Self-Reconstruction of Highly Degraded LiNi0.8 Co0.1 Mn0.1 O2 toward Stable Single-Crystalline Cathode.

The ever-growing demand for resources sustainability has promoted the recycle of spent lithium-ion batteries to a strategic position. Direct recycle outperforms either hydrometallurgical or pyrometallurgical approaches due to the high added value and facile treatment processes. However, the traditional direct recycling technologies are only applicable for Ni-poor/middle cathodes. Herein, spent Ni-rich LiNi0.8 Co0.1 Mn0.1 O2 (S-NCM) to performance-enhanced single-crystalline cathode materials is directly recycled using a simple but effective LiOH-NaCl molten salt. The evolution process of the Li-supplement and grain-recrystallization during regeneration is systematically investigated, and the successful recovery of the highly degraded microstructure is comprehensively proven, including significant elimination of Ni2+ and O vacancies. Beneficial from the favorable reconstructed single-crystalline particles, the regenerated NCM (R-NCM) represents remarkably enhanced structural stability, electrochemical activity, O2 and cracks suppression during charge/discharge, thus achieving the excellent performances in long-term cycling and high-rate tests. As a result, R-NCM maintains the 86.5% reversible capacity at 1 C after 200 cycles. Instructively, the present molten salt can be successfully applied for recycling spent NCMs with various Li and Ni compositions (e.g., LiNi0.5 Co0.2 Mn0.3 O2 ).

Tungsten Nitride/Tungsten Oxide Nanosheets for Enhanced Oxynitride Intermediate Adsorption and Hydrogenation in Nitrate Electroreduction to Ammonia.

Electrochemical NO3- reduction reaction (NO3RR) is a promising technique for green NH3 synthesis. Tungsten oxide (WO3) has been regarded as an effective electrocatalyst for electrochemical NH3 synthesis. However, the weak adsorption and the sluggish hydrogenation of oxynitride intermediates (NOx, e.g., *NO3 and *NO2) over WO3 materials hinder the efficiency of converting NO3- to NH3. Herein, we design a heterostructure of tungsten nitride (WN) and WO3 (WN/WO3) nanosheets to optimize *NO3 and *NO2 adsorptions and facilitate *NO2 hydrogenations to achieve a highly efficient electrochemical NO3RR to produce NH3. Theoretical calculations predict that locally introducing WN into WO3 will shorten the distance between adjacent W atoms, resulting in *NO3 and *NO2 being strongly adsorbed on W active sites in the form of bidentate ligands instead of the relatively weak monodentate ligands. Furthermore, WN facilitates H2O dissociation to supply the requisite protons, which is beneficial for *NO2 hydrogenations. Inspired by theoretical prediction, WN/WO3 nanosheets are successfully fabricated through a high-temperature nitridation process. The transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption near-edge spectroscopy investigations confirm that the amorphous WN has been locally introduced in situ into WO3 nanosheets to form a composite heterostructure. The as-prepared WN/WO3 nanosheets exhibit a high Faraday efficiency of 88.9 ± 7.2% and an appreciable yield rate of 8.4 mg h-1 cm-2 toward NH3 production, which is much higher than that of individual WO3 and WN. The enhanced adsorption and hydrogenation behaviors of *NOx over WN/WO3 are characterized by in situ Fourier-transform infrared spectroscopy, consistent with the theoretical predictions. This work develops facile and effective heterostructure nanomaterials to tune the adsorption and hydrogenation of NOx for boosting the efficiency from NO3- to NH3.

A Universal Molten Salt Method for Direct Upcycling of Spent Ni-rich Cathode towards Single-crystalline Li-rich Cathode.

With ever-increasing pursuit for high-value output in recycling spent lithium-ion batteries (LIBs), traditional recycling methods of cathodes tend to be obsolete because of the complicated procedures. Herein, we first upcycle spent polycrystal LiNi0.88 Co0.095 Al0.025 O2 (S-NCA) to high value-added single-crystalline and Li-rich cathode materials through a simple but feasible LiOH-Na2 SO4 eutectic molten salt strategy. The in situ X-ray diffraction technique and a series of paratactic experiments record the evolution process of upcycling and prove that excessive Li occupies the transition metal (TM) layers. Beneficial from the single-crystalline and Li-rich nature, the regenerated NCA (R-NCA) exhibits remarkably enhanced electrochemical performances in terms of long-term cyclability, high-rate performance and low polarization. This approach can also be successfully extended to other cathode materials e.g., LiNix Coy Mnz O2 (NCM) and mixed spent NCAs with varied degree of Li loss.

Synthesis of a Hexagonal Phase ZnS Photocatalyst for High CO Selectivity in CO2 Reduction Reactions.

ZnS materials exhibit very negative potential of the conduction band, which is promising in photocatalytic reduction reactions. Unfortunately, previously reported ZnS materials for photocatalysis are mainly in the cubic phase, which produce high activity for H2 evolutions and low activity toward CO2 reductions. Herein, a hexagonal phase ZnS photocatalyst is fabricated for highly efficient CO2 reduction reactions. The hexagonal ZnS nanoplates with the pure phase and well crystallization are synthesized via three-step solvothermal methods. In photocatalytic CO2 reduction reactions under an aqueous solution environment, the hexagonal ZnS produces a CO selectivity of 21%, which is distinctly higher than that of 0.2% for commonly used cubic ZnS. The energy band study suggests that hexagonal ZnS possesses a slightly more negative conduction band and wider bandgap than cubic ZnS. Theoretical calculations reveal that the hexagonal ZnS possesses increased electron density around Zn atoms as that of cubic ZnS. Furthermore, hexagonal ZnS exhibits relatively reduced absorption energy of CO2 reduction intermediates and increased absorption energy of H* as cubic ZnS, which result in better selectivity toward CO2 reduction reactions. This study offers deep insights into the synthesis and electronic structure of hexagonal ZnS for CO2 reduction reactions, which inspire the design of highly active photocatalysts for artificial photosynthesis.