Room-Temperature Phase Transition Material with Switchable Second-Order Nonlinear Optical Properties.

Phase transition materials with switchable second-order nonlinear optical (NLO) properties have attracted extensive attention because of their great application potential in photoelectric switches, sensors, and modulators, while metal-free organics with NLO switchability near room temperature remain scarce. Herein, we report a hydrogen-bonded metal-free organic crystal, 2-methylpropan-2-aminium 2,2-dimethylpropanoate (1), exhibiting a room-temperature phase transition and favorable NLO switchability. Through investigations on its thermal anomalies, dielectric properties, and crystal structures, we uncover that 1 holds a near-room-temperature phase transition at 303 K from noncentrosymmetric point group C2v to centrosymmetric one D2h, which is attributed to the order-disorder transformations of both tert-butylamine cations and dimethylpropionic acid anions. Accompanied by symmetry change during the phase transition, 1 exhibits reversible and repeatable NLO "on-off" switchability with a desirable switching contrast ratio of ca. 19 between high and low NLO states. This discovery demonstrates a metal-free organic crystal with NLO switching behavior near room temperature, serving as a promising candidate in smart and ecofriendly photoelectric functional materials and devices.

Association between dietary inflammatory index and gallstones in US adults.

Introduction: Previous studies have found that diet's inflammatory potential is related to various diseases. However, little is known about its relationship with gallstones. The present study aims to investigate the relationship between dietary inflammatory index (DII) and gallstones. Methods: Data were obtained from the 2003-2020 National Health and Nutrition Examination Survey (NHANES). We used the nearest neighbor propensity score matching (PSM) with a ratio of 1:1 to reduce selection bias. Logistic regression models estimated the association between DII and gallstones. The non-linear relationship was explored with restricted cubic splines (RCS). BMI subgroup stratification was performed to explore further the connection between DII and gallstones in different populations. Results: 10,779 participants were included. Before and after PSM, gallstone group individuals had higher DII scores than non-gallstone group individuals (p < 0.05). Matched logistic regression analysis showed that DII scores were positively correlated with gallstone risk (adjusted OR = 1.14, 95% CI 1.01, 1.29). The stratified analysis showed that this association was stronger in overweight or obese people (adjusted OR = 1.18, 95% CI 1.03, 1.34). RCS analysis suggested that DII and gallstones showed a "J"-shaped non-linear dose-response relationship (p non-linear <0.001). Conclusion: Higher DII score is positively associated with the risk of gallstones, particularly in overweight or obese population, and this relationship is a "J"-shaped non-linear relationship. These results further support that avoiding or reducing a pro-inflammatory diet can be an intervention strategy for gallstone management, particularly in the overweight or obese population.

Mechanistic Insights into the Bacterial Luciferase-based Bioluminescence Resonance Energy Transfer Luminescence: The Role of Protein Complex Dimer.

Bacterial bioluminescence holds significant potential in the realm of optical imaging due to the inherent advantages of bioluminescence and ease of operation. However, its practical utility is hindered by its low light intensity. The fusion of bacterial luciferase with a highly fluorescent protein has been demonstrated to significantly enhance autonomous luminescence. Nevertheless, the underlying mechanism behind this enhancement remains unclear, and there is a dearth of research investigating the mechanistic aspects of bioluminescence resonance energy transfer (BRET) luminescence, whether it occurs naturally or can be achieved through experimental means. In this study, we investigated the phenomenon of bacterial luciferase-based BRET luminescence employing a range of computational techniques, including structural modeling, molecular docking, molecular dynamics simulations, as well as combined quantum mechanics and molecular mechanics calculations. The theoretical findings suggest that the BRET luminescence occurs through resonance energy transfer between the excited bioluminophore and the ground chromophore within the protein complex dimer. The proposed mechanism of the protein complex dimer offers a microscopic understanding of the intriguing BRET phenomenon and has the potential to inspire further practical applications in the field of optical imaging.

A Sn-Based Hybrid Ferroelastic Semiconductor with High-Temperature Dielectric Switching.

Organic-inorganic halide hybrids have been extensively developed and used in optoelectronic devices because of their superior performance such as ease of assembly, flexible structural tunability, and excellent optoelectronic properties. Ferroelastic strain might be used to modulate and control photoelectric properties such as photovoltaic voltage, while organic-inorganic hybrid ferroelastic semiconductors remain relatively unexplored. Herein, we successfully design a new Sn-base, lead-free hybrid ferroelastic semiconductor, [TPMA]2[SnCl6] (TPMA = benzyl trimethylammonium). It undergoes a high-temperature -3mF-1-type ferroelastic phase transition at 408 K, and intriguingly, its ferroelastic domains can be simultaneously switched under the stimulation of external heat and stress. The ferroelastic phase transition might be derived from the order-disorder transition of organic cations during heating and cooling. Moreover, [TPMA]2[SnCl6] also demonstrates a high-temperature dielectric switching property around 408 K, which has good stability and reproducibility. With those benefits, [TPMA]2[SnCl6] shows great potential in applications such as energy storage devices, optoelectronic devices, shape memory, intelligent switches, and so on.

Thorough Understanding of Bioluminophore Production in Bacterial Bioluminescence.

Bioluminophore of bioluminescence (BL) comes from the decomposition of peroxide, which is an intermediate produced in the complicated chemical reactions of BL. The peroxide is a dioxetanone in most BL cases and an endoperoxide in fungal BL. The decomposition mechanisms of these two types of peroxides have been exclusively studied. However, the peroxide is a linear organic peroxide in bacterial BL, whose decomposition explanations are quite controversial, and seven mechanisms have been proposed. To thoroughly understand the mechanism of bioluminophore production in bacterial BL, this paper systematically discusses the seven proposed mechanisms via the present computational results and previous experimental and theoretical results. Our research results indicate that the bioluminophore in bacterial BL is produced through the charge-transfer initiated luminescence (CTIL) mechanism. The decomposition mechanism of linear organic peroxide was compared with the decomposition mechanisms of the other two types of peroxides, dioxetanone and endoperoxide. This study is also helpful in understanding the bioluminophore production in other BLs via the decomposition of an organic peroxide, such as dinoflagellate BL.

Quantitative assessment of left ventricular systolic function in patients with systemic lupus erythematosus: a non-invasive pressure-strain loop technique.

Background: Systemic lupus erythematosus (SLE) is associated with a variety of cardiovascular diseases, even in the early stage of disease development. The purpose of this study was to quantitatively evaluate left ventricular (LV) systolic function in patients with SLE using a novel non-invasive pressure-strain loop (PSL) technique. Methods: This prospective case-control study included 132 patients with SLE and 99 normal controls, all of whom underwent traditional transthoracic echocardiography. The LV myocardial work was evaluated with the PSL technique based on speckle tracking and brachial artery blood pressure. The differences among groups were compared, and the correlations between myocardial work, laboratory data, and disease activity were analyzed in the SLE group. Results: Compared with the normal group, SLE patients had significantly higher global wasted work {GWW; SLE: 109 [82-150] mmHg%; controls: 66 [45-109] mmHg%; P<0.001} and impaired global work efficiency [GWE; SLE: 95% (94-97%); controls: 97% (96-98%); P<0.001]. Global work index (GWI) and global constructive work (GCW) did not show significant differences (P>0.05). Further subdivision analysis found that the increase of GWW and the damage of GWE were more obvious in SLE patients with high disease activity or severe diastolic dysfunction. Multivariate analysis revealed that increased erythrocyte sedimentation rate (ESR), C-reactive protein (CRP), anti-phospholipid antibodies, peak strain dispersion, and SLE Disease Activity Index (SLEDAI) were independently associated with increased GWW (ß=0.189, 0.230, 0.444, 0.111, and 0.180, respectively; all P<0.05) and damaged GWE (ß=-0.184, -0.130, -0.468, -0.149, and -0.191, respectively; all P<0.05). Conclusions: The non-invasive PSL can quantitatively evaluate the LV systolic function in SLE patients. This technique may provide a new method for monitoring cardiac function in chronic diseases.

pH-sensitive carbon nanotubes graft polymethylacrylic acid self-assembly nanoplatforms for cellular drug release.

pH-Sensitive carbon nanotubes graft polymethylacrylic acid hybrids (CNTs-g-PMAA) were prepared through a three-step process, and self-assembled into core-shell micelle nanoparticles. The chemical structure of the hybrids were characterized by FTIR, 1H NMR and TGA. The critical micelle concentration (CMC) was measured by surface tension, and the value hinged on the Mn values or chain lengths of PMAA segments. The UV-vis transmittance, dynamical light scattering (DLS), and zeta potential measurements indicated that the hybrid self-assembly exhibited pH-sensentive responsiveness. The self-assembly was used to load an anticancer drug, paclitaxel (PTX), with an encapsulation efficiency of 77%. The PTX-loaded hybrid drug preparations were applied for cancer-cellular drug release, finding that the release rate was dependent on pH environments, and faster in acidic media of pH < 6.8 than in pH 7.4. MTT and hemolysis assays manifested that the blank hybrid drug carriers were nontoxic and safe, whereas the PTX-loaded drug preparations possessed comparable and even higher anticancer activity in comparison with free PTX. Consequently, the developed hybrid drug nanocarriers can be used for cancer therapy as a promising candidate.

A New Approach to Optimize SVM for Insulator State Identification Based on Improved PSO Algorithm.

The failure of insulators may seriously threaten the safe operation of the power system, where the state detection of high-voltage insulators is a must for the normal and safe operation of the power system. Based on the data of insulators in aerial images, this work explored an enhanced particle swarm algorithm to optimize the parameters of the support vector machine. A support vector machine model was therefore established for the identification of the normal and defective states of the insulators. This methodology works with the structure minimization principle of SVM and the characteristics of particle swarm fast optimization. First, the aerial insulator image was segmented as a target by way of the seed region growth based on double-layer cascade morphological improvements, and then, HOG features plus GLCM features were extracted as sample data. Finally, an ameliorated PSO-SVM classifier was designed to realize insulator state identification. Comparisons were made between PSO-SVM and conventional machine learning algorithms, SVM and Random Forest, and an optimization algorithm, Gray Wolf Optimization Support Vector Machine (GWO-SVM), and advanced neural network CNN. The experimental results showed that the performance of the algorithm proposed in this paper touched the top level, where the recognition accuracy rate was 92.11%, the precision rate 90%, the recall rate 94.74%, and the F1-score 92.31%.

Acute Cold Water-Immersion Restraint Stress Induces Intestinal Injury and Reduces the Diversity of Gut Microbiota in Mice.

Growing evidence has demonstrated that stress triggers gastrointestinal (GI) disorders. This study aimed to investigate how the acute cold water-immersion restraint (CWIR) stress affects intestinal injury and gut microbiota (GM) distribution. Male C57BL/6 mice were used to establish a CWIR animal model. Hematoxylin-eosin and periodic acid-Schiff staining were performed to assess intestinal histopathological changes. Reverse transcription quantitative polymerase chain reaction (RT-qPCR) analysis and immunofluorescence staining were used to evaluate the expression of inflammatory cytokines and immune cell infiltration in the intestinal tissues. The gut permeability and intestinal occludin protein expression were determined through fluorescein isothiocyanate-dextran detection and western blot, respectively. GM profiles were analyzed via high-throughput sequencing of the fecal bacterial 16S rRNA genes. Results showed that CWIR induced more severe intestinal mucosal injury compared to the control, leading to a significant increase in tumor necrosis factor-α expression, but no infiltration of neutrophil and T cells. CWIR also resulted in GI disruption and increased the permeability of the intestinal mucosa. GM profiles showed that CWIR reduced GM diversity of mice compared with the control group. Specifically, aerobic and gram-negative bacteria significantly increased after CWIR, which was associated with the severity of gut injury under stress. Therefore, acute CWIR leads to severe intestinal damage with inflammation and disrupts the GM homeostasis, contributing to decreased GM diversity. Our findings provide the theoretical basis for the further treatment of intestinal disorders induced by CWIR.

Evaluation of AutoLumo A2000 Chemiluminescent Immunoassay for Detection of Respiratory Syncytial Virus and Adenovirus IgM Antibodies.

BACKGROUND: Respiratory syncytial virus and adenovirus are seasonal diseases that cause an enormous burden on health systems. Previously, our lab uses DHI D3-Ultra DFA for detecting antigen of respiratory syncytial virus (RSV) and adenovirus (ADV). This article will evaluate the performance of AutoLumo RSV-IgM and ADV-IgM assays compared to D3-Ultra DFA method. METHODS: We used quality control specimens to evaluate precision, cross-reactivity specimen to evaluate the specificity, exogenous interferent: Hb (1,000 mg/dL); total bilirubin (50 mg/dL), ANA titer (1:10,000), RF (500 IU/mL) to evaluate interference, and paired, nasopharyngeal swab and sera specimens to evaluate clinical sensitivity and specificity. RESULTS: AutoLumo RSV-IgM and ADV-IgM assay show good precision and no cross-reactivity with other pathogen-specific IgM antibodies; no hook effect; exogenous interferent substance: Hb < 1,000 mg/dL; total bilirubin < 50 mg/dL, ANA titer < 1:10,000, and RF < 500 IU/mL showed no interference to RSV-IgM and ADV-IgM antibodies. The paired comparison test showed that RSV-IgM and ADV-IgM appear partly on the fifth day of the disease and peaked on days six to fourteen. CONCLUSIONS: AutoLumo RSV-IgM and ADV-IgM have good performance, but their sensitivities await further improvements.

Novel multi-stimuli responsive functionalized PEG-based co-delivery nanovehicles toward sustainable treatments of multidrug resistant tumor.

The efficacy of ongoing anticancer treatment is often compromised by some barriers, such as low drug content, nonspecific release of drug delivery system, and multidrug resistance (MDR) effect of tumors. Herein, in the research a novel functionalized PEG-based polymer cystine-(polyethylene glycol)2-b-(poly(2-methacryloyloxyethyl ferrocenecarboxylate)2) (Cys-(PEG45)2-b-(PMAOEFC)2) with multi-stimuli sensitive mechanism was constructed, in which doxorubicin (DOX) was chemical bonded through Schiff base structure to provide acid labile DOX prodrug (DOX)2-Cys-(PEG45)2-b-(PMAOEFC)2. Afterwards, paclitaxel (PTX) and its diselenide bond linked PTX dimer were encapsulated into the prodrug through physical loading, to achieve pH and triple redox responsive (DOX)2-Cys-(PEG45)2-b-(PMAOEFC)2@PTX and (DOX)2-Cys-(PEG45)2-b-(PMAOEFC)2@PTX dimer with ultrahigh drugs content. The obtained nanovehicles could self-assemble into globular micelles with good stability based on fluorescence spectra and TEM observation. Moreover, there was a remarkable "reassembly-disassembly" behavior caused by phase transition of micelles under the mimic cancerous physiological environment. DOX and PTX could be on-demand released in acid and redox stress mode, respectively. Meanwhile, in vivo anticancer studies revealed the significant tumor inhibition of nanoformulas. This work offered facile strategies to fabricate drug nanaovehicles with tunable drug content and types, it has a profound significance in overcoming MDR effect, which provided more options for sustainable cancer treatment according to the desired drug dosage and the stage of tumor growth.

Temperature and Photo Dual-Stimuli Responsive Block Copolymer Self-Assembly Micelles for Cellular Controlled Drug Release.

To well adapt to the complicated physiological environments, it is necessary to engineer dual- and/or multi-stimuli responsive drug carriers for more effective drug release. For this, a novel temperature responsive lateral chain photosensitive block copolymer, poly[(N-isopropylacrylamide-co-N,N-dimethylacrylamide) -block-propyleneacylalkyl-4-azobenzoate] (P(NIPAM-co-DMAA)-b-PAzoHPA), is synthesized by atom transfer radical polymerization. The structure is characterized by 1 H nuclear magnetic resonance spectrometry and laser light scattering gel chromatography system. The self-assembly behavior, morphology, and sizes of micelles are investigated by fluorescence spectroscopy, transmission electron microscope, and laser particle analyzer. Dual responsiveness to light and temperature is explored by ultraviolet-visible absorption spectroscopy. The results show that the copolymer micelles take on apparent light and temperature dual responsiveness, and its lower critical solution temperature (LCST) is above 37 °C, and changes with the trans-/cis- isomerization of azobenzene structure under UV irradiation. The blank copolymers are nontoxic, whereas the paclitaxel (PTX)-loaded counterparts possessed comparable anticancer activities to free PTX, with entrapment efficiency of 83.7%. The PTX release from the PTX-loaded micelles can be mediated by changing temperature and/or light stimuli. The developed block copolymers can potentially be used for cancer therapy as drug controlled release carriers.

Biotin Interference in Susceptible CanAg Ca242 Immunoassays and Elimination Method.

BACKGROUND: High-dose biotin therapy is beneficial in progressive multiple sclerosis (MS). Biotin, as dietary supplement or therapy, may lead to analytical interference in biotin-streptavidin immunoassay. METHODS: Seven concentration gradients of biotin solutions were spiked to three different levels of Ca242 serum samples. All samples were tested by CanAg Ca242 ELISA kit to evaluate the interference from biotin. Serum samples with biotin concentration at 1,000 ng/mL were retested after absorption by streptavidin microparticles or direct analysis on the Mindray CL2000i platform. RESULTS: Our study found that CanAg Ca242 is vulnerable to interference when a sample that contains biotin exceeds 15.63 ng/mL. Biotin interference can result in falsely low results in CanAg Ca242. The effect and extent of biotin interference are, to some extent, dependent on the concentration of serum Ca242 and the concentration of biotin. CONCLUSIONS: CanAg Ca242 is vulnerable to biotin interference. The laboratory can overcome biotin interference on CanAg Ca242 by using a non-biotin streptavidin method or by absorbing biotin with streptavidin-coated microparticles before testing. Clinicians should use caution in interpreting abnormal results in patients who ingest biotin.

Dual Stimuli-Responsive Supramolecular Self-Assemblies Based on the Host-Guest Interaction between ß-Cyclodextrin and Azobenzene for Cellular Drug Release.

Health has always been a hot topic of concern, whereas cancer is one of the largest security risks to human health. Although the existing drug delivery systems (DDSs) have been extensively reported and commercially applied, there are still some issues that have yet to be well-resolved, including the toxicity, side-effects, and targeted therapy efficiency of drugs. Consequently, it is still necessary to develop a novel, highly efficient, controlled and targeted DDS for cancer therapy. For this, a supramolecular polymer, ß-CD-g-PDMAEMA@Azo-PCL, was designed and developed through the host-guest inclusion complexation interactions between a host polymer, ß-cyclodextrin-graft-poly(2-(dimethylamino)ethyl methacrylate) (ß-CD-g-PDMAEMA), and a guest polymer, azobenzene modified poly(ε-caprolactone) (Azo-PCL), and was characterized by various analysis techniques. The supramolecular assembly was examined in various pH environments and/or under UV-vis irradiation, showing the formation of supramolecular assemblies from regular spherical shapes to irregular aggregates with various hydrodynamic diameters. The 2D NOESY NMR studies showed the formation of inclusion complexation between Azo-PCL and ß-CD-g-PDMAEMA and between ß-CD and the side groups of PDMAEMA. The supramolecular assemblies could encapsulate doxorubicin to form spherical core-shell drug-carrying micelles with an entrapment efficiency of 66.1%. The effects of external environment stimuli on the in vitro drug release were investigated, showing light- and pH-modulated drug release properties. The cytotoxicity assessment indicated that the blank supramolecular micelles were nontoxic, whereas the drug-loaded micelles exhibited comparable or even superior anticancer activity to the anticancer activity of free DOX and inhibition of cancer cell proliferation. Therefore, the developed supramolecular assemblies can potentially be used as drug-controlled release carriers.

Preparation and vapor-sensitive properties of hydroxyl-terminated polybutadiene polyurethane conductive polymer nanocomposites based on polyaniline-coated multiwalled carbon nanotubes.

Polyaniline-coated multi-walled carbon nanotube (MWCNT) conductive polymer precursors (MWCNTs@PANI) were prepared by an in situ microemulsion oxidation polymerization of aniline in the case of MWCNTs, and then hydroxyl-terminated polybutadiene polyurethane conductive polymer nanocomposites based on MWCNTs@PANI (MWCNTs@PANI/HTPB PUs) were prepared through an in situ stepwise polymerization of HTPB and diisocyanates. The chemical structure was characterized by Fourier transform infrared spectroscopy (FTIR), Raman, x-ray diffraction, x-ray photoelectron spectroscopy and thermogravimetric analysis. The morphologies and dispersion behavior were examined by scanning electron microscopy, transmission electron microscopy and UV-vis transmittance. The MWCNTs@PANI/HTPB PUs nanocomposites were fabricated into film sensors for detection of volatile organic compound vapors, and displayed an evident response to trichloromethane vapor (CHCl3). The effect of MWCNTs on the conductivity and the responsivity to trichloromethane of conductive polymer nanocomposite films were studied, finding that the conductive composite films have fast and strong response, good repeatability and recoverability, and long-term stability. Consequently, they can be potentially applied for supervision and detection of interior and outdoor environmental gases or vapors.

Polymers prepared through an "ATRP polymerization-esterification" strategy for dual temperature- and reduction-induced paclitaxel delivery.

Clinically, the nanotherapy of tumors has been limited by the drug content, efficiency of targeted release, and bioavailability. In this study, we fabricated an amphiphilic block polymer, poly(2-methacryloyloxyethyl thiocticcarboxylate)-block-poly(N-isopropylacrylamide) (PMAOETC-b-PNIPAM), using an "ATRP polymerization-esterification" strategy for paclitaxel (PTX) delivery. The hydrophobic drug paclitaxel was encapsulated based on hydrogen bond interactions between PTX and the PMAOETC and PNIPAM blocks, together with hydrophobic interactions between PTX and PMAOETC segments, affording PTX-laden polymer micelles with ∼30% drug loading content. The critical micelle concentration of the PTX-loaded polymeric micellar aggregates was 34.53 mg l-1, as determined through fluorescence spectroscopy, which indicated favorable stability during infinite dilution by body fluids. The phase transition temperature of the micelles was tunable (36.10-39.48 °C) via adjusting the lengths of the blocks. The PTX-laden micelles showed the release of a significant amount of PTX in cancerous tissue, while negligible cytotoxicity was shown against HCT-116 cells in PBS at pH 7.4 and 37 °C. Further in vivo anticancer studies revealed that antitumor treatment using the PTX-laden micelles caused a significant suppression in tumor volume compared with a free-PTX-treated group. This study provides a reference for improving drug content levels and optimizing the therapeutic effects of drug delivery systems from the perspective of polymer preparation.

Novel electrochemical sensors from poly[N-(ferrocenyl formacyl) pyrrole]@multi-walled carbon nanotubes nanocomposites for simultaneous determination of ascorbic acid, dopamine and uric acid.

Novel multi-walled carbon nanotubes coated with poly[N-(ferrocenyl formacyl) pyrrole] (MWCNTs@PFFP) nanocomposites were prepared through the in situ oxidation polymerization reaction of N-(ferrocenyl formacyl) pyrrole in the presence of MWCNTs. The MWCNTs@PFFP nanocomposites were characterized by FT-IR, Raman, TGA, XRD, XPS, SEM and TEM techniques. The MWCNTs@PFFP nanocomposites were fabricated into novel electrochemical sensors for simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The electrochemical behavior of the MWCNTs@PFFP/GCE sensors was examined, and the parameters that influence electrochemical signals were optimized. The experimental results showed that the fabricated modified electrode sensors exhibited good sensitivity, selectivity, specificity, repeatability and a long lifetime, remaining the initial current of at least 92.5% after 15 days storage in air. The sensors possessed a linear response concentration range over 200-400 µM for AA, 2-16 µM for both DA and UA, and a limit of detection as low as 40.0, 1.1 and 7.3 × 10-1 µM for AA, DA and UA, respectively. They are expected to be used as a potential tool for the simultaneous detection of DA, AA and UA in the human body.

Organic-Inorganic Nanohybrid Electrochemical Sensors from Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles and In-Situ Wrapped with Poly(2-methacryloyloxyethyl ferrocenecarboxylate) for Detection of the Content of Food Additives.

An electrochemical sensor for detection of the content of aspartame was developed by modifying a glassy carbon electrode (GCE) with multi-walled carbon nanotubes decorated with zinc oxide nanoparticles and in-situ wrapped with poly(2-methacryloyloxyethyl ferrocenecarboxylate) (MWCNTs@ZnO/PMAEFc). MWCNTs@ZnO/PMAEFc nanohybrids were prepared through reaction of zinc acetate dihydrate with LiOH·H2O, followed by reversible addition-fragmentation chain transfer polymerization of 2-methacryloyloxyethyl ferrocenecarboxylate, and were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), Raman, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), scanning electron microscope (SEM), and transmission electron microscope (TEM) techniques. The electrochemical properties of the prepared nanohybrids with various composition ratios were examined by cyclic voltammetry (CV), and the trace additives in food and/or beverage was detected by using differential pulse voltammetry (DPV). The experimental results indicated that the prepared nanohybrids for fabrication of electrochemical modified electrodes possess active electroresponse, marked redox current, and good electrochemical reversibility, which could be mediated by changing the system formulations. The nanohybrid modified electrode sensors had a good peak current linear dependence on the analyte concentration with a wide detection range and a limit of detection as low as about 1.35 × 10-9 mol L-1, and the amount of aspartame was measured to be 35.36 and 40.20 µM in Coke zero, and Sprite zero, respectively. Therefore, the developed nanohybrids can potentially be used to fabricate novel electrochemical sensors for applications in the detection of beverage and food safety.

Preparation, film fabrication and gas-sensitive responsive properties of MWCNTs@PS-b-HTPB5-b-PS conductive polymer nanocomposites.

Novel nanocomposites consisting of polystyrene-block-polybutadienyl polyhexamethylene dicarbamate-block-polystyrene (PS-b-HTPB5-b-PS) and multiwalled carbon nanotubes (MWCNTs) were designed and prepared via noncovalent interactions. Scanning electron microscopy and transmission electron microscopy observations showed that segregated networks of MWCNTs were formed due to the cladding of PS-b-HTPB5-b-PS, presenting a parallel-arranged topology of the MWCNTs in a continuous PS-b-HTPB5-b-PS phase, which improved the dispersibility of the MWCNTs. The nanocomposites were fabricated into vapor sensing elements to detect CH2Cl2 vapor in the environment, exhibiting excellent responsive sensitivity, reproducibility and a low limit of detection (LOD) of 1 ppm when exposed to CH2Cl2 vapor. The chain extension of HTPB overcame the fragility and improved the tenacity of the thin films, and the responsivity was optimized by adjusting the content of the MWCNTs and the length of the PS chains. The newly developed conductive composites can be applied as a promising vapor sensor to accurately monitor CH2Cl2 vapor in the environment.

Theoretical Insight into a Nonadiabatic Proton-Coupled Electron Transfer Mechanism of Reduced Flavin Oxygenation.

The oxygenation of reduced flavin has been a fascinating research hotspot in flavin-dependent proteins because it plays an indispensable role in cellular metabolism and has potential applications in biocatalysis. This spin-forbidden reaction of high efficiency is far from being fully understood. Although investigation on the flavin chemistry has been going on for more than 60 years, there are few mechanistic explanations for the reaction of the singlet-reduced flavin with triplet oxygen. In this paper, the reaction between oxygen and the model of free reduced flavin (reduced lumiflavin anion) was studied by density functional and multireference calculations in detail. The results reveal that the reaction proceeds by an electronically nonadiabatic proton-coupled electron transfer mechanism. The intersystem crossing point has been captured.