Construction of 3D-graphene/NH2-MIL-125 nanohybrids via amino-ionic liquid dual-mode bonding for advanced acetaldehyde photodegradation under high humidity.

The development of metal organic framework (MOF)-based π-π conjugated structures capable of effectively transforming H2O from humid air to •OH radicals for VOCs photodegradation is a significant but difficult task. Herein, an amino-ionic liquid (NH2-IL) based dual-mode bridging strategy was proposed to connect 3D-graphene with NH2-MIL-125 forming IL-3DGr/NM(Ti) nanohybrids for advanced acetaldehyde photodegradation. The rational integration of these components was responsible for: (1) maintaining π-π conjugated electron transport system; (2) generating abundant coordinatively unsaturated sites and oxygen vacancies; (3) increasing surface area of the nanohybrids. With these attributes, IL-3DGr/NM(Ti) demonstrated enhanced charge separation and transportation electrochemical impedance spectroscopy (EIS): 7-times), acetaldehyde adsorption (22 %), light absorption (bandgap: 1.51 eV). The rapid H2O adsorption and photoconversion to •OH radicals by IL-3DGr/NM(Ti) enabled it to demonstrate superior CH3CHO photodegradation rate under high humidity, surpassing many state-of-the-art photocatalysts by 9 to 187 times under static air conditions and with nearly similar catalyst dosages* (photocatalyst weight and initial acetaldehyde concentration (mg ppm-1) ratio). Interestingly, the IL-3DGr/NM(Ti) photocatalytic activity was enhanced by increasing RH% up-to 80 %. Besides, the nanohybrids demonstrated tremendous stability, with only a 3.9 % decline observed after 5 consecutive-cycles. This strategy provides new prospects to improve the compatibility of graphene/MOF materials for futuristic photoelectrical applications under high humidity.

Swellable Array Strategy Based on Designed Flexible Double Hypercross-linked Polymers for Synergistic Adsorption of Toluene and Formaldehyde.

High-capacity adsorption and removal of complex volatile organic compounds (VOCs) from real-world environments is a tough challenge for researchers. Herein, a swellable array adsorption strategy was proposed to realize the synergistic adsorption of toluene and formaldehyde on the flexible double hypercross-linked polymers (FD-HCPs). FD-HCPs exhibited multiple adsorption sites awarded by a hydrophobic benzene ring/pyrrole ring and a hydrophilic hydroxyl structural unit. The array benzene ring, hydroxyl, and pyrrole N sites in FD-HCPs effectively captured toluene and formaldehyde molecules through π-π conjugation and electrostatic interaction and weakened their mutual competitive adsorption. Interestingly, the strong binding force of toluene molecules to the skeleton deformed the pore structure of FD-HCPs and generated new adsorption microenvironments for the other adsorbate. This behavior significantly improved the adsorption capacity of FD-HCPs for toluene and formaldehyde by 20% under multiple VOCs. Moreover, the pyrrole group in FD-HCPs greatly hindered H2O molecule diffusion in the pore, thus efficiently weakening the competitive adsorption of H2O toward VOCs. These fascinating properties enabled FD-HCPs to achieve synergistic adsorption for multicomponent VOC vapor under a highly humid environment and overcame single-species VOC adsorption properties on state-of-the-art porous adsorbents. This work provides the practical feasibility of synergistic adsorption to remove complex VOCs in real-world environments.

Accelerating the Fe(III)/Fe(II) cycle via enhanced electronic effect in NH2-MIL-88B(Fe)/TPB-DMTP-COF composite for boosting photo-Fenton degradation of sulfamerazine.

In the photo-Fenton reactions, fast recombination of photoinduced electrons and holes in Fe-based metal-organic frameworks (Fe-MOFs) slows Fe(III)/Fe(II) cycle, which remains big challenge that significantly retards the overall process. Herein, NH2-MIL-88B(Fe) (NM88) was modified with 3,5-diaminobenzoic acid (DB) and TPB-DMTP-COF (COF-OMe) to in situ construct NM88(DB)0.85/COF-OMe composite that could strongly harvest the visible light for photo-Fenton degradation of sulfamerazine (SMR). With the addition of DB, electron-donating effect of NM88 was strengthened, which then promoted amino groups to react with aldehyde groups (Schiff-base), and thus highly facilitated the interfacial contact between NM88 and COF-OMe. Such modifications increased the degradation rate constants for NM88(DB)0.85/COF-OMe to 15.1 and 17.3 times that of NM88 and COF-OMe respectively with good reusability. Moreover, the catalyst exhibited 32-170 times higher degradation kinetics in comparison to other reported catalysts. Results showed that due to the Schiff-base reaction between NM88(DB) and COF-OMe, electron density on Fe(III) was decreased; and the photogenerated electrons of COF-OMe moved to NM88(DB) to reduce Fe(III), thus resulting in the generation of highly active Fe(II) and ·OH species. Furthermore, the main reactive species were determined to be ·OH and ·O2- by trapping experiments, and a possible mechanism of the degradation system followed Z-scheme charge transfer.

Structure Determination of Alkynyl-Protected Gold Nanocluster Au22 (t BuC≡C)18 and Its Thermochromic Luminescence.

An alkynyl-protected gold nanocluster, Au22 (t BuC≡C)18 (1), has been synthesized and its structure has been determined by single-crystal X-ray diffraction. The molecular structure consists of a Au13 cuboctahedron kernel and three [Au3 (t BuC≡C)4 ] trimeric staples. The cluster 1 has strong luminescence in the solid state with a 15 % quantum yield, and it displays interesting thermochromic luminescence as revealed by temperature-dependent emission spectra. The enhanced room-temperature emission is characterized as thermally activated delayed fluorescence.

Rational construction of a library of M29 nanoclusters from monometallic to tetrametallic.

Exploring intermetallic synergy has allowed a series of alloy nanoparticles with prominent chemical-physical properties to be produced. However, precise alloying based on a maintained template has long been a challenging pursuit, and little has been achieved for manipulation at the atomic level. Here, a nanosystem based on M29(S-Adm)18(PPh3)4 (where S-Adm is the adamantane mercaptan and M is Ag/Cu/Au/Pt/Pd) has been established, which leads to the atomically precise operation on each site in this M29 template. Specifically, a library of 21 species of nanoclusters ranging from monometallic to tetrametallic constitutions has been successfully prepared step by step with in situ synthesis, target metal-exchange, and forced metal-exchange methods. More importantly, owing to the monodispersity of each nanocluster in this M29 library, the synergetic effects on the optical properties and stability have been mapped out. This nanocluster methodology not only provides fundamental principles to produce alloy nanoclusters with multimetallic compositions and monodispersed dopants but also provides an intriguing nanomodel that enables us to grasp the intermetallic synergy at the atomic level.

Fe-Catalyzed decarbonylative cascade reaction of N-aryl cinnamamides with aliphatic aldehydes to construct 3,4-dihydroquinolin-2(1H)-ones.

A practical Fe-catalyzed decarbonylative cascade reaction of N-aryl cinnamamides with aliphatic aldehydes to provide C3 alkylated 3,4-dihydroquinolin-2(1H)-ones is developed. Aliphatic aldehydes were oxidatively decarbonylated into 1°, 2° and 3° alkyl radicals conveniently, allowing for the subsequent cascade construction of C(sp3)-C(sp3) and C(sp3)-C(sp2) bonds via radical addition and HAS-type cyclization. The importance of the amide linkage and the selectivity of the 6-endo-trig over 5-exo-trig cyclization pathway were elucidated by experimental results and DFT calculations.

Insight into 6π Electrocyclic Reactions of 1,8-Dioxatetraene.

A variety of benzofuranone-based spiroisochromenes were originally designed and synthesized to gain insight into the oxa-6π electrocyclic reaction of cis,cis-1,8-dioxatetraene for the first time. The stability of the 1,8-dioxatetraene intermediate is governed by its steric congestion and can be fine-tuned through modification of the backbone structure, leading to the reactivity differences in the 6π electrocyclic reaction and the emergence of photochromic properties.