Variable-temperature lightwave-driven scanning tunneling microscope with a compact, turn-key terahertz source.

We report on a lightwave-driven scanning tunneling microscope based on a home-built microscope and a compact, commercial, and cost-effective terahertz-generation unit with a repetition rate of 100 MHz. The measurements are performed in an ultrahigh vacuum at temperatures between 8.5 and 300 K. The cross-correlation of the pump and probe pulses indicates a temporal resolution on the order of a picosecond. In terms of spatial resolution, CO molecules, step edges, and atomically resolved terraces are readily observed in terahertz images, with sometimes better contrast than in the topographic and (DC) current channels. The utilization of a compact, turn-key terahertz-generation system requires only limited experience with optics and terahertz generation, which may facilitate the deployment of the technique to further research groups.

Dynamics of contact electrification.

Although the electrical charging of objects brought into contact has been observed for at least 2000 years, the details of the underlying mechanism are still not yet fully understood. The present paper deals with the very basic process of contact electrification between two metals. We have developed an experimental method to follow the charge of a small sphere bouncing on a grounded planar electrode on a time scale down to 1 µs. It reveals that the sphere is discharged in the moment of contact, which lasts about 6 to 8 µs. However, at the very moment of disruption of the electrical contact, it regains charge far beyond the expectation according to the contact potential difference. The excess charge rises with increasing contact area.

Controlling the Oxidation of Magnetic and Electrically Conductive Solid-Solution Iron-Rhodium Nanoparticles Synthesized by Laser Ablation in Liquids.

This study focuses on the synthesis of FeRh nanoparticles via pulsed laser ablation in liquid and on controlling the oxidation of the synthesized nanoparticles. Formation of monomodal γ-FeRh nanoparticles was confirmed by transmission electron microscopy (TEM) and their composition confirmed by atom probe tomography (APT). For these particles, three major contributors to oxidation were analysed: (1) dissolved oxygen in the organic solvents, (2) the bound oxygen in the solvent and (3) oxygen in the atmosphere above the solvent. The decrease of oxidation for optimized ablation conditions was confirmed through energy-dispersive X-ray (EDX) and Mössbauer spectroscopy. Furthermore, the time dependence of oxidation was monitored for dried FeRh nanoparticles powders using ferromagnetic resonance spectroscopy (FMR). By magnetophoretic separation, B2-FeRh nanoparticles could be extracted from the solution and characteristic differences of nanostrand formation between γ-FeRh and B2-FeRh nanoparticles were observed.

Three dimensional tracing of a charged particle by electrostatic detection.

Using a configuration of electrodes connected to charge sensitive amplifiers, the position of a charged particle in free space can be determined in all three dimensions. In our experiment, spheres with a diameter of a millimeter and a charge of about 0.1 pC are traced while they are bouncing at a surface. A spatial resolution of about 0.5 mm combined with a temporal resolution better than 10 µs is achieved. Moreover, the transfer of electric charges when touching a surface can be evaluated.

Electrometer with sub-attoampere current load.

By cooling a conventional junction field-effect transistor below 150 K, a simple and versatile electrometer with extremely high impedance can be realized. At operating condition, the leakage current to the gate amounts to a few hundredths of an attoampere. The electrometer can be used from DC up to a frequency of 10 kHz. Without reduction of the bandwidth, a sensitivity of a few µV is obtained. Working at low frequencies, currents as low as a few attoamperes can be detected. If the input voltage is out of the operational range, the forward current or the Zener current of the gate junction protects the transistor against destructive charging.

Following the steps of a reaction by direct imaging of many individual molecules.

The dehydrogenation and dechlorination of FeOEP-Cl on Cu(111) has been studied in detail by scanning tunneling microscopy. Although, it is not possible to follow the reaction of an individual molecule, the complete pathway of the reaction with 22 inequivalent intermediate states and the rates of the involved processes are revealed. This is achieved by combining the analysis of a large data set showing thousands of molecules in the different stages of the reaction with numerical simulations.

Probing the electronic transport on the reconstructed Au/Ge(001) surface.

By using scanning tunnelling potentiometry we characterized the lateral variation of the electrochemical potential µec on the gold-induced Ge(001)-c(8 × 2)-Au surface reconstruction while a lateral current flows through the sample. On the reconstruction and across domain boundaries we find that µec shows a constant gradient as a function of the position between the contacts. In addition, nanoscale Au clusters on the surface do not show an electronic coupling to the gold-induced surface reconstruction. In combination with high resolution scanning electron microscopy and transmission electron microscopy, we conclude that an additional transport channel buried about 2 nm underneath the surface represents a major transport channel for electrons.

Surface-induced dechlorination of FeOEP-Cl on Cu(111).

To be or not to be chlorinated: When octaethylporphyrin iron(III) chloride (FeOEP-Cl) molecules are sublimated onto Cu(111) surfaces, two different molecular species are observed through scanning tunneling microscopy, showing either a protrusion or a depression at the center. In combination with van der Waals-corrected density functional calculations, our experiments reveal that one species corresponds to FeOEP-Cl molecules with the chlorine atom pointing away from the surface, whereas the other species has been dechlorinated.

Interplay between forward and backward scattering of spin-orbit split surface states of Bi(111).

The electronic structure at the surface of Bi(111) enables us to study the effect of defects scattering into multiple channels. By performing scanning tunneling spectroscopy near step edges, we analyze the resulting oscillations in the local density of electronic states (LDOS) as function of position. At a given energy, forward and backward scattering not only occur simultaneously but may contribute to the same scattering vector Δk. If the scattering phase of both processes differs by π and the amplitudes are almost equal, the oscillations cancel out. A sharp dip in the magnitude of the Fourier transform of the LDOS marks the crossover between forward and backward scattering channels.

[Dietary supplement of iron for iron deficiency]. / Kosttilskudd med jern ved jernmangel.

BACKGROUND: A low supply of iron in the diet may result in iron deficiency and mild iron-deficiency anaemia in healthy individuals. Women are more susceptible than men because of menstrual iron loss. We compared the effect of a low dose of iron, administered as a dietary supplement, with a high pharmacological dose of iron to otherwise healthy individuals with iron deficiency and mild iron deficiency anaemia. MATERIAL AND METHOD: In a randomised, double-blind trial conducted in 2000-2001, 73 women and three men with iron deficiency received either 27.6 mg of iron consisting of ferrous fumarate enriched with 13% haem iron, or 100 mg ferrosulphate daily for 12 weeks. Blood samples were analysed four times in the course of the treatment. RESULTS: The median ferritin value rose by 13 and 7 µg/l in the high-dose and low-dose group, respectively. The increase in ferritin was significantly higher in the high-dose than in the low dose group ( < 0.001). There was no statistically significant difference between the groups in the change in Hb, serum-iron or serum-iron binding capacity. The median haemoglobin value increased by 0.4 g/100 ml in both groups. Gastrointestinal side effects were experienced by 58% in the high-dose group and 35% in the low-dose group. Four subjects in the high-dose group and one in the low-dose group broke off the treatment because of side effects. INTERPRETATION: A supplement of low-dose iron is enough to increase iron stores in cases of nutritional iron deficiency in healthy individuals and to optimise haemoglobin. High-dose iron caused the largest increase in iron stores. Low-dose iron resulted in the least side effects.

Imaging the dynamics of individually adsorbed molecules.

Although noise is observed in many experiments, it is rarely used as a source of information. However, valuable information can be extracted from noisy signals. The motion of particles on a surface induced, for example, by thermal activation or by the interaction with the tip of a scanning tunnelling microscope may lead to fluctuations or switching of the tunnelling current. The analysis of these processes gives insight into dynamics on a single atomic or molecular level. Unfortunately, scanning tunnelling microscopy (STM) is not a useful tool to study dynamics in detail, as it is an intrinsically slow technique. Here, we show that this problem can be solved by providing a full real-time characterization of random telegraph noise in the current signal. The hopping rate, the noise amplitude and the relative occupation of the involved states are measured as a function of the tunnelling parameters, providing spatially resolved maps. In contrast to standard STM, our technique gives access to transiently populated states revealing an electron-driven hindered rotation between the equilibrium and two metastable positions of an individually adsorbed molecule. The new approach yields a complete characterization of copper phthalocyanine molecules on Cu(111), ranging from dynamical processes on surfaces to the underlying electronic structure on the single-molecule level.

Electron transport at surfaces and interfaces.

Here we present two techniques which give insight on transport phenomena with atomic resolution. Ballistic electron emission microscopy is used to study the ballistic transport through layered heterogeneous systems. The measured ballistic fraction of the tunneling current provides information about lossless transport channels through metallic layers and organic adsorbates. The transport characteristics of Bi(111)/Si Schottky devices and the influence of the organic adsorbates perylene tetracaboxylic dianhydride acid and C(60) on the ballistic current are discussed. Scanning tunneling potentiometry gives access to the lateral transport along a surface, thus scattering processes within two-dimensional electron systems for the Bi(111) surface and the Si(111)(√3 × âˆš3)-Ag surface could be visualized.

A measurement of the hysteresis loop in force-spectroscopy curves using a tuning-fork atomic force microscope.

Measurements of the frequency shift versus distance in noncontact atomic force microscopy (NC-AFM) allow measurements of the force gradient between the oscillating tip and a surface (force-spectroscopy measurements). When nonconservative forces act between the tip apex and the surface the oscillation amplitude is damped. The dissipation is caused by bistabilities in the potential energy surface of the tip-sample system, and the process can be understood as a hysteresis of forces between approach and retraction of the tip. In this paper, we present the direct measurement of the whole hysteresis loop in force-spectroscopy curves at 77 K on the PTCDA/Ag/Si(111) √3 × âˆš3 surface by means of a tuning-fork-based NC-AFM with an oscillation amplitude smaller than the distance range of the hysteresis loop. The hysteresis effect is caused by the making and breaking of a bond between PTCDA molecules on the surface and a PTCDA molecule at the tip. The corresponding energy loss was determined to be 0.57 eV by evaluation of the force-distance curves upon approach and retraction. Furthermore, a second dissipation process was identified through the damping of the oscillation while the molecule on the tip is in contact with the surface. This dissipation process occurs mainly during the retraction of the tip. It reaches a maximum value of about 0.22 eV/cycle.

Understanding dissipative tip-molecule interactions with submolecular resolution on an organic adsorbate.

Three-dimensional force spectroscopy measurements on 3,4,9,10-perylene-tetra-carboxylic dianhydride adsorbed on Ag(111) are combined with first-principles calculations to characterize the dissipative tip-molecule interactions with submolecular resolution. The experiments reveal systematic differences between the energy dissipation at the end groups and the center of the molecules that change with the tip-sample distance. Guided by the strength of the experimental conservative forces, an Ag-contaminated Si tip is identified as the likely tip termination in the experiments. Based on this tip configuration, the energy dissipation in the tip-sample contact is determined from the approach and retraction force curves calculated as a function of distance for different molecule sites. These calculations provide an explanation for the experimental trends in terms of the competition between localized dissipation mechanisms involving the quite mobile oxygen atoms on the sides of the molecule, and global molecular deformations involving the more rigid perylene core. The results confirm that the observed dissipation can be explained in terms of adhesion hysteresis and show the power of combined experimental-theoretical spectroscopy studies in the characterization of the underlying microscopic mechanisms.

Spring constant of a tuning-fork sensor for dynamic force microscopy.

We present an overview of experimental and numerical methods to determine the spring constant of a quartz tuning fork in qPlus configuration. The simple calculation for a rectangular cantilever is compared to the values obtained by the analysis of the thermal excitation and by the direct mechanical measurement of the force versus displacement. To elucidate the difference, numerical simulations were performed taking account of the real geometry including the glue that is used to mount the tuning fork.

Soil microbes and soil respiration of Mongolian Steppe soils under grazing stress.

Soils of Northern China were analysed for their microbiological and soil physical properties with respect to different grazing stress. An important factor for this is soil compaction and related aeration due to pore size shifts. Bulk density increases significantly with increasing grazing intensity and soil carbon contents show decreasing values from top to depth. Organic carbon (LOI) concentrations decrease significantly with increasing grazing intensity. The data on LOI (2-5.8%) approximate 10-30 mg C, our data on glucose show values between 0.4-1.2 mg, i.e. approx. 4% of total carbon. Numbers and biomass of bacteria show generally a decreasing trend of those data at grazed and ungrazed sites, numbers range between 0.4 and 8.7 x10(8) g(-1) d.wt., bacterial biomass between 0.4 and 3.8 microg Cg(-1). This need to be recorded in relation to soil compaction and herewith-hampered aeration and nutrient flow. The temperature-respiration data also allow getting an idea of the Q10-values for soil respiration. The data are between 2.24 (5-15 degrees C) and 1.2 (25-35 degrees C). Our data are presented with a general review of biological properties of Mongolian Steppe soils.

Temperature dependence of the energy dissipation in dynamic force microscopy.

The dissipation of energy in dynamic force microscopy is usually described in terms of an adhesion hysteresis mechanism. This mechanism should become less efficient with increasing temperature. To verify this prediction we have measured topography and dissipation data with dynamic force microscopy in the temperature range from 100 K up to 300 K. We used 3,4,9,10-perylenetetracarboxylic-dianhydride (PTCDA) grown on KBr(001), both materials exhibiting a strong dissipation signal at large frequency shifts. At room temperature, the energy dissipated into the sample (or tip) is 1.9 eV/cycle for PTCDA and 2.7 eV/cycle for KBr, respectively, and is in good agreement with an adhesion hysteresis mechanism. The energy dissipation over the PTCDA surface decreases with increasing temperature, yielding a negative temperature coefficient. For the KBr substrate, we find the opposite behaviour: an increase of dissipated energy with increasing temperature. While the negative temperature coefficient in the case of PTCDA agrees rather well with the adhesion hysteresis model, the positive slope found for KBr points to a hitherto unknown dissipation mechanism.

Ballistic electron microscopy of individual molecules.

We analyzed the transport of ballistic electrons through organic molecules on uniformly flat surfaces of bismuth grown on silicon. For the fullerene C60 and for a planar organic molecule (3,4,9,10-perylene-tetracarboxylic acid dianhydride), the signals revealed characteristic submolecular patterns that indicated where ballistic transport was enhanced or attenuated. The transport was associated to specific electronic molecular states. At electron energies of a few electron volts, this "scanning near-field electron transmission microscopy" method could be applied to various adsorbates or thin layers.