The impact of green roofs' composition on its overall life cycle.

Green roof systems have been developed to improve the environmental, economic, and social aspects of sustainability. Selecting the appropriate version of the green roof composition plays an important role in the life cycle assessment of a green roof. In this study, 10 compositions of an intensive green roof for moderate zone and 4 green roof compositions for different climatic conditions were designed and comprehensively assessed in terms of their environmental and economic impacts within the "Cradle-to-Cradle" system boundary. The assessment was carried out over a 50-year period for a moderate climate zone. The results showed that asphalt strips and concrete slab produced the highest total emissions. It was found that most greenhouse gases emissions were released in the operational energy consumption phase and in the production phase. The energy consumption phase (48.78%) for automatic irrigation and maintenance caused the highest Global Warming Potential (GWP) value (758.39 kg CO2e) in the worst variant, which also caused the highest life cycle cost (878.47€). On the contrary, in the best variant, planting more vegetation and lower maintenance and irrigation requirements led to a reduction in GWP (445.0 kg CO2e), but in terms of cost (506.6€) this composition didn't represent the best variant. The Global Warming Potential Biogenic (GWP-bio) compared to the Global Warming Potential Total (GWP-total) represents a proportion ranging from 0.8% to 78% depending on the proposed vegetation. Overall higher biogenic carbon values (up to 1525 kg CO2e) were observed for the proposed tall vegetation of Magnolia, Red Mulberry, Hawthorne, Cherry, and Crab-apple Tree. Based on the results of the multicriteria analysis, which included core environmental & economic parameters, biogenic carbon emission levels, the outcome of this paper proposed optimal green roof composition. Optimal intensive green roof composition was subjected to a sensitivity analysis to determine the impact of changing climatic conditions on CO2 emissions and life cycle costs. The results of the sensitivity analysis show that the optimal variant of the green roof can be implemented in the cold and subtropical zone with regard to CO2 emissions, but not with regard to life cycle costs.

Digital technologies (DTs) for safety education and training in construction.

BACKGROUND: Digital technologies (DTs) have gained recognition for educating and training individuals, covering multiple areas in construction sector to enhance safety performance. OBJECTIVE: The objective of this study was to conduct a systematic literature review (SLR) focusing on DTs utilized for safety education and training in the construction sector since 2000 and explore their various application areas. METHODS: Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were followed to conduct SLR and fifty-nine articles were identified. This study describes the research trends through bibliometric analysis, encompassing aspects such as annual publication counts, document sources, influential authors and documents, countries of origin, and prevalent research areas. RESULTS: The results revealed that immersive virtual reality (VR) technology has seen extensive utilization in educating and training individuals. In the context of application areas, most DTs concentrated on augmenting individuals' proficiency in recognizing hazards. CONCLUSION: The findings summarized the primary research domains, deliberated upon prevailing research gaps, and proposed forthcoming directions for applying DTs in safety training. The suggested future directions can potentially enhance safety training effectiveness within the construction firm.

Simulation-Based Solutions Reducing Soil and Groundwater Contamination from Fertilizers in Arid and Semi-Arid Regions: Case Study the Eastern Nile Delta, Egypt.

Intensive agriculture requires increasing application of fertilizers in order to sustain food production. Improper use of these substances in combination with increasing seawater intrusion results in long-term and nonpoint soil and groundwater contamination. In this work, a 3-D groundwater and solute transport numerical model was created to simulate the effect of excessive fertilizers application along the Bahr El Baqar drain system, in the eastern Nile Delta, Egypt. The geotechnical properties of the soils, hydrologic parameters, and unconfined compressive strength were determined at different sites and used as input parameters for the model. Model results showed that silty clay soils are able to contain the contaminations and preserve the groundwater quality. Nevertheless, sandy soils primarily located at the beginning of the Bahr El Baqar drain allow leakage of fertilizers to the groundwater. Thus, fertilizer application should be properly managed in the top sandy layers to protect the groundwater and soil, as increasing aquifer by excess irrigation water increased the groundwater contamination in confined layers due to the high value of cumulative salt for the current situation while the unconfined zone decreased groundwater and soil contamination. A mass transport 3-D multi-species (MT3D) model was set to identify the optimal measure to tackle soil and groundwater contamination along the Bahr El-Baqar drain system. A potential increase of the abstraction rates in the study area has a positive impact in reducing the transfer of fertilizer contamination to groundwater while it has a negative impact for soil contamination. The scenario analysis further indicated that the installation of a drainage network decreases the groundwater and soil contamination. Both solutions are potentially effective for protection against nonpoint contamination along the Bahr El Baqar drain system. However, a more sustainable management approach of fertilizer application is needed to adequately protect the receptors located further downstream in the Nile Delta.