Catalyst Design for Rh-Catalyzed Arene and Alkane C-H Borylation: The NHC Affects the Induction Period, and Indenyl is Superior to Cp.

In order to establish design criteria for Rh C-H borylation catalysts, analogues of the successful catalyst [Rh(Ind)(SIDipp)(COE)] (Ind = η5-indenyl, SIDipp = 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene, and COE = cis-cyclooctene) were synthesized by changing the indenyl and carbene ligands. [RhCp(SIDipp)(COE)] (1) formed alongside the C-C activated, cyclometalated byproduct [RhCp(κ2CAr,Ccarbene-SIDipp')(iPr)] (rac-2; SIDipp' = 1-(6-isopropylphenyl)-3-(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene). Computational modeling of COE dissociation showed that both C-C and C-H activation of the SIDipp aryl group is thermally attainable and reversible under experimental conditions, with the C-C activation products being the more thermodynamically stable species. Oxidative addition of 1 with SiH(OEt)3 gave the Rh silyl hydride [RhCp(H){Si(OEt)3}(SIDipp)] (rac-3). [Rh(Ind)(IDipp)(COE)] (4; IDipp = 1,3-bis(2,6-diisopropylphenyl)-imidazole-2-ylidene), the carbonyl analogue [Rh(Ind)(IDipp)(CO)] (5; νCO = 1940 cm-1, cf. 1944 cm-1 for [Rh(Ind)(SIDipp)(COE)]), and [Rh(Ind)(IMe4)(COE)] (6; IMe4 = 1,3,4,5-tetramethylimidazol-2-ylidene) were also characterized, but attempts to synthesize Rh carbene complexes with fluorenyl or 1,2,3,4-tetrahydrofluorenyl ligands were not successful. For the catalytic C-H borylation of benzene using B2pin2, 1 was inactive at 80 °C, and [Rh(Ind)(SIDipp)(COE)] was superior to all other complexes tested due to the shortest induction period. However, the addition of HBpin to precatalyst 4 eliminated the induction period. Catalytic n-alkane C-H borylation using [Rh(Ind)(NHC)(COE)] gave yields of up to 21% alkylBpin, but [RhCp*(C2H4)2] was the better catalyst.

A Gold(I)-Acetylene Complex Synthesised using Single-Crystal Reactivity.

Using single-crystal to single-crystal solid/gas reactivity the gold(I) acetylene complex [Au(L1)(η2-HC≡CH)][BArF4] is cleanly synthesized by addition of acetylene gas to single crystals of [Au(L1)(CO)][BArF4] [L1 = tris-2-(4,4'-di-tert-butylbiphenyl)phosphine, ArF = 3,5-(CF3)2C6H3]. This simplest gold-alkyne complex has been characterized by single crystal X-ray diffraction, solution and solid-state NMR spectroscopy and periodic DFT. Bonding of HC≡CH with [Au(L1)]+ comprises both σ-donation and π-backdonation with additional dispersion interactions within the cavity-shaped phosphine.

Transition Metal-Free Catalytic C-H Zincation and Alumination.

C-H metalation is the most efficient method to prepare aryl-zinc and -aluminium complexes that are ubiquitous nucleophiles. Virtually all C-H metalation routes to form Al/Zn organometallics require stoichiometric, strong Brønsted bases with no base-catalyzed reactions reported. Herein we present a catalytic in amine/ammonium salt (Et3N/[(Et3N)H]+) C-H metalation process to form aryl-zinc and aryl-aluminium complexes. Key to this approach is coupling an endergonic C-H metalation step with a sufficiently exergonic dehydrocoupling step between the ammonium salt by-product of C-H metalation ([(Et3N)H]+) and a Zn-H or Al-Me containing complex. This step, forming H2/MeH, makes the overall cycle exergonic while generating more of the reactive metal electrophile. Mechanistic studies supported by DFT calculations revealed metal-specific dehydrocoupling pathways, with the divergent reactivity due to the different metal valency (which impacts the accessibility of amine-free cationic metal complexes) and steric environment. Notably, dehydrocoupling in the zinc system proceeds through a ligand-mediated pathway involving protonation of the ß-diketiminate Cγ position. Given this process is applicable to two disparate metals (Zn and Al), other main group metals and ligand sets are expected to be amenable to this transition metal-free, catalytic C-H metalation.

Contrasting reactivity of B-Cl and B-H bonds at [Ni(IMes)2] to form unsupported Ni-boryls.

[Ni(IMes)2] reacts with chloroboranes via oxidative addition to form rare unsupported Ni-boryls. In contrast, the oxidative addition of hydridoboranes is not observed and products from competing reaction pathways are identified. Computational studies relate these differences to the mechanism of oxidative addition: B-Cl activation proceeds via nucleophilic displacement of Cl-, while B-H activation would entail high energy concerted bond cleavage.

Effect of α-Substitution on the Reactivity of C(sp3)-H Bonds in Pd0-Catalyzed C-H Arylation.

We report mechanistic studies on the reactivity of different α-substituted C(sp3)-H bonds, -CHnR (R = H, Me, CO2Me, CONMe2, OMe, and Ph, as well as the cyclopropyl and isopropyl derivatives -CH(CH2)2 and -CHMe2) in the context of Pd0-catalyzed C(sp3)-H arylation. Primary kinetic isotope effects, kH/kD, were determined experimentally for R = H (3.2) and Me (3.5), and these, along with the determination of reaction orders and computational studies, indicate rate-limiting C-H activation for all substituents except when R = CO2Me. This last result was confirmed experimentally (kH/kD ∼ 1). A reactivity scale for C(sp3)-H activation was then determined: CH2CO2Me > CH(CH2)2 ≥ CH2CONMe2 > CH3 ≫ CH2Ph > CH2Me > CH2OMe ≫ CHMe2. C-H activation involves AMLA/CMD transition states featuring intramolecular O → H-C H-bonding assisted by C-H → Pd agostic bonding. The "AMLA coefficient", χ, is introduced to quantify the energies associated with these interactions via natural bond orbital 2nd order perturbation theory analysis. Higher barriers correlate with lower χ values, which in turn signal a greater agostic interaction in the transition state. We believe that this reactivity scale and the underlying factors that determine this will be of use for future studies in transition-metal-catalyzed C(sp3)-H activation proceeding via the AMLA/CMD mechanism.

The Photochemical Mediated Ring Contraction of 4H-1,2,6-Thiadiazines To Afford 1,2,5-Thiadiazol-3(2H)-one 1-Oxides.

1,2,6-Thiadiazines treated with visible light and 3O2 under ambient conditions are converted into difficult-to-access 1,2,5-thiadiazole 1-oxides (35 examples, yields of 39-100%). Experimental and theoretical studies reveal that 1,2,6-thiadiazines act as triplet photosensitizers that produce 1O2 and then undergo a chemoselective [3 + 2] cycloaddition to give an endoperoxide that ring contracts with selective carbon atom excision and complete atom economy. The reaction was optimized under both batch and continuous-flow conditions and is also efficient in green solvents.

In crystallo lattice adaptivity triggered by solid-gas reactions of cationic group 7 pincer complexes.

The group 7 complexes [M(κ3-2,6-(R2PO)2C5H3N)(CO)2L][BArF4] [M = Mn, R = iPr, L = THF; M = Re, R = tBu, L = vacant site] undergo in crystallo solid-gas reactivity with CO to form the products of THF substitution or CO addition respectively. There is a large, local, adaptive change of [BArF4] anions for M = Mn, whereas for M = Re the changes are smaller and also remote to the site of reactivity.

Mechanism of Cu-Catalyzed Iododeboronation: A Description of Ligand-Enabled Transmetalation, Disproportionation, and Turnover in Cu-Mediated Oxidative Coupling Reactions.

We report a combined experimental and computational study of the mechanism of the Cu-catalyzed arylboronic acid iododeboronation reaction. A combination of structural and density functional theory (DFT) analyses has allowed determination of the identity of the reaction precatalyst with insight into each step of the catalytic cycle. Key findings include a rationale for ligand (phen) stoichiometry related to key turnover events-the ligand facilitates transmetalation via H-bonding to an organoboron boronate generated in situ and phen loss/gain is integral to the key oxidative events. These data provide a framework for understanding ligand effects on these key mechanistic processes, which underpin several classes of Cu-mediated oxidative coupling reactions.

Stability and C-H Bond Activation Reactions of Palladium(I) and Platinum(I) Metalloradicals: Carbon-to-Metal H-Atom Transfer and an Organometallic Radical Rebound Mechanism.

One-electron oxidation of palladium(0) and platinum(0) bis(phosphine) complexes enables isolation of a homologous series of linear d9 metalloradicals of the form [M(PR3)2]+ (M = Pd, Pt; R = tBu, Ad), which are stable in 1,2-difluorobenzene (DFB) solution for >1 day at room temperature when partnered with the weakly coordinating [BArF4]- (ArF = 3,5-(CF3)2C6H3) counterion. The metalloradicals exhibit reduced stability in THF, decreasing in the order palladium(I) > platinum(I) and PAd3 > PtBu3, especially in the case of [Pt(PtBu3)2]+, which is converted into a 1:1 mixture of the platinum(II) complexes [Pt(PtBu2CMe2CH2)(PtBu3)]+ and [Pt(PtBu3)2H]+ upon dissolution at room temperature. Cyclometalation of [Pt(PtBu3)2]+ can also be induced by reaction with the 2,4,6-tri-tert-butylphenoxyl radical in DFB, and a common radical rebound mechanism involving carbon-to-metal H-atom transfer and formation of an intermediate platinum(III) hydride complex, [Pt(PtBu2CMe2CH2)H(PtBu3)]+, has been substantiated by computational analysis. Radical C-H bond oxidative addition is correlated with the resulting MII-H bond dissociation energy (M = Pt > Pd), and reactions of the metalloradicals with 9,10-dihydroanthracene in DFB at room temperature provide experimental evidence for the proposed C-H bond activation manifold in the case of platinum, although conversion into platinum(II) hydride derivatives is considerably faster for [Pt(PtBu3)2]+ (t1/2 = 1.2 h) than [Pt(PAd3)2]+ (t1/2 ∼ 40 days).

A comparison of non-covalent interactions in the crystal structures of two σ-alkane complexes of Rh exhibiting contrasting stabilities in the solid state.

Non-covalent interactions surrounding the cationic Rh σ-alkane complexes within the crystal structures of [(Cy2PCH2CH2PCy2)Rh(NBA)][BArF4], [1-NBA][BArF4] (NBA = norbornane, C7H12; ArF = 3,5-(CF3)2C6H3), and [1-propane][BArF4] are analysed using Quantum Theory of Atoms in Molecules (QTAIM) and Independent Gradient Model approaches, the latter under a Hirshfeld partitioning scheme (IGMH). In both structures the cations reside in an octahedral array of [BArF4]- anions within which the [1-NBA]+ cation system exhibits a greater number of C-H⋯F contacts to the anions. QTAIM and IGMH analyses indicate these include the strongest individual atom-atom non-covalent interactions between the cation and the anion in these systems. The IGMH approach highlights the directionality of these C-H⋯F contacts that contrasts with the more diffuse C-H⋯π interactions. The accumulative effects of the latter lead to a more significant stabilizing contribution. IGMH %δGatom plots provide a particularly useful visual tool to identify key interactions and highlight the importance of a -{C3H6}- propylene moiety that is present within both the propane and NBA ligands (the latter as a truncated -{C3H4}- unit) and the cyclohexyl rings of the phosphine substituents. The potential for this to act as a privileged motif that confers stability on the crystal structures of σ-alkane complexes in the solid-state is discussed. The greater number of C-H⋯F inter-ion interactions in the [1-NBA][BArF4] system, coupled with more significant C-H⋯π interactions are all consistent with greater non-covalent stabilisation around the [1-NBA]+ cation. This is also supported by larger computed δGatom indices as a measure of cation-anion non-covalent interaction energy.

Understanding and Expanding Zinc Cation/Amine Frustrated Lewis Pair Catalyzed C-H Borylation.

[(NacNac)Zn(DMT)][B(C6F5)4], 1, (NacNac = {(2,6- i Pr2H3C6)N(CH3)C}2CH), DMT = N,N-dimethyl-4-toluidine), was synthesized via two routes starting from either (NacNac)ZnEt or (NacNac)ZnH. Complex 1 is an effective (pre)catalyst for the C-H borylation of (hetero)arenes using catecholborane (CatBH) with H2 the only byproduct. The scope included weakly activated substrates such as 2-bromothiophene and benzothiophene. Computational studies elucidated a plausible reaction mechanism that has an overall free energy span of 22.4 kcal/mol (for N-methylindole borylation), consistent with experimental observations. The calculated mechanism starting from 1 proceeds via the displacement of DMT by CatBH to form [(NacNac)Zn(CatBH)]+, D, in which CatBH binds via an oxygen to zinc which makes the boron center much more electrophilic based on the energy of the CatB-based LUMO. Combinations of D and DMT act as a frustrated Lewis pair (FLP) to effect C-H borylation in a stepwise process via an arenium cation that is deprotonated by DMT. Subsequent B-H/[H-DMT]+ dehydrocoupling and displacement from the coordination sphere of zinc of CatBAr by CatBH closes the cycle. The calculations also revealed a possible catalyst decomposition pathway involving hydride transfer from boron to zinc to form (NacNac)ZnH which reacts with CatBH to ultimately form Zn(0). In addition, the key rate-limiting transition states all involve the base, thus fine-tuning of the steric and electronic parameters of the base enabled a further minor enhancement in the C-H borylation activity of the system. Outlining the mechanism for all steps of this FLP-mediated process will facilitate the development of other main group FLP catalysts for C-H borylation and other transformations.

Experimental and Computational Studies of Ruthenium Complexes Bearing Z-Acceptor Aluminum-Based Phosphine Pincer Ligands.

Reaction of [Ru(C6H4PPh2)2(Ph2PC6H4AlMe(THF))H] with CO results in clean conversion to the Ru-Al heterobimetallic complex [Ru(AlMePhos)(CO)3] (1), where AlMePhos is the novel P-Al(Me)-P pincer ligand (o-Ph2PC6H4)2AlMe. Under photolytic conditions, 1 reacts with H2 to give [Ru(AlMePhos)(CO)2(µ-H)H] (2) that is characterized by multinuclear NMR and IR spectroscopies. DFT calculations indicate that 2 features one terminal and one bridging hydride that are respectively anti and syn to the AlMe group. Calculations also define a mechanism for H2 addition to 1 and predict facile hydride exchange in 2 that is also observed experimentally. Reaction of 1 with B(C6F5)3 results in Me abstraction to form the ion pair [Ru(AlPhos)(CO)3][MeB(C6F5)3] (4) featuring a cationic [(o-Ph2PC6H4)2Al]+ ligand, [AlPhos]+. The Ru-Al distance in 4 (2.5334(16) Å) is significantly shorter than that in 1 (2.6578(6) Å), consistent with an enhanced Lewis acidity of the [AlPhos]+ ligand. This is corroborated by a blue shift in both the observed and computed νCO stretching frequencies upon Me abstraction. Electronic structure analyses (QTAIM and EDA-ETS) comparing 1, 4, and the previously reported [Ru(ZnPhos)(CO)3] analogue (ZnPhos = (o-Ph2PC6H4)2Zn) indicate that the Lewis acidity of these pincer ligands increases along the series ZnPhos < AlMePhos < [AlPhos]+.

Single-Crystal to Single-Crystal Addition of H2 to [Ir(iPr-PONOP)(propene)][BArF 4] and Comparison Between Solid-State and Solution Reactivity.

The reactivity of the Ir(I) PONOP pincer complex [Ir(iPr-PONOP)(η2-propene)][BArF 4], 6, [iPr-PONOP = 2,6-(iPr2PO)2C6H3N, ArF = 3,5-(CF3)2C6H3] was studied in solution and the solid state, both experimentally, using molecular density functional theory (DFT) and periodic-DFT computational methods, as well as in situ single-crystal to single-crystal (SC-SC) techniques. Complex 6 is synthesized in solution from sequential addition of H2 and propene, and then the application of vacuum, to [Ir(iPr-PONOP)(η2-COD)][BArF 4], 1, a reaction manifold that proceeds via the Ir(III) dihydrogen/dihydride complex [Ir(iPr-PONOP)(H2)H2][BArF 4], 2, and the Ir(III) dihydride propene complex [Ir(iPr-PONOP)(η2-propene)H2][BArF 4], 7, respectively. In solution (CD2Cl2) 6 undergoes rapid reaction with H2 to form dihydride 7 and then a slow (3 d) onward reaction to give dihydrogen/dihydride 2 and propane. DFT calculations on the molecular cation in solution support this slow, but productive, reaction, with a calculated barrier to rate-limiting propene migratory insertion of 24.8 kcal/mol. In the solid state single-crystals of 6 also form complex 7 on addition of H2 in an SC-SC reaction, but unlike in solution the onward reaction (i.e., insertion) does not occur, as confirmed by labeling studies using D2. The solid-state structure of 7 reveals that, on addition of H2 to 6, the PONOP ligand moves by 90° within a cavity of [BArF 4]- anions rather than the alkene moving. Periodic DFT calculations support the higher barrier to insertion in the solid state (ΔG ‡ = 26.0 kcal/mol), demonstrating that the single-crystal environment gates onward reactivity compared to solution. H2 addition to 6 to form 7 is reversible in both solution and the solid state, but in the latter crystallinity is lost. A rare example of a sigma amine-borane pincer complex, [Ir(iPr-PONOP)H2(η1-H3B·NMe3)][BArF 4], 5, is also reported as part of these studies.

Dehydropolymerization of H3B·NMeH2 Mediated by Cationic Iridium(III) Precatalysts Bearing κ3- i Pr-PN R P Pincer Ligands (R = H, Me): An Unexpected Inner-Sphere Mechanism.

The dehydropolymerization of H3B·NMeH2 to form N-methylpolyaminoborane using neutral and cationic catalysts based on the {Ir( i Pr-PNHP)} fragment [ i Pr-PNHP = κ3-(CH2CH2P i Pr2)2NH] is reported. Neutral Ir( i Pr-PNHP)H3 or Ir( i Pr-PNHP)H2Cl precatalysts show no, or poor and unselective, activity respectively at 298 K in 1,2-F2C6H4 solution. In contrast, addition of [NMeH3][BArF 4] (ArF = 3,5-(CF3)2C6H3) to Ir( i Pr-PNHP)H3 immediately starts catalysis, suggesting that a cationic catalytic manifold operates. Consistent with this, independently synthesized cationic precatalysts are active (tested between 0.5 and 2.0 mol % loading) producing poly(N-methylaminoborane) with M n ∼ 40,000 g/mol, D ∼1.5, i.e., dihydrogen/dihydride, [Ir( i Pr-PNHP)(H)2(H2)][BArF 4]; σ-amine-borane [Ir( i Pr-PNHP)(H)2(H3B·NMe3)][BArF 4]; and [Ir( i Pr-PNHP)(H)2(NMeH2)][BArF 4]. Density functional theory (DFT) calculations probe hydride exchange processes in two of these complexes and also show that the barrier to amine-borane dehydrogenation is lower (22.5 kcal/mol) for the cationic system compared with the neutral system (24.3 kcal/mol). The calculations show that the dehydrogenation proceeds via an inner-sphere process without metal-ligand cooperativity, and this is supported experimentally by N-Me substituted [Ir( i Pr-PNMeP)(H)2(H3B·NMe3)][BArF 4] being an active catalyst. Key to the lower barrier calculated for the cationic system is the outer-sphere coordination of an additional H3B·NMeH2 with the N-H group of the ligand. Experimentally, kinetic studies indicate a complex reaction manifold that shows pronounced deceleratory temporal profiles. As supported by speciation and DFT studies, a key observation is that deprotonation of [Ir( i Pr-NHP)(H)2(H2)][BArF 4], formed upon amine-borane dehydrogenation, by the slow in situ formation of NMeH2 (via B-N bond cleavage), results in the formation of essentially inactive Ir( i Pr-PNHP)H3, with a coproduct of [NMeH3]+/[H2B(NMeH2)2]+. While reprotonation of Ir( i Pr-PNHP)H3 results in a return to the cationic cycle, it is proposed, supported by doping experiments, that reprotonation is attenuated by entrainment of the [NMeH3]+/[H2B(NMeH2)2]+/catalyst in insoluble polyaminoborane. The role of [NMeH3]+/[H2B(NMeH2)]+ as chain control agents is also noted.

Synthesis, characterisation and reactivity of group 2 complexes with a thiopyridyl scorpionate ligand.

Herein we report the reactivity of the proligand tris(2-pyridylthio)methane (HTptm) with various Alkaline Earth (AE) reagents: (1) dialkylmagnesium reagents and (2) AE bis-amides (AE = Mg-Ba). Heteroleptic complexes of general formulae [Mg(Tptm)(R)] (R = Me, nBu; Tptm = {C(S-C5H4N)3}-) and [AE(Tptm)(N'')] (AE = Mg-Ba; N'' = {N(SiMe3)2}-) were targeted from the reaction of HTptm with R2Mg or [AE(N'')2]2. Reaction of the proligand with dialkylmagnesium reagents led to formation of [{Mg(κ3C,N,N-C{Bu}{S-C5H4N}2)(µ-S-C5H4N)}2] (1) and [{Mg(κ3C,N,N-C{Me}{S-C5H4N}2)(µ-OSiMe3)}2] (2) respectively, as a result of a novel transfer of an alkyl group onto the methanide carbon with concomitant C-S bond cleavage. However, reactivity of bis-amide precursors for Mg and Ca did afford the target species [AE(Tptm)(N'')] (3-AE; AE = Mg-Ca), although these proved susceptible to ligand degradation processes. DFT calculations show that alkyl transfer in the putative [Mg(Tptm)(nBu)] (1m') system and amide transfer in 3-Ca is a facile process that induces C-S bond cleavage in the Tptm ligand. 3-Mg and 3-Ca were also tested as catalysts for the hydrophosphination of selected alkenes and alkynes, including the first example of mono-hydrophosphination of 4-ethynylpyridine which was achieved with high conversions and excellent regio- and stereochemical control.

Nucleophilic Fluorination Catalyzed by a Cyclometallated Rhodium Complex.

Quantitative catalytic nucleophilic fluorination of a range of acyl chlorides to acyl fluorides was promoted by a cyclometallated rhodium complex [(η5,κ2C-C5Me4CH2C6F5CH2NC3H2NMe)- RhCl] (1). 1 can be prepared in high yields from commercially available starting materials using a one-pot method. The catalyst could be separated, regenerated, and reused. Rapid quantitative fluorination generated the fluoride analogue of the active pharmaceutical ingredient probenecid. Infrared in situ monitoring verified the clean conversion of the substrates to products. VTNA graphical kinetic analysis and DFT calculations lead to a postulated reaction mechanism involving a nucleophilic Rh-F bond.