Experimental Study of Amphibolite-Basalt (SiO2-AlO3-CaO-Fe2O3) Glasses for Glass-Ceramic Materials Production.

The paper presents research on multicomponent glasses obtained from natural and secondary raw materials, i.e., basalt, amphibolite, and cullet. The raw materials were used as potential sets to produce mineral fibres or glass-ceramic materials. FTIR spectroscopy and XRD studies were carried out to identify the composition of the phase type in the glass sets. The results were supported by SEM-EDS microstructural studies of the obtained materials. The ability of the melts to crystallize and their basic properties required in producing mineral fibres, i.e., the hardness and the acidity modulus, were also determined. In the glass samples after the crystallization process, the spectroscopic studies revealed an increase in the half-width of the band at 1200-800 cm-1 and splitting at the values of about 870 cm-1 and 970 cm-1. These changes probably indicate the formation of pyroxene-type crystalline phases. Moreover, based on the XRD results, it was confirmed that the obtained materials were fully amorphous. After annealing at 800 °C for 2 h, the materials show a small proportion of crystalline phases. For the materials annealed at higher temperatures, clear peaks from the crystalline phases were represented mainly by pyroxenes. The proportion of crystalline phases in the samples was also found to rise with increasing temperature, and the hardness values for the basalt glasses and glasses after crystallization rose from 753 to 946 HV0.05. Such an effect positively affects the properties of the obtained glass-ceramic materials based on the proposed sets. However, in the case of mineral fibres, crystallization at early 2 h at 800 °C can be a disadvantageous feature from the point of view of their application because crystalline phases can lead to fibre damage after a short period of operation; this will be confirmed in this study.

Experimental vs. Theoretical Viscosity Determination of Aluminosilicate Glasses.

The paper presents the results of studies on the viscosity of the glass mass in various temperature ranges, determining the basic technological parameter, very important from the point of view of melting and forming. For this purpose, six sets based on natural raw materials such as basalt, dolomite, and amphibolite, modified with different amounts of float glass cullet, were melted. The melting process was carried out in an electric furnace at the temperature of 1450 °C for 2 h. Using the dilatometric method, high-temperature microscopy and theoretical calculation methods, the viscosity of the produced glasses was determined in various temperature ranges. Comparative analyses of the employed methods were carried out. The significance of the applied calculation methods for aluminosilicate glasses depending on the basic chemical composition of the glasses was presented. The relationship between the manner of incorporating amphoteric ions Al3+, Fe3+ and Mg2+ into the glass structure and the change in viscosity in the temperature range corresponding to the working point range at 104 [dPa·s] viscosity and the relaxation range-Tg temperature at 1013 [dPa·s] viscosity was justified. It was justified that in order to plot the viscosity curve with the correct slope in the forming range for aluminosilicate glasses, it is appropriate to use the two-point method based on the fixed viscosity points of 104 [dPa·s] and 1013 [dPa·s].

Dominant-Negative Form of SIGIRR: SIGIRRΔE8 Promotes Tumor Growth Through Regulation of Metabolic Pathways.

Colorectal carcinoma is the leading cause of cancer-related death. Previously we have shown that tumor suppressor single immunoglobulin interleukin-1-related receptor (SIGIRR) is frequently inactivated in human colorectal cancer by the increased expression of a novel SIGIRR isoform (SIGIRRΔE8). SIGIRRΔE8 showed increased retention in the cytoplasm and loss of complex glycan modification compared to the full-length SIGIRR. Now we found that the arginine residues located in the C-terminus of SIGIRRΔE8 serve as an endoplasmic reticulum retention signal and are required for resident protein ribophorin 1 (RPN1) interaction. In addition, we found that SIGIRRΔE8 exerts a direct impact on cell metabolism through interaction with the adenosine triphosphate synthase in the colorectal cancer cells. SIGIRRΔE8 expression promoted the metabolic shift through upregulation of mammalian target of rapamycin signaling pathway and dysregulation of mitochondrial function to promote survival and proliferation of colon cancer cells in xenograft model.

Effect of Dolomite Addition on the Structure and Properties of Multicomponent Amphibolite Glasses.

The structure and properties of the glass can be modified by introducing appropriate additives. Dolomite is one of the primary raw materials modifying the properties of glass, in which the essential component is calcium-magnesium double carbonate CaCO3∙MgCO3. The paper presents the research results on glasses obtained by smelting pure amphibolite and amphibolite modified with 10 and 20% dolomite additives. The raw material used was mined in the Poland region of Lower Silesia. The glass melting process was carried out in an electric furnace at 1450 °C for 2 h. The structure and properties of the glasses and crystallization products were determined by Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS). Viscosity and Vickers microhardness were also measured. It was found that the modification of amphibolite glass by adding dolomite affects the glasses' properties and structure. The research results determined the effect of dolomite addition on the properties of alumino-silicate glasses in terms of the mineral fibre products used in the construction industry.

Microglia/macrophage-derived human CCL18 promotes glioma progression via CCR8-ACP5 axis analyzed in humanized slice model.

Factors released from glioma-associated microglia/macrophages (GAMs) play a crucial role in glioblastoma multiforme (GBM) progression. Here, we study the importance of CCL18, a cytokine expressed in human but not in rodent GAMs, as a modulator of glioma growth. Since CCL18 signaling could not be studied in classical mouse glioma models, we developed an approach by transplanting induced pluripotent stem cell-derived human microglia and human glioma cells into mouse brain slices depleted of their intrinsic microglia. We observe that CCL18 promotes glioma cell growth and invasion. Chemokine (C-C motif) receptor 8 (CCR8) is identified as a functional receptor for CCL18 on glioma cells, and ACP5 (acid phosphatase 5) is revealed as an important part of the downstream signaling cascade for mediating glioma growth. We conclude, based on the results from an in vitro, ex vivo humanized glioma model and an in vivo GBM model that microglia/macrophage-derived CCL18 promotes glioma growth.

Application of Statistical Methods in Predicting the Properties of Glass-Ceramic Materials Obtained from Inorganic Solid Waste.

This paper uses mathematical methods as the basic tool at the stage of experiment planning. The importance of research programming applications was shown using the theory of experiments and the STATISTICA software. The method of experiment planning used in the case of studying the properties of a mixture, depending on its composition, features considerable complexity. The aim of the statistical analysis was to determine the influence of variable chemical composition of waste materials on selected properties of glass-ceramic materials. A statistical approach to multicomponent systems, such as ceramic sets, enables the selection of appropriate amounts of raw materials through the application of 'a plan for mixtures'. To utilize the raw waste materials, e.g., slags from a solid waste incinerator, fly or bottom ashes, in the modeling of new materials, a mathematical relationship was developed, which enables estimating, based on the waste chemical composition, selected technological and practical properties of the glass so as to obtain a material featuring the required technological-practical parameters. For the obtained glasses, a comparative analysis of the experimentally and computationally determined properties was carried out: transformation temperature, liquidus temperature, density, and thermal expansion coefficient. The obtained high theoretical approximation (at the level of determination correlation coefficient R2 > 0.8) confirms the suitability of the polynomial model for mixtures for applications in the design of new glass-ceramic products.

Glial cell line-derived neurotrophic factor increases matrix metallopeptidase 9 and 14 expression in microglia and promotes microglia-mediated glioma progression.

Glial cell line-derived neurotrophic factor (GDNF) is released by glioma cells and promotes tumor growth. We have previously found that GDNF released from the tumor cells is a chemoattractant for microglial cells, the immune cells of the central nervous system. Here we show that GDNF increases matrix metalloproteinase (MMP) 9 and MMP14 expression in cultured microglial cells from mixed sexes of neonatal mice. The GDNF-induced microglial MMP9 and MMP14 upregulation is mediated by GDNF family receptor alpha 1 receptors and dependent on p38 mitogen-activated protein kinase signaling. In organotypic brain slices, GDNF promotes the growth of glioma and this effect depends on the presence of microglia. We also previously found that MMP9 and MMP14 upregulation can be mediated by Toll-like receptor (TLR) 2 signaling and here we demonstrate that GDNF increases the expression of TLR1 and TLR2. In conclusion, GDNF promotes the pro-tumorigenic phenotype of microglia.

Influence of Sandblasting and Chemical Etching on Titanium 99.2-Dental Porcelain Bond Strength.

The metal-ceramic interface requires proper surface preparation of both metal and ceramic substrates. This process is complicated by the differences in chemical bonds and physicochemical properties that characterise the two materials. However, adequate bond strength at the interface and phase composition of the titanium-bioceramics system is essential for the durability of dental implants and improving the substrates' functional properties. In this paper, the authors present the results of a study determining the effect of mechanical and chemical surface treatment (sandblasting and etching) on the strength and quality of the titanium-low-fusing dental porcelain bond. To evaluate the strength of the metal-ceramic interface, the authors performed mechanical tests (three-point bending) according to EN ISO 9693 standard, microscopic observations (SEM-EDS), and Raman spectroscopy studies. The results showed that depending on the chemical etching medium used, different bond strength values and failure mechanisms of the metal-ceramic system were observed. The analyzed samples met the requirements of EN ISO 9693 for metal-ceramic systems and received strength values above 25 MPa. Higher joint strength was obtained for the samples after sandblasting and chemical etching compared to the samples subjected only to sandblasting.

Synergistic Toll-like Receptor 3/9 Signaling Affects Properties and Impairs Glioma-Promoting Activity of Microglia.

In murine experimental glioma models, TLR3 or TLR9 activation of microglial/macrophages has been shown to impair glioma growth, which could, however, not been verified in recent clinical trials. We therefore tested whether combined TLR3 and TLR9 activation of microglia/macrophages would have a synergistic effect. Indeed, combined TLR3/TLR9 activation augmented the suppression of glioma growth in organotypic brain slices from male mice in a microglia-dependent fashion, and this synergistic suppression depended on interferon ß release and phagocytic tumor clearance. Combined TLR3/TLR9 stimulation also augmented several functional features of microglia, such as the release of proinflammatory factors, motility, and phagocytosis activity. TLR3/TLR9 stimulation combined with CD47 blockade further augmented glioma clearance. Finally, we confirmed that the coactivation of TLR3/TLR9 also augments the impairment of glioma growth in vivo Our results show that combined activation of TLR3/TLR9 in microglia/macrophages results in a more efficient glioma suppression, which may provide a potential strategy for glioma treatment.SIGNIFICANCE STATEMENT Glioma-associated microglia/macrophages (GAMs) are the predominant immune cells in glioma growth and are recently considered as antitumor targets. TLRs are involved in glioma growth, but the TLR3 or TLR9 ligands were not successful in clinical trials in treating glioma. We therefore combined TLR3 and TLR9 activation of GAMs, resulting in a strong synergistic effect of tumor clearance in vitro, ex vivo, and in vivo Mechanisms of this GAM-glioma interaction involve IFNß signaling and increased tumor clearance by GAMs. Interfering with CD47 signaling had an additional impact on tumor clearance. We propose that these signaling pathways could be exploited as anti-glioma targets.

IL-17A Recruits Rab35 to IL-17R to Mediate PKCα-Dependent Stress Fiber Formation and Airway Smooth Muscle Contractility.

IL-17A is a critical proinflammatory cytokine for the pathogenesis of asthma including neutrophilic pulmonary inflammation and airway hyperresponsiveness. In this study, by cell type-specific deletion of IL-17R and adaptor Act1, we demonstrated that IL-17R/Act1 exerts a direct impact on the contraction of airway smooth muscle cells (ASMCs). Mechanistically, IL-17A induced the recruitment of Rab35 (a small monomeric GTPase) and DennD1C (guanine nucleotide exchange factor [GEF]) to the IL-17R/Act1 complex in ASMCs, resulting in activation of Rab35. Rab35 knockdown showed that IL-17A-induced Rab35 activation was essential for protein kinase Cα (PKCα) activation and phosphorylation of fascin at Ser39 in ASMCs, allowing F-actin to interact with myosin to form stress fibers and enhance the contraction induced by methacholine. PKCα inhibitor or Rab35 knockdown indeed substantially reduced IL-17A-induced stress fiber formation in ASMCs and attenuated IL-17A-enhanced, methacholine-induced contraction of airway smooth muscle. Taken together, these data indicate that IL-17A promotes airway smooth muscle contraction via direct recruitment of Rab35 to IL-17R, followed by PKCα activation and stress fiber formation.

The dynamics of vaginal and rectal Lactobacillus spp. flora in subsequent trimesters of pregnancy in healthy Polish women, assessed using the Sanger sequencing method.

BACKGROUND: Lactobacilli play an important role in maintaining vaginal health and protection against bacterial infections in the genital tract. The aim of this study is to show the dynamics of changes of the vaginal and rectal Lactobacillus flora during pregnancy by using the Sanger sequencing method. METHOD: The study included 31 healthy pregnant women without clinical signs of genitourinary infections. The material was taken in the three trimesters of pregnancy by vaginal and rectal swabs and grown on the MRS agar quantitatively to estimate the number of Lactobacillus spp. [CFU/ml]. Afterwards, 3 to 8 morphologically different lactobacilli colonies were taken for identification. Bacterial species identification was performed by 16 s rDNA sequence fragment analyses using the Sanger method. RESULTS: Among the patients tested, the most common species colonizing the vagina in the first trimester were: L. crispatus 29%, L. gasseri 19.4% and L. rhamnosus 16.1%, in the second trimester: L. crispatus 51.6%, L. gasseri 25.8%, L. rhamnosus 19.4% and L. amylovorus 16.1%, and in the third trimester the most common Lactobacillus species were: L. crispatus 25.8%, L. gasseri 25.8% and L. johnsonii 19.4%. In rectal species, the number decreased in the second and third trimesters in comparison to the first trimester (p = 0.003). An analysis of rectal dynamics showed that in the first trimester, the most common species were: L. johnsonii 19.4%, and L. plantarum 9.7%, in the second trimester: L. crispatus 9.7% and L. mucosae 6.5%, and in the third trimester: L. casei 9.7% and L. rhamnosus 9.7%. Individual dynamics of the Lactobacillus species composition showed variability, characterized by continuous, intermittent, or periodic colonization. The patients examined were mostly colonized by three Lactobacillus species in vagina (32.3%), whereas for the rectum, one Lactobacillus species during the whole pregnancy duration was common (32.3%). CONCLUSION: This study showed that in the examined group of healthy, pregnant Polish women, the vaginal Lactobacillus flora, both qualitative and quantitative, was stable during the three subsequent trimesters. In contrast, the number of rectal Lactobacillus species dramatically decreased after the first trimester.

Structural and microstructural aspects of asbestos-cement waste vitrification.

The main goal of the work was to evaluate the vitrification process of asbestos-cement waste (ACW). A mixture of 50 wt% ACW and 50 wt% glass cullet was melted in an electric furnace at 1400 °C for 90 min and then cast into a steel mold. The vitrified product was subjected to annealing. Optical microscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) were used to evaluate the effects of the vitrification. The chemical constitution of the material before and after the vitrification process was also analyzed. It was found that the vitrified product has an amorphous structure in which the components of asbestos-cement waste are incorporated. MIR spectroscopy showed that the absorption bands of chrysotile completely disappeared after the vitrification process. The results of the spectroscopic studies were confirmed by X-ray studies - no diffraction reflections from the chrysotile crystallographic planes were observed. As a result of the treatment, the fibrous asbestos construction, the main cause of its pathogenic properties, completely disappeared. The vitrified material was characterized by higher resistance to ion leaching in an aquatic environment than ACW and a smaller volume of nearly 72% in relation to the apparent volume of the substrates. The research has confirmed the high effectiveness of vitrification in neutralizing hazardous waste containing asbestos and the FT-IR spectroscopy was found to be useful to identify asbestos varieties and visualizing changes caused by the vitrification process. The work also presents the current situation regarding the utilization of asbestos-containing products.

Selection and analysis of a DNA aptamer binding α-amanitin from Amanita phalloides.

Mushroom foraging is very popular in some regions of the world. Sometimes toxic and edible mushrooms are mistaken by mushroom collectors, leading to serious human poisoning. The group of mushrooms highly dangerous for human health includes Amanita phalloides. This mushroom produces a toxic octapeptide called α-amanitin which is an inhibitor of nuclear RNA polymerase II. The inhibition of this polymerase results in the abortion of mRNA synthesis. The ingestion of A. phalloides causes liver failure due to the fact that most of the toxin is uptaken by hepatocytes. The hospitalization of poisoned patients involves the removal of the toxin from the digestive tract, its dilution in the circulatory system and the administration of therapeutic adjuvants. Since there is no effective antidote against amanitin poisoning, in this study we developed a DNA aptamer exhibiting specific binding to α-amanitin. This aptamer was selected using the SELEX (Systematic Evolution of Ligands by Exponential Enrichment) method. Next, its ability of toxin removal from aqueous solution was confirmed by pull-down assay. The aptamer region sufficient for α-amanitin binding was determined. Finally, the dissociation constant of the α-amanitin/DNA aptamer complex was calculated.

Adherence of group B streptococci to human rectal and vaginal epithelial cell lines in relation to capsular polysaccharides as well as alpha-like protein genes - pilot study.

Streptococcus agalactiae (Group B Streptococci, GBS) constitutes a risk factor for infections of the newborns born by colonized mothers. The adherence of GBS to epithelial cells has been proved to be an important factor in the colonization of mucus membranes of both human rectum and vagina. The objective of the study was to assess the adhesion of the selected GBS strains to the human colon adenocarcinoma cell line (HT-29) and human epidermoid vulvo-vaginal cells (A-431) in relation to the capsular polysaccharides and alpha-like protein genes. GBS strains from the human sources belonging to Ia, Ib, II, III and V serotypes possessing different surface alpha-like protein genes such as the alp 2, alp 3, bca, epsilon and rib in the conventional adherence assay were examined. The adherence of GBS strains to the HT-29 cell line was considerably higher than to the A-431 cell line. For GBS serotype Ia and III, a significant difference between the adhesion to the HT-29 and A-431 cell lines was presented. The adhesion of GBS strains to the HT-29 cell line depended on alpha-like protein genes. The most adhesive ones were the GBS strains containing the rib and alp 2 genes. The adherence of GBS strains to the A-431 cell line depended on both their serotype and alpha-like protein genes. Serotype III adhered to the A-431 cells most tightly, particularly the strains containing the rib and alp 2 genes. GBS strains containing the rib gene adhered to the HT-29 and A-431 cell lines more firmly than GBS strains containing other alpha-like protein genes.

Antibacterial activity of selected standard strains of lactic acid bacteria producing bacteriocins--pilot study.

INTRODUCTION: In this paper, an attempt was made to evaluate the antibacterial potential of standard strains of lactic acid bacteria (LAB) producing bacteriocins of various classes, thus demonstrating various mechanisms of cell membrane damages against the Streptococcus agalactiae strains (Group B Streptococcus, GBS), depending on surface polysaccharides and surface alpha-like protein genes. MATERIALS/METHODS: Antimicrobial property of the strains of L. plantarum C 11, L. sakei DSMZ 6333, and L. lactis ATCC 11454 producing bacteriocins: JK and EF plantaricins, sakacin and nisin, respectively, against the GBS strains was evaluated. The chosen to the study GBS strains were represented by serotypes Ia, Ib, II, III, V and they had bca, epsilon, rib, alp2 or alp3 alpha-like protein genes. The experiment was conducted by means of suspension culture and the bacteria count was determined using the serial dilution method. RESULTS: A great ability of L. plantarum C 11 strain was proven to inhibit the GBS growth. The strain of L. sakei DSMZ 6333 did not demonstrate any ability to inhibit the growth of GBS, whereas L. lactis ATCC 11454 inhibited the growth of S. agalactiae indicator strains to a minor extent. Statistically significant differences were demonstrated between the GBS strains representing various serotypes against the antimicrobial activity of model LAB strains. The least sensitive to the activity of bacteriocins were the strains representing serotypes Ib and III, whereas the strains representing serotype II were the most sensitive. The sensitivity of the GBS strains to the antimicrobial activity of LAB was not dependent on alpha-like protein genes. DISCUSSION: Among the LAB standard strains producing bacteriocins, the strongest antimicrobial property was observed in the strain of L. plantarum C 11. Because of the generally known and verified strong antagonistic property of the strains of L. plantarum species against indicator bacteria, it is necessary to further pursue the research presented in this paper.