations of permittivities. The increased free volume in the nanocomposite enables easier reorientation of monomer dipoles with an applied electric field, and thus a higher dielectric permittivity. The numerical results are in excellent agreement with experimental data for PEEU and PEI nanocomposites.

On-surface cyclodehydrogenation reaction pathway determined by selective molecular deuterations.

Understanding the reaction mechanisms of dehydrogenative Caryl-Caryl coupling is the key to directed formation of π-extended polycyclic aromatic hydrocarbons. Here we utilize isotopic labeling to identify the exact pathway of cyclodehydrogenation reaction in the on-surface synthesis of model atomically precise graphene nanoribbons (GNRs). Using selectively deuterated molecular precursors, we grow seven-atom-wide armchair GNRs on a Au(111) surface that display a specific hydrogen/deuterium (H/D) pattern with characteristic Raman modes. A distinct hydrogen shift across the fjord of Caryl-Caryl coupling is revealed by monitoring the ratios of gas-phase by-products of H2, HD, and D2 with in situ mass spectrometry. The identified reaction pathway consists of a conrotatory electrocyclization and a distinct [1,9]-sigmatropic D shift followed by H/D eliminations, which is further substantiated by nudged elastic band simulations. Our results not only clarify the cyclodehydrogenation process in GNR synthesis but also present a rational strategy for designing on-surface reactions towards nanographene structures with precise hydrogen/deuterium isotope labeling patterns.

Structural Insight in the Interfacial Effect in Ferroelectric Polymer Nanocomposites.

Both experimental results and theoretical models suggest the decisive role of the filler-matrix interfaces on the dielectric, piezoelectric, pyroelectric, and electrocaloric properties of ferroelectric polymer nanocomposites. However, there remains a lack of direct structural evidence to support the so-called interfacial effect in dielectric nanocomposites. Here, a chemical mapping of the interfacial coupling between the nanofiller and the polymer matrix in ferroelectric polymer nanocomposites by combining atomic force microscopy-infrared spectroscopy (AFM-IR) with first-principles calculations and phase-field simulations is provided. The addition of ceramic fillers into a ferroelectric polymer leads to augmentation of the local conformational disorder in the vicinity of the interface, resulting in the local stabilization of the all-trans conformation (i.e., the polar ß phase). The formation of highly polar and inhomogeneous interfacial regions, which is further enhanced with a decrease of the filler size, has been identified experimentally and verified by phase-field simulations and density functional theory (DFT) calculations. This work offers unprecedented structural insights into the configurational disorder-induced interfacial effect and will enable rational design and molecular engineering of the filler-matrix interfaces of electroactive polymer nanocomposites to boost their collective properties.

Chirality-induced relaxor properties in ferroelectric polymers.

Relaxor ferroelectrics exhibit outstanding dielectric, electromechanical and electrocaloric properties, and are the materials of choice for acoustic sensors, solid-state coolers, transducers and actuators1-4. Despite more than five decades of intensive study, relaxor ferroelectrics remain one of the least understood material families in ferroelectric materials and condensed matter physics5-14. Here, by combining X-ray diffraction, atomic force microscope infrared spectroscopy and first-principles calculations, we reveal that the relaxor behaviour of ferroelectric polymers originates from conformational disorder, completely different from classic perovskite relaxors, which are typically characterized by chemical disorder. We show that chain chirality is essential to the formation of the disordered helix conformation arising from local distortions of gauche torsional angles, which consequently give rise to relaxor properties in polymers. This study not only sheds light on the fundamental mechanisms of relaxor ferroelectrics, but also offers guidance for the discovery of new ferroelectric relaxor organic materials for flexible, scalable and biocompatible sensor and energy applications.

Engineering Edge States of Graphene Nanoribbons for Narrow-Band Photoluminescence.

Solid-state narrow-band light emitters are on-demand for quantum optoelectronics. Current approaches based on defect engineering in low-dimensional materials usually introduce a broad range of emission centers. Here, we report narrow-band light emission from covalent heterostructures fused to the edges of graphene nanoribbons (GNRs) by controllable on-surface reactions from molecular precursors. Two types of heterojunction (HJ) states are realized by sequentially synthesizing GNRs and graphene nanodots (GNDs) and then coupling them together. HJs between armchair GNDs and armchair edges of the GNR are coherent and give rise to narrow-band photoluminescence. In contrast, HJs between the armchair GNDs and the zigzag ends of GNRs are defective and give rise to nonradiative states near the Fermi level. At low temperatures, sharp photoluminescence emissions with peak energy range from 2.03 to 2.08 eV and line widths of 2-5 meV are observed. The radiative HJ states are uniform, and the optical transition energy is controlled by the band gaps of GNRs and GNDs. As these HJs can be synthesized in a large quantity with atomic precision, this finding highlights a route to programmable and deterministic creation of quantum light emitters.

Large-Scale Phonon Calculations Using the Real-Space Multigrid Method.

Phonons are fundamental to understanding the dynamical and thermal properties of materials. However, first-principles phonon calculations are usually limited to moderate-size systems due to their high computational requirements. We implemented the finite displacement method (FDM) in the highly parallel real-space multigrid (RMG) suite of codes to study phonon properties. RMG scales from desktops to clusters and supercomputers containing thousands of nodes, fully supports graphics processing units (GPUs), including multiple GPUs per node, and is very suitable for large-scale electronic structure calculations. It is used as the core computational kernel to calculate the force constants matrix with FDM. By comparing with other widely used density functional theory packages and experimental data from inelastic neutron scattering, we demonstrate that RMG is very accurate in calculating forces at small displacements from equilibrium positions. The calculated phonon band structures and vibrational spectra for a variety of different systems are in very good agreement with plane-wave-based density functional theory codes, Quantum ESPRESSO, CASTEP and VASP, and these results have been validated comparing with inelastic neutron scattering experimental data measured at the VISION spectrometer at the Spallation Neutron Source.

Step edge-mediated assembly of periodic arrays of long graphene nanoribbons on Au(111).

The influence of substrate steps on the bottom-up synthesis of atomically precise graphene nanoribbons (GNRs) on an Au(111) surface is investigated. Straight surface steps are found to promote the assembly of long and compact arrays of polymers with enhanced interchain π-π stacking interactions, which create a steric hindrance effect on cyclodehydrogenation to suppress the H passivation of polymer ends. The modified two-stage growth process results in periodic arrays of GNRs with doubled average length near step edges.

Ferroelectric polymers exhibiting behaviour reminiscent of a morphotropic phase boundary.

Piezoelectricity-the direct interconversion between mechanical and electrical energies-is usually remarkably enhanced at the morphotropic phase boundary of ferroelectric materials1-4, which marks a transition region in the phase diagram of piezoelectric materials and bridges two competing phases with distinct symmetries1,5. Such enhancement has enabled the recent development of various lead and lead-free piezoelectric perovskites with outstanding piezoelectric properties for use in actuators, transducers, sensors and energy-harvesting applications5-8. However, the morphotropic phase boundary has never been observed in organic materials, and the absence of effective approaches to improving the intrinsic piezoelectric responses of polymers9,10 considerably hampers their application to flexible, wearable and biocompatible devices. Here we report stereochemically induced behaviour in ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) copolymers, which is similar to that observed at morphotropic phase boundaries in perovskites. We reveal that compositionally tailored tacticity (the stereochemical arrangement of chiral centres related to the TrFE monomers11,12) can lead to intramolecular order-to-disorder evolution in the crystalline phase and thus to an intermediate transition region that is reminiscent of the morphotropic phase boundary, where competing ferroelectric and relaxor properties appear simultaneously. Our first-principles calculations confirm the crucial role of chain tacticity in driving the formation of this transition region via structural competition between the trans-planar and 3/1-helical phases. We show that the P(VDF-TrFE) copolymer with the morphotropic composition exhibits a longitudinal piezoelectric coefficient of -63.5 picocoulombs per newton, outperforming state-of-the-art piezoelectric polymers10. Given the flexibility in the molecular design and synthesis of organic ferroelectric materials, this work opens up the way for the development of scalable, high-performance piezoelectric polymers.

Seamless Staircase Electrical Contact to Semiconducting Graphene Nanoribbons.

Electrical contact to low-dimensional (low-D) materials is a key to their electronic applications. Traditional metal contacts to low-D semiconductors typically create gap states that can pin the Fermi level (EF). However, low-D metals possessing a limited density of states at EF can enable gate-tunable work functions and contact barriers. Moreover, a seamless contact with native bonds at the interface, without localized interfacial states, can serve as an optimal electrode. To realize such a seamless contact, one needs to develop atomically precise heterojunctions from the atom up. Here, we demonstrate an all-carbon staircase contact to ultranarrow armchair graphene nanoribbons (aGNRs). The coherent heterostructures of width-variable aGNRs, consisting of 7, 14, 21, and up to 56 carbon atoms across the width, are synthesized by a surface-assisted self-assembly process with a single molecular precursor. The aGNRs exhibit characteristic vibrational modes in Raman spectroscopy. A combined scanning tunneling microscopy and density functional theory study reveals the native covalent-bond nature and quasi-metallic contact characteristics of the interfaces. Our electronic measurements of such seamless GNR staircase constitute a promising first step toward making low resistance contacts.

Controllable conversion of quasi-freestanding polymer chains to graphene nanoribbons.

In the bottom-up synthesis of graphene nanoribbons (GNRs) from self-assembled linear polymer intermediates, surface-assisted cyclodehydrogenations usually take place on catalytic metal surfaces. Here we demonstrate the formation of GNRs from quasi-freestanding polymers assisted by hole injections from a scanning tunnelling microscope (STM) tip. While catalytic cyclodehydrogenations typically occur in a domino-like conversion process during the thermal annealing, the hole-injection-assisted reactions happen at selective molecular sites controlled by the STM tip. The charge injections lower the cyclodehydrogenation barrier in the catalyst-free formation of graphitic lattices, and the orbital symmetry conservation rules favour hole rather than electron injections for the GNR formation. The created polymer-GNR intraribbon heterostructures have a type-I energy level alignment and strongly localized interfacial states. This finding points to a new route towards controllable synthesis of freestanding graphitic layers, facilitating the design of on-surface reactions for GNR-based structures.

Selective sensing of ethylene and glucose using carbon-nanotube-based sensors: an ab initio investigation.

Functionalized carbon nanotubes have great potential for nanoscale sensing applications, yet many aspects of their sensing mechanisms are not understood. Here, two paradigmatic sensor configurations for detection of biologically important molecules are investigated through ab initio calculations: a non-covalently functionalized nanotube for glucose detection and a covalently functionalized nanotube for ethylene detection. Glucose and ethylene control key life processes of humans and plants, respectively, despite of their structural and chemical simplicity. The sensors' electrical conductance and transmission coefficients are evaluated at the full density-functional theory level via the non-equilibrium Green's function method. We also investigate the effects of the density of the receptors, the band gaps of the nanotubes, the source-drain voltages, and the atomic modification of the receptor on detection sensitivities. A clear atomistic picture emerges about the mechanisms involved in glucose and ethylene sensing. While semiconducting nanotubes exhibit good sensitivities in both cases, the current through metallic nanotubes is only weakly affected by analyte attachment. These quantitative results could guide the design of improved sensors.

Active extracellular substances of Bacillus thuringiensis ITRI-G1 induce microalgae self-disruption for microalgal biofuel.

Microalgal cultures are a clean and sustainable means to use solar energy for CO2 fixation and fuel production. Microalgae grow efficiently and are rich in oil, but recovering that oil is typically expensive and consumes much energy. Therefore, effective and low-cost techniques for microalgal disruption and oil or lipid extraction are required by the algal biofuel industry. This study introduces a novel technique that uses active extracellular substances to induce microalgal cell disruption. A bacterium indigenous to Taiwan, Bacillus thuringiensis, was used to produce the active extracellular substances, which were volatile compounds with high thermal stability. Approximately 74% of fresh microalgal cells were disrupted after a 12-h treatment with the active extracellular substances. Algal lipid extraction efficiency was improved and the oil extraction time was decreased by approximately 37.5% compared with the control treatment. The substances effectively disrupted fresh microalgal cells but not dehydrated microalgal cells. An analysis of microalgal DNA from fresh cells after disruption treatment demonstrated typical DNA laddering, indicating that disruption may have resulted from programmed cell death. This study revealed that biological treatments are environmentally friendly methods for increasing microalgal lipid extraction efficiency, and introduced a microalgal cell self-disruption mechanism.

Continuous lipid extraction of microalgae using high-pressure carbon dioxide.

Sequestering carbon, purifying water, and creating biofuel materials using microalgae are of global interest in the R&D field. However, extracting algal oil consumes a high amount of energy, which is an obstacle for the biofuel market. Nontoxic and recyclable high-pressure CO2 extraction processes are being developed by numerous researchers; however, most of these processes use batch operations mixed with a large amount of co-solvent and require improvement. We fabricated a continuous high-pressure CO2 extraction system, evaluating the optimal parameters for the extraction process. The various parameter tests included temperature, pressure, pretreatment methods, ratio, and the species of co-solvent. We integrated the optimal parameters from previous tests, using a 5-d continuous operation. Compared with traditional solvent extraction, a 90.56% extraction yield ratio was achieved using this continuous extraction method. This shows the stable, high extraction yields of this continuous high-pressure CO2 extraction system.

Self-organized and cu-coordinated surface linear polymerization.

We demonstrate a controllable surface-coordinated linear polymerization of long-chain poly(phenylacetylenyl)s that are self-organized into a "circuit-board" pattern on a Cu(100) surface. Scanning tunneling microscopy/spectroscopy (STM/S) corroborated by ab initio calculations, reveals the atomistic details of the molecular structure, and provides a clear signature of electronic and vibrational properties of the poly(phenylacetylene)s chains. Notably, the polymerization reaction is confined epitaxially to the copper lattice, despite a large strain along the polymerized chain that subsequently renders it metallic. Polymerization and depolymerization reactions can be controlled locally at the nanoscale by using a charged metal tip. This control demonstrates the possibility of precisely accessing and controlling conjugated chain-growth polymerization at low temperature. This finding may lead to the bottom-up design and realization of sophisticated architectures for molecular nano-devices.

Electronic control over attachment and self-assembly of alkyne groups on gold.

Self-assembled monolayers are the basis for molecular nanodevices, flexible surface functionalization, and dip-pen nanolithography. Yet self-assembled monolayers are typically created by a rather inefficient process involving thermally driven attachment reactions of precursor molecules to a metal surface, followed by a slow and defect-prone molecular reorganization. Here we demonstrate a nonthermal, electron-induced approach to the self-assembly of phenylacetylene molecules on gold that allows for a previously unachievable attachment of the molecules to the surface through the alkyne group. While thermal excitation can only desorb the parent molecule due to prohibitively high activation barriers for attachment reactions, localized injection of hot electrons or holes not only overcomes this barrier but also enables an unprecedented control over the size and shape of the self-assembly, defect structures, and the reverse process of molecular disassembly from a single molecule to a mesoscopic length scale. Electron-induced excitation may therefore enable new and highly controlled approaches to molecular self-assembly on a surface.

Theory of nitrogen doping of carbon nanoribbons: edge effects.

Nitrogen doping of a carbon nanoribbon is profoundly affected by its one-dimensional character, symmetry, and interaction with edge states. Using state-of-the-art ab initio calculations, including hybrid exact-exchange density functional theory, we find that, for N-doped zigzag ribbons, the electronic properties are strongly dependent upon sublattice effects due to the non-equivalence of the two sublattices. For armchair ribbons, N-doping effects are different depending upon the ribbon family: for families 2 and 0, the N-induced levels are in the conduction band, while for family 1 the N levels are in the gap. In zigzag nanoribbons, nitrogen close to the edge is a deep center, while in armchair nanoribbons its behavior is close to an effective-mass-like donor with the ionization energy dependent on the value of the band gap. In chiral nanoribbons, we find strong dependence of the impurity level and formation energy upon the edge position of the dopant, while such site-specificity is not manifested in the magnitude of the magnetization.

Supramolecular self-assembly of π-conjugated hydrocarbons via 2D cooperative CH/π interaction.

Supramolecular self-assembly on well-defined surfaces provides access to a multitude of nanoscale architectures, including clusters of distinct symmetry and size. The driving forces underlying supramolecular structures generally involve both graphoepitaxy and weak directional nonconvalent interactions. Here we show that functionalizing a benzene molecule with an ethyne group introduces attractive interactions in a 2D geometry, which would otherwise be dominated by intermolecular repulsion. Furthermore, the attractive interactions enable supramolecular self-assembly, wherein a subtle balance between very weak CH/π bonding and molecule-surface interactions produces a well-defined "magic" dimension and chirality of supramolecular clusters. The nature of the process is corroborated by extensive scanning tunneling microscopy/spectroscopy (STM/S) measurements and ab initio calculations, which emphasize the cooperative, multicenter characters of the CH/π interaction. This work points out new possibilities for chemical functionalization of π-conjugated hydrocarbon molecules that may allow for the rational design of supramolecular clusters with a desired shape and size.