RESUMO
INTRODUCTION: This study aimed to compare achieved movements with predicted movements after 28-week use of Invisalign Lite aligners. SETTINGS AND SAMPLE POPULATION: The digital impressions of 21 subjects treated with Invisalign Lite at a private practice and in the dental clinic (Milan, Italy) were taken and analysed. Subjects were Caucasian with a mean age of 20.1 years. METHODS: Patients were analysed at two time points: at T0, before starting therapy, and at T1, after 28 weeks of treatment with Invisalign clear aligners, with a 2-week change interval. The changes that occurred between T0 and T1 were compared to the predicted changes between T0 and Ts (setup/ClinCheck). Tooth movement performance was estimated through variables calculated as the difference between obtained and planned movements. RESULTS: In both maxillary and mandibular arches, the teeth that exhibited the least accurate expression of torque were the central incisors. Tip was not accurate on maxillary central incisors and canines, mandibular central incisors, lateral incisors, first premolars, second premolars and first molars. Rotations were under-expressed on maxillary lateral incisors, canines and second premolars and on mandibular central incisors, canines, first premolars, second premolars and first molars. The overall angular changes showed a tendency to underperformance. Transverse linear changes were accurate with a significant overperformance on maxillary and mandibular first molars. CONCLUSIONS: Torque correction of maxillary central incisors, as well as rotational correction of most of the teeth, showed significant differences between what was planned and what was obtained.
Assuntos
Aparelhos Ortodônticos Removíveis , Técnicas de Movimentação Dentária , Estudos Prospectivos , Humanos , Resultado do Tratamento , Maxila , Mandíbula , Torque , Incisivo/fisiologia , Masculino , Feminino , Adolescente , Adulto Jovem , AdultoRESUMO
This review analyzes muscle activity following mandibular condylar fracture (CF), with a focus on understanding the changes in masticatory muscles and temporomandibular joint (TMJ) functioning. MATERIALS AND METHODS: The review was conducted following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines. A search was performed on online databases using the keywords "masticatory muscles" AND ("mandibular fracture" OR "condylar fracture"). The eligibility criteria included clinical trials involving human intervention and focusing on muscle activity following a condylar fracture. RESULTS: A total of 13 relevant studies were reviewed. Various studies evaluated muscle activity using clinical evaluation, bite force measurement, electromyography (EMG), magnetic sensors and radiological examinations to assess the impact of mandibular fractures on masticatory muscles. CONCLUSIONS: Mandibular condylar fractures can lead to significant changes in muscle activity, affecting mastication and TMJ functioning. EMG and computed tomography (CT) imaging play crucial roles in assessing muscle changes and adaptations following fractures, providing valuable information for treatment planning and post-fracture management. Further research is required to explore long-term outcomes and functional performance after oral motor rehabilitation in patients with facial fractures. Standardized classifications and treatment approaches may help improve the comparability of future studies in this field.
RESUMO
BACKGROUND: The present study aimed to evaluate the changes in palate dimension and morphology after treatment of functional posterior crossbite (FPXB) with elastodontic devices (EAs). METHODS: The treatment group (TG) consisted of 25 subjects (mean age 7.3 ± 0.9 years) who received treatment with EA for one year. The control group (CG) comprised 14 untreated subjects (mean age 6.8 ± 0.7 years). INCLUSION CRITERIA: intra-oral scan registered before (T0) and after treatment (T1), FPXB with a mandibular shift towards the crossbite site of ≥ 2 mm, class I molar relationship. EXCLUSION CRITERIA: missing teeth, anterior crossbite, temporomandibular disorders, previous orthodontic treatment, carious lesions, mobility of deciduous posterior teeth, craniofacial deformities. Digital models were analyzed to assess the inter-canine (ICW) and inter-molar widths (IMW) and the corresponding emi-lateral measurements (eICW and eIMW) using the median palatine plane as reference. According to a specific 3D imaging technology, the morphology and symmetry of the palate was investigated by analysing the 3D deviation between the two specular models of the palate. RESULTS: At T0, both groups showed a significantly narrower dimension of eICW and eIMW at the crossbite side compared to the non-crossbite side (p < 0.05). Also, the 3D deviation analysis demonstrates a limited matching percentage of the original/mirrored models in both TG (81.12%) and CG (79.36%), confirming the asymmetry of the palate. The area of mis-matching was located at the alveolar bone level. At T1, subjects in the TG showed a significant increment of ICW and IMW (p < 0.05), a reduction of the differences of eICW and eIMW between both sides (p < 0.05) and an increment of the percentage matching (TG = 92.32%) (p < 0.05), suggesting a significant recovery of the palatal asymmetry. No significant changes were found between T0 and T1 in the CG (p > 0.05). CONCLUSIONS: EAs could be successfully used to correct FPXB in mixed dentition and could restore the harmonious development of the palate in children.
Assuntos
Imageamento Tridimensional , Má Oclusão , Técnica de Expansão Palatina , Humanos , Imageamento Tridimensional/métodos , Má Oclusão/diagnóstico por imagem , Má Oclusão/terapia , Má Oclusão/patologia , Palato/patologiaRESUMO
As already known, orthodontic treatment presents a factor of plaque retention, promoting an increase of bacterial growth in the oral cavity. Nevertheless, after orthodontic debonding an alteration of the previous microbiological status may occur. The present study was designed to assess variations among six bacterial species in the oral cavity and the status of oral health after orthodontic debonding. At the end of the fixed orthodontic treatment, 30 patients were divided into three groups based on the type of retention: I - 10 patients were treated with upper and lower fixed retention devices, II - 10 with upper and lower removable retention devices, and III - 10 with lower fixed and upper removable retention devices. To assess the alterations of oral microbiota after orthodontic debonding, two salivary swabs were collected for each individual: the first immediately after debonding (T0) and the other one 6 weeks later (T1). Six species, the ones most correlated with the development of caries and periodontal disease, were selected for microbiological analysis with Real-time PCR: Streptococcus mutans, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola, and Fusobacterium nucleatum. Furthermore, in order to correlate the microbiological outcomes with the clinical condition, oral health indexes at T0 and T1 were assessed for all patients. Six weeks after debonding, the salivary levels of the bacteria investigated tend to decrease and the values of the oral health indexes tend to improve with all types of treatment considered (p<.05). Salivary bacteria levels and oral health are similarly influenced by fixed and/or removable orthodontic retentions.
Assuntos
Doenças Periodontais , Faringe , Humanos , Porphyromonas gingivalis , Fusobacterium nucleatum , Streptococcus mutans , Aggregatibacter actinomycetemcomitansRESUMO
OBJECTIVE: The present systematic review was carried out to evaluate both qualitatively and quantitatively the effectiveness of the cervical vertebral maturation (CVM) method in predicting the pubertal growth spurt. METHODS: PubMed, PMC, Scopus, SciELO, Cochrane Central Register of Controlled Trials (CENTRAL), and Web of Science databases were searched. The research included every article published from 1970 to June 2019, featuring the keywords: ("cervical vertebrae" OR ("cervical" AND "vertebrae") AND ("orthodontics" OR "growth and development" OR ("growth" AND "development") OR ("growth"). The Preferred Reporting Items for Reporting Systematic Reviews and Meta Analyses (PRISMA) protocol was adopted, and quality assessments modified from the "Strengthening the Reporting of Observational Studies in Epidemiology" (STROBE) and the "Standards for the Reporting of Diagnostic Accuracy Studies" (STARD) were performed to conduct this systematic review. RESULTS: Initially, 1284 articles were found. All the articles were then examined, and 43 studies met the inclusion criteria. Sixteen articles had low-quality scores, 25 had moderate scores, and 2 had high scores. The results showed a moderate to high statistically significant correlation between the CVM and other maturation methods. CONCLUSION: Overall, the CVM method can be considered an effective method and may be used with other skeletal indices for the radiographic assessment of skeletal maturity, and also to identify the growth peak in growing patients.
RESUMO
OBJECTIVE: Wiskott-Aldrich syndrome (WAS) is a rare X-linked primary immunodeficiency, characterized by micro-thrombocytopenia, recurrent infections, and eczema. This study aims to describe common oral manifestations and evaluate oral microbioma of WAS patients. MATERIAL AND METHODS: In this cohort study, 11 male WAS patients and 16 male healthy controls were evaluated in our Center between 2010 and 2018. Data about clinical history, oral examination, Gingival Index (GI) and Plaque Index (PI) were collected from both groups. Periodontal microbiological flora was evaluated on samples of the gingival sulcus. RESULTS: WAS subjects presented with premature loss of deciduous and permanent teeth, inclusions, eruption disturbance, and significantly worse GI and PI. They also showed a trend toward a higher total bacterial load. Fusobacterium nucleatum, reported to contribute to periodontitis onset, was the most prevalent bacteria, together with Porphyromonas gingivalis and Tannerella forsythia. CONCLUSIONS: Our data suggest that WAS patients are at greater risk of alterations in the oral cavity. The statistically higher incidence of periodontitis and the trend to higher prevalence of potentially pathological bacterial species in our small cohort, that should be confirmed in future in a larger population, underline the importance of dentistry monitoring as part of the multidisciplinary management of WAS patients.
Assuntos
Microbiota , Periodontite , Síndrome de Wiskott-Aldrich , Aggregatibacter actinomycetemcomitans , Criança , Estudos de Coortes , Feminino , Humanos , Masculino , Periodontite/epidemiologia , Periodontite/microbiologia , Prevotella intermediaRESUMO
The aim of this in vitro study was to evaluate the effects of a single dose application of two daily toothpastes on enamel exposed to acid attack. The research was conducted on human molars enamel fragments (n = 72). The two different toothpastes active ingredients were sodium fluoride (NaF) and stannous fluoride (SnF2). They were compared in protecting the surface of the enamel exposed to three acids: citric acid, lactic acid and hydrochloric acid. A spectrophotometer was used to measure the calcium ions and phosphate released in the solutions by the enamel specimens. Afterward, ionic concentrations were analyzed through the t-Student test, in order to estimate the significance level (p < 0.05) of the solubility differences obtained between the treatment and control groups. Finally, sample surfaces were analyzed with scanning electron microscopy and X-ray energy dispersive spectroscopy (SEM/EDX). The two analyzed toothpastes did not reveal any statistically significant variation in the release of calcium and phosphate (p > 0.05). Nevertheless, acid-resistant deposits were detected in samples treated with stannous fluoride and exposed to lactic acid, though the presence of tin ion deposits on samples treated with stannous fluoride was not shown. A single dose of a fluoride-based toothpaste before different acids attack, in simulated oral cavity conditions, did not show a significant preventive effect.
RESUMO
BACKGROUND: Mock-up based approach allows the preview of the aesthetic rehabilitation, however, it is crucial that the mock-up does not differ from the expected aesthetic outcomes. With CAD-CAM technologies, it is possible to directly create mock-ups from virtual planned smile project, with greater accuracy and efficiency compared to the conventional moulded mock-ups. In this study, we investigated the trueness of mock-ups obtained with milling and 3D printing technology and a full digital work-flow system. METHODS: Ten adults subjects were included and digital smile design/digital wax-up were performed to enhance the aesthetic of maxillary anterior region. Ten milled mock-ups and 10 prototyped mock-ups were obtained from the original .stl file and a digital analysis of trueness was carried out by superimposing the scanned-milled mock-ups and the scanned-prototyped mock-ups to the digital wax-up, according to the surface-to-surface matching technique. Specific linear measurements were performed to investigate and compare the dimensional characteristics of the physical manufactures, the 3D project and the scanned mock-ups. All data were statistically analyzed. A clinical test was also performed to assess the fitting of the final manufacture. RESULTS: The prototyped mock-ups showed a significant increment of the transversal measurements (p < 0.001) while the milled mock-ups showed a significant increment of all vertical and transversal measurements (p < 0.001). The prototyped mock-ups showed good fitting after clinical tests while none of the milled mock-ups showed good adaptation (no fitting or significant clinical compensation required). Deviation analysis from the original 3D project reported a greater matching percentage for the scanned-milled mock-ups (80,31% ± 2.50) compared to the scanned-prototyped mock-ups (69,17% ± 2.64) (p < 0.001). This was in contrast with the findings from linear measurements as well as from the clinical test and may have been affected by a reductive algorithmic computation after digitization of physical mock-ups. CONCLUSION: Both prototype and milled mock-ups showed a slight dimensional increment comparing to the original 3D project, with milled-mock-ups showing less fitting after clinical tests. Caution must be taken when assessing the trueness of scanned manufacture since an intrinsic error in the system can underestimate the dimensions of the real object.
Assuntos
Desenho Assistido por Computador , Estética Dentária , Adulto , Humanos , Impressão Tridimensional , SorrisoRESUMO
The accuracy of 3D reconstructions of the craniomaxillofacial region using cone beam computed tomography (CBCT) is important for the morphological evaluation of specific anatomical structures. Moreover, an accurate segmentation process is fundamental for the physical reconstruction of the anatomy (3D printing) when a preliminary simulation of the therapy is required. In this regard, the objective of this study is to evaluate the accuracy of four different types of software for the semiautomatic segmentation of the mandibular jaw compared to manual segmentation, used as a gold standard. Twenty cone beam computed tomography (CBCT) with a manual approach (Mimics) and a semi-automatic approach (Invesalius, ITK-Snap, Dolphin 3D, Slicer 3D) were selected for the segmentation of the mandible in the present study. The accuracy of semi-automatic segmentation was evaluated: (1) by comparing the mandibular volumes obtained with semi-automatic 3D rendering and manual segmentation and (2) by deviation analysis between the two mandibular models. An analysis of variance (ANOVA) was used to evaluate differences in mandibular volumetric recordings and for a deviation analysis among the different software types used. Linear regression was also performed between manual and semi-automatic methods. No significant differences were found in the total volumes among the obtained 3D mandibular models (Mimics = 40.85 cm3, ITK-Snap = 40.81 cm3, Invesalius = 40.04 cm3, Dolphin 3D = 42.03 cm3, Slicer 3D = 40.58 cm3). High correlations were found between the semi-automatic segmentation and manual segmentation approach, with R coefficients ranging from 0,960 to 0,992. According to the deviation analysis, the mandibular models obtained with ITK-Snap showed the highest matching percentage (Tolerance A = 88.44%, Tolerance B = 97.30%), while those obtained with Dolphin 3D showed the lowest matching percentage (Tolerance A = 60.01%, Tolerance B = 87.76%) (p < 0.05). Colour-coded maps showed that the area of greatest mismatch between semi-automatic and manual segmentation was the condylar region and the region proximate to the dental roots. Despite the fact that the semi-automatic segmentation of the mandible showed, in general, high reliability and high correlation with the manual segmentation, caution should be taken when evaluating the morphological and dimensional characteristics of the condyles either on CBCT-derived digital models or physical models (3D printing).
RESUMO
BACKGROUND: The patients' request for treatment with clear aligners is constantly increasing. The aligners permit to the clinicians a valid way to solve a lot of orthodontic cases but the patients' compliance and the clinicians' capabilities and knowledge of the technique is fundamental for the outcome. METHODS: Seventy-two digital models of 18 consecutive patients treated with Invisalign and Smart Track aligners for 14 weeks were analyzed. The operator positioned 24 points on each model and were obtained the values of arch depth and perimeter of arch before and after the treatment. The variations of measurement were calculated with t student test. RESULTS: A decrease of arch depth and perimeter was found from t0 to t1 and the most relevant difference was observed in the upper arch depth with a decrease of 1.3 mm and in the upper arch perimeter with a difference of 1.1 mm. CONCLUSIONS: There was always a decrease of the values of arch depth and arch perimeter at the end of the treatment, especially in the upper arch. These changes must be considered by the clinicians to perform a better treatment to obtain the most predictable results and a patient's higher satisfaction.
Assuntos
Aparelhos Ortodônticos Removíveis , Técnicas de Movimentação Dentária , Estética , HumanosRESUMO
INTRODUCTION: Self-ligating appliances are purposed to expand the arches, but evidence on stability of the result is lacking. We measured the width of maxillary and mandibular arches and torque changes after treatment with the use of passive self-ligating appliances and assessed stability at the 2-year follow-up. METHODS: Maxillary and mandibular 3-dimensional (3D) models from 32 subjects (mean initial age 14.9 ± 0.9 years), consecutively treated with the use of self-ligating appliances, were obtained before, immediately after, and 2 years after treatment. Dental arches were examined with the use of 3D software to evaluate differences in transverse arch dimensions and torque values. RESULTS: An incremental increase of arch widths was recorded, especially regarding maxillary and mandibular premolars. The increase in the transverse diameters was associated with a significant positive torque gain. No significant changes in arch perimeter and depth were recorded. In the retention period, slight significant changes in transverse diameters were recorded, and a transverse diameter constriction detected. Torque values remained almost unchanged in the follow-up period. CONCLUSIONS: Transverse arch dimensions, along with torque values, increased significantly after treatment with the use of a passive self-ligating appliance. In the 2 years following treatment, a tendency to transverse diameter restriction, especially for the maxillary and mandibular premolars, was observed.
Assuntos
Arco Dental/anatomia & histologia , Má Oclusão/terapia , Aparelhos Ortodônticos , Técnica de Expansão Palatina , Técnicas de Movimentação Dentária/métodos , Torque , Adolescente , Adulto , Análise de Variância , Dente Pré-Molar , Desenho Assistido por Computador , Técnica de Fundição Odontológica , Feminino , Seguimentos , Humanos , Imageamento Tridimensional/métodos , Masculino , Má Oclusão/patologia , Mandíbula , Maxila , Modelos Dentários , Níquel , Desenho de Aparelho Ortodôntico , Técnica de Expansão Palatina/instrumentação , Software , Titânio , Coroa do Dente/anatomia & histologia , Técnicas de Movimentação Dentária/instrumentação , Resultado do Tratamento , Adulto JovemRESUMO
BACKGROUND: Orthodontic therapy is used to solve numerous oral problems, but the use of fixed oral devices can also impact negatively the oral cavity, if the treatment is not steadily under control. The aim of this study is to evaluate tooth, bone and soft tissues lesions due to the presence of fixed orthodontic appliances. METHODS: One hundred patients with fixed orthodontic appliances were included in the study. In particular, 20 patients with rapid palatal expander (RPE), 20 patients with Forsus appliance, 20 patients with a fixed multibracket appliance treatment, 20 patients with just the lower vestibular multibracket treatment and 20 patients with both upper and lower vestibular multibracket treatment. An accurate oral examination of the oral cavity, comprehending teeth, bone and soft tissues, was carried out thoroughly, in order to find possible lesions caused by the fixed orthodontic treatment. RESULTS: Concerning RPE, 35% patients had reversible palatal lesions, while 45% patients had the impression of the appliance on the tongue. Periodontal damages were observed in 5% of the patients, as well as tooth lesions (i.e. dental caries). 20% of the patients with Forsus appliance experienced the lesion on the cheek mucosa, while 10% individuals reported periodontal problems, and 15% of the subject suffered for WSL (white spot lesion) and dental caries. Upper vestibular multibracket appliance caused superior labial lesions (15%), cheek mucosal lesions (20%), gingivitis (55%), white spot lesions (WSL) of superior teeth (15%), while dental recessions and periodontitis due to the appliance were rarely observed (5%). Lower vestibular multibracket appliance was frequently the cause of inferior labial lesions (15%), cheek mucosal lesions (15%), gingivitis (50%), WSL of inferior teeth (20%) and also in lower arch dental recessions and periodontitis due to the appliance were rarely observed (5%). Patients with both superior and inferior multibracket appliance experienced upper and/or lower lip lesions (25%), lesions of cheek mucosa (25%), gingivitis (65%) and WSL (30%), and just in few cases periodontitis (10%). Data shows a more critical oral situation in patients with both superior and inferior appliances than people with one-arch therapy. CONCLUSIONS: Orthodontic therapy offers a considerable number of advantages, but it is important to underline what may be the adverse consequences also. This allows the orthodontist to inform the patient of all the possible effects of their therapeutic choice. In most cases, RPE can cause an impression of the device on the tongue and reversible lesions of the palate. On the other hand, the orthodontic fixed therapy can cause gingivitis, followed by mucosal lesions, labial lesions and WSL. For these reasons, an accurate assessment of the patients before the application of fixed orthodontic treatment is necessary. Oral hygiene instructions and motivation are very important, as well as periodic controls of the fixed oral device.
Assuntos
Cárie Dentária , Gengivite , Periodontite , Humanos , Mucosa BucalRESUMO
Minimally invasive facial rejuvenation procedures reached an all-time high in the 2016. This reveals a growing interest in a smoother, younger, and tighter look accessible using the esthetic medicine tools like botulinum toxin and dermal filler injections, laser, and microdermabrasion. Forty-five patients from 35 to 52 years old (medium age 43.8), 38 women and 7 men underwent 5 sessions of Fraxel laser, 1 session of very low G prime HA, and Microbotox injection treatments from January 2016 and January 2017, were included in this study. In this study, we demonstrated that the usage of three treatments together, like mBTX, Volite, and Fractional laser, have a better result despite every single technique alone. The clinical result showed 98% (44 patients, 6 males, 38 females) of the patients had a smoother skin surface, brighter, more hydrated, and elastic skin; 68% of our patients (31 patients, 5 males, 26 females) showed less skin defects and staining as well as less small wrinkles, thanks to Fraxel laser treatment; 98% (44 patients, 6 males, 38 females) showed tighter skin with less sebaceous gland secretion. The aim of this study was to demonstrate that the combination of three techniques acts better and faster than single treatment to contrast facial aging and to improve skin texture and quality.
Assuntos
Técnicas Cosméticas , Ácido Hialurônico/farmacologia , Lasers , Rejuvenescimento , Pele/efeitos dos fármacos , Pele/efeitos da radiação , Adulto , Face/efeitos da radiação , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Envelhecimento da Pele/efeitos dos fármacosRESUMO
INTRODUCTION: Dental agenesis is the congenital absence of a variable number of teeth due to the lack of formation of the corresponding tooth germ. The aim of this work was to investigate the syndromic conditions characterized by dental agenesis. EVIDENCE ACQUISITION: Based on the research conducted through the OMIM® (Online Mendelian Inheritance in Man) and PubMed online databases, more than ninety syndromes associated with severe or moderate agenesis have been found. EVIDENCE SYNTHESIS: The main clinical features of these syndromes are described, especially those concerning the stomatognathic apparatus, referring to the most recent literature. Among these syndromes there are three clinical conditions associated with dental agenesis that are common for the clinician: Down Syndrome, ectodermal dysplasia and labio-palatal cleft. CONCLUSIONS: It must be kept in mind that the success of the treatment of these patients is based on the compliance of the patient as well as on the collaboration among specialists.
Assuntos
Anodontia , Anodontia/complicações , Humanos , SíndromeRESUMO
BACKGROUND: Piezosurgery® represents a novel alternative technique. The Piezosurgery® is well tolerated and permits a large number of applications in described literature. The principle of Piezosurgery® consists into inducing micro-vibrations to a metallic insert with a particular custom. The aim of this article is to study and to evaluate the use of NobelActive implants in combination with piezosurgical split-crest technique in severe atrophy of the upper maxilla. This approach allows avoiding the use of onlay grafts, due to rise the trasversal width of the crestal bone, which could have more complications and uncertain prognosis. This technique allows reducing timing of implant insertion because it is not necessary to wait for the graft to heal. METHODS: Ten patients (age 45-58) are selected, presenting from class 4 to 5 by Cawood and Howell of jaws. Those underwent piezosurgical split-crest technique and simultaneous implants surgery and bone grafts. Preoperative X-ray evaluation included standard X-panoramic and CT Dental-scan. Standard chemoprophylaxis was administered to each patient. The piezosurgical split-crest procedure was combined with tissue bank fresh frozen chips and double-layer collagen membrane to improve the thickness of alveolar bone and simultaneous implant surgery. Every patient received simultaneously from 3 to 6 implants which diameter was 4.3 mm and length 10-11.5 mm. Healing abutments have been applied at 5 months from the first procedure. RESULTS: Patients were clinically monitored, and marginal bone changes were calculated using periapical radiographs, which were taken with O-ring technique at placement and upon subsequent appointments and a 1-mm measurement grid for marginal bone remodeling, again at baseline and thereafter 3 months within loading. Cumulative implant survival was 97.8% (N.=45). Mean marginal bone resorption (SD) was 1.19 (1.01) mm for the early loading group after 1 year. The use of NobelActive implants seem to reduce peak stress in both cortical and trabecular bone. CONCLUSIONS: The use of NobelActive implants was revealed ideal in patients presenting jaw atrophy. The tapered designs show an ability to dissipate the interfacial stresses of bone, therefore improving the stability and the osteointegration if used in association to split crest made with piezosurgical device.
Assuntos
Processo Alveolar/cirurgia , Aumento do Rebordo Alveolar/métodos , Implantação Dentária Endóssea/métodos , Implantes Dentários , Reconstrução Mandibular/métodos , Piezocirurgia , Bancos de Ossos , Transplante Ósseo , Humanos , Pessoa de Meia-IdadeRESUMO
Background: Oral microbiota has been at the center of cultural attention in recent years. In daily clinical practice, orthodontic appliances may be associated with an increased cariogenic risk and a worsening of preexisting periodontal diseases. Objective: The purpose of this review is to investigate the available evidence regarding the association between orthodontic appliances and changes in the quality and quantity of the oral microbiota. Design: The research included every article published up to October 2017 featuring the keywords 'Orthodontic appliance* AND (microbiological colonization OR periodontal pathogen* OR Streptococcus mutans OR Lactobacillus spp. OR Candida OR Tannerella forsythia OR Treponema denticola OR Fusobacterium nucleatum OR Aggregatibacter actinomycetemcomitans OR Prevotella intermedia OR Prevotella nigrescens OR Porphyromonas gingivalis)' and was conducted in the major medical databases. The methodological quality of selected papers was scored using the 'Swedish Council on Technology Assessment in Health Care Criteria for Grading Assessed Studies' (SBU) method. Results: Orthodontic appliances influence the oral microbiota with an increase in the counts of S. mutans and Lactobacillus spp. and in the percentage of potentially pathogenic gram-negative bacteria. Conclusions: There is moderate/high evidence regarding the association between orthodontic appliances and changes in the oral microbiota. PROSPERO registration number CRD42018091589.
RESUMO
OBJECTIVE: The aim of this study was to examine the properties of fiber-reinforced composite and stainless steel twisted retainers for orthodontic retention. METHODS: Three different span lengths (5.0, 8.0, and 14.0 mm) of fiber-reinforced composite were investigated. The three fiber-reinforced composite retainer groups were subdivided according to the storage condition (dry and wet), resulting in a total of six groups. Each stainless steel and fiber-reinforced composite group was comprised of six specimens. The three-point bending flexural test was conducted using a universal testing machine. ANOVA was used to assess differences in the maximum load and maximum stress according to the span length, material, and storage condition. Post-hoc comparisons were performed if necessary. RESULTS: The maximum stress and maximum load were significantly (p < 0.001) associated with the span length, material, and storage condition. The significant interaction between the material and span length (p < 0.001) indicated the differential effects of the material for each span length on the maximum stress and maximum load, with the difference between materials being the highest for the maximum span length. CONCLUSIONS: Our findings suggest that fiber-reinforced composite retainers may be an effective alternative for orthodontic retention in patients with esthetic concerns or allergy to conventional stainless steel wires.
RESUMO
Distraction osteogenesis (DO) is a technique that allows the generation of new bone in a gap between 2 vascularized bone surfaces in response to the application of graduated tensile stress across the bone gap.Distraction osteogenesis has become a routine treatment of choice to correct skeletal deformities and severe bone defects in the craniofacial complex over the past decade. Distraction osteogenesis has been successfully chosen in lengthening the maxilla and the mandible; in the maxilla and recently in the mandible, the jawbones have been distracted and widened transversely to relieve severe anterior dental crowding and transverse discrepancies between the dental arches.Distraction osteogenesis for maxillary advancement started in 1993 and is now widely used, especially in patients with skeletal Class III malocclusion caused by maxillary hypoplasia.The aim of this study was to present the efficiency of combined orthodontic and DO in the severe maxillary hypoplasia.A 35-year-old Italian man presented to our clinical practice with the chief complaint of esthetic and functionally problems because of skeletal Class III malocclusion with anterior crossbite.Considering that the severity of the skeletal discrepancy is remarkable but compensated by the DO potential, the combined orthodontic and DO treatment was considered adequate, like less invasive and equally effective.It was obtained a good alignment with the upper and lower arch dental alveolar maxillary advancement that allowed to correct the sagittal relationships.The patient was satisfied for the treatment results and had considerable improvement in his self-esteem.
Assuntos
Maxila , Micrognatismo/cirurgia , Ortodontia Corretiva/métodos , Osteogênese por Distração/métodos , Adulto , Humanos , Masculino , Má Oclusão/cirurgia , Maxila/anormalidades , Maxila/cirurgiaRESUMO
The aim of this study is to compare the histomorphometric data of deproteinized bovine bone (DBB) and a fully synthetic bone substitute, poly (lactic-co-glycolic) acid/hydroxyapatite (PLGA/HA) applied for sinus floor augmentation technique. Twelve maxillary atrophic ridges of 8 patients requiring major maxillary sinus floor augmentation were studied; the sites were randomly assigned to the study groups and reexamined at 6 months after grafting using cone beam computed tomography scans and biopsy samples harvested during dental implant placement. Total bone volume, residual graft material volume, and new bone volume were assessed. Measurable biopsies were available from 67% of test sites and 100% of control sites. Poly (lactic-co-glycolic) acid/hydroxyapatite grafts showed no trace of graft material, whereas DBB grafts had a mean graft area of 16.60%. Mean percent of newly formed bone tended to be greater for PLGA/HA than for DBB group. Mean total bone volume percent did not differ significantly: PLGA/HAâ=â44.45% (CI, 16.42-72.48), DBBâ=â44.11% (CI, 36.61-51.60). Deproteinized bovine bone and PLGA/HA produced similar total bone volumes. Poly (lactic-co-glycolic) acid/hydroxyapatite appeared to be completely replaced by newly formed bone, whereas DBB presented significant amounts of residual graft material. Poly (lactic-co-glycolic) acid/hydroxyapatite necessitates of more clinical trials to be considered suitable for sinus floor augmentation.
RESUMO
BACKGROUND: Patients affected by juvenile idiopathic arthritis (JIA) may have several craniofacial growth disturbances and involvements at the temporomandibular joint (TMJ). The objectives of the present study were to evaluate the clinical effectiveness of functional therapy used to reduce asymmetry of mandibular growth and TMJ disorder in patients with JIA. METHODS: By a retrospective longitudinal design, a cohort of 54 patients with JIA (mean age, 13.2±3.7 years; range, 5-17.7 years) and with TMJ involvements was enrolled in the study. Each patient, following the collection of clinical parameters, was treated for 24 months with a functional appliance individually customized by acrylic resin and resilient stainless steel with posterior and anterior metallic bite planes preventing the teeth from intercuspal contact. To evaluate differences before (T0) and after therapy (T1) of the clinical TMJ parameters, the statistical analysis by the χ2 Test was performed. RESULTS: All the patients completed successfully the study. In patients with JIA, the use of a functional appliance determined a statistically significant difference of the pain during jaw movement, maximal mouth opening, TMJ sounds and crepitations (P<0.001) and TMJ click, significantly reduced at T1 (P<0.05). CONCLUSIONS: The use of an orthodontic functional appliance determined a significant improvement, at 24 months, in many TMJ signs and symptoms in patients affected by JIA and with TMJ disorders. This study suggests that children and adolescents with JIA which presented either unilateral or bilateral moderate to severe TMJ involvement, if not treated, should be develop severe disturbances during growing.