In Operando X-ray Spectroscopic and DFT Studies Revealing Improved H2 Evolution by the Synergistic Ni-Co Electron Effect in the Alkaline Condition.

The different electrolyte conditions, e.g., pH value, for driving efficient HER and OER are one of the major issues hindering the aim for electrocatalytic water splitting in a high efficiency. In this regard, seeking durable and active HER electrocatalysts to align the alkaline conditions of the OER is a promising solution. However, the success in this strategy will depend on a fundamental understanding about the HER mechanism at the atomic scale. In this work, we have provided thorough understanding for the electrochemical HER mechanisms in KOH over Ni- and Co-based hollow pyrite microspheres by in operando X-ray spectroscopies and DFT calculations, including NiS2, CoS2, and Ni0.5Co0.5S2. We discovered that the Ni sites in hollow NiS2 microspheres were very stable and inert, while the Co sites in hollow CoS2 microspheres underwent reduction and generated Co metallic crystal domains under HER. The generation of Co metallic sites would further deactivate H2 evolution due to the large hydrogen desorption free energy (-1.73 eV). In contrast, the neighboring Ni and Co sites in hollow Ni0.5Co0.5S2 microspheres exhibited the electronic interaction to elevate the reactivity of Ni and facilitate the stability of Co without structure or surface degradation. The energy barrier in H2O adsorption/dissociation was only 0.73 eV, followed by 0.06 eV for hydrogen desorption over the Ni0.5Co0.5S2 surface, revealing Ni0.5Co0.5S2 as a HER electrocatalyst with higher durability and activity than NiS2 and CoS2 in the alkaline medium due to the synergy of neighboring Ni and Co sites. We believe that the findings in our work offer a guidance toward future catalyst design.

Arrayed Pt Single Atoms via Phosphotungstic Acids Intercalated in Silicate Nanochannels for Efficient Hydrogen Evolution Reactions.

Single-atom catalysts, known for their high activity, have garnered significant interest. Currently, single-atom catalysts were prepared mainly on 2D substrates with random distribution. Here, we report a strategy for preparing arrayed single Pt (Pt1) atoms, which are templated through coordination with phosphotungstic acids (PTA) intercalated inside hexagonally packed silicate nanochannels for a high single Pt-atom loading of ca. 3.0 wt %. X-ray absorption spectroscopy, high-angle annular dark-field scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy, in conjunction with the density-functional theory calculation, collectively indicate that the Pt single atoms are stabilized via a four-oxygen coordination on the PTA within the nanochannels' inner walls. The critical reduction in the Pt-adsorption energy to nearly the cohesive energy of Pt clustering is attributed to the interaction between PTA and the silicate substrate. Consequently, the transition from single-atom dispersion to clustering of Pt atoms can be controlled by adjusting the number density of PTA intercalated within the silicate nanochannels, specifically when the number ratio of Pt atoms to PTA changes from 3.7 to 18. The 3D organized Pt1-PTA pairs, facilitated by the arrayed silicate nanochannels, demonstrate high and stable efficiency with a hydrogen production rate of ca. 300 mmol/h/gPt─approximately twice that of the best-reported Pt efficiency in polyoxometalate-based photocatalytic systems.

Improved Mass-Transfer Enhances Photo-Driven Dye Degradation and H2 Evolution over a Few-Layer WS2/ZnO Heterostructure.

In this study, we observed the enhanced photocatalytic activity of a few-layer WS2/ZnO (WZ) heterostructure toward dye degradation and H2 production. The few-layer WS2 acted as a co-catalyst that separated photogenerated electron/hole pairs and provided active sites for reactions, leading to the rate of photocatalytic H2 production of WZ being 35% greater than that over the bare ZnO nanoparticles. Moreover, vortex-stirring accelerated the mass-transfer of the reactants, leading to the efficiency of dye photodegradation being 3 times higher than that obtained without high-speed stirring. We observed a similar effect for H2 production, with greater photocatalytic performance arising from the increased mass-transfer of H2 from the catalyst surface to the atmosphere.

Enhanced Production of Formic Acid in Electrochemical CO2 Reduction over Pd-Doped BiOCl Nanosheets.

Bismuth oxyhalides (BiOX, X = F, Cl, Br, I) are emerging energy materials because of their remarkable catalytic activity. The BiOX compounds usually have a tetragonal type crystal structure with unique layered morphology consisting of [X-Bi-O-Bi-X] sheets. Although the BiOX nanosheets exposed with {001} facets perform superior photoactivity, there is lack of understanding about their capability in the electrochemical CO2 reduction reaction (CO2RR). Herein, we adopt wet-chemical syntheses to make 2D BiOCl and Pd-doped BiOCl nanosheets for CO2RR. In the results, formic acid is the only one kind of product converted from CO2 along with H2 gas from water reduction over both BiOCl and Pd-doped BiOCl nanosheets. By thorough analyses with ex situ and in situ spectroscopy, the results reflect that (1) metallic Bi0 atoms generated by the applied negative potentials serve as the catalytic sites for the hydrogen evolution reaction (HER) and CO2RR and (2) the existence of doped Pd ions in the BiOCl structure reduces the barrier of charge transfer over the nanosheets, which enhances HER and CO2RR activities. We believe that the observations are important references for making catalysts toward CO2RR performance.

In situ TEM observations of void movement in Ag nanowires affecting the electrical properties under biasing.

In this study we investigated the electromigration (EM) of metal electrodes and the effect of stacking faults on the EM in Ag nanowires (NWs). We used the galvanic replacement method to synthesize these NWs by controlling the concentration of silver nitrate. In situ transmission electron microscopy (TEM) revealed the presence of both intrinsic and extrinsic stacking faults in the Ag NWs. We found that planar defects increased the lifetime of the devices with an intrinsic change in the material properties. Our EM measurements involved examinations of the change in electrical resistance (arising from void formation in the NW as a result of electromigration) as well as direct visual observation of the shape (using in situ TEM).

Enhancement of NH3 Production in Electrochemical N2 Reduction by the Cu-Rich Inner Surfaces of Beveled CuAu Nanoboxes.

The global ammonia yield is critical to the fertilizer industry as the global food demand is highly dependent on it, whereas, NH3 is also a key chemical for pharmaceutical, textile, plastic, explosive, and dye-making industries. At present, the demand for NH3 is fulfilled by the Haber-Bosch method, which consumes 1-3% of global energy and causes 0.5-1% CO2 emission every year. To reduce emissions and improve energy efficiency, the electrochemical nitrogen gas reduction reaction (N2RR) has received much attention and support after the funding announcement by the U.S. Department of Energy. In this work, we have created hollow CuAu nanoboxes with Cu-rich inner walls to improve the NH3 Faradaic efficiency in N2RR. These beveled nanoboxes are produced in different degrees of corner and edge etching, which produces both polyhedral and concave structures. In N2RR, the binary CuAu nanoboxes enhanced NH3 production compared to individual Au and Cu nanocubes. The results of DFT calculations suggest the Cu-rich inner walls in the hollow beveled CuAu nanoboxes play a major role in their performance by reducing the free energy ΔG*NNH for the potential-determining step to form *NNH (* + N2(g) + H+ + e- → *NNH). Meanwhile, the results in 10-cycle and solar-illuminated N2RR indicate the beveled CuAu nanoboxes are not only robust electrocatalysts but show promise in photocatalysis as well.

Surfactant-free synthesis of ultralong silver nanowires for durable transparent conducting electrodes.

The present study employed the surfactant-free growth of ultralong (∼50 µm) silver nanowires (AgNWs) with a high aspect ratio (more than 1000) by galvanic replacement. AgNW conducting films were fabricated as electrodes using drop-casting. The AgNW film had 90% transmittance to 550 nm light with a sheet resistance of 232 Ω sq-1. Further, the flexibility test of the transparent flexible AgNW/MoS2 device array indicated that the variation of the current was within 5% when a strain of 0.5% was applied to the device; additionally, the device showed a 13% decrease in current after experiencing 50 000 bending cycles. This study indicated that the ultralong AgNWs synthesized using galvanic replacement have potential for applications as transparent and flexible electrodes.

Strain-Enhanced Metallic Intermixing in Shape-Controlled Multilayered Core-Shell Nanostructures: Toward Shaped Intermetallics.

Controlling the surface composition of shaped bimetallic nanoparticles could offer precise tunability of geometric and electronic surface structure for new nanocatalysts. To achieve this goal, a platform for studying the intermixing process in a shaped nanoparticle was designed, using multilayered Pd-Ni-Pt core-shell nanocubes as precursors. Under mild conditions, the intermixing between Ni and Pt could be tuned by changing layer thickness and number, triggering intermixing while preserving nanoparticle shape. Intermixing of the two metals is monitored using transmission electron microscopy. The surface structure evolution is characterized using electrochemical methanol oxidation. DFT calculations suggest that the low-temperature mixing is enhanced by shorter diffusion lengths and strain introduced by the layered structure. The platform and insights presented are an advance toward the realization of shape-controlled multimetallic nanoparticles tailored to each potential application.

Facet-dependent optical properties of polyhedral Au-Cu2O core-shell nanocrystals.

We fabricated Au-Cu2O core-shell octahedra, cuboctahedra, and nanocubes having sizes of 90-220 nm using 50 nm octahedral cores. The smaller particle sizes minimize the strong light scattering features from the Cu2O shells and enable the surface plasmon resonance (SPR) absorption band of the gold cores to be clearly identified. Beyond a lower shell thickness limit, the SPR band positions of the gold cores are independent of the shell thickness, but are strongly dependent on the exposed particle surfaces. The plasmonic band red-shifts from Au-Cu2O octahedra to cuboctahedra and nanocubes, and differs by as much as 26 nm between the octahedra and the nanocubes. The same facet-dependent optical effects were observed using larger octahedral gold cores and cubic gold cores. In contrast, simulation spectra show progressively red-shifted SPR band positions with increasing shell thickness. The Cu2O shells are also found to exhibit facet-dependent optical behavior. These nanocrystals can respond to changes in the solvent environment such as solvents with different refractive indices, indicating that the plasmonic field of the gold cores can extend beyond the particle surfaces despite the presence of thick shells. Plane-selective spectral responses to low concentrations of surfactants were also recorded.

Formation of Ag2S cages from polyhedral Ag2O nanocrystals and their electrochemical properties.

Ag2O nanocubes, rhombicuboctahedra, octahedra, and hexapods have been employed as templates for the generation of Ag2O-Ag2S core-shell structures through a rapid sulfidation process in a basic solution. Addition of an ammonia etching solution quickly removes the Ag2O cores, thereby resulting in the formation of Ag2S cages with morphologies that resemble the starting templates. The composition of the Ag2S shells and cages has been extensively determined by various analytical techniques including X-ray and electron diffraction and X-ray photoelectron spectroscopy. The Ag2S shells have a monoclinic crystal structure and are polycrystalline with some amorphous and porous regions. The nanocage formation process has been captured by transmission electron microscopy (TEM). Gap spaces are formed initially between the cores and the shells owing to uniform etching of the Ag2O cores on all of the faces. No linkages connecting the cores to the shells have been observed. Depending on the potential scanning ranges applied, four types of electrochemical redox behavior have been identified for the Ag2O and Ag2O-Ag2S cubes in a basic solution. The ability to easily fabricate thin sheets of Ag2S over different Ag2O surfaces should extend the applications of Ag2S nanostructures.

Fast synthesis of PbS nanocrystals in aqueous solution with shape evolution from cubic to octahedral structures and their assembled structures.

In this study, we have developed for the first time a fast and energy-efficient method for the synthesis of PbS nanocrystals with systematic shape evolution from cubic to truncated cubic, cuboctahedral, truncated octahedral, and octahedral structures. The method involves the addition of a small volume of preheated lead acetate and thioacetamide (TAA) mixture to an aqueous growth solution of lead acetate, thioacetamide, cetyltrimethylammonium bromide, and nitric acid. By varying the amount of thioacetamide added to the growth solution, PbS nanocrystals with different morphologies were generated in 2 h at 90 °C. Slight experimental modifications were adopted to generate truncated octahedra. The nanocrystals have very uniform dimensions with average sizes of 32-47 nm. Their structures have been extensively examined by electron microscopy. Nanocube sizes can also be tuned within a range. UV/Vis absorption spectra of PbS cubes, cuboctahedra, and octahedra all show decreasing but continuous absorption from 300 nm to beyond 1000 nm. By monitoring the speed of darkening of solution color, particle growth rate was found to be fastest for nanocubes, followed by truncated cubes, cuboctahedra, and octahedra. These monodisperse nanocrystals can readily form self-assembled structures. Truncated cubes and octahedra that form monolayer and multilayer packing arrangements have also been studied. This green approach to the synthesis of PbS nanocrystals with fine size and shape control should allow for investigations of their facet-dependent properties and the fabrication of novel heterostructures.

Solvothermal synthesis of zincblende and wurtzite CuInS2 nanocrystals and their photovoltaic application.

We report a simple solvothermal synthesis approach to the growth of CuInS(2) nanocrystals with zincblende- and wurtzite-phase structures. Zincblende nanocrystals with particle sizes of 10-20 nm were produced using oleylamine as the solvent. When ethylenediamine was used as the solvent, similarly sized wurtzite nanocrystals with some degree of particle aggregation were formed. Use of a mixture of these solvents gave products with mixed phases including some polyhedral nanostructures. The crystal phases of these nanocrystals were carefully determined by X-ray diffraction and transmission electron microscopy analysis. All the samples exhibit strong absorption from the entire visible light region to the near-infrared region beyond 1300 nm. Pure-phase zincblende and wurtzite CuInS(2) nanocrystals were employed as ink in the fabrication of solar cells. The spray-coated nanocrystal layer was subjected to a selenization process. A power conversion efficiency of ~0.74% and a good external quantum efficiency profile over broad wavelengths have been measured. The results demonstrate that wurtzite and zincblende CuInS(2) nanocrystals may be attractive precursors to light-absorbing materials for making efficient photovoltaic devices.

Synthesis of Cu2O nanocrystals from cubic to rhombic dodecahedral structures and their comparative photocatalytic activity.

In this study, a new series of Cu(2)O nanocrystals with systematic shape evolution from cubic to face-raised cubic, edge- and corner-truncated octahedral, all-corner-truncated rhombic dodecahedral, {100}-truncated rhombic dodecahedral, and rhombic dodecahedral structures have been synthesized. The average sizes for the cubes, edge- and corner-truncated octahedra, {100}-truncated rhombic dodecahedra, and rhombic dodecahedra are approximately 200, 140, 270, and 290 nm, respectively. An aqueous mixture of CuCl(2), sodium dodecyl sulfate, NaOH, and NH(2)OH·HCl was prepared to produce these nanocrystals at room temperature. Simple adjustment of the amounts of NH(2)OH·HCl introduced enables this particle shape evolution. These novel particle morphologies have been carefully analyzed by transmission electron microscopy (TEM). The solution color changes quickly from blue to green, yellow, and then orange within 1 min of reaction in the formation of nanocubes, while such color change takes 10-20 min in the growth of rhombic dodecahedra. TEM examination confirmed the rapid production of nanocubes and a substantially slower growth rate for the rhombic dodecahedra. The rhombic dodecahedra exposing only the {110} facets exhibit an exceptionally good photocatalytic activity toward the fast and complete photodegradation of methyl orange due to a high number density of surface copper atoms, demonstrating the importance of their successful preparation. They may serve as effective and cheap catalysts for other photocatalytic reactions and organic coupling reactions.

Seed-mediated and iodide-assisted synthesis of gold nanocrystals with systematic shape evolution from rhombic dodecahedral to octahedral structures.

We report the development of a seed-mediated and iodide-assisted method for the synthesis of monodisperse gold nanocrystals with systematic shape evolution from rhombic dodecahedral to octahedral structures. Particle growth is complete in 15 min at room temperature, so the process is fast and energy-efficient. By progressively increasing the volume of KI used in a growth solution while keeping the amount of ascorbic acid added constant, nanocrystals with morphologies that vary from rhombic dodecahedral to rhombicuboctahedral, edge- and corner-truncated octahedral, corner-truncated octahedral, and octahedral structures were synthesized. The nanocrystals are monodisperse in size and readily form self-assembled structures on substrates. By simply adjusting the volume of gold seed solution added to a growth solution, particle sizes of the octahedral gold nanocrystals can be tuned with average opposite corner-to-corner distances of 42, 48, 54, 60, 68, 93, 107, and 125 nm. In the presence of HAuCl(4), iodide may act as a reducing agent. Variation of its volume in the solution may slightly modulate the reduction rate and affect the final crystal morphology. Intermediate structures collected during crystal growth reveal the presence of many twisted structures that surround a developing nanocrystal core. This nanocrystal growth mechanism and the less important role of surfactant in directing the polyhedral nanocrystal morphology is discussed.

Synthesis of Ag2O nanocrystals with systematic shape evolution from cubic to hexapod structures and their surface properties.

We report the development of a facile method for the synthesis of Ag(2)O crystals with systematic shape evolution from cubic to edge- and corner-truncated cubic, rhombicuboctahedral, edge- and corner-truncated octahedral, octahedral, and hexapod structures by mixing AgNO(3), NH(4)NO(3), and NaOH at molar ratios of 1:2:11.8. A sufficient volume of NaOH solution was first added to a mixture of AgNO(3) and NH(4)NO(3) solution to promote the formation of Ag(NH(3))(2)(+) complex ions and the growth of Ag(2)O nanocrystals with good morphological control. The crystals are mostly submicrometer-sized. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy characterization has been performed to determine the crystalline surface facets. A band gap value of approximately 1.45 eV has been found for the octahedral Ag(2)O crystals. By changing the molar ratios of AgNO(3)/NH(4)NO(3)/NaOH to 1:2:41.8, corner-depressed rhombicuboctahedra and elongated hexapods were obtained as a result of enhanced crystal growth along the [100] directions. Smaller nanocubes with average sizes of approximately 200 and 300 nm and octapods can also be prepared by adjusting the reagent molar ratios and their added volumes. Both the octahedra and hexapods with largely silver atom-terminated {111} surface facets responded repulsively and moved to the surface of the solution when dispersing in a solution of positively charged methylene blue, but can be suspended in a negatively charged methyl orange solution. The cubes and octapods, bounded by the {100} faces, were insensitive to the molecular charges in solution. The dramatic facet-dependent surface properties of Ag(2)O crystals have been demonstrated.