Mechanistic Study on the Photogeneration of Hydrogen by Decamethylruthenocene.

Detailed studies on hydrogen evolution by decamethylruthenocene ([Cp*2 RuII ]) highlighted that metallocenes are capable of photoreducing hydrogen without the need for an additional sensitizer. Electrochemical, gas chromatographic, and spectroscopic (UV/Vis, 1 H and 13 C NMR) measurements corroborated by DFT calculations indicated that the production of hydrogen occurs by a two-step process. First, decamethylruthenocene hydride [Cp*2 RuIV (H)]+ is formed in the presence of an organic acid. Subsequently, [Cp*2 RuIV (H)]+ is reversibly reduced in a heterolytic reaction with one-photon excitation leading to a first release of hydrogen. Thereafter, the resultant decamethylruthenocenium ion [Cp*2 RuIII ]+ is further reduced with a second release of hydrogen by deprotonation of a methyl group of [Cp*2 RuIII ]+ . Experimental and computational data show spontaneous conversion of [Cp*2 RuII ] to [Cp*2 RuIV (H)]+ in the presence of protons. Calculations highlight that the first reduction is endergonic (ΔG0 =108 kJ mol-1 ) and needs an input of energy by light for the reaction to occur. The hydricity of the methyl protons of [Cp*2 RuII ] was also considered.

Photoproduction of Hydrogen by Decamethylruthenocene Combined with Electrochemical Recycling.

The photoinduced hydrogen evolution reaction (HER) by decamethylruthenocene, Cp2 *RuII (Cp*=C5 Me5 ), is reported. The use of a metallocene to photoproduce hydrogen is presented as an alternative strategy to reduce protons without involving an additional photosensitizer. The mechanism was investigated by (spectro)electrochemical and spectroscopic (UV/Vis and 1 H NMR) measurements. The photoactivated hydride involved was characterized spectroscopically and the resulting [Cp2 *RuIII ]+ species was electrochemically regenerated in situ on a fluorinated tin oxide electrode surface. A promising internal quantum yield of 25 % was obtained. Optimal experimental conditions- especially the use of weakly coordinating solvent and counterions-are discussed.

Boosting water oxidation layer-by-layer.

Electrocatalysis of water oxidation was achieved using fluorinated tin oxide (FTO) electrodes modified with layer-by-layer deposited films consisting of bilayers of negatively charged citrate-stabilized IrO2 NPs and positively charged poly(diallyldimethylammonium chloride) (PDDA) polymer. The IrO2 NP surface coverage can be fine-tuned by controlling the number of bilayers. The IrO2 NP films were amorphous, with the NPs therein being well-dispersed and retaining their as-synthesized shape and sizes. UV/vis spectroscopic and spectro-electrochemical studies confirmed that the total surface coverage and electrochemically addressable surface coverage of IrO2 NPs increased linearly with the number of bilayers up to 10 bilayers. The voltammetry of the modified electrode was that of hydrous iridium oxide films (HIROFs) with an observed super-Nernstian pH response of the Ir(III)/Ir(IV) and Ir(IV)-Ir(IV)/Ir(IV)-Ir(V) redox transitions and Nernstian shift of the oxygen evolution onset potential. The overpotential of the oxygen evolution reaction (OER) was essentially pH independent, varying only from 0.22 V to 0.28 V (at a current density of 0.1 mA cm(-2)), moving from acidic to alkaline conditions. Bulk electrolysis experiments revealed that the IrO2/PDDA films were stable and adherent under acidic and neutral conditions but degraded in alkaline solutions. Oxygen was evolved with Faradaic efficiencies approaching 100% under acidic (pH 1) and neutral (pH 7) conditions, and 88% in alkaline solutions (pH 13). This layer-by-layer approach forms the basis of future large-scale OER electrode development using ink-jet printing technology.

Charging and discharging at the nanoscale: Fermi level equilibration of metallic nanoparticles.

The redox properties of metallic nanoparticles are discussed, in particular the relationships between excess charge, size and the Fermi level of the electrons. The redox potentials are derived using simple electrostatic models to provide a straightforward understanding of the basic phenomena. The different techniques used to measure the variation of Fermi level are presented. Finally, redox aspects of processes such as toxicity, electrochromicity and surface plasmon spectroscopy are discussed.

Catalysis of water oxidation in acetonitrile by iridium oxide nanoparticles.

Water oxidation catalysed by iridium oxide nanoparticles (IrO2 NPs) in water-acetonitrile mixtures using [RuIII(bpy)3]3+ as oxidant was studied as a function of the water content, the acidity of the reaction media and the catalyst concentration. It was observed that under acidic conditions (HClO4) and at high water contents (80% (v/v)) the reaction is slow, but its rate increases as the water content decreases, reaching a maximum at approximately equimolar proportions (≈25% H2O (v/v)). The results can be rationalized based on the structure of water in water-acetonitrile mixtures. At high water fractions, water is present in highly hydrogen-bonded arrangements and is less reactive. As the water content decreases, water clustering gives rise to the formation of water-rich micro-domains, and the number of bonded water molecules decreases monotonically. The results presented herein indicate that non-bonded water present in the water micro-domains is considerably more reactive towards oxygen production. Finally, long term electrolysis of water-acetonitrile mixtures containing [RuII(bpy)3]2+ and IrO2 NPs in solution show that the amount of oxygen produced is constant with time demonstrating that the redox mediator is stable under these experimental conditions.

Selective electrocatalytic oxidation of a re-methyl complex to methanol by a surface-bound Ru(II) polypyridyl catalyst.

The complex [Ru(Mebimpy)(4,4'-((HO)2OPCH2)2bpy)(OH2)](2+) surface bound to tin-doped indium oxide mesoporous nanoparticle film electrodes (nanoITO-Ru(II)(OH2)(2+)) is an electrocatalyst for the selective oxidation of methylrhenium trioxide (MTO) to methanol in acidic aqueous solution. Oxidative activation of the catalyst to nanoITO-Ru(IV)(OH)(3+) induces oxidation of MTO. The reaction is first order in MTO with rate saturation observed at [MTO] > 12 mM with a limiting rate constant of k = 25 s(-1). Methanol is formed selectively in 87% Faradaic yield in controlled potential electrolyses at 1.3 V vs NHE. At higher potentials, oxidation of MTO by nanoITO-Ru(V)(O)(3+) leads to multiple electrolysis products. The results of an electrochemical kinetics study point to a mechanism in which surface oxidation to nanoITO-Ru(IV)(OH)(3+) is followed by direct insertion into the rhenium-methyl bond of MTO with a detectable intermediate.

Gold metal liquid-like droplets.

Simple methods to self-assemble coatings and films encompassing nanoparticles are highly desirable in many practical scenarios, yet scarcely any examples of simple, robust approaches to coat macroscopic droplets with continuous, thick (multilayer), reflective and stable liquid nanoparticle films exist. Here, we introduce a facile and rapid one-step route to form films of reflective liquid-like gold that encase macroscopic droplets, and we denote these as gold metal liquid-like droplets (MeLLDs). The present approach takes advantage of the inherent self-assembly of gold nanoparticles at liquid-liquid interfaces and the increase in rates of nanoparticle aggregate trapping at the interface during emulsification. The ease of displacement of the stabilizing citrate ligands by appropriate redox active molecules that act as a lubricating molecular glue is key. Specifically, the heterogeneous interaction of citrate stabilized aqueous gold nanoparticles with the lipophilic electron donor tetrathiafulvalene under emulsified conditions produces gold MeLLDs. This methodology relies exclusively on electrochemical reactions, i.e., the oxidation of tetrathiafulvalene to its radical cation by the gold nanoparticle, and electrostatic interactions between the radical cation and nanoparticles. The gold MeLLDs are reversibly deformable upon compression and decompression and kinetically stable for extended periods of time in excess of a year.

Photoreduction of CO2 using [Ru(bpy)2(CO)L]n+ catalysts in biphasic solution/supercritical CO2 systems.

The reduction of CO2 in a biphasic liquid-condensed gas system was investigated as a function of the CO2 pressure. Using 1-benzyl-1,4-dihydronicotinamide (BNAH) as sacrificial electron donor dissolved in a dimethylformamide-water mixture and [Ru(bpy)2(CO)L](n+) as a catalyst and [Ru(bpy)3](2+) as a photosensitizer, the reaction was found to produce a mixture of CO and formate, in total about 250 µmol after just 2 h. As CO2 pressure increases, CO formation is greatly favored, being four times greater than that of formate in aqueous systems. In contrast, formate production was independent of CO2 pressure, present at about 50 µmol. Using TEOA as a solvent instead of water created a single-phase supercritical system and greatly favored formate synthesis, but similarly increasing CO2 concentration favored the CO catalytic cycle. Under optimum conditions, a turnover number (TON) of 125 was obtained. Further investigations of the component limits led to an unprecedented TON of over 1000, and an initial turnover frequency (TOF) of 1600 h(-1).

Coordination chemistry of single-site catalyst precursors in reductively electropolymerized vinylbipyridine films.

Reductive electropolymerization of [Ru(II)(PhTpy)(5,5'-dvbpy)(Cl)](PF6) and [Ru(II)(PhTpy)(5,5'-dvbpy)(MeCN)](PF6)2 (PhTpy is 4'-phenyl-2,2':6',2″-terpyridine; 5,5'-dvbpy is 5,5'-divinyl-2,2'-bipyridine) on glassy carbon electrodes gives well-defined films of poly{[Ru(II)(PhTpy)(5,5'-dvbpy)(Cl)](PF6)} (poly-1) or poly{[Ru(II)(PhTpy)(5,5'-dvbpy)(MeCN)](PF6)2} (poly-2). Oxidative cycling of poly-2 with added NO3(-) results in the replacement of coordinated MeCN by NO3(-) to give poly{[Ru(II)(PhTpy)(5,5'-dvbpy)(NO3)](+)}, and with 0.1 M HClO4, replacement by H2O occurs to give poly{[Ru(II)(PhTpy)(5,5'-dvbpy)(OH2)](2+)} (poly-OH2). Although analogous aqua complexes (e.g., [Ru(tpy)(bpy)(OH2)](2+)) undergo rapid loss of H2O to MeCN in solution, poly-OH2 and poly-OH2(+) are substitutionally inert in MeCN. The substitution chemistry is reversible, with reductive scans of poly-1 or poly-OH2 in MeCN resulting in poly-2, although with some loss of Faradaic response.

Melittin adsorption and lipid monolayer disruption at liquid-liquid interfaces.

Melittin, a membrane-active peptide with antimicrobial activity, was investigated at the interface formed between two immiscible electrolyte solutions (ITIES) supported on a metallic electrode. Ion-transfer voltammetry showed well-defined semi-reversible transfer peaks along with adsorptive peaks. The reversible adsorption of melittin at the liquid-liquid interface is qualitatively discussed from voltammetric data and experimentally confirmed by real-time image analysis of video snapshots. It is also demonstrated that polarization of the water/1,2-DCE interface results in drastic drop shape variations caused by large variations of the interfacial tension. The experimental data also confirmed that maximum adsorption occurs near the ion transfer potential. Finally, the interaction of melittin with a monolayer of L-α-dipalmitoyl phosphatidylcholine (DPPC) was also investigated showing that melittin destabilizes the lipidic monolayer facilitating its desorption. The non-covalent complex formation between melittin and DPPC was confirmed by mass spectrometry.

LEPA: from proteomics to energy conversion.

This review article summarizes the different fields of research at the Laboratoire d'Electrochimie Physique et Analytique at the Ecole Polytechnique Fédérale de Lausanne. The research areas covered include charge transfer reactions at soft interfaces, bio-analytical microchips and electrophoretic methods, electrochemical ionization methods for mass spectrometry and Scanning Electrochemical Microscopy (SECM).

Hydrogen evolution catalyzed by electrodeposited nanoparticles at the liquid/liquid interface.

Aqueous protons reduction by decamethylferrocene in 1,2-dichloroethane can be catalyzed efficiently by platinum and palladium nanoparticles electrogenerated in situ at the liquid-liquid interface.

Copper(I) and copper(II) binding to ß-amyloid 16 (Aß16) studied by electrospray ionization mass spectrometry.

Copper-ß-amyloid 16 (Aß16) complexes were investigated by electrospray ionization mass spectrometry (ESI-MS). Copper(i) and (ii) complexes were formed on-line in a microchip electrospray emitter by using a sacrificial copper electrode as the anode in positive ionization mode. In the presence of ascorbic acid in the peptide solution, the amount of Cu(i)-Aß16 generated electrochemically was even higher. A kinetic model is proposed to account for the generation of copper complexes. The structure of Cu(i)-Aß16 was investigated by tandem mass spectrometry (MS/MS), and the binding site of Cu(i) to Aß16 was identified at the His13, His14 residues. Cu(ii)-Aß16 was also investigated by MS/MS and, based on the unusual observations of a-ions, the two binding residues of His13 and His14 of Aß16 to Cu(ii) were also confirmed. This approach provides direct information on Cu(i)-Aß16 complexes generated in solution from metallic copper and gives evidence that both His13 and His14 are involved in the coordination of both Cu(i)- and Cu(ii)-Aß16 complexes.

Formation and study of single metal ion-phospholipid complexes in biphasic electrospray ionization mass spectrometry.

Single metal ion-phospholipid complexes are observed in biphasic electrospray ionization mass spectrometry (BESI-MS) using a dual-channel microsprayer. Such a microsprayer makes it possible to put into contact two immiscible liquids within the Taylor cone. Thus, L-α-dipalmitoyl phosphatidylcholine (DPPC) dissolved in 1,2-dichloroethane (DCE) reacts with aqueous metal cations (M = Na(+), K(+), Ca(2+), Cu(2+), La(3+)) yielding the formation of [M-DPPC(n)](z+) complexes. The number of phospholipid molecules ranges from 1 to 4 for monovalent ions, to 8 for divalent and to more than 10 for trivalent ions respectively. The large number of ligands observed involves the formation of solvent free single ion-phospholipid complexes.

Molecular electrocatalysis at soft interfaces.

The fundamental aspects of electrochemistry at liquid-liquid interfaces are introduced to present the concept of molecular electrocatalysis. Here, a molecular catalyst is adsorbed at the interface to promote a proton coupled electron transfer reaction such as hydrogen evolution or oxygen reduction using lipophilic electron donors.

Oxygen reduction catalyzed by a fluorinated tetraphenylporphyrin free base at liquid/liquid interfaces.

The diprotonated form of a fluorinated free base porphyrin, namely 5-(p-aminophenyl)-10,15,20-tris(pentafluorophenyl)porphyrin (H(2)FAP), can catalyze the reduction of oxygen by a weak electron donor, namely ferrocene (Fc). At a water/1,2-dichloroethane interface, the interfacial formation of H(4)FAP(2+) is observed by UV-vis spectroscopy and ion-transfer voltammetry, due to the double protonation of H(2)FAP at the imino nitrogen atoms in the tetrapyrrole ring. H(4)FAP(2+) is shown to bind oxygen, and the complex in the organic phase can easily be reduced by Fc to produce hydrogen peroxide as studied by two-phase reactions with the Galvani potential difference between the two phases being controlled by the partition of a common ion. Spectrophotometric measurements performed in 1,2-dichloroethane solutions clearly evidence that reduction of oxygen by Fc catalyzed by H(4)FAP(2+) only occurs in the presence of the tetrakis(pentafluorophenyl)borate (TB(-)) counteranion in the organic phase. Finally, ab initio computations support the catalytic activation of H(4)FAP(2+) on oxygen.

Interfacial complexes between a protein and lipophilic ions at an oil-water interface.

The interaction between an intact protein and two lipophilic ions at an oil-water interface has been investigated using cyclic voltammetry, impedance based techniques and a newly developed method in which the biphasic oil-water system is analyzed by biphasic electrospray ionization mass spectrometry (BESI-MS), using a dual-channel electrospray emitter. It is found that the protein forms interfacial complexes with the lipophilic ions and that it specifically requires the presence of the oil-water interface to be formed under the experimental conditions. Furthermore, impedance based techniques and BESI-MS with a common ion to polarize the interface indicated that the Galvani potential difference across the oil-water interface significantly influences the interfacial complexation degree. The ability to investigate protein-ligand complexes formed at polarized liquid-liquid interfaces is thus a new analytical method for assessing potential dependent interfacial complexation using a structure elucidating detection principle.

Dioxygen reduction by cobalt(II) octaethylporphyrin at liquid|liquid interfaces.

Oxygen reduction catalyzed by cobalt(II) (2,3,7,8,12,13,17,18-octaethylporphyrin) [Co(OEP)] at soft interfaces is studied by voltammetry and biphasic reactions. When Co(OEP) is present in a solution of 1,2-dichloroethane in contact with an aqueous acidic solution, oxygen is reduced if the interface is positively polarized (water phase versus organic phase). This reduction reaction is facilitated when an additional electron donor, here ferrocene, is present in excess in the organic phase.

Peptide-phospholipid complex formation at liquid-liquid interfaces.

Two peptides known to interact with receptors embedded in cell membranes, angiotensin III (Ang III) and Leu-enkephalin (LeuEnk), were studied electrochemically at the interface formed between two immiscible electrolyte solutions modified by an adsorbed monolayer of dipalmitoylphosphatidylcholine (DPPC). The results indicate that cationic angiotensin III transfer can be facilitated by the interfacial formation of a complex with DPPC. The complexation constant was determined by voltammetry and found to be equal to 5.2 x 10(4) M(-1). For neutral Leu-enkephalin, a current only observable in the presence of the lipidic monolayer results from the formation of a complex between the lithium cation, LeuEnk or LeuEnk dimer and the phospholipid. For both peptides, the peptide-lipid complexes were identified by biphasic electrospray ionization mass spectrometry using a setup consisting of a dual-channel microchip, which puts in contact two immiscible phases at the Taylor cone and makes possible the study of interfacial complexes. The stability of the 1:1 complexes between lysine, diphenylalanine, Ang III, and LeuEnk and DPPC were evaluated by varying the temperature of the heated capillary of the mass spectrometer. Finally, from the complementary use of voltammetry and mass spectrometry, a mechanism for the interaction between these two biologically relevant peptides and DPPC monolayers is formulated.