Arthrodesis of distal interphalangeal and thumb interphalangeal joint: a retrospective cohort study of 149 cases.

BACKGROUND: Arthrodesis of finger joints is often the last line of treatment of severe pain due to osteoarthritis, rheumatoid arthritis, or mallet finger. At the Department of Orthopedic and Hand Surgery, Örebro University Hospital (ÖUH) in Sweden, the Kirschner-wire technique was standard until 2020, when the headless compression screw technique was introduced as a complement. There is no consensus on which method is superior. The purpose of this study was to examine the outcomes and complications associated with distal interphalangeal (DIP) joint and thumb interphalangeal (IP) joint arthrodesis, and to see whether these correlated with patient-dependent and treatment-related factors. METHODS: In a retrospective cohort study, we evaluated a total of 149 consecutive arthrodeses (118 DIP joint and 31 thumb IP joint) performed between 2012 and 2022. The primary outcome was risk factors for complications after arthrodesis. RESULTS: Osteoarthritis was the most common indication (56%) for arthrodesis. The majority of the patients were females (74%), and the median age was 62 (range 18-86). The complication frequency was 35%, with infection being the most common (25%). Time to completed follow up was < 12 weeks in the majority of the cases (58%). There were no significant differences in complication rate between the 136 joints operated using Kirschner wire and the 13 joints operated using headless compression screws. There was no significant increased risk of complications among smokers or patients with rheumatoid arthritis. Diabetes and surgeon experience had a significant influence on the risk of complication (p = 0.036 and p = 0.006, respectively). CONCLUSIONS: Osteoarthritis was the most common indication for arthrodesis and postoperative complications occurred at a rate similar to that reported in the existing literature. Diabetes and surgeon experience were identified as factors increasing the risk of postoperative complications in these DIP/thumb IP joint arthrodeses. However, there was no significant difference between the two techniques (Kirschner wire and headless compression screws) regarding complications. Further studies are needed in order to determine the optimal type of operation and choice of implant. TRIAL REGISTRATION: Researchweb CRIS #280,998, 26th of July 2023.

Pyrolytic Carbon Hemiarthroplasty for Proximal Interphalangeal Joint Arthritis, Long-Term Follow-Up.

PURPOSE: The purpose of this study was to assess the long-term clinical, subjective, and radiographic results of pyrocarbon hemiarthroplasty for proximal interphalangeal joint (PIPJ) arthritis at a single institution. METHODS: Patients treated with a pyrolytic carbon hemiarthroplasty between 2005 and 2015 were contacted for a clinical follow-up visit. Patients were assessed before surgery, one year after surgery, and again after a mean of 11 years (range: 6-16 years). Objective outcomes were assessed with grip strength, pinch strength, and range of motion (ROM). Subjective outcomes were assessed by the Disabilities of the Arm, Shoulder, and Hand score, Canadian Occupational Performance Measure (performance and satisfaction), and Visual Analog Scale pain scores at rest and during activity. Radiographic assessments were completed according to Sweets and Stern as modified by Wagner et al. RESULTS: A total of 68 fingers in 52 patients underwent PIPJ hemiarthroplasty. Thirty-six arthroplasties in 29 patients were available for the long-term follow-up, five patients had died, and the remaining cases were contacted by phone. Three cases were lost to follow-up. Preoperative diagnoses included 41 fingers with osteoarthritis or posttraumatic arthritis, and 27 fingers with inflammatory arthritis. Eight cases had undergone revision at the time of follow-up, and the 10-year implant survival was 72%. The revisions were performed after a mean of two years after surgery. Three patients had undergone soft-tissue procedures. Visual Analog Scale pain scores, Disabilities of the Arm, Shoulder, and Hand scores, and Canadian Occupational Performance Measure scores improved significantly compared with that before surgery. Grip strength and pinch grip remained unchanged. However, PIPJ ROM deteriorated significantly one year after surgery, when compared with that before surgery. CONCLUSIONS: Pyrocarbon hemiarthroplasty of the PIPJ has an acceptable long-term implant survival, and the significant improvement in pain scores and patient-reported outcomes is maintained over time. Pyrocarbon hemiarthroplasty could be a viable option in the management of PIPJ arthritis. Patients should be advised that PIPJ ROM deteriorates over time. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

CT-Based Micromotion Analysis After Locking Plate Fixation of AO Type C Distal Radius Fractures.

Background: Volar locking plate fixation (VLPF) is the most common method for operative fixation of distal radius fractures (DRF). The dorsal ulnar corner (DUC) can be difficult to stabilize as the fragment is small and not exposed when using the volar approach. The purpose of this study was to study fracture fragment migration after VLPF of AO type C DRF, using a volume registration technique of paired CT scans with special focus on the DUC fragment. Materials and Methods: This pilot study included ten patients with AO type C DRF, all operated with VLPF. The primary outcome was radiographic outcome. Postoperative and 1-year scans were compared and analyzed. Fragment migration was assessed with CT-based micromotion analysis (CTMA), a software technique used for volume registration of paired CT scans. Results: All plates were stable over time. Two patients showed signs of screw movement (0.2-0.35 mm and 0.35- > 1 mm respectively). Postoperative reduction was maintained, and there was no fragment migration at the 1-year follow-up except for one case with increased dorsal tilt. The DUC fragment was found in 8/10 cases, fixated in 7/8 cases, and not dislocated in any case at the 1-year follow-up. Conclusion: The CTMA results indicate that variable-angle VLPF after AO type C DRF can yield and maintain a highly stable reduction of the fracture fragments. The DUC fragment remained stable regardless of the number of screws through the fragment. CT volume registration can be a valuable tool in the detailed assessment of fracture fragment migration following volar plate fixation of DRFs.

Distal radius fractures in children aged 5-12 years: a Swedish nationwide register-based study of 25 777 patients.

BACKGROUND: Distal radius fracture (DRF) is the most common type of fracture in children. There is no clear consensus on primary treatment for complete DRFs. Kirschner wire (K-wire) fixation has been recommended, to avoid the risk of redislocation. However, recent studies have indicated that casting can be sufficient, at least for children with two or more years left to grow. There is no recent study regarding pediatric DRFs and the extent of K-wire fixations in the Swedish population. The purpose of this study was to investigate epidemiology and treatment of pediatric DRFs registered in the Swedish Fracture Register (SFR). METHODS: In this retrospective study, based on data from SFR for children aged 5-12 years with DRF between January 2015 and October 2022, we investigated epidemiology and choice of treatment. Sex, age, type of DRF, treatment, cause and mechanism of injury, were analyzed. RESULTS: In total, 25,777 patients were included, 7,173 (27%) with complete fractures. Number and peak age of girls vs. boys with fractures were 11,742 (46%), 10 years, and 14,035 (54%), 12 years, respectively. Odds ratio (OR) for a K-wire fixation in girls vs. boys was 0.81 (95% confidence interval (CI) 0.74-0.89, p < .001). With age 5 -7 years as reference, OR for age group 8-10 years was 0.88 (95% CI 0.80-0.98 p = .019) and OR for age group 11-12 years was 0.81 (95% CI 0.73-0.91 p = < .001. CONCLUSION: Casting only was the preferred treatment for all fractures (76%). Boys acquired DRFs more often than girls, with a peak age of 12 years. Younger children and boys with a complete fracture were more likely than older children and girls to receive a K-wire. Further research regarding indications for K-wiring of DRFs in the pediatric population is needed.

Pulp-to-palm distance after plate fixation of a distal radius fracture corresponds to functional outcome.

INTRODUCTION: Several factors can influence the outcome after a distal radius fracture (DRF). The aim of this study was to assess whether postoperative pulp-to-palm (PTP) distance correlated with functional outcomes after plate fixation of DRF. MATERIALS & METHODS: This is a secondary analysis of a randomized controlled trial aimed to investigate the effects of plate fixation in patients with type-C fractures. Subjects (N = 135) were divided into 2 groups based on PTP distance (equal to or higher than 0 cm) at 4 weeks postoperatively. Outcome measures were collected prospectively at 3, 6 and 12 months and included Patient-Rated Wrist Evaluation (PRWE), Quick Disabilities of the Arm Shoulder and Hand (QuickDASH) scores, wrist range of motion (ROM), Visual Analog Scale (VAS) pain scores, and hand grip strength. RESULTS: Overall, at 3 and 6 months patients with PTP > 0 cm had significantly worse outcomes (PRWE, QuickDASH, wrist ROM) than those with PTP =0 cm. At 12 months, QuickDASH and wrist ROM were still significantly worse. In the volar-plating subgroup, patients with PTP > 0 cm had significantly worse wrist ROM and grip strength at 3 months, but no significant differences were found in subsequent follow-ups. In the combined-plating group, patients with PTP > 0 cm had significantly worse QuickDASH, wrist ROM and grip strength at 3 months. At 6 and 12 months, wrist ROM was still significantly worse. CONCLUSIONS: Measurement of PTP distance appears to be useful to identify patients likely to have worse outcome after plating of a DRF. This could be a tool to improve the allocation of hand rehabilitation resources.

Volar Locking Plate Compared With Combined Plating of AO Type C Distal Radius Fractures: A Randomized Controlled Study of 150 Cases.

PURPOSE: The optimal way to stabilize intra-articular distal radius fractures is unclear despite recent advances in surgical management. Volar plating is the most common treatment but may not be sufficient for more complex intra-articular AO type C fractures. The purpose of this randomized controlled study was to evaluate the radiographic and clinical outcomes following surgical treatment of AO type C distal radius fractures, comparing volar with combined plating. METHODS: In this study, 150 patients were randomized to volar locking plate (n = 75) or combined plating (n = 75) following a distal radius fracture AO type C. The 1-year follow-up included radiographic outcome (Batra score), visual analog scale pain score, hand grip strength, wrist range of motion, Patient-Rated Wrist Evaluation score, and Quick Disabilities of the Arm, Shoulder, and Hand score. RESULTS: Overall, 147 patients (median age 61 years) completed the 1-year follow-up (73 patients with volar plate and 74 with combined plating). No difference was found in radiographic outcome between the treatment groups. The volar plate group had significantly better Patient-Rated Wrist Evaluation scores, Quick Disabilities of the Arm, Shoulder, and Hand scores, hand grip strength, visual analog scale scores during activity, and flexion, extension, ulnar and radial deviation than the combined plate group. Hardware removal was performed in 10% in the volar plate group and in 31% in the combined plate group. There was no postoperative infection in the volar plate group but 3 cases in the combined plate group. CONCLUSIONS: In patients with complex AO type C intra-articular fractures, volar and combined plating yielded the same radiographic result. The differences in Patient-Rated Wrist Evaluation and Quick Disabilities of the Arm, Shoulder, and Hand scores between the groups did not reach the thresholds for minimal clinically important differences, suggesting similar clinical outcome. The combined plating group had a considerably higher frequency of hardware removal and postoperative infections. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic I.

Posttraumatic Arthritis After Combined Plating of Distal Radius Fractures AO Type C: A 7-Year Follow-up of 97 Cases.

BACKGROUND: Volar locking plate fixation is the most common method of operative fixation of distal radius fractures (DRFs). For more complex cases, combined plating is an option for stabilizing intra-articular fragments. The prevalence of posttraumatic arthritis (PA) after an intra-articular DRF, and its relation to patient-reported outcome measures (PROMs), remains unclear. The purpose of this study was to study the prevalence of PA and its correlation to clinical outcome measures. METHODS: We evaluated 97 consecutive patients with intra-articular DRF, operated with combined plating, 7 years postoperatively. The primary outcome measure was the prevalence of radiographic PA. Secondary outcome measures included visual analog scale (VAS) pain score, hand grip strength, wrist range of motion (ROM), Patient-Rated Wrist Evaluation (PRWE) score, and Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH) score. Radiographic examination was performed between 1 and 7 years postoperatively. RESULTS: The prevalence of PA was 29% at the 7-year follow-up. No correlation was found between PA and ROM, hand grip strength, PRWE, QuickDASH, VAS pain scores, or radiographic reduction. Median wrist ROM and grip strength were significantly inferior compared with the uninjured side. Hardware removal was performed in 51.5% of cases. There were 2 cases of tendon ruptures. CONCLUSIONS: Combined plating can yield a good clinical outcome 7 years postoperatively and a low prevalence of PA. The presence of PA did not correlate to clinical outcome measures or to the accuracy of anatomical reduction 1 year postoperatively. The frequency of tendon ruptures was acceptable, but the high frequency of hardware removal is a concern.

Combined Plating of Intra-Articular Distal Radius Fractures, a Consecutive Series of 74 Cases.

Background The distal radius fracture (DRF) is the most common fracture in adults. For unstable intra-articular fractures, the choice of treatment is often operative. The optimal choice of fixation remains a matter of discussion. Question/Purpose Can combined volar and dorsal plating, using a dorsal frame plate, achieve a good functional and radiographic 1-year outcome in intra-articular DRFs? Methods In a retrospective cohort study, we evaluated 74 consecutive patients operated with combined plating using a volar plate and a dorsal frame plate. The DRFs were operated between 2016 and 2017 and all cases were AO type C intra-articular fractures. The primary outcome was patient-reported outcome measures including radiographic examination 1 year postoperatively. Secondary outcome measures included wrist range of motion, visual analog scale (VAS) pain scores, and hand grip strength. Results The median patient-rated wrist evaluation score was 18 points; the quick disabilities of the arm, shoulder, and hand score was 14.8 points. The median Batra radiographic score was 88. Wrist extension was 76% of the uninjured side, flexion was 74%, pronation was 94%, and supination was 94%. VAS pain scores were 0 at rest and 2 during activity. Hand grip strength was 82% compared with the uninjured side. The radiographic outcome according to Batra did not correspond to the patient-reported outcome. Patients older than 60 years had significantly better QuickDASH (quick disabilities of the arm, shoulder, and hand) and PRWE scores (patient-rated wrist evaluation scores) and less pain during activity compared with younger patients despite similar radiographic outcome. There were no tendon ruptures; hardware removal was performed in 21 of the 74 patients. Conclusion The radiographic outcome did not correspond to the functional outcome 1 year postoperatively. Older patients report less pain and better functional outcome compared with younger patients. There were no tendon ruptures and the frequency of hardware removal was acceptable. Complex intra-articular DRFs AO type C can be managed with volar and dorsal frame-plate fixation to restore distal radius anatomy and achieve a good functional outcome.

Measurement of transplanted pancreatic volume using computed tomography: reliability by intra- and inter-observer variability.

BACKGROUND: Unlike other solid organ transplants, pancreas allografts can undergo a substantial decrease in baseline volume after transplantation. This phenomenon has not been well characterized, as there are insufficient data on reliable and reproducible volume assessments. We hypothesized that characterization of pancreatic volume by means of computed tomography (CT) could be a useful method for clinical follow-up in pancreas transplant patients. PURPOSE: To evaluate the feasibility and reliability of pancreatic volume assessment using CT scan in transplanted patients. MATERIAL AND METHODS: CT examinations were performed on 21 consecutive patients undergoing pancreas transplantation. Volume measurements were carried out by two observers tracing the pancreatic contours in all slices. The observers performed the measurements twice for each patient. Differences in volume measurement were used to evaluate intra- and inter-observer variability. RESULTS: The intra-observer variability for the pancreatic volume measurements of Observers 1 and 2 was found to be in almost perfect agreement, with an intraclass correlation coefficient (ICC) of 0.90 (0.77-0.96) and 0.99 (0.98-1.0), respectively. Regarding inter-observer validity, the ICCs for the first and second measurements were 0.90 (range, 0.77-0.96) and 0.95 (range, 0.85-0.98), respectively. CONCLUSION: CT volumetry is a reliable and reproducible method for measurement of transplanted pancreatic volume.