The propensity for covalent organic frameworks to template polymer entanglement.

The introduction of molecularly woven three-dimensional (3D) covalent organic framework (COF) crystals into polymers of varying types invokes different forms of contact between filler and polymer. Whereas the combination of woven COFs with amorphous and brittle polymethyl methacrylate results in surface interactions, the use of the liquid-crystalline polymer polyimide induces the formation of polymer-COF junctions. These junctions are generated by the threading of polymer chains through the pores of the nanocrystals, thus allowing for spatial arrangement of polymer strands. This offers a programmable pathway for unthreading polymer strands under stress and leads to the in situ formation of high-aspect-ratio nanofibrils, which dissipate energy during the fracture. Polymer-COF junctions also strengthen the filler-matrix interfaces and lower the percolation thresholds of the composites, enhancing strength, ductility, and toughness of the composites by adding small amounts (~1 weight %) of woven COF nanocrystals. The ability of the polymer strands to closely interact with the woven framework is highlighted as the main parameter to forming these junctions, thus affecting polymer chain penetration and conformation.

Crystalline Polyphenylene Covalent Organic Frameworks.

The synthesis of crystalline polyphenylene covalent organic frameworks (COFs) was accomplished by linking fluorinated tris(4-acetylphenyl)benzene building units using aldol cyclotrimerization. The structures of the two COFs, reported here, were confirmed by powder X-ray diffraction techniques, Fourier transform infrared, and solid-state 13C CP/MAS NMR spectroscopy. The results showed that the COFs were porous and chemically stable in corrosive, harsh environments for at least 1 week. Accordingly, postsynthetically modified derivatives of these COFs using primary amines showed CO2 uptake from air and flue gas.

High-yield, green and scalable methods for producing MOF-303 for water harvesting from desert air.

Metal-organic frameworks (MOFs) are excellent candidates for water harvesting from desert air. MOF-303 (Al(OH)(PZDC), where PZDC is 1-H-pyrazole-3,5-dicarboxylate), a robust and water-stable MOF, is a particularly promising water-harvesting sorbent that can take up water at low relative humidity and release it under mild heating. Accordingly, development of a facile, high-yield synthesis method for its production at scale is highly desirable. Here we report detailed protocols for the green, water-based preparation of MOF-303 on both gram and kilogram scales. Specifically, four synthetic methods (solvothermal, reflux, vessel and microwave), involving different equipment requirements, are presented to guarantee general accessibility. Typically, the solvothermal method takes ~24 h to synthesize MOF-303, while the reflux and vessel methods can reduce the time to 4-8 h. With the microwave-assisted method, the reaction time can be further reduced to just 5 min. In addition, we provide guidance on the characterization of MOF-303, as well as water-harvesting MOFs in general, to ensure high quality of the product in terms of its purity, crystallinity, porosity and water uptake. Furthermore, to address the need for future commercialization of this material, we demonstrate that our protocol can be employed to produce 3.5 kg per batch with a yield of 91%. MOF-303 synthesized at this large scale shows similar crystallinity and water uptake capacity compared to the respective material produced at a small scale. Our synthetic procedure is green and water-based, and can produce the MOF within hours.

Atomic-resolution structures from polycrystalline covalent organic frameworks with enhanced cryo-cRED.

The pursuit of atomic precision structure of porous covalent organic frameworks (COFs) is the key to understanding the relationship between structures and properties, and further developing new materials with superior performance. Yet, a challenge of how to determine their atomic structures has always existed since the first COFs reported seventeen years ago. Here, we present a universal method for ab initio structure determination of polycrystalline three-dimensional (3D) COFs at atomic level using enhanced cryo-continuous rotation electron diffraction (cryo-cRED), which combines hierarchical cluster analysis with cryo-EM technique. The high-quality datasets possess not only up to 0.79-angstrom resolution but more than 90% completeness, leading to unambiguous solution and precise refinement with anisotropic temperature factors. With such a powerful method, the dynamic structures with flexible linkers, degree of interpenetration, position of functional groups, and arrangement of ordered guest molecules are successfully revealed with atomic precision in five 3D COFs, which are almost impossible to be obtained without atomic resolution structure solution. This study demonstrates a practicable strategy for determining the structures of polycrystalline COFs and other beam-sensitive materials and to help in the future discovery of novel materials on the other.

Diverse crystal size effects in covalent organic frameworks.

Crystal size effect is of vital importance in materials science by exerting significant influence on various properties of materials and furthermore their functions. Crystal size effect of covalent organic frameworks (COFs) has never been reported because their controllable synthesis is difficult, despite their promising properties have been exhibited in many aspects. Here, we report the diverse crystal size effects of two representative COFs based on the successful realization of crystal-size-controlled synthesis. For LZU-111 with rigid spiral channels, size effect reflects in pore surface area by influencing the pore integrity, while for flexible COF-300 with straight channels, crystal size controls structural flexibility by altering the number of repeating units, which eventually changes sorption selectivity. With the understanding and insight of the structure-property correlation not only at microscale but also at mesoscale for COFs, this research will push the COF field step forward to a significant advancement in practical applications.

Design of higher valency in covalent organic frameworks.

The valency (connectivity) of building units in covalent organic frameworks (COFs) has been primarily 3 and 4, corresponding to triangles and squares or tetrahedrons, respectively. We report a strategy for making COFs with valency 8 (cubes) and "infinity" (rods). The linker 1,4-boronophenylphosphonic acid-designed to have boron and phosphorus as an isoelectronic combination of carbon-group elements-was condensed into a porous, polycubane structure (BP-COF-1) formulated as (-B4P4O12-)(-C6H4-)4 It was characterized by x-ray powder diffraction techniques, which revealed cubes linked with phenyls. The isoreticular forms (BP-COF-2 to 5) were similarly prepared and characterized. Large single crystals of a constitutionally isomeric COF (BP-COF-6), composed of rod units, were also synthesized using the same strategy, thus propelling COF chemistry into a new valency regime.

Non-Interpenetrated Single-Crystal Covalent Organic Frameworks.

Growth of covalent organic frameworks (COFs) as single crystals is extremely challenging. Inaccessibility of open-structured single-crystal COFs prevents the exploration of structure-oriented applications. Herein we report for the first time a non-interpenetrated single-crystal COF, LZU-306, which possesses the open structure constructed exclusively via covalent assembly. With a high void volume of 80 %, LZU-306 was applied to investigate the intrinsic dynamics of reticulated tetraphenylethylene (TPE) as the individual aggregation-induced-emission moiety. Solid-state 2 H NMR investigation has determined that the rotation of benzene rings in TPE, being the freest among the reported cases, is as fast as 1.0×104  Hz at 203 K to 1.5×107  Hz at 293 K. This research not only explores a new paradigm for single-crystal growth of open frameworks, but also provides a unique matrix-isolation platform to reticulate functional moieties into a well-defined and isolated state.

Rational Manipulation of Stacking Arrangements in Three-Dimensional Zeolites Built from Two-Dimensional Zeolitic Nanosheets.

Unit-cell-thin zeolitic nanosheets have emerged as fascinating materials for catalysis and separation. The controllability of nanosheet stacking is extremely challenging in the chemistry of two-dimensional zeolitic materials. To date, the organization of zeolitic nanosheets in hydrothermal synthesis has been limited by the lack of tunable control over the guest-host interactions between organic structure-directing agents (OSDAs) and zeolitic nanosheets. A direct synthetic methodology is reported that enables systematic manipulation of the aluminosilicate MWW-type nanosheet stacking. Variable control of guest-host interactions is rationally achieved by synergistically altering the charge density of OSDAs and synthetic silica-to-alumina composition. These finely controlled interactions allow successful preparation of a series of three-dimensional (3D) zeolites, with MWW-layer stacking in wide ranges from variably disorder to fully ordered, leading to tunable catalytic activity in the cracking reaction. These results highlight unprecedented opportunities to modulate zeolitic nanosheets arrangement in 3D zeolites whose structure can be tailored for catalysis and separation.

Single crystal of a one-dimensional metallo-covalent organic framework.

Although polymers have been studied for well over a century, there are few examples of covalently linked polymer crystals synthesised directly from solution. One-dimensional (1D) covalent polymers that are packed into a framework structure can be viewed as a 1D covalent organic framework (COF), but making a single crystal of this has been elusive. Herein, by combining labile metal coordination and dynamic covalent chemistry, we discover a strategy to synthesise single-crystal metallo-COFs under solvothermal conditions. The single-crystal structure is rigorously solved using single-crystal electron diffraction technique. The non-centrosymmetric metallo-COF allows second harmonic generation. Due to the presence of syntactic pendant amine groups along the polymer chains, the metallopolymer crystal can be further cross-linked into a crystalline woven network.

Isostructural Three-Dimensional Covalent Organic Frameworks.

Herein, we reported the designed synthesis of three isostructural three-dimensional covalent organic frameworks (3D COFs) with -H, -Me, or -F substituents, which have similar crystallinity and topology. Their crystal structures were determined by continuous rotation electron diffraction (cRED), and all three 3D COFs were found to adopt a fivefold interpenetrated pts topology. More importantly, the resolution of these cRED datasets reached up to 0.9-1.0 Å, enabling the localization of all non-hydrogen atomic positions in a COF framework directly by 3D ED techniques for the first time. In addition, the precise control of the pore environments through the use of different functional groups led to different selectivities for CO2 over N2 . We have thus confirmed that polycrystalline COFs can be definitely studied to the atomic level as other materials, and this study should also inspire the design and synthesis of 3D COFs with tailored pore environments for interesting applications.

"On Water" Direct Organocatalytic Cyanoarylmethylation of Isatins for the Diastereoselective Synthesis of 3-Hydroxy-3-cyanomethyl Oxindoles.

An "on water" organocatalytic cyanoarylmethylation of aryl acetonitrile to isatins is developed, giving products in high yields and up to excellent diastereoselectivities. A remarkable enhancement of reaction rates and diastereoselectivities by water was observed under mild conditions. Moreover, this approach provides a highly efficient and environmentally benign access to thermodynamic 3-hydroxy-3-cyanomethyl oxindoles.

Hydroxyl free radical route to the stable siliceous Ti-UTL with extra-large pores for oxidative desulfurization.

A facile and mild method was successfully developed to prepare the stable, highly siliceous Ti-UTL zeolite with extra-large pores. The hydroxyl free radical (˙OH) was introduced for the first time to effectively promote the isomorphous substitution of Si for framework Ge under room temperature and neutral conditions, resulting in a stable titanosilicate with an outstanding catalytic activity for oxidative desulfurization.

Single-crystal x-ray diffraction structures of covalent organic frameworks.

The crystallization problem is an outstanding challenge in the chemistry of porous covalent organic frameworks (COFs). Their structural characterization has been limited to modeling and solutions based on powder x-ray or electron diffraction data. Single crystals of COFs amenable to x-ray diffraction characterization have not been reported. Here, we developed a general procedure to grow large single crystals of three-dimensional imine-based COFs (COF-300, hydrated form of COF-300, COF-303, LZU-79, and LZU-111). The high quality of the crystals allowed collection of single-crystal x-ray diffraction data of up to 0.83-angstrom resolution, leading to unambiguous solution and precise anisotropic refinement. Characteristics such as degree of interpenetration, arrangement of water guests, the reversed imine connectivity, linker disorder, and uncommon topology were deciphered with atomic precision-aspects impossible to determine without single crystals.

Observation of Interpenetration Isomerism in Covalent Organic Frameworks.

We report herein the first example of interpenetration isomerism in covalent organic frameworks (COFs). As a well-known three-dimensional (3D) COF, COF-300 was synthesized and characterized by the Yaghi group in 2009 as a 5-fold interpenetrated diamond structure ( dia-c5 topology). We found that adding an aging process prior to the reported synthetic procedure afforded the formation of an interpenetration isomer, dia-c7 COF-300. The 7-fold interpenetrated diamond structure of this new isomer was identified by powder X-ray diffraction and rotation electron diffraction analyses. Furthermore, we proposed a universal formula to accurately determine the number of interpenetration degrees of dia-based COFs from only the unit cell parameters and the length of the organic linker. This work not only provides a novel example to the category of interpenetration isomerism but also provides new insights for the further development of 3D COFs.