Enhanced NO2 Sensitivity in Schottky-Contacted n-Type SnS2 Gas Sensors.

Layered materials are highly attractive in gas sensor research due to their extraordinary electronic and physicochemical properties. The development of cheaper and faster room-temperature detectors with high sensitivities especially in the parts per billion level is the main challenge in this rapidly developing field. Here, we show that sensitivity to NO2 (S) can be greatly improved by at least two orders of magnitude using an n-type electrode metal. Unconventionally for such devices, the ln(S) follows the classic Langmuir isotherm model rather than S as is for a p-type electrode metal. Excellent device sensitivities, as high as 13,000% for 9 ppm and 97% for 1 ppb NO2, are achieved with Mn electrodes at room temperature, which can be further tuned and enhanced with the application of a bias. Long-term stability, fast recovery, and strong selectivity toward NO2 are also demonstrated. Such impressive features provide a real solution for designing a practical high-performance layered material-based gas sensor.

Electrical Contact Barriers between a Three-Dimensional Metal and Layered SnS2.

Field-effect transistors derived from traditional 3D semiconductors are rapidly approaching their fundamental limits. Layered semiconducting materials have emerged as promising candidates to replace restrictive 3D semiconductor materials. However, contacts between metals and layered materials deviate from Schottky-Mott behavior when determined by transport methods, while X-ray photoelectron spectroscopy measurements suggest that the contacts should be at the Schottky limit. Here, we present a systematic investigation on the influence of metal selection when electrically contacting SnS2, a layered metal dichalcogenide semiconductor with the potential to replace silicon. It is found that the electrically measured barrier height depends also weakly on the work function of the metal contacts with slopes of 0.09 and -0.34 for n-type and p-type Schottky contacts, respectively. Based on the Kirchhoff voltage law and considering a current path induced by metallic defects, we found that the Schottky barrier still follows the Schottky-Mott limits and the electrically measured barrier height mainly originates from the van der Waals gap between the metal and SnS2, and the slope depends on the magnitude of the van der Waals capacitance.

Sub-millimeter size high mobility single crystal MoSe2 monolayers synthesized by NaCl-assisted chemical vapor deposition.

Monolayer MoSe2 is a transition metal dichalcogenide with a narrow bandgap, high optical absorbance and large spin-splitting energy, giving it great promise for applications in the field of optoelectronics. Producing monolayer MoSe2 films in a reliable and scalable manner is still a challenging task as conventional chemical vapor deposition (CVD) or exfoliation based techniques are limited due to the small domains/nanosheet sizes obtained. Here, based on NaCl assisted CVD, we demonstrate the simple and stable synthesis of sub-millimeter size single-crystal MoSe2 monolayers with mobilities ranging from 38 to 8 cm2 V-1 s-1. The average mobility is 12 cm2 V-1 s-1. We further determine that the optical responsivity of monolayer MoSe2 is 42 mA W-1, with an external quantum efficiency of 8.22%.

High Selectivity Gas Sensing and Charge Transfer of SnSe2.

SnSe2 is an anisotropic binary-layered material with rich physics, which could see it used for a variety of potential applications. Here, we investigate the gas-sensing properties of SnSe2 using first-principles calculations and verify predictions using a gas sensor made of few-layer SnSe2 grown by chemical vapor deposition. Theoretical simulations indicate that electrons transfer from SnSe2 to NO2, whereas the direction of charge transfer is the opposite for NH3. Notably, a flat molecular band appears around the Fermi energy after NO2 adsorption and the induced molecular band is close to the conduction band minimum. Moreover, compared with NH3, NO2 molecules adsorbed on SnSe2 have a lower adsorption energy and a higher charge transfer value. The dynamic-sensing responses of SnSe2 sensors confirm the theoretical predictions. The good match between the theoretical prediction and experimental demonstration suggests that the underlying sensing mechanism is related to the charge transfer and induced flat band. Our results provide a guideline for designing high-performance gas sensors based on SnSe2.