Twisted moiré conductive thermal metasurface.

Extensive investigations on the moiré magic angle in twisted bilayer graphene have unlocked the emerging field-twistronics. Recently, its optics analogue, namely opto-twistronics, further expands the potential universal applicability of twistronics. However, since heat diffusion neither possesses the dispersion like photons nor carries the band structure as electrons, the real magic angle in electrons or photons is ill-defined for heat diffusion, making it elusive to understand or design any thermal analogue of magic angle. Here, we introduce and experimentally validate the twisted thermotics in a twisted diffusion system by judiciously tailoring thermal coupling, in which twisting an analog thermal magic angle would result in the function switching from cloaking to concentration. Our work provides insights for the tunable heat diffusion control, and opens up an unexpected branch for twistronics -- twisted thermotics, paving the way towards field manipulation in twisted configurations including but not limited to fluids.

Self-Driven Photo-Polarized Water Molecule-Triggered Graphene-Based Photodetector.

Flowing water can be used as an energy source for generators, providing a major part of the energy for daily life. However, water is rarely used for information or electronic devices. Herein, we present the feasibility of a polarized liquid-triggered photodetector in which polarized water is sandwiched between graphene and a semiconductor. Due to the polarization and depolarization processes of water molecules driven by photogenerated carriers, a photo-sensitive current can be repeatedly produced, resulting in a high-performance photodetector. The response wavelength of the photodetector can be fine-tuned as a result of the free choice of semiconductors as there is no requirement of lattice match between graphene and the semiconductors. Under zero voltage bias, the responsivity and specific detectivity of Gr/NaCl (0.5 M)W/N-GaN reach values of 130.7 mA/W and 2.3 × 109 Jones under 350 nm illumination, respectively. Meanwhile, using a polar liquid photodetector can successfully read the photoplethysmography signals to produce accurate oxygen blood saturation and heart rate. Compared with the commercial pulse oximetry sensor, the average errors of oxygen saturation and heart rate in the designed photoplethysmography sensor are ~1.9% and ~2.1%, respectively. This study reveals that water can be used as a high-performance photodetector in informative industries.

High Efficient Solar Cell Based on Heterostructure Constructed by Graphene and GaAs Quantum Wells.

Despite the fascinating optoelectronic properties of graphene, the power conversion efficiency (PCE) of graphene based solar cells remains to be lifted up. Herein, it is experimentally shown that the graphene/quantum wells/GaAs heterostructure solar cell can reach a PCE of 20.2% and an open-circuit voltage (Voc ) as high as 1.16 V at 90 K. The high efficiency is a result of carrier multiplication (CM) effect of graphene in the graphene/GaAs heterostructure. Especially, the external quantum efficiency (EQE) in the ultraviolet wavelength can be improved up to 72.2% based on the heterostructure constructed by graphene/In0.15 Ga0.85 As/GaAs0.75 P0.25 quantum wells/GaAs. The EQE increases as the light wavelength decreases, which indicates more carriers can be effectively excited by the higher energy photons through CM effect. Owing to these physical characters, the graphene/GaAs heterostructure solar cell will provide a possible way to exceed Shockley-Queisser (S-Q) limit.

Broadband Insulator-Based Dynamic Diode with Ultrafast Hot Carriers Process.

The excitation, rebound, and transport process of hot carriers (HCs) inside dynamic diode (DD) based on insulators has been rarely explored due to the original stereotyped in which it was thought that the insulators are nonconductive. However, the carrier dynamics of DD is totally different from the static diode, which may bring a subverting insight of insulators. Herein, we discovered insulators could be conductive under the framework of DD; the HC process inside the rebounding procedure caused by the disappearance and reestablishment of the built-in electric field at the interface of insulator/semiconductor heterostructure is the main generation mechanism. This type of DD can response fast up to 1 µs to mechanical excitation with an output of ~10 V, showing a wide band frequency response under different input frequencies from 0 to 40 kHz. It can work under extreme environments; various applications like underwater communication network, self-powered sensor/detector in the sea environment, and life health monitoring can be achieved.

Hot Carrier Transport and Carrier Multiplication Induced High Performance Vertical Graphene/Silicon Dynamic Diode Generator.

Dynamic semiconductor diode generators (DDGs) offer a potential portable and miniaturized energy source, with the advantages of high current density, low internal impedance, and independence of the rectification circuit. However, the output voltage of DDGs is generally as low as 0.1-1 V, owing to energy loss during carrier transport and inefficient carrier collection, which requires further optimization and a deeper understanding of semiconductor physical properties. Therefore, this study proposes a vertical graphene/silicon DDG to regulate the performance by realizing hot carrier transport and collection. With instant contact and separation of the graphene and silicon, hot carriers are generated by the rebounding process of built-in electric fields in dynamic graphene/silicon diodes, which can be collected within the ultralong hot electron lifetime of graphene. In particular, monolayer graphene/silicon DDG outputs a high voltage of 6.1 V as result of ultrafast carrier transport between the monolayer graphene and silicon. Furthermore, a high current of 235.6 nA is generated due to the carrier multiplication in graphene. A voltage of 17.5 V is achieved under series connection, indicating the potential to supply electronic systems through integration design. The graphene/silicon DDG has applications as an in situ energy source for harvesting mechanical energy from the environment.

Polarized Water Driven Dynamic PN Junction-Based Direct-Current Generator.

There is a rising prospective in harvesting energy from the environment, as in situ energy is required for the distributed sensors in the interconnected information society, among which the water flow energy is the most potential candidate as a clean and abundant mechanical source. However, for microscale and unordered movement of water, achieving a sustainable direct-current generating device with high output to drive the load element is still challenging, which requires for further exploration. Herein, we propose a dynamic PN water junction generator with moving water sandwiched between two semiconductors, which outputs a sustainable direct-current voltage of 0.3 V and a current of 0.64 µA. The mechanism can be attributed to the dynamic polarization process of water as moving dielectric medium in the dynamic PN water junction, under the Fermi level difference of two semiconductors. We further demonstrate an encapsulated portable power-generating device with simple structure and continuous direct-current voltage output of 0.11 V, which exhibits its promising potential application in the field of wearable devices and the IoTs.

Wind driven semiconductor electricity generator with high direct current output based on a dynamic Schottky junction.

With the fast development of the internet of things (IoTs), distributed sensors are frequently used and small and portable power sources are highly demanded. However, current portable power sources such as lithium batteries have low capacity and need to be replaced or recharged frequently. A portable power source which can continuously generate electrical power in situ will be an ideal solution. Herein, we demonstrate a wind driven semiconductor electricity generator based on a dynamic Schottky junction, which can output a continuous direct current with an average value of 4.4 mA (with a maximum value of 8.4 mA) over 740 seconds. Compared with a previous metal/semiconductor generator, the output current is one thousand times higher. Furthermore, this wind driven generator has been used as a turn counter, due to its stable output, and also to drive a graphene ultraviolet photodetector, which shows a responsivity of 35.8 A W-1 under 365 nm ultraviolet light. Our research provides a feasible method to achieve wind power generation and power supply for distributed sensors in the future.

Van der Waals Integrated Silicon/Graphene/AlGaN Based Vertical Heterostructured Hot Electron Light Emitting Diodes.

Silicon-based light emitting diodes (LED) are indispensable elements for the rapidly growing field of silicon compatible photonic integration platforms. In the present study, graphene has been utilized as an interfacial layer to realize a unique illumination mechanism for the silicon-based LEDs. We designed a Si/thick dielectric layer/graphene/AlGaN heterostructured LED via the van der Waals integration method. In forward bias, the Si/thick dielectric (HfO2-50 nm or SiO2-90 nm) heterostructure accumulates numerous hot electrons at the interface. At sufficient operational voltages, the hot electrons from the interface of the Si/dielectric can cross the thick dielectric barrier via the electron-impact ionization mechanism, which results in the emission of more electrons that can be injected into graphene. The injected hot electrons in graphene can ignite the multiplication exciton effect, and the created electrons can transfer into p-type AlGaN and recombine with holes resulting a broadband yellow-color electroluminescence (EL) with a center peak at 580 nm. In comparison, the n-Si/thick dielectric/p-AlGaN LED without graphene result in a negligible blue color EL at 430 nm in forward bias. This work demonstrates the key role of graphene as a hot electron active layer that enables the intense EL from silicon-based compound semiconductor LEDs. Such a simple LED structure may find applications in silicon compatible electronics and optoelectronics.

Van der Waals contacted MoOx staked ZnO/GaN vertical heterostructured ultraviolet light emitting diodes.

Since the discovery of two dimensional (2D) materials, there has been a gold rush for van der Waals integrated 2D material heterostructure based optoelectronic devices. Van der Waals integration involves the physical assembly of the components of the device. In the present work, we extended van der Waals integration from 2D materials to three-dimensional (3D) materials, and herein we uniquely designed a van der Waals contacted light emitting diode based on MoOx staked ZnO/GaN heterostructure. The presence of the MoOx layer between n-type ZnO and p-type GaN leads to the confinement of electrons and an increase in the electron charge density at n-type ZnO. The n-type MoOx, a well-known hole injection layer, favors the availability of holes at the ZnO site, leading to the efficient recombination of electrons and holes at the ZnO site, which results in predominant high-intensity UV-EL emission around 380 nm in both forward and reverse bias.

Interfacial Built-In Electric Field-Driven Direct Current Generator Based on Dynamic Silicon Homojunction.

Searching for light and miniaturized functional device structures for sustainable energy gathering from the environment is the focus of energy society with the development of the internet of things. The proposal of a dynamic heterojunction-based direct current generator builds up new platforms for developing in situ energy. However, the requirement of different semiconductors in dynamic heterojunction is too complex to wide applications, generating energy loss for crystal structure mismatch. Herein, dynamic homojunction generators are explored, with the same semiconductor and majority carrier type. Systematic experiments reveal that the majority of carrier directional separation originates from the breaking symmetry between carrier distribution, leading to the rebounding effect of carriers by the interfacial electric field. Strikingly, NN Si homojunction with different Fermi levels can also output the electricity with higher current density than PP/PN homojunction, attributing to higher carrier mobility. The current density is as high as 214.0 A/m2, and internal impedance is as low as 3.6 kΩ, matching well with the impedance of electron components. Furthermore, the N-i-N structure is explored, whose output voltage can be further improved to 1.3 V in the case of the N-Si/Al2O3/N-Si structure, attributing to the enhanced interfacial barrier. This approach provides a simple and feasible way of converting low-frequency disordered mechanical motion into electricity.

Graphene/Semiconductor Heterostructure Wireless Energy Harvester through Hot Electron Excitation.

Recharging the batteries by wireless energy facilitates the long-term running of the batteries, which will save numerous works of battery maintenance and replacement. Thus, harvesting energy form radio frequency (RF) waves has become the most promising solution for providing the micropower needed for wireless sensor applications, especially in a widely distributed 4G/5G wireless network. However, the current research on rectenna is mainly focused on the integrated antenna coupled with metal-insulator-metal tunneling diodes. Herein, by adopting the plasmon excitation of graphene and quantum tunneling process between graphene and GaAs or GaN, we demonstrated the feasibility of harvesting energy from the 915 MHz wireless source belonging to 5G in the FR1 range (450 MHz-6 GHz) which is also known as sub-6G. The generated current and voltage can be observed continuously, with the direction defined by the built-in field between graphene and GaAs and the incident electromagnetic waves treated as the quantum energy source. Under the RF illumination, the generated current increases rapidly and the value can reach in the order of 10-8-10-7 A. The harvester can work under the multiple channel mode, harvesting energy simultaneously from different flows of wireless energy in the air. This research will open a new avenue for wireless harvesting by using the ultrafast process of quantum tunneling and unique physical properties of graphene.

Surface States Enhanced Dynamic Schottky Diode Generator with Extremely High Power Density Over 1000 W m-2.

The overloaded energy cost has become the main concern of the now fast developing society, which make novel energy devices with high power density of critical importance to the sustainable development of human society. Herein, a dynamic Schottky diode based generator with ultrahigh power density of 1262.0 W m-2 for sliding Fe tip on rough p-type silicon is reported. Intriguingly, the increased surface states after rough treatment lead to an extremely enhanced current density up to 2.7 × 105 A m-2, as the charged surface states can effectively accelerate the carriers through large atomic electric field, while the reflecting directions are regulated by the built-in electric field of the Schottky barrier. This research provides an open avenue for utilizing the surface states in semiconductors in a subversive way, which can co-utilize the atomic electric field and built-in electric field to harvest energy from the mechanical movements, especially for achieving an ultrahigh current density power source.

Direct-Current Generator Based on Dynamic PN Junctions with the Designed Voltage Output.

The static PN junction is the foundation of integrated circuits. Herein, we pioneer a high current density generation by mechanically moving N-type semiconductor over P-type semiconductor, named as the dynamic PN junction. The establishment and destruction of the depletion layer causes the redistribution and rebounding of diffusing carriers by the built-in field, similar to a capacitive charge/discharge process of PN junction capacitance during the movement. Through inserting dielectric layer at the interface of the dynamic PN junction, output voltage can be improved and designed numerically according to the energy level difference between the valence band of semiconductor and conduction band of dielectric layer. Especially, the dynamic MoS2/AlN/Si generator with open-circuit voltage of 5.1 V, short-circuit current density of 112.0 A/m2, power density of 130.0 W/m2, and power-conversion efficiency of 32.5% has been achieved, which can light up light-emitting diode timely and directly. This generator can continuously work for 1 h, demonstrating its great potential applications.

Tunable Dynamic Black Phosphorus/Insulator/Si Heterojunction Direct-Current Generator Based on the Hot Electron Transport.

Static heterojunction-based electronic devices have been widely applied because carrier dynamic processes between semiconductors can be designed through band gap engineering. Herein, we demonstrate a tunable direct-current generator based on the dynamic heterojunction, whose mechanism is based on breaking the symmetry of drift and diffusion currents and rebounding hot carrier transport in dynamic heterojunctions. Furthermore, the output voltage can be delicately adjusted and enhanced with the interface energy level engineering of inserting dielectric layers. Under the ultrahigh interface electric field, hot electrons will still transfer across the interface through the tunneling and hopping effect. In particular, the intrinsic anisotropy of black phosphorus arising from the lattice structure produces extraordinary electronic, transport, and mechanical properties exploited in our dynamic heterojunction generator. Herein, the voltage of 6.1 V, current density of 124.0 A/m2, power density of 201.0 W/m2, and energy-conversion efficiency of 31.4% have been achieved based on the dynamic black phosphorus/AlN/Si heterojunction, which can be used to directly and synchronously light up light-emitting diodes. This direct-current generator has the potential to convert ubiquitous mechanical energy into electric energy and is a promising candidate for novel portable and miniaturized power sources in the in situ energy acquisition field.

A High Current Density Direct-Current Generator Based on a Moving van der Waals Schottky Diode.

Traditionally, Schottky diodes are used statically in the electronic information industry while dynamic or moving Schottky diode-based applications are rarely explored. Herein, a novel Schottky diode named "moving Schottky diode generator" is designed, which can convert mechanical energy into electrical energy by means of lateral movement between the graphene/metal film and semiconductor. The mechanism is based on the built-in electric field separation of the diffusing carriers in moving Schottky diode. A current-density output up of 40.0 A m-2 is achieved through minimizing the contact distance between metal and semiconductor, which is 100-1000 times higher than former piezoelectric and triboelectric nanogenerators. The power density and power conversion efficiency of the heterostructure-based generator can reach 5.25 W m-2 and 20.8%, which can be further enhanced by Schottky junction interface design. Moreover, the graphene film/semiconductor moving Schottky diode-based generator behaves better flexibility and stability, which does not show obvious degradation after 10 000 times of running, indicating its great potential in the usage of portable energy source. This moving Schottky diode direct-current generator can light up a blue light-emitting diode and a flexible graphene wristband is demonstrated for wearable energy source.

Gate tunable surface plasmon resonance enhanced graphene/Ag nanoparticles-polymethyl methacrylate/graphene/p-GaN heterostructure light-emitting diodes.

By combining the surface plasmon enhancement technique with gating effect, a tunable blue lighting emitting diode (LED) based on graphene/Ag nanoparticles (NPs)-polymethyl methacrylate (PMMA)/graphene/p-GaN heterostructure has been achieved. The surface plasmon enhancement is introduced through spin-coating Ag nanoparticles on graphene/p-GaN heterostructure while the gating effect is demonstrated through a graphene/PMMA/graphene sandwich structure, where the top graphene layer acts as the gate electrode. Compared with initial graphene/p-GaN heterostructure LEDs, the electroluminescence (EL) emission intensity of Ag NPs/graphene/p-GaN heterostructure LEDs has been largely enhanced, attributing to the surface plasmon resonance (SPR) of Ag nanoparticles. The EL emission intensity of graphene/Ag NPs-PMMA/graphene/p-GaN heterostructure LEDs can further be gate-tunable effectively through exerting a static voltage between the sandwich structure, which tunes the Fermi level of graphene contacting with p-GaN. These results indicate that through sophisticated design, graphene/Ag NPs-PMMA/graphene/p-GaN heterostructure LEDs can be a potential candidate for many essential electronic and optoelectronic applications.

Gap-Mode Surface-Plasmon-Enhanced Photoluminescence and Photoresponse of MoS2.

2D materials hold great potential for designing novel electronic and optoelectronic devices. However, 2D material can only absorb limited incident light. As a representative 2D semiconductor, monolayer MoS2 can only absorb up to 10% of the incident light in the visible, which is not sufficient to achieve a high optical-to-electrical conversion efficiency. To overcome this shortcoming, a "gap-mode" plasmon-enhanced monolayer MoS2 fluorescent emitter and photodetector is designed by squeezing the light-field into Ag shell-isolated nanoparticles-Au film gap, where the confined electromagnetic field can interact with monolayer MoS2 . With this gap-mode plasmon-enhanced configuration, a 110-fold enhancement of photoluminescence intensity is achieved, exceeding values reached by other plasmon-enhanced MoS2 fluorescent emitters. In addition, a gap-mode plasmon-enhanced monolayer MoS2 photodetector with an 880% enhancement in photocurrent and a responsivity of 287.5 A W-1 is demonstrated, exceeding previously reported plasmon-enhanced monolayer MoS2 photodetectors.

Enhanced performance of a graphene/GaAs self-driven near-infrared photodetector with upconversion nanoparticles.

Near-infrared photodetectors (NIRPDs) have attracted great attention because of their wide range of applications in many fields. Herein, a novel self-driven NIRPD at the wavelength of 980 nm is reported based on the graphene/GaAs heterostructure. Extraordinarily, its sensitivity to light illumination (980 nm) is far beyond the absorption limitation of GaAs (874 nm). This means that the photocurrent originates from the separation of photo-induced carriers in graphene, which is caused by the vertically built-in electric field formed through the high quality van der Waals contact between graphene and GaAs. Moreover, after introducing NaYF4:Yb3+/Er3+ upconversion nanoparticles (UCNPs) onto the graphene/GaAs heterojunction, the responsivity increases to be as superior as 5.97 mA W-1 and the corresponding detectivity is 1.1 × 1011 cm Hz0.5 W-1 under self-driven conditions. This dramatic improvement is mainly ascribed to the radiative energy transfer from UCNPs to the graphene/GaAs heterostructure. The high-quality and self-driven UCNPs/graphene/GaAs heterostructure NIRPD holds significant potential for practical application in low-consumption and large-scale optoelectronic devices.

ZnO quantum dot-doped graphene/h-BN/GaN-heterostructure ultraviolet photodetector with extremely high responsivity.

A ZnO quantum dot  photo-doped graphene/h-BN/GaN-heterostructure ultraviolet photodetector with extremely high responsivity of more than 1915 A W-1 and detectivity of more than 1.02 × 1013 Jones (Jones = cm Hz1/2 W-1) has been demonstrated. The interfaced h-BN layer increases the barrier height at the graphene/GaN heterojunction, which decreases the dark current and improves the on/off current ratio of the device. The photo-doping effect increases the barrier height and carrier concentration at the graphene/h-BN/GaN heterojunction, thus the responsivity is improved from 1473 A W-1 to 1915 A W-1 and the detectivity is improved from 5.8 × 1012 to 1.0 × 1013 Jones. Moreover, all of the responsivity and detectivity values are the highest values among all the graphene-based ultraviolet photodetectors.