Do Occupational Risks for Low Back Pain Differ From Risks for Specific Lumbar Disc Diseases?: Results of the German Lumbar Spine Study (EPILIFT).

STUDY DESIGN: A multicenter, population based, case-control study. OBJECTIVE: The aim of the present analysis is to clarify potential differences in the "occupational risk profiles" of structural lumbar disc diseases on the one hand, and low back pain (LBP) on the other hand. SUMMARY OF BACKGROUND DATA: Physical workplace factors seem to play an important etiological role. METHODS: We recruited 901 patients with structural lumbar disc diseases (disc herniation or severe disc space narrowing) and 233 control subjects with "low-back-pain." Both groups were compared with 422 "low-back pain free" control subjects. Case history, pain data, neurological deficits, and movement restrictions were documented. LBP was recorded by the Nordic questionnaire on musculoskeletal symptoms. All magnetic resonance imaging, computed tomography, and X-rays were inspected by an independent study radiologist. The calculation of cumulative physical workload was based on a computer-assisted interview and a biomechanical analysis by 3-D-dynamic simulation tool. Occupational exposures were documented for the whole working life. RESULTS: We found a positive dose-response relationship between cumulative lumbar load and LBP among men, but not among women. Physical occupational risks for structural lumbar disc diseases [odds ratio (OR) 3.7; 95% confidence interval (95% CI) 2.3-6.0] are higher than for LBP (OR 1.9; 95% CI 1.0-3.5). CONCLUSION: Our finding points to potentially different etiological pathways in the heterogeneous disease group of LBP. Results suggest that not all of the structural disc damage arising from physical workload leads to LBP. LEVEL OF EVIDENCE: 4.

Lumbar-load analysis of manual patient-handling activities for biomechanical overload prevention among healthcare workers.

Manual patient handling commonly induces high mechanical load on the lower back of healthcare workers. A long-term research project, the 'Third Dortmund Lumbar Load Study' (DOLLY 3), was conducted to investigate the lumbar load of caregivers during handling activities that are considered 'definitely endangering' in the context of worker's compensation procedures. Nine types of handling activities in or at a bed or chair were analysed. Measurement of action forces via specifically developed devices and posture recording by means of optoelectronic marker capturing and video recordings in order to quantify several lumbar-load indicators was previously described in detail. This paper provides the results of laboratory examinations and subsequent biomechanical model calculations focused on lumbar load and the potentials of load reduction by applying biomechanically 'optimized' transfer modes instead of a 'conventional' technique and, for a subgroup of tasks, the supplementary usage of small aids such as a sliding mat or a glide board. Lumbosacral-disc compressive force may vary considerably with respect to the performed task, the mode of execution, and individual performance. For any activity type, highest values were found for conventional performance, lower ones for the improved transfer mode, and the lowest compressive-force values were gathered when small aids were applied. Statistical significance was verified for 13 of these 17 comparisons. Analysing indicators for asymmetric loading shows that lateral-bending and torsional moments of force at the lumbosacral disc may reach high values, which can be reduced considerably by implementing an improved handling mode. When evaluating biomechanical loads with respect to age- and gender-specific work-design limits, none of the analysed tasks, despite execution mode, resulted in an acceptable load range. Therefore, applying a biomechanically adequate handling mode combined with small aids to lower the friction between patient and surfaces is highly recommended, especially to prevent overload in older caregivers.

Specificity of motor learning in simulator training of endoscopic-surgery skills.

The introduction of simulators for the practice of endoscopic-surgery sensori-motor skills opens a wide range of design options. An obvious one is augmented visual information early in practice, in particular a direct view of the site instead of the endoscopic view. We studied the effects of such augmented visual information on the simulated ablation of tissue with straight, horizontal and parallel cuts. Direct view had an immediate beneficial effect on performance as compared with endoscopic-view practice. However, in subsequent tests with endoscopic view the benefits disappeared and turned into costs for some aspects of performance, e.g., duration. This finding highlights for a simulated surgical task that optimisation of practice by a performance criterion may not result in optimisation by a transfer criterion. PRACTITIONER SUMMARY: Endoscopic surgery represents a challenge for human sensori-motor skills, but new simulator-based training methods give leeway for optimisation. A candidate is augmented visual feedback, in particular a direct rather than endoscopic view of the site. However, performance becomes dependent on the augmented feedback so that the costs outweigh the benefits.

Characteristic values of the lumbar load of manual patient handling for the application in workers' compensation procedures.

BACKGROUND: The human spine is often exposed to mechanical load in vocational activities especially in combination with lifting, carrying and positioning of heavy objects. This also applies in particular to nursing activities with manual patient handling. In the present study a detailed investigation on the load of the lumbar spine during manual patient handling was performed. METHODS: For a total of 13 presumably endangering activities with transferring a patient, the body movements performed by healthcare workers were recorded and the exerted action forces were determined with regard to magnitude, direction and lateral distribution in the time course with a "measuring bed", a "measuring chair" and a "measuring floor". By the application of biomechanical model calculations the load on the lowest intervertebral disc of the lumbar spine (L5-S1) was determined considering the posture and action force data for every manual patient handling. RESULTS: The results of the investigations reveal the occurrence of high lumbar load during manual patient handling activities, especially in those cases, where awkward postures of the healthcare worker are combined with high action forces caused by the patient's mass. These findings were compared to suitable issues of corresponding investigations provided in the literature. Furthermore measurement-based characteristic values of lumbar load were derived for the use in statement procedures concerning the disease no. 2108 of the German list of occupational diseases. CONCLUSIONS: To protect healthcare workers from mechanical overload and the risk of developing a disc-related disease, prevention measures should be compiled. Such measures could include the application of "back-fairer" nursing techniques and the use of "technical" and" small aids" to reduce the lumbar load during manual patient handling. Further studies, concerning these aspects, are necessary.

Measurement of action forces and posture to determine the lumbar load of healthcare workers during care activities with patient transfers.

Moving patients or other care activities with manual patient handling is characterized by high mechanical load on the lumbar spine of healthcare workers (HCWs). During the patient transfer activity, the caregivers exert lifting, pulling, and pushing forces varying over time with respect to amplitude and direction. Furthermore, the caregivers distinctly change their posture and frequently obtain postures asymmetrical to the median sagittal plane, including lateral bending and turning the trunk. This paper describes a procedure to determine lumbar load during patient transfer supported by measurement techniques and an exemplary application; this methodology represents the basis of a complex research project, the third 'Dortmund Lumbar Load Study (DOLLY 3)'. Lumbar load was determined by simulation calculations using a comprehensive biomechanical model ('The Dortmunder'). As the main influencing factors, the hand forces of the caregiver exerted during typical patient transfers and the posture and movements of the HCW were recorded in laboratory studies. The action forces were determined three-dimensionally with the help of a newly developed 'measuring bed', two different 'measuring chairs', a 'measuring bathtub', and a 'measuring floor'. To capture the forces during transfers in or at the bed, a common hospital bed was equipped with an additional framework, which is attached to the bedstead and connected to the bedspring frame via three-axial force sensors at the four corners. The other measuring systems were constructed similarly. Body movements were recorded using three-dimensional optoelectronic recording tools and video recordings. The posture and force data served as input data for the quantification of various lumbar-load indicators.

Ergonomic assessment of the posture of surgeons performing endoscopic transurethral resections in urology.

BACKGROUND: During transurethral endoscopic prostate and bladder operations the influence of an ergonomic redesign of the arrangement of the operation equipment - including the introduction of a video-assisted resection method ('monitor endoscopy') instead of directly viewing onto the operation area via the endoscope ('direct endoscopy') - was studied with respect to the postures of the surgeons. METHODS: Postures were analysed on the basis of video recordings of the surgeons performed in the operation theatre during live operations and subsequent visual posture estimation executed by an observer. In particular, head, trunk and arm positions were assigned to posture categories according to a newly developed posture classification schema. 10 urological operations with direct endoscopy and 9 with monitor endoscopy were included. RESULTS: Application of direct endoscopy coincides with distinct lateral and sagittal trunk and head inclinations, trunk torsion and strong forearm and upper arm elevations of the surgeons whereas operations with monitor endoscopy were performed with an almost upright head and trunk and hanging arms. The disadvantageous postures observed during direct endoscopy are mainly caused by the necessity to hold the endoscope continuously in close contact with the eye. CONCLUSION: From an ergonomic point of view, application of the video-assisted resection method should be preferred in transurethral endoscopic operations in order to prevent awkward postures of the surgeons and to limit muscular strain and fatigue. Furthermore, the application of the monitor method enables the use of a chair equipped with back support and armrests and benefits the reduction of postural stress.

Cumulative occupational lumbar load and lumbar disc disease--results of a German multi-center case-control study (EPILIFT).

BACKGROUND: The to date evidence for a dose-response relationship between physical workload and the development of lumbar disc diseases is limited. We therefore investigated the possible etiologic relevance of cumulative occupational lumbar load to lumbar disc diseases in a multi-center case-control study. METHODS: In four study regions in Germany (Frankfurt/Main, Freiburg, Halle/Saale, Regensburg), patients seeking medical care for pain associated with clinically and radiologically verified lumbar disc herniation (286 males, 278 females) or symptomatic lumbar disc narrowing (145 males, 206 females) were prospectively recruited. Population control subjects (453 males and 448 females) were drawn from the regional population registers. Cases and control subjects were between 25 and 70 years of age. In a structured personal interview, a complete occupational history was elicited to identify subjects with certain minimum workloads. On the basis of job task-specific supplementary surveys performed by technical experts, the situational lumbar load represented by the compressive force at the lumbosacral disc was determined via biomechanical model calculations for any working situation with object handling and load-intensive postures during the total working life. For this analysis, all manual handling of objects of about 5 kilograms or more and postures with trunk inclination of 20 degrees or more are included in the calculation of cumulative lumbar load. Confounder selection was based on biologic plausibility and on the change-in-estimate criterion. Odds ratios (OR) and 95% confidence intervals (CI) were calculated separately for men and women using unconditional logistic regression analysis, adjusted for age, region, and unemployment as major life event (in males) or psychosocial strain at work (in females), respectively. To further elucidate the contribution of past physical workload to the development of lumbar disc diseases, we performed lag-time analyses. RESULTS: We found a positive dose-response relationship between cumulative occupational lumbar load and lumbar disc herniation as well as lumbar disc narrowing among men and women. Even past lumbar load seems to contribute to the risk of lumbar disc disease. CONCLUSION: According to our study, cumulative physical workload is related to lumbar disc diseases among men and women.

The effects of muscle fatigue on rapid finger oscillations.

Two types of model for the control of rapid finger oscillations can be contrasted. According to the first type, any change of muscle characteristics induced by sustained isometric contractions should result in kinematic changes. According to the second type, kinematic characteristics should remain invariant while the timing of bursts of muscle activity exhibits compensatory adjustments. Following sustained isometric contractions of finger flexors and extensors, we observed essentially unchanged durations of the flexion and extension components of rapid finger oscillations, while the pattern of inter-burst intervals was modified so as to compensate the changed phasing of electromyographic bursts. These findings strongly suggest that even in extremely simple rapid finger oscillations motor control is configured to result in invariant kinematics.

Effect of high-dose creatine therapy on symptoms of exercise intolerance in McArdle disease: double-blind, placebo-controlled crossover study.

BACKGROUND: In a recent study, we showed that administration of low-dose creatine (Cr) (60 mg/kg daily) improved work capacity in patients with McArdle disease. OBJECTIVE: To assess the efficacy of high-dose Cr therapy in McArdle disease. DESIGN: Randomized, double-blind, placebo-controlled crossover study. PATIENTS: Nineteen patients with McArdle disease. INTERVENTION: Treatment with Cr, 150 mg/kg daily. Each treatment phase with Cr or placebo lasted 5 weeks. MAIN OUTCOME MEASURES: The patient's daily rating of symptoms of exercise intolerance. At the end of each treatment phase, serum creatine and serum creatine kinase levels, phosphorus 31 magnetic resonance spectroscopy, and surface electromyograms were assessed. RESULTS: Clinical end points revealed increases in the intensity of exercise-induced pain in working muscles (mean treatment-induced difference [d], 0.30 in log(score); 95% confidence interval [CI], 0.05-0.55; P =.02), the limitation of daily activities (d, 0.59; 95% CI, 0.22-0.97;P =.005), and body mass index (d, 0.33 kg/m2, 95% CI, 0.10-0.56 kg/m2; P =.008) with Cr use. Surface electromyograms revealed a smaller increase in the electromyographic amplitude over time during muscle contraction with Cr use (d, -13.52%/min; 95% CI, -23.71%/min to -3.34%/min; P =.01). There were no significant changes in phosphorus 31 magnetic resonance spectroscopy variables. CONCLUSIONS: Administration of high-dose Cr worsened the main clinical symptoms of exercise intolerance in McArdle disease. These neurologic adverse effects represent a major dose-limiting factor in Cr therapy for McArdle disease. Taken together with results of a previous study, the indication for symptomatic therapy with Cr needs to be clarified. An effective Cr dosage without adverse effects may be between 60 and 150 mg/kg daily.