Recycling of wheat gluten wastewater: Recovery of arabinoxylan and application of its film in cherry and strawberry preservation.

This study investigated the effect of an edible water-extractable arabinoxylan (WEAX) coating on the postharvest preservation of strawberries and cherries. The WEAX film was prepared using carboxymethyl chitosan (CMCS) film as a control, with thorough characterization of its film properties. Subsequently, strawberry and cherry fruits were submerged in a solution containing edible film-forming materials and left to be stored at room temperature, followed by the analysis of their physicochemical parameters to assess their preservation efficacy. The results show that the WEAX film exhibited enhanced flexibility, superior water vapor permeability, thermal stability, and surface morphology. Furthermore, the implementation of WEAX film effectively mitigated weight loss, decay, color degradation, softening process, ascorbic acid decline, anthocyanin accumulation, and an increase in malondialdehyde content in fruits. Thus, the incorporation of WEAX coating demonstrates its capability in prolonging the shelf life of fruits post-harvest, underscoring its potential in fruit preservation practices.

Effects of Ultrasonic Treatment on Physical Stability of Lily Juice: Rheological Behavior, Particle Size, and Microstructure.

The aim of this study was to investigate the rheological properties, particle size distribution, color change, and stability of lily juice under different ultrasonic treatment conditions (152 W, 304 W, 456 W, 608 W, and 760 W). The results showed that the lily juice exhibited non-Newtonian shear thinning behavior, and the viscosity decreased with the increase in ultrasonic power. Under ultrasonic treatment conditions, there was no significant change in the pH value and zeta potential value of the samples. The content of cloudy value and total soluble solids (TSS) increased gradually. However, both the sedimentation components and centrifugal sedimentation rate showed a downward trend and an asymptotic behavior. In addition, high-power ultrasound changed the color index (L* value decreased, a* value increased), tissue structure, and particle distribution of the sample, and small particles increased significantly. To sum up, ultrasonic treatment has great potential in improving the physical properties and suspension stability of lily juice.

Study of the structural characterization, physicochemical properties and antioxidant activities of phosphorylated long-chain inulin with different degrees of substitution.

In this study, phosphorylated derivatives of long-chain inulin with different substitution degrees were prepared. The synthesized samples were named PFXL-1, PFXL-2, PFXL-3, and PFXL-4 according to their degree of substitution (from low to high). The structures of FXL and PFXL were characterized by infrared spectroscopy and nuclear magnetic resonance spectroscopy, and the results indicated the successful introduction of phosphate groups. FXL and PFXL were composed of two types of sugar, fructose and glucose, with a molar ratio of 0.977:0.023. The SEM results showed that phosphorylation changed the morphology of FXL from an irregular mass to small spherical aggregates. The XRD pattern showed that the crystallinity was reduced by the introduction of phosphate groups. The Mw of FXL was 2649 g/mol, and the Mw of PFXL-4 increased the most (2965 g/mol). Additionally, PFXL was more stable and uniform, and the absolute value of the PFXL potential reached 7.83 mV. Phosphorylation decreased the weight loss rate of FXL and improved the viscoelastic properties and antioxidant activity of FXL. This study presents a method for the modification of FXL, demonstrating that phosphorylation can enhance its physicochemical properties and physiological activity and suggesting its potential as a functional food and quality modifier.

Pickering emulsion with high freeze-thaw stability stabilized by xanthan gum/lysozyme nanoparticles and konjac glucomannan.

In this study, freeze-thaw cycle experiments were conducted on food-grade Pickering emulsions co-stabilized with konjac glucomannan (KGM) and xanthan gum/lysozyme nanoparticles (XG/Ly NPs). The rheological properties, particle size, flocculation degree (FD), coalescence degree (CD), centrifugal stability, Differential scanning calorimetry (DSC), X-ray diffraction (XRD) and microstructure of Pickering emulsion stabilized by KGM before and after freeze-thaw were characterized. It was found that as the concentration of KGM increased, the flocculation degree (FD) and coalescence degree (CD) of the emulsion decreased after the freeze-thaw cycle compared to the control sample, and the microscopic images showed that the droplets became smaller and less affected by the freeze-thaw cycles. The rheological and water-holding properties also confirmed that the KGM-added emulsions still had a strong gel network structure and prevented the separation of the continuous and dispersed phases of the droplets after freezing and thawing. Freeze-thaw treatments had a negative effect on the stable emulsion of XG/Ly NPs, while the addition of KGM improved the freeze-thaw stability of the emulsion, which provided a theoretical basis for the development of emulsion products with high freeze-thaw stability.

Rheological and physicochemical properties of heat-induced ovalbumin gels in presence of sodium carboxymethyl cellulose.

In this study, the effect of sodium carboxymethylcellulose (CMC-Na) on the rheological and physicochemical properties of heat-induced ovalbumin (OVA) gels was evaluated. The OVA/CMC-Na composite gels were prepared by heat-induced (85 °C, pH 7.0) a mixture of CMC-Na (0, 0.2, 0.4, 0.8 and 1%) and OVA. The results revealed that the addition of CMC-Na dramatically reduced the springiness and hardness of the composite gels, while slightly enhancing the intermolecular hydrogen bonding interactions, which facilitated the improvement of the softness of the gels. It can be observed by SEM that the added CMC-Na was stacked on the surface of the OVA, resulting in visible "linear bumps". All gel samples exhibited shear-thinning behavior. The apparent viscosity of the composite gels increased with the addition of CMC-Na, and the OVA gel with 1% CMC-Na showed the highest apparent viscosity and the lowest storage modulus (G'). Additionally, low field nuclear magnetic resonance (LF-NMR) measurements indicated that the increasing CMC-Na boosted the water mobility of the composite gel. This study offers a novel approach to the development of ovalbumin-based soft gel foods, especially for certain populations with swallowing difficulties.

Construction of astaxanthin loaded Pickering emulsions gel stabilized by xanthan gum/lysozyme nanoparticles with konjac glucomannan from structure, protection and gastrointestinal digestion perspective.

Pickering emulsion gels have demonstrated their efficacy in delivering bioactive compounds by effectively preventing droplet aggregation, Ostwald maturation, and phase separation through gel network. Astaxanthin (AST) Pickering emulsion gels stabilized by xanthan gum/lysozyme nanoparticles (XG/Ly NPs) and konjac glucomannan (KGM) were studied from rheological tests and textural analysis. The Pickering emulsion gel demonstrated the highest water holding capacity (WHC) at concentration of 2 % XG/Ly NPs, 60 % oil phase fraction, and 0.5 % KGM concentration. The presence of KGM was observed to enhance the plasticity of Pickering emulsion gels, as evidenced by the dense gel network structure formed on the surface of the droplets. Furthermore, the utilization of Pickering emulsion gels containing AST has demonstrated enhanced photostability and a protective effect on AST, as evidenced by antioxidant experiments. Moreover, the incorporation of KGM in Pickering emulsion gels has been found to reduce the release of free fatty acids (FFA) and the bioaccessibility of AST, as indicated in vitro digestion results. Overall, these findings indicate the potential of KGM-based Pickering emulsion gels as effective vehicles for the delivery of hydrophobic bioactive compounds within the food industry.

Effect of Arabinoxylan from Wastewater Generated during Vital Wheat Gluten Production on Liver Metabolism in Type 2 Diabetic Mice.

Arabinoxylan (AX) is a dietary fiber that has been proven to have a significant antidiabetic effect. Liver metabolic disorders frequently coincide with the development of type 2 diabetes, but research on the hepatoprotective effects of AX in type 2 diabetic mice is lacking. As AX is abundant in the wastewater produced during vital wheat gluten protein production, this study used it as a raw material to evaluate its protective effect on liver function. The study employed an AX intervention in type 2 diabetic mice induced by a high-fat diet combined with streptozotocin and collected serum and liver tissue samples after 4 weeks. Serum and liver function indicators were measured using an automatic biochemistry analysis apparatus, and liver fat accumulation was observed using oil red O staining. Nontargeted metabolomics analysis of liver tissues was conducted using UHPLC-MS/MS. The results showed that AX significantly improved liver function indicators and histopathological damage, and regulated liver metabolic disorders by improving the differential metabolites of pantothenate and CoA biosynthesis, as well as purine metabolism. This study demonstrated that AX may exert a significant hepatoprotective effect by regulating metabolic disorders.

Antibiofilm effects of punicalagin against Staphylococcus aureus in vitro.

Staphylococcus aureus is a common foodborne pathogen which can form biofilms to help them resist to antimicrobials. It brings great harm to human health. Punicalagin has good antimicrobial activities against S. aureus, but its effect on biofilm formation has not been clearly illustrated. The aim of this study was to explore the antibiofilm effects of punicalagin against S. aureus. Results showed that punicalagin did not significantly interfere with the growth of S. aureus at the concentrations of 1/64 MIC to 1/16 MIC. The biomass and metabolic activity of biofilms were significantly reduced when exposed to sub-inhibitory concentrations of punicalagin. The number of viable cells in the biofilms was also decreased after punicalagin treatment. Scanning electron microscopy and confocal laser scanning microscopy images confirmed that punicalagin damaged the structure of biofilms. The antibiofilm mechanism was partly due to the modification of the cell surface which led to the reduction of cell surface hydrophobicity. These findings suggest that punicalagin has the potential to be developed as an alternative to control S. aureus biofilms.

Insight into the interaction between tannin acid and bovine serum albumin from a spectroscopic and molecular docking perspective.

In this study, the interaction mechanism of bovine serum albumin (BSA) with tannic acid (TA) was investigated by spectroscopic and computational approaches and further validated using circular dichroism (CD), differential scanning calorimetry (DSC) and molecular docking techniques. The fluorescence spectra showed that TA bound to BSA and underwent static quenching at a single binding site, which was consistent with the molecular docking results. And the fluorescence quenching of BSA by TA was dose-dependent. Thermodynamic analysis indicated that hydrophobic forces dominated the interaction of BSA with TA. The results of circular dichroism showed that the secondary structure of BSA was slightly changed after coupling with TA. Differential scanning calorimetry showed that the interaction between BSA and TA improved the stability of the BSA-TA complex, and the melting temperature increased to 86.67 °C and the enthalpy increased to 264.1 J g-1 when the ratio of TA to BSA was 1.2 : 1. Molecular docking techniques revealed specific amino acid binding sites for the BSA-TA complex with a docking energy of -12.9 kcal mol-1, which means the TA is non-covalently bound to the BSA active site.

Reversibility of freeze-thaw/re-emulsification on Pickering emulsion stabilized with gliadin/sodium caseinate nanoparticles and konjac glucomannan.

The reversibility of freeze-thaw/re-emulsification of Pickering emulsion stabilized by gliadin/sodium caseinate nanoparticles (Gli/CAS NPs) was improved by adding konjac glucomannan (KGM). With the increase in the KGM concentration, the delamination of emulsions after freeze-thaw treatment was significantly improved. The microstructure showed that the presence of KGM helped to maintain the network structure of continuous phases. In particular, the particle size of the emulsion did not increase significantly after three freeze-thaw cycles when the KGM concentration was 0.6 % and the oil phase fraction was 60 %. The results of flocculation degree and coalescence degree also indicated that KGM promoted the cross-linking between particles on the surface of the droplet and increased the thickness of the interfacial film of the droplet. Rheological analysis also proved the same result: the elastic modulus of the emulsion was still larger than the viscous modulus, which showed the ideal freeze thaw reversibility. After adding KGM, the emulsion formed a strong network structure with good stability for long-term storage and reversibility for freeze-thaw cycling/re-emulsification. Thus, the emulsion has broad application prospects in food, cosmetics, and pharmaceutical fields.

Pickering emulsions synergistic stabilized with konjac glucomannan and xanthan gum/lysozyme nanoparticles: Structure, protection and gastrointestinal digestion.

The effect of konjac glucomannan (KGM) on the stability and digestion characteristics of xanthan gum/lysozyme nanoparticles (XG/Ly NPs) stabilized Pickering emulsions was investigated. Results indicated that the high viscosity of KGM prompted the particles to be adsorbed toward the interface, which decreased the particle size and increased the stability of emulsions. As the concentration of KGM increased, the G' and G″ of emulsions became larger and approached a "solid-like" state. When the KGM concentration was ≥0.2 %, the large amplitude sweeps of the emulsion exhibited a "weak strain overshoot". The network structure formed by KGM molecular chain and particles was intertwined around the droplets to form a polysaccharide layer and fibrous network structure. Emulsions containing KGM showed a "spider web" epidermal network pattern. It was found by illumination for 4 h that samples with 0.2 % KGM concentration increased the retention of ß-carotene by 18.74 %. KGM decreased the release rate of fatty acids and bioaccessibility by hindering bile salt and lipase adsorption.

Antibiofilm Effects of Oleuropein against Staphylococcus aureus: An In Vitro Study.

Staphylococcus aureus has posed a huge threat to human health and the economy. Oleuropein has antibacterial activities against various microorganisms but research on its effect on the S. aureus biofilm is limited. This research aimed to estimate the antibiofilm activities of oleuropein against S. aureus. The results suggest that the minimum inhibitory concentration of oleuropein against S. aureus ATCC 25923 was 3 mg/mL. The biomass of biofilms formed on the microplates and coverslips and the viability of bacteria were significantly reduced after the treatment with oleuropein. The scanning electron microscopy observation results indicated that the stacking thickness and density of the biofilm decreased when S. aureus was exposed to oleuropein. It had a bactericidal effect on biofilm bacteria and removed polysaccharides and proteins from mature biofilms. The effects of oleuropein on the biofilm could be explained by a reduction in bacterial secretion of extracellular polymeric substances and a change in bacterial surface hydrophobicity. Based on the above findings, oleuropein has the potential to be used against food pollution caused by S. aureus biofilms.

Carrageenan-Based Pickering Emulsion Gels Stabilized by Xanthan Gum/Lysozyme Nanoparticle: Microstructure, Rheological, and Texture Perspective.

In this study, Pickering emulsion gels were prepared by the self-gel method based on kappa carrageenan (kC). The effects of particle stabilizers and polysaccharide concentrations on the microstructure, rheological characteristics, and texture of Pickering emulsion gels stabilized by xanthan gum/lysozyme nanoparticles (XG/Ly NPs) with kC were discussed. The viscoelasticity of Pickering emulsion gels increased significantly with the increase of kC and XG/Ly NPs. The results of temperature sweep showed that the gel formation mainly depended on the kC addition. The XG/Ly NPs addition could accelerate the formation of Pickering emulsion gels and increase its melting temperature (Tmelt), which is helpful to improve the thermal stability of emulsion gels. Cryo-scanning electron microscope (Cryo-SEM) images revealed that Pickering emulsion gel has a porous network structure, and the oil droplets were well wrapped in the pores. The hardness increased significantly with the increase of XG/Ly NPs and kC. In particular, the Pickering emulsion gel hardness was up to 2.9 Newton (N) when the concentration of kC and XG/Ly NPs were 2%. The results showed that self-gelling polysaccharides, such as kC, could construct and regulate the structure and characteristics of Pickering emulsion gel. This study provides theoretical support for potential new applications of emulsion gels as functional colloids and delivery systems in the food industry.

Characterization and antibacterial behavior of an edible konjac glucomannan/soluble black tea powder hybrid film with ultraviolet absorption.

In this study, a KGM/SBTP film was prepared by a blending method using KGM and a soluble black tea film (SBTP) as substrates, and its hygroscopicity, thermal properties, light barrier properties, microstructure, and bacteriostatic properties were evaluated. The results confirmed that compared with the control group, with the increase in the SBTP content, the transmittance of the film in the ultraviolet region significantly reduced, and the water barrier property and thermal stability were improved. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) results indicated that the tea polyphenols interacted with the film substrate. SEM also showed that the structure of the KGM/SBTP films was smooth and flat, and all samples showed no fracture. In addition, the KGM/SBTP mixed membrane had obvious concentration-dependent antibacterial activity. When the concentration of SBTP was 0.9%, the inhibition zones against Staphylococcus aureus and Escherichia coli were 12.30 ± 0.20 mm and 12.05 ± 0.47 mm, respectively.

Chestnut Lily Beverage (CLB) Processing Using Ultrasound-Assisted Nisin: Microbiota Inactivation and Product Quality.

We evaluated the effects of ultrasound (US) and ultrasound combined with nisin (NUS) treatments on the properties of chestnut lily beverages (CLB) using conventional thermal pasteurisation (TP) as a control. After CLB samples were treated with US and NUS for 20, 40, or 60 min, the polyphenol oxidase activity (PPO), microbial inactivation effect, colour, pH value, total phenolic content, and antioxidant capacity of the CLB were observed. It was found that the inactivation rate of PPO in CLB after NUS treatment was higher than that in the US, indicating that NUS treatment aggravated PPO inactivation. Treatment time was important in the inactivation of microorganisms by US and NUS; NUS had a lethal synergistic lethal effect on microorganisms in CLB and when compared with US, NUS reduced changes in the CLB colour value. Notably, the total phenolic content and antioxidant capacity of the US- and NUS-treated CLB significantly increased relative to the TP group. These results that suggest NUS has a potential application value in the development of CLB because it reduces the risk of microorganism contamination and helps improve the quality of CLB. This study provides technical support and a theoretical basis for the improved production of CLB.

Antimicrobial behavior and mechanism of clove oil nanoemulsion.

Clove oil has many functions such as antibacterial, anti-inflammatory, anti-oxidation. In this experiment, a self-emulsification method was used to prepare clove oil nanoemulsion. And then filter paper diffusion method, minimum inhibitory concentration, and minimum bactericidal concentration were used to study the inhibitory behavior of clove oil nanoemulsion on Escherichia coli and Staphylococcus aureus. And explore the antibacterial mechanism by dynamically testing the content of nucleic acid and protein in the culture solution during the antibacterial process. The results show that when the surfactant content is 10 wt%, the hydrophile-lipophile balance (HLB) is 13.93, and the oil phase content is 2 wt%, a clove oil nanoemulsion with better dispersion and smaller average particle size can be prepared. The minimum inhibitory concentration (MIC) of clove oil nanoemulsion against Escherichia coli and Staphylococcus aureus is 0.5, 0.25 mg/mL, and the minimum bactericidal concentration (MBC) is 1, 2 mg/mL. The increase in protein content and the exponential growth of nucleic acid release also indicated that the clove oil nanoemulsion destroys the integrity of the cell membrane. The experimental results can provide a reference for the application of clove oil nanoemulsion in food, medicine and other fields.

Structural characterization and antibacterial properties of konjac glucomannan/soluble green tea powder blend films for food packaging.

Antimicrobial activity is a promising property for food packaging which could prolong the shelf life of food products. In this paper, the physicochemical and antimicrobial properties of konjac glucomannan (KGM)/soluble green tea powder (SGTP) edible films were firstly prepared and analyzed through light barrier properties, Fourier transform infrared spectroscopy (FT-IR), tensile strength (TS), X-ray diffraction (XRD), thermogravimetric analysis and scanning electron microscope (SEM). The results showed that appropriate addition of SGTP could improve the TS of composite films. With the increase of SGTP content, the transmittance of the films in the ultraviolet region decreased obviously, and the thermal stability was improved in a SGTP dependent manner. KGM/SGTP films present a fairly smooth and flat surface without any fracture when 0.5% SGTP was provided. The bacteriostatic test showed that the bacteriostatic performance of the composite films against Staphylococcus aureus and Escherichia coli was also significantly enhanced. When 1% SGTP was provided, the zones of inhibition for Escherichia coli and Staphyloccocus aureus reached to 13.45 ± 0.94 mm and 13.76 ± 0.92 mm, respectively. Overall, the KGM/SGTP films showed great potential as bioactive packaging materials to extend food shelf life.

Comparative study of the effects of ultrasonic power on the structure and functional properties of gliadin in wheat and green wheat.

The impact of different ultrasonic power on the structure and functional properties of wheat gliadin (WG) and green wheat gliadin (GG) was investigated and compared. Ultrasound had no obvious effect on subunit composition and bands of WG and GG, and there were more small molecular weight bands in GG. The results of Fourier transform-infrared spectroscopy, intrinsic fluorescence spectroscopy, and scanning electron microscopy analyses demonstrated that ultrasonic treatment had a significant effect on the structure of WG and GG, inducing the transformation from order structure to disorder structure. The dispersion and uniformity were better at 400 and 300 W, respectively. Under proper ultrasonic treatment, the particle size of WG and GG was significantly reduced, and the free sulfhydryl groups and surface hydrophobicity were significantly increased (p < 0.05). Furthermore, the functional properties of WG and GG such as solubility, emulsification properties, water holding and oil holding properties, thermal stability, and digestibility were enhanced. The better functional properties of WG and GG were obtained at 400 and 300 W, respectively. These results indicated that ultrasonic treatment with appropriate power was a valuable method for improving functional characteristics of WG and GG. PRACTICAL APPLICATION: Ultrasonic treatment could cause structural changes of wheat gliadin (WG) and green wheat gliadin (GG), and their functional properties are improved under appropriate power. This study compares the effects of ultrasound on WG and GG, and the results will provide theoretical guidance for the development of GG in the food industry.

Physical Stability of Chestnut Lily Beverages (CLB): Effects of Shear Homogenization on Beverage Rheological Behavior, Particle Size, and Sensory Properties.

The processing parameters have a crucial influence on the stability and sensory quality of beverages. The focus of this study is to observe the rheological behavior, particle size distribution, stability, color change, and sensory evaluation of chestnut lily beverages (CLB) at different rotational speeds (0~20,000 rpm) using a high-shear homogeneous disperser. The CLB system exhibited non-Newtonian shear-thinning behavior. As the homogenization speed increased (0~12,000 rpm), the viscosity increased (0.002~0.059 Pa.s). However, when the rotational speed shear continued to increase (12,000~20,000 rpm), the viscosity decreased slightly (0.035~0.027 Pa.s). Under all homogeneous conditions, the turbidity and precipitation fractions were the lowest when the rotational speed was 12,000 rpm: the sedimentation index was lowest at this point (2.87%), and the relative turbidity value of CLB was largest at this point (80.29%). The average beverage particle diameter and ascorbic acid content showed a downward trend at the homogenization speed from 0 to 20,000 rpm, whereas the total soluble solids (TSS) content followed the opposite trend. The results show that these physical properties can be correlated with different rotational speeds of homogenization. This study explained the effect of homogenization speed on CLB properties, which needs to be considered in beverage processing, where high-speed shear homogenization can serve as a promising technique.

High Internal-Phase Pickering Emulsions Stabilized by Xanthan Gum/Lysozyme Nanoparticles: Rheological and Microstructural Perspective.

Food-grade high internal-phase Pickering emulsions (HIPPEs) stabilized by solid or colloidal particles with different advantages have attracted extensive attention nowadays. However, looking for new appropriate particle stabilizers is the common practice for HIPPEs preparation. It is crucial to find a new strategy for the development of functional HIPPEs with controllable properties. In this study, a high concentration of xanthan gum/lysozyme nanoparticles (XG/Ly NPs) was used for the preparation of HIPPEs for the first time. Visual observations, creaming index (CI), microstructure, and rheology tests were carried out to investigate the potential of XG/Ly NPs as HIPPEs stabilizers. Results indicated that XG/Ly NPs could stabilize oil droplets in the concentration range of 0.5-4% (w/v). The HIPPEs with a minimal particle concentration of 1% exhibited remarkable physical stability. Rheological measurements showed that a high stability of solid-like HIPPEs was successfully obtained with a higher concentration of XG/Ly NPs. Overall, the HIPPEs stabilized by different concentrations of XG/Ly NPs exhibited excellent rheological and structural properties, which might provide a feasible strategy for the development of functional emulsion systems with controllable structures.