National Beef Quality Audit - 2016: Survey of carcass characteristics through instrument grading assessments.

The instrument grading assessment portion of the National Beef Quality Audit (NBQA) - 2016 allows the unique opportunity to evaluate beef carcass traits over the course of a year. One week of instrument grading data was collected each month from 5 beef processing corporations encompassing 18 facilities from January 2016 through December 2016 ( = 4,544,635 carcasses). Mean USDA yield grade (YG) was 3.1 with 1.37 cm fat thickness (FT), 88.9 cm LM area, 393.6 kg HCW, and 2.1% KPH. Frequency distribution of USDA YG was 9.5% YG 1, 34.6% YG 2, 38.8% YG 3, 14.6% YG 4, and 2.5% YG 5. Increases in HCW and FT since the NBQA-2011 were major contributors to differences in mean YG and the (numerically) increased frequency of YG 3, 4, and 5 carcasses found in the current audit. Mean marbling score was Small, and the distribution of USDA quality grades was 4.2% Prime, 71.4% Choice, 21.7% Select, and 2.7% other. Frequency of carcasses grading Prime on Monday (6.43%) was numerically higher than the average frequency of carcasses grading Prime overall (4.2%). Monthly HCW means were 397.6 kg in January, 397.2 kg in February, 396.5 kg in March, 389.3 kg in April, 384.8 kg in May, 385.0 kg in June, 386.1 kg in July, 394.1 kg in August, 399.1 kg in September, 403.9 kg in October, 406.5 kg in November, and 401.9 kg in December. Monthly mean marbling scores were Small in January, Small in February, Small in March, Small in April, Small in May, Small in June, Small in July, Small in August, Small in September, Small in October, Small in November, and Small in December. Both mean HCW and mean marbling score declined in the months of May and June. The month with the greatest numerical frequency of dark cutters was October (0.74%). Comparison of overall data from in-plant carcass and instrument grading assessments revealed close alignment of information, especially for YG (3.1 for in-plant assessment versus 3.1 for instrument grading) and marbling (Small for in-plant assessment versus Small for instrument grading). These findings allow the beef industry access to the greatest volume of beef value-determining characteristics for the U.S. fed steer and heifer population than ever reported, resulting in potentially more precise targeting of future quality and consistency efforts.

National Beef Quality Audit-2016: In-plant survey of carcass characteristics related to quality, quantity, and value of fed steers and heifers.

The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.

National Beef Quality Audit-2016: Transportation, mobility, and harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and by-products.

The National Beef Quality Audit-2016 (NBQA-2016) was conducted to assess current transportation, mobility, and quality characteristics of U.S. fed steers and heifers. Data were collected at 17 beef processing facilities between March and November 2016. About 8,000 live cattle were evaluated for transportation and mobility, and about 25,000 carcasses were evaluated on the slaughter floor. Cattle were in transit to the slaughter facility for a mean duration of 2.7 h from a mean distance of 218.5 km using trailers with dimensions ranging from 17.84 m2 to 59.09 m2. Area allotted per animal averaged 1.13 m2 and ranged from 0.85 m2 to 2.28 m2. A total of 96.8% of cattle received a mobility score of 1 (walks easily, no apparent lameness). Identification types (35.1% had multiple) were lot visual tags (61.5%), individual tags (55.0%), electronic tags (16.9%), metal-clip tags (9.2%), bar-coded tags (0.05%), wattles (0.01%), and other (2.6%). Cattle were black-hided (57.8%), Holstein (20.4%), red-hided (10.5%), yellow-hided (4.8%), gray-hided (2.9%), brown-hided (1.3%), and white-hided (1.1%). Unbranded hides were observed on 74.3% of cattle; 18.6% had brands located on the butt, 6.3% on the side, and 1.3% on the shoulder (values exceed 100% due to multiple brands). For hide-on carcasses, 37.7% displayed no mud or manure; specific locations for mud or manure were legs (40.8%), belly (33.0%), tail region (15.5%), side (6.8%), and top-line (3.9%). Cattle without horns represented 83.3% of the sample, and cattle that did have horns measured: < 2.54 cm (5.5%), 2.54 to 12.7 cm (8.3%), and > 12.7 cm (2.9%). Carcasses without bruises represented 61.1% of those sampled, whereas 28.2% had 1, 8.2% had 2, 2.1% had 3, and 0.3% had 4 bruises. Of those carcasses with a bruise, the bruise was located on the loin (29.7%), round (27.8%), chuck (16.4%), rib (14.4%), and brisket/plate/flank (11.6%). Frequencies of offal condemnations were livers (30.8%), lungs (18.2%), viscera (16.3%), hearts (11.1%), heads (2.7%), and tongues (2.0%). Compared to NBQA-2011, fewer cattle were identified for traceability, fewer were black-hided, a greater number were Holstein cattle, more with no brand and no horns, fewer without bruises, more liver, lung, and viscera condemnations, and fewer heads and tongues were condemned. The NBQA remains an influential survey for the U.S. beef industry to provide benchmarks and strategic plans for continued improvement of beef quality and consistency.

National Beef Quality Audit-2016: Phase 1, Face-to-face interviews.

The National Beef Quality Audit (NBQA) is conducted every 5 yr and was most recently again conducted in 2016. Face-to-face interviews gauged progress in quality associated with live cattle production using procedures first utilized in NBQA 2011. The 2016 NBQA was the first in which interviews concerning fed steers and heifers were combined with an audit of market cow and bull beef. Face-to-face interviews were designed to illicit definitions for beef quality, estimate willingness to pay (WTP) for quality attributes, establish relative importance rankings for important quality factors, and assess images, strengths, weaknesses, potential threats, and shifting trends in the beef industry since the 2011 audit. Individuals making purchasing decisions in 5 market sectors of the steer/heifer and cow/bull beef supply chain were interviewed, including packers (n = 36), retailers (including large and small supermarket companies and warehouse food sales companies; n = 35), food service operators (including quick-serve, full-service, and institutional establishments; n = 29), further processors (n = 64), and peripherally-related government and trade organizations (GTO; n = 30). Face-to-face interviews were conducted between January and November of 2016 using a designed dynamic routing system. Definitions (as described by interviewees) for 7 pre-determined quality factors, including: (1) How and where the cattle were raised, (2) Lean, fat, and bone, (3) Weight and size, (4) Visual characteristics, (5) Food safety, (6) Eating satisfaction, and (7) Cattle genetics were recorded verbatim and categorized into similar responses for analysis. Compared to NBQA-2011, a higher percentage of companies were willing to pay premiums for guaranteed quality attributes, but overall were willing to pay lower average premiums than the companies interviewed in 2011. Food safety had the highest share of preference among all interviewees, generating a double-digit advantage over any other quality factor. The 2 beef industries have an overall positive image among interviewees, and despite lingering weaknesses, product quality continued to be at the forefront of the strengths category for both steer and heifer beef and market cow and bull beef.

National Beef Quality Audit-2016: Transportation, mobility, live cattle, and carcass assessments of targeted producer-related characteristics that affect value of market cows and bulls, their carcasses, and associated by-products.

The National Beef Quality Audit-2016 marks the fourth iteration in a series assessing the quality of live beef and dairy cows and bulls and their carcass counterparts. The objective was to determine the incidence of producer-related defects, and report cattle and carcass traits associated with producer management. Conducted from March through December of 2016, trailers (n = 154), live animals (n = 5,470), hide-on carcasses (n = 5,278), and hide-off hot carcasses (n = 5,510) were surveyed in 18 commercial packing facilities throughout the United States. Cattle were allowed 2.3 m2 of trailer space on average during transit indicating some haulers are adhering to industry handling guidelines for trailer space requirements. Of the mixed gender loads arriving at processing facilities, cows and bulls were not segregated on 64.4% of the trailers surveyed. When assessed for mobility, the greatest majority of cattle surveyed were sound. Since the inception of the quality audit series, beef cows have shown substantial improvements in muscle. Today over 90.0% of dairy cows are too light muscled. The mean body condition score for beef animals was 4.7 and for dairy cows and bulls was 2.6 and 3.3, respectively. Dairy cattle were lighter muscled, yet fatter than the dairy cattle surveyed in 2007. Of cattle surveyed, most did not have horns, nor any visible live animal defects. Unbranded hides were observed on 77.3% of cattle. Carcass bruising was seen on 64.1% of cow carcasses and 42.9% of bull carcasses. However, over half of all bruises were identified to only be minor in severity. Nearly all cattle (98.4%) were free of visible injection-site lesions. Current results suggest improvements have been made in cattle and meat quality in the cow and bull sector. Furthermore, the results provide guidance for continued educational and research efforts for improving market cow and bull beef quality.

Improving the lean muscle color of dark-cutting beef by aging, antioxidant-enhancement, and modified atmospheric packaging.

The objective was to evaluate the effects of wet-aging, rosemary-enhancement, and modified atmospheric packaging on the color of dark-cutting beef during simulated retail display. No-roll dark-cutting strip loins ( = 12; pH > 6.0) were selected from a commercial packing plant within 3 d postharvest. Using a balanced incomplete block design, dark-cutting loins were sectioned in half, and assigned to 1 of 3 aging periods: 7, 14, or 21 d. After respective aging, each aged section was divided into 3 equal parts, and randomly assigned to 1 of 3 enhancement treatments: nonenhanced dark-cutting, dark-cutter enhanced with 0.1% rosemary, and dark-cutter enhanced with 0.2% rosemary. Following enhancement, steaks were randomly assigned to 1 of 3 packaging treatments: high-oxygen modified atmospheric packaging (HiOx-MAP; 80% O and 20% CO), carbon monoxide modified atmospheric packaging (CO-MAP; 0.4% CO, 69.6% N, and 30% CO), and polyvinyl chloride overwrap (PVC; 20% O). Instrumental and visual color measurements were recorded during 5 d simulated retail display. Lipid oxidation was determined utilizing the thiobarbituric acid reactive substances (TBARS) method. There was a significant packaging × enhancement × display time interaction for values and chroma ( 0.001). On d 0 of display, dark-cutting steaks enhanced with 0.1% and 0.2% rosemary and packaged in HiOx-MAP had greater ( 0.001) values and chroma than other dark-cutting packaging/enhancement treatments. A significant packaging × enhancement × display time interaction resulted for values ( 0.001). Dark-cutting steaks enhanced with 0.2% rosemary and packaged in HiOx-MAP was lighter ( 0.001; greater values) than other dark-cutting treatments on d 5 of display. There were no differences ( 0.34) in discoloration scores on d 5 among different dark-cutting treatments when steaks were packaged in HiOx- and CO-MAP. There was an aging period × enhancement × packaging interaction ( < 0.0033) for lipid oxidation. On d 0 of display, there were no differences ( 0.54) in TBARS values between different aging periods and enhancement treatments. Dark-cutting steaks enhanced with 0.2% rosemary had lower ( 0.001) TBARS values than 0.1% rosemary on d 5 when aged for 21 d and in HiOx-MAP. The results suggest that rosemary enhancement with CO- or HiOx-MAP has the potential to improve the surface color of dark-cutting beef.

Effects of aging on the fundamental color chemistry of dark-cutting beef.

The objective of the current study was to evaluate the effects of aging on myoglobin chemistry of dark-cutting beef. Ten USDA Choice (mean pH = 5.6; normal pH beef) and 10 no-roll dark cutter (mean pH = 6.4) strip loins were obtained from a commercial packing plant within 3 d of harvest. Loins were cut into 4 sections, vacuum packaged, randomly assigned to 0-, 21-, 42-, and 62-d aging at 2°C in the dark. Following aging, loin sections were cut into 2.5-cm-thick steaks and were used to determine bloom development, oxygen consumption (OC), metmyoglobin reducing activity (MRA), and lipid oxidation. Surface color readings were measured using a HunterLab Miniscan XE Plus spectrophotometer. A significant muscle type × aging time interaction resulted for OC ( < 0.001). Normal pH steaks declined more ( < 0.001) in OC during aging than dark-cutting beef. On d 0, dark-cutting beef had a greater OC ( < 0.001) than normal pH beef. There was a significant muscle type × oxygenation time × aging period interaction for L* values, deoxymyoglobin (DeoxyMb), and oxymyoglobin (OxyMb). When dark-cutting sections were aged for 62 d, both 0 and 60 min bloom development L* values were greater ( < 0.0001) than 0 min dark-cutting sections aged for 21 or 42 d. At all aging periods, normal pH beef had greater OxyMb content and lower DeoxyMb ( < 0.0001) during bloom development than dark-cutting beef. An aging period × muscle type interaction was significant for % overall reflectance ( = 0.0017) and absorbance ( = 0.0038). Dark cutting and normal pH beef loin sections aged for 62 d had greater reflectance ( < 0.0001) than 21 d. On d 0, dark-cutting beef had greater ( < 0.0001) MRA than normal pH beef. There were no significant ( = 0.14) differences in MRA between 42 and 62 d between dark-cutting and normal pH beef. Dark cutting steaks had lower thiobarbituric acid reactive substances values ( < 0.0001) than normal pH steaks. The results indicate that characterizing the myoglobin chemistry during aging will help to design strategies to improve appearance of high pH beef.

Strategies to predict and improve eating quality of cooked beef using carcass and meat composition traits in Angus cattle.

Product quality is a high priority for the beef industry because of its importance as a major driver of consumer demand for beef and the ability of the industry to improve it. A 2-prong approach based on implementation of a genetic program to improve eating quality and a system to communicate eating quality and increase the probability that consumers' eating quality expectations are met is outlined. The objectives of this study were 1) to identify the best carcass and meat composition traits to be used in a selection program to improve eating quality and 2) to develop a relatively small number of classes that reflect real and perceptible differences in eating quality that can be communicated to consumers and identify a subset of carcass and meat composition traits with the highest predictive accuracy across all eating quality classes. Carcass traits, meat composition, including Warner-Bratzler shear force (WBSF), intramuscular fat content (IMFC), trained sensory panel scores, and mineral composition traits of 1,666 Angus cattle were used in this study. Three eating quality indexes, EATQ1, EATQ2, and EATQ3, were generated by using different weights for the sensory traits (emphasis on tenderness, flavor, and juiciness, respectively). The best model for predicting eating quality explained 37%, 9%, and 19% of the variability of EATQ1, EATQ2, and EATQ3, and 2 traits, WBSF and IMFC, accounted for most of the variability explained by the best models. EATQ1 combines tenderness, juiciness, and flavor assessed by trained panels with 0.60, 0.15, and 0.25 weights, best describes North American consumers, and has a moderate heritability (0.18 ± 0.06). A selection index (I= -0.5[WBSF] + 0.3[IMFC]) based on phenotypic and genetic variances and covariances can be used to improve eating quality as a correlated trait. The 3 indexes (EATQ1, EATQ2, and EATQ3) were used to generate 3 equal (33.3%) low, medium, and high eating quality classes, and linear combinations of traits that best predict class membership were estimated using a predictive discriminant analysis. The best predictive model to classify new observations into low, medium, and high eating quality classes defined by the EATQ1 index included WBSF, IMFC, HCW, and marbling score and resulted in a total error rate of 47.06%, much lower than the 60.74% error rate when the prediction of class membership was based on the USDA grading system. The 2 best predictors were WBSF and IMFC, and they accounted for 97.2% of the variability explained by the best model.

Effects of extended aging and modified atmospheric packaging on beef top loin steak color.

The objective of this study was to evaluate the effects of extended aging and modified atmospheric packaging on beef LM color. Using a randomized complete block design, each beef longissimus lumborum muscle ( = 10; USDA Choice, 3 d postmortem) was equally divided into 3 sections and randomly assigned to 1 of 3 aging periods (21, 42, or 62 d at 2°C). After respective aging, each loin section was cut into four 2.5-cm-thick steaks and randomly assigned to 1 of 3 packaging types (PVC, HiOx-MAP [80% oxygen and 20% carbon dioxide], or CO-MAP [0.4% carbon monoxide, 69.6% nitrogen, and 30% carbon dioxide]). The steaks were displayed under continuous fluorescent lighting for 6 d, and surface color was determined daily using a HunterLab Miniscan XE Plus spectrophotometer and a visual panel. The fourth steak was used to characterize oxygen consumption (OC), lipid oxidation, and metmyoglobin reducing activity (MRA) on 21, 42, and 62 d (before display). On d 6 display, MRA, OC, and lipid oxidation also were measured. An increase in aging time decreased ( < 0.0001) muscle pH. Loin sections aged for 42 and 62 d had a lower ( < 0.0002) pH compared with loin sections aged for 21 d. An aging period × packaging × display time interaction ( < 0.0001) resulted for a* values (redness), chroma, and visual color (muscle color and surface discoloration). As aging time increased, HiOx-MAP had the most discoloration ( < 0.0001) compared with other packaging types on d 6. At all aging periods, steaks packaged in CO-MAP had greater ( < 0.0001) MRA on d 6 than PVC and HiOx-MAP, whereas steaks packaged in HiOx-MAP had the least MRA ( < 0.0001). There were no differences ( = 0.34) in thiobarbituric acid reactive substances values between steaks aged for 21 and 42 d when steaks were packaged in CO-MAP and displayed for 6 d. However, steaks packaged in HiOx-MAP and displayed 6 d had greater ( < 0.0001) lipid oxidation than CO-MAP. Steaks packaged in HiOx-MAP had a lower ( < 0.0001) OC compared with PVC and CO-MAP when aged for 42 and 62 d. There were no differences ( = 0.49) in OC between steaks packaged in PVC and HiOx-MAP when aged for 21 d and displayed 6 d. The results indicate that extended aging is detrimental to color stability when packaged in PVC and HiOx-MAP. However, steaks in CO-MAP had stable red color during display. Decreased color stability in PVC and HiOx-MAP could be associated, in part, with decreased MRA and OC.

The effects of technology use in feedlot production systems on feedlot performance and carcass characteristics.

The objectives of this study were to examine the effects of feedlot production systems with and without the use of a ß-adrenergic agonist compared to an all-natural production program on feedlot performance and carcass characteristics. Crossbred beef steers ( = 336; initial BW = 379 ± 8 kg) were randomized to 1 of 3 treatments in a randomized complete block design (RCBD; 14 steers/pen; 8 pens/treatment). Treatments consisted of an all-natural treatment (NAT), a conventional treatment (CONV), and a conventional treatment with a ß-agonist (CONV-Z). All treatments were fed the same basal diet with NAT cattle receiving no growth promoting technologies. The CONV and CONV-Z cattle were implanted with 40 mg of estradiol and 200 mg of trenbolone acetate (TBA) on d 0 and were fed 33 and 9 mg/kg of monensin and tylosin daily, respectively. The CONV-Z cattle were fed zilpaterol hydrochloride (ZH) at 6.76 mg/kg (90% DM basis) for the last 20 days on feed (DOF) There was no effect of treatment on DMI ( = 0.83); however, CONV-Z steers gained 3.8% faster (1.64 vs. 1.58 kg/d; < 0.01) and were 5.3% more efficient (0.160 vs. 0.152; < 0.01) than CONV steers, and CONV steers gained 32.8% faster (1.58 vs. 1.19 kg/d; < 0.01) and were 26.7% more efficient (0.152 vs. 0.120; < 0.01) than NAT steers. There was a 35.7% improvement in estimated carcass gain (1.29 vs. 0.95 kg/d; < 0.01) and a 32.6% improvement in carcass efficiency (0.126 vs. 0.095; < 0.01) for CONV-Z steers compared to NAT steers. Hot carcass weight was increased by 8 kg for CONV-Z steers compared to CONV steers (394 vs. 386 kg; = 0.05) and 46 kg compared to NAT steers (394 vs. 348 kg; < 0.01). Longissimus muscle area was increased by 3.6 cm for CONV-Z steers compared to CONV steers (92.29 vs. 88.67 cm; = 0.02) and 12.1 cm for CONV-Z steers compared to NAT steers (92.29 vs. 80.16 cm; < 0.01), resulting in a 9.6% unit increase in USDA yield grade (YG) 1 (15.14 vs. 5.52%; < 0.05) and a 21.6% unit reduction in USDA YG 3 for CONV-Z steers compared to CONV steers (30.70 vs. 52.32%; < 0.05). The CONV-Z steers had a lower marbling score compared to the other treatments (432; 0.01), resulting in an 11.7% unit increase (20.70 vs. 9.03%; < 0.05) in USDA Select carcasses compared to CONV steers. The results of this experiment show that CONV-Z and CONV production results in a significant improvement in feedlot performance and USDA YG compared to NAT.

Species-specific effects on non-enzymatic metmyoglobin reduction in vitro.

Our objectives were to determine the non-enzymatic metmyoglobin reduction properties of bovine, porcine, and equine myoglobins and to characterize the effects of pre-incubation of 4-hydroxy-2-nonenal (HNE) with myoglobins on non-enzymatic metmyoglobin reduction in vitro. Purified bovine, porcine, and equine metmyoglobins (0.05 mM) were reduced at pH 5.6 and 7.4 in the presence or absence of HNE. Rates of metmyoglobin reduction were monitored by spectrophotometry, and myoglobin adducts were characterized by high-resolution mass-spectrometry. Results showed that the species origins of individual myoglobins determined rates of non-enzymatic reduction (beef>equine>pork; P<0.05). Irrespective of species, pre-incubation of HNE myoglobin decreased non-enzymatic metmyoglobin reduction compared with control at both pH 5.6 and 7.4 (P<0.05). Mass spectrometric analysis revealed adducts of HNE with bovine, porcine, and equine myoglobins. The results indicate that the amino acid composition and the covalent binding of HNE with myoglobin can significantly decrease the ability of heme to accept electrons.

Genetic parameters for sensory traits in longissimus muscle and their associations with tenderness, marbling score, and intramuscular fat in Angus cattle.

The objective of this study was to estimate heritabilities for sensory traits and genetic correlations among sensory traits and with marbling score (MS), Warner-Bratzler shear force (WBSF), and intramuscular fat content (IMFC). Samples of LM from 2,285 Angus cattle were obtained and fabricated into steaks for laboratory analysis and 1,720 steaks were analyzed by a trained sensory panel. Restricted maximum likelihood procedures were used to obtain estimates of variance and covariance components under a multitrait animal model. Estimates of heritability for MS, IMFC, WBSF, tenderness, juiciness, and connective tissue traits were 0.67, 0.38, 0.19, 0.18, 0.06, and 0.25, respectively. The genetic correlations of MS with tenderness, juiciness, and connective tissue were estimated to be 0.57 ± 0.14, 1.00 ± 0.17, and 0.49 ± 0.13, all positive and strong. Estimated genetic correlations of IMFC with tenderness, juiciness, and connective tissue were 0.56 ± 0.16, 1.00 ± 0.21, and 0.50 ± 0.15, respectively. The genetic correlations of WBSF with tenderness, juiciness, and connective tissue were all favorable and estimated to be -0.99 ± 0.08, -0.33 ± 0.30 and -0.99 ± 0.07, respectively. Strong and positive genetic correlations were estimated between tenderness and juiciness (0.54 ± 0.28) and between connective tissue and juiciness (0.58 ± 0.26). In general, genetic correlations were large and favorable, which indicated that strong relationships exist and similar gene and gene networks may control MS, IMFC, and juiciness or WBSF, panel tenderness, and connective tissue. The results from this study confirm that MS currently used in selection breeding programs has positive genetic correlations with tenderness and juiciness and, therefore, is an effective indicator trait for the improvement of tenderness and juiciness in beef. This study also indicated that a more objective measure, particularly WBSF, a trait not easy to improve through phenotypic selection, is an excellent candidate trait for genomic selection aimed at improving eating satisfaction.

Effects of beef production system on animal performance and carcass characteristics.

The objective of this study was to evaluate conventional (CONV) and natural (NAT) beef production systems from annual pasture through finishing through grazing. Beef steers (n=180, initial BW=250±19 kg) were assigned randomly to 2 treatments in the pasture phase. Steers were implanted with 40 mg of trenbolone acetate (TBA), 8 mg estradiol, and 29 mg tylosin tartrate (CONV), or received no implant (NAT). Steers on the 2 treatments grazed wheat or cereal rye for 109 d. Conventional steers had an 18.5% improvement in ADG (1.22 vs. 1.03 kg/d, P<0.01) and a heavier final BW (385 vs. 366 kg, P<0.01) compared with NAT steers. Following the pasture phase, steers (n=160 steers, 5 steers/pen, 8 pens/treatment) were assigned to a 2×2 factorial in the feedlot phase. Production system (NAT vs. CONV) was maintained from the pasture phase, and the second factor was 7 vs. 12% low-quality roughage (DM basis, LOW vs. HIGH). During finishing, CONV steers were given 120 mg of TBA and 24 mg estradiol at processing, fed monensin and tylosin, and fed zilpaterol hydrochloride for the last 20 d of the experiment. There were no program×roughage level interactions (P>0.07). The CONV steers ate 6.9% more feed (11.8 vs. 11.0 kg/d, P<0.01), gained 28.4% faster (1.90 vs. 1.48 kg/d, P<0.01), and were 24.2% more efficient (0.164 vs. 0.132, P<0.01) compared with NAT steers. The LOW steers had greater G:F (0.153 vs. 0.144, P<0.01) compared with HIGH steers. There was a 28.3% improvement in estimated carcass weight gain (1.36 vs. 1.06 kg/d), 18.6% improvement in carcass efficiency (0.115 vs. 0.097, P<0.01), and 21.6% improvement (1.52 vs. 1.25 Mcal/kg, P<0.01) in calculated dietary NEg for CONV compared with NAT steers. Hot carcass weight was increased by 62 kg (424 vs. 362 kg, P<0.01) and LM area was increased by 16.9 cm2 (100.9 vs. 84.0 cm2, P<0.01), decreasing USDA yield grade (YG, 3.09 vs. 3.54, P<0.01) for CONV steers compared with NAT steers. Natural steers had a greater percentage of carcasses in the upper 2/3 of USDA Choice grade (48.7 vs. 18.7%, P<0.01), a greater percentage of YG 4 and 5 carcasses (25.4 vs. 9.3%, P<0.01), and a greater percentage of abscessed livers (39.6 vs. 10.5%, P<0.01) compared with CONV steers. The results show that CONV production results in more rapid and efficient production that resulted in heavier carcasses with superior YG and desirable quality grades with both roughage levels.

North American Beef Tenderness Survey 2011-2012: benchmarking tenderness and sample shipping procedures.

Fifty-four stores in 30 U.S. cities were sampled from June 2011 through May 2012 to benchmark beef tenderness at retail, as assessed by Warner-Bratzler shear force (WBSF). Top loin (Longissimus dorsi; n = 980) and sirloin (Gluteus medius and Biceps femoris; n = 860) steaks were collected at random (Quality Grade and brand) and shipped via overnight delivery to Colorado State University. From June 2011 through November 2011, North American Beef Tenderness Survey (NABTS) Period 1, samples were shipped fresh and then frozen. Mean WBSF values during Period 1 were 2.9 and 3.5 kg for top loin and sirloin steaks, respectively. Frequencies of steaks classified as tough (WBSF ≥ 4.4 kg) were 8.6% and 17.7% for top loin and sirloin steaks, respectively. When shipped fresh, a disproportionately high frequency (16.9%) of top loin steaks had WBSF ≤ 2.0 kg, representing a deviation from previous works. Two trials were conducted to assess the effect of freezing, retail display, and shipping on WBSF and slice shear force (SSF) of beef top loin steaks. Freezing, retail display, and shipment reduced WBSF by 0.4, 0.3, and 0.0 kg during Trial 1, and by 0.4, 0.3, and 0.1 kg during Trial 2. Slice shear force was lower (P < 0.05) in steaks exposed to shipping conditions during Trial 1; however, this difference was not observed in Trial 2. Shipping decreased the frequency of steaks categorized as tough (SSF ≥ 20.0 kg) from 11.1 to 5.7% and from 30.5 to 28.6%, during Trial 1 and 2, respectively. During Trial 1, WBSF indicated that shipping increased incidence of tough samples from 0.0 to 3.8%, but this trend was reversed during Trial 2 when shipping reduced incidence of tough samples from 13.0 to 5.6%. Coefficients of variation for treatment effects suggested variance remained unchanged (± 2.0%), with respect to shear force values. However, mean values were reduced as a result of shipping conditions. These findings dictated a change in NABTS protocol from December 2011 through May 2012 (Period 2), during which time samples were shipped frozen. Mean WBSF values were 3.4 and 4.0 kg for top loin and sirloin samples, respectively. Frequencies of steaks classified as tough were 14% and 23.5% for top loin and sirloin steaks, respectively. These findings suggest that freezing samples before shipment may influence shear force of steaks collected at the retail level. These data should be considered when evaluating beef tenderness surveys and in the design of future works.

Effect of rate of body weight gain in steers during the stocker phase. I. Growth, partitioning of fat among depots, and carcass characteristics of growing-finishing beef cattle.

Two experiments were conducted to examine the effect of growth rate to similar age or BW on fat deposition in stocker cattle grazing dormant native range (DNR) or winter wheat pasture (WP). In each experiment, fall-weaned Angus steers were randomly allotted to 1 of 4 stocker production programs: 1) control, 1.02 kg/d of a 40% CP cottonseed meal-based supplement during grazing of DNR (CON); 2) corn/soybean meal-based supplement fed at 1% of BW during grazing of DNR (CORN); 3) grazing WP at a high stocking rate to achieve a low rate of BW gain (LGWP); and 4) grazing WP at a low stocking rate to achieve a high rate of BW gain (HGWP). In Exp. 1, a subset of steers (3 steers per treatment) was harvested after winter grazing (138 d) at similar age. The remaining WP steers were transitioned into the finishing phase, whereas DNR steers were allowed to graze the same native range pastures for another 115 d without supplementation before entering the feedyard. In Exp. 2, steers grazed their respective pastures until each treatment reached an estimated HCW of 200 kg (262, 180, 142, and 74 d, respectively, for the CON, CORN, LGWP, and HGWP treatments), at which time a subset of steers (4 steers per treatment) were selected for intermediate harvest before finishing. In both experiments, the remaining steers were fed a finishing diet to a common 12th-rib fat thickness of 1.27 cm. In Exp. 1, winter grazing ADG was 0.19, 0.52, 0.68, and 1.37 ± 0.03 kg/d; and in Exp. 2, winter/summer grazing ADG was 0.46, 0.61, 0.83, and 1.29 ± 0.02 kg/d, respectively for CON, CORN, LGWP, and HGWP treatments. At intermediate harvest in Exp. 1, HGWP steers had greater (P < 0.01) 12th-rib fat thickness and marbling scores, compared with the other treatments. However, in Exp. 2, LGWP steers had greater (P < 0.01) marbling scores compared with HGWP steers, which were greater than DNR steers. At final harvest in Exp. 1, LGWP steers had greater (P < 0.01) 12th-rib fat thickness and smaller LM area, compared with the other treatments; however, there were no differences (P = 0.99) in final marbling scores. In Exp. 2, CON steers had lower (P < 0.05) 12th-rib fat thickness and tended (P = 0.10) to have greater marbling scores, compared with the other treatments. These data suggest that changes in the partitioning of fat among depots during the stocker phase may not be reflected after finishing when steers are fed to a common 12th-rib fat thickness.

Impact of health management, health treatments, and zilpaterol hydrochloride supplementation on carcass quality, color, and palatability traits in heifers.

Two hundred sixty-eight strip loins were collected from heifers fed at Oklahoma State University in Stillwater, OK. In Exp. 1, heifers (n = 127) were assigned to 1 of 3 health management treatment groups: antimicrobial administrations were given based on standard feedlot protocol (SFP) or ruminal temperature (RT) or given a metaphylactic treatment of tulathromycin (MT) followed by visual assessment (VA). In Exp. 2, heifers (n = 155) were assigned to the same treatment groups as above and were supplemented zilpaterol hydrochloride (ZH) or control (CON). Three steaks were collected from each strip loin, 1 each for retail display, sensory evaluation, and Warner-Bratzler shear force (WBSF). Color was evaluated from the retail display steak using a trained color panel and objectively using a HunterLab Miniscan XE. An Instron Universal Testing Machine with a Warner-Bratzler head was used for evaluation of instrumental tenderness, and a trained sensory panel was used to assess palatability traits. Heifers treated by VA had the least number of antimicrobial administrations and lowest yield grade and also had the lightest HCW (P < 0.05) compared with the heifers treated by the other health management protocols. There were no subjective color attribute differences or sensory panel differences (P > 0.05) across all health management systems or antimicrobial administrations. There were no differences in carcass and performance traits for any antimicrobial administrations treatment groups (P > 0.05). Heifers who had 0 or 1 antimicrobial administrations had lower (P < 0.05) a* (redness/greenness: positive values = red and negative values = green), and b* (yellowness/blueness: positive values = yellow and negative values = blue) values compared with those who had 2 antimicrobial administrations. In Exp. 2, heifers treated by VA had the least number (P < 0.05) of antimicrobial administrations when compared with MT and RT. Health management group did not have any other effects on carcass, sensory, or color attributes. Zilpaterol hydrochloride supplementation caused a decrease (P < 0.05) in internal fat and yield grade, but no interactions were observed between the number of antimicrobial administrations and ZH supplementation. With the supplementation of ZH, WBSF significantly increased (P < 0.05). At the end of retail display, the control group had a greater (P < 0.05) surface discoloration when compared with the ZH group. Treatment and detection of bovine respiratory diseases (BRD) is critical to the industry economically and results from this study show that different methods can be used to detect BRD without dramatically impacting carcass, sensory, and retail case life characteristics.

Effect of rate of body weight gain of steers during the stocker phase. II. Visceral organ mass and body composition of growing-finishing beef cattle.

Two experiments were conducted to examine the effect of rate of BW gain during the stocker phase on visceral organ mass and body composition of growing-finishing cattle that had grazed dormant native range (DNR) or winter wheat pasture (WP). In each experiment, fall-weaned steers were allotted randomly to 1 of these stocker production programs: 1) control, 1.02 kg · steer(-1) · d(-1) of a 40% CP cottonseed meal-based supplement during grazing of DNR (CON); 2) corn/soybean meal-based supplement fed at 1% of BW during grazing of DNR (CORN); 3) grazing WP at a high stocking rate to achieve a reduced rate of BW gain (LGWP); and 4) grazing WP at a low stocking rate to achieve an increased rate of BW gain (HGWP). In Exp. 1, 3 steers per treatment were harvested after winter grazing (138 d). The remaining WP steers were transitioned into a finishing phase and DNR steers were allowed to graze the same pastures for another 115 d before entering a feedyard. In Exp. 2, steers grazed respective pastures until each treatment reached an estimated HCW of 200 kg (262, 180, 142, and 74 d, respectively, for CON, CORN, LGWP, and HGWP treatments), at which time 4 steers per treatment were randomly selected for intermediate harvest before finishing. At the end of the finishing period, 4 additional steers from each treatment were randomly selected for final carcass measurements. All steers were fed to a common 12th rib fat thickness of 1.27 cm. After winter grazing in Exp. 1, HGWP steers had the greatest (P < 0.01) mesenteric/omental fat, total viscera, total splanchnic tissue mass, and carcass and empty body fat, compared with the other treatments. In Exp. 2 at intermediate harvest, WP steers had greater (P < 0.03) mesenteric/omental fat, total viscera, and total splanchnic tissue mass, compared with CORN steers, with CON steers being intermediate. Also, the WP steers had greater (P < 0.02) carcass and empty body fat, compared with CORN steers, with CON steers being intermediate. At final harvest in Exp. 2, LGWP steers had the least total viscera and total splanchnic tissue mass, compared with the other treatments. However, there were no differences (P > 0.53) among treatments for carcass or empty body fat. Stocker systems using WP or DNR result in cattle with differences in body fat and visceral organ mass before finishing; this may influence feedlot efficiency, even though there were no differences in body fat and visceral organ mass at the end of the finishing period.

Phase I of The National Beef Quality Audit-2011: quantifying willingness-to-pay, best-worst scaling, and current status of quality characteristics in different beef industry marketing sectors.

The National Beef Quality Audit (NBQA)-2011 benchmarked the current status of and assessed progress being made toward quality and consistency of U.S. cattle, carcasses, and beef products after the completion of the first NBQA in 1991. Unlike previous NBQA, objectives of the 2011 Phase I study were to determine how each beef market sector defined 7 quality categories, estimate willingness-to-pay (WTP) for the same quality categories by market sector, and establish a best-worst (B/W) scaling for the quality categories. Structured face-to-face interviews were conducted and responses were recorded using dynamic routing software over an 11-mo period (February to December 2011) with decision makers in each of the following beef market sectors: Feeders (n = 59), Packers (n = 26), Food Service, Distribution, and Further Processors (n = 48), Retailers (n = 30), and Government and Allied Industries (n = 47). All respondents participated in a structured interview consisting of WTP and B/W questions that were tied to 7 quality categories and then were asked to "define" each of the 7 categories in terms of what the category meant to them, resulting in completely unbiased results. The 7 quality categories were a) how and where the cattle were raised, b) lean, fat, and bone, c) weight and size, d) cattle genetics, e) visual characteristics, f) food safety, and g) eating satisfaction. Overall, "food safety" and "eating satisfaction" were the categories of greatest and second most importance, respectively, to all beef market sectors except for Feeders. Feeders ranked "how and where the cattle were raised" and "weight and size" as the most important and second most important, respectively. Overall, "how and where the cattle were raised" had the greatest odds of being considered a nonnegotiable requirement before the raw material for each sector would be considered for purchase and was statistically more important (P < 0.05) as a requirement for purchase than all other categories except "food safety." When all market sectors were considered, "eating satisfaction" was shown to generate the greatest average WTP percentage premium (11.1%), but that WTP premium value only differed statistically (P < 0.05) from "weight and size" (8.8%). Most notably, when a sector said that "food safety" was a nonnegotiable requirement, no sector was willing to purchase the product at a discounted price if the "food safety" of the product could not be assured.

The impact of postharvest interventions on the color stability and, subsequently, the palatability of beef from cattle fed wet distillers grain.

Two hundred forty heifers were fed at Oklahoma State University in Stillwater, OK, in 1 of 2 treatment groups: a dry rolled corn (CON) diet or a diet including 30% wet distillers grains plus solubles (WDGS). Chuck rolls (n = 60) and paired strip loins (n = 75 pairs; 38 CON and 37 WDGS) were collected from each treatment group and processed at 3 d and 14 d, respectively. After grinding, each chuck was separated into 8 polyvinyl chloride (PVC) film overwrapped packages and 8 high oxygen modified atmosphere packaging (MAP), each containing approximately 0.23 kg of ground beef, for evaluation by a trained color panel, a trained color panel and a trained sensory panel and for thiobarbituric acid reactive substance (TBARS) analysis. After 14 d, 1 strip loin from each pair was injected with an enhancement solution. Steaks from each strip loin were fabricated and packaged, one-half in PVC and one-half in MAP. In addition to the evaluation by trained color and sensory panels and TBARS analysis, steaks were subjected to instrumental color evaluation using a HunterLab Miniscan XE and Warner-Bratzler Shear Force analysis using an Instron Universal Testing Machine. Ground beef exhibited no significant differences in color between dietary treatments; however, sensory panelists did find MAP WDGS had less beefy flavor (P = 0.05) and more painty flavor (P = 0.01) intensities than the MAP CON ground beef. Cattle fed WDGS discolored more (P = 0.01) and had less bright steaks than cattle fed the CON when MAP and enhanced. Distillers fed, nonenhanced (nonE) MAP steaks were redder and yellower than control steaks (P < 0.05) on removal from simulated retail display. There were no other significant (P > 0.05) color differences between dietary treatments using any other combination of postharvest interventions. Sensory panel results indicated WDGS NE PVC products were juicier and more tender (P < 0.05), initially, and contained less connective tissue (5.3 ± 0.1, 5.5 ± 0.1, and 5.9 ± 0.4, respectively) than the steaks from CON carcasses (5.1 ± 0.1, 5.4 ± 0.1, and 5.8 ± 0.4, respectively). Although WDGS NE MAP steaks showed more oxidation than CON NE MAP steaks on removal from retail case, all TBAR values were well below a threshold of 1 mg malonaldehyde/kg. Essentially, MAP but not enhancing products from cattle fed WDGS may be the best way to maintain a visually appealing appearance in the retail case but at possible risk to product juiciness.

National Beef Tenderness Survey-2010: Warner-Bratzler shear force values and sensory panel ratings for beef steaks from United States retail and food service establishments.

The tenderness and palatability of retail and food service beef steaks from across the United States (12 cities for retail, 5 cities for food service) were evaluated using Warner-Bratzler shear (WBS) and consumer sensory panels. Subprimal postfabrication storage or aging times at retail establishments averaged 20.5 d with a range of 1 to 358 d, whereas postfabrication times at the food service level revealed an average time of 28.1 d with a range of 9 to 67 d. Approximately 64% of retail steaks were labeled with a packer/processor or store brand. For retail, top blade had among the lowest (P < 0.05) WBS values, whereas steaks from the round had the greatest (P < 0.05) values. There were no differences (P > 0.05) in WBS values between moist-heat and dry-heat cookery methods for the top round and bottom round steaks or between enhanced (contained salt or phosphate solution) or nonenhanced steaks. Food service top loin and rib eye steaks had the lowest (P < 0.05) WBS values compared with top sirloin steaks. Retail top blade steaks and food service top loin steaks received among the greatest (P < 0.05) consumer sensory panel ratings compared with the other steaks evaluated. Prime food service rib eye steaks received the greatest ratings (P < 0.05) for overall like, like tenderness, tenderness level, like juiciness, and juiciness level, whereas ungraded rib eye steaks received the lowest ratings (P < 0.05) for like tenderness and tenderness level. The WBS values for food service steaks were greater (P < 0.05) for the Select and ungraded groups compared with the Prime, Top Choice, and Low Choice groups. The WBS values and sensory ratings were comparable to the last survey, signifying that no recent or substantive changes in tenderness have occurred.