Unsymmetrical benzothiazole-based dithienylethene photoswitches.

Herein, we investigate the structure-property relationships in a new series of benzothiazole based unsymmetrical hexafluorocyclopentene dithienylethenes (DTEs) and compare the results with the known facts for symmetric diarylethenes (DAEs). We reveal high photocyclization efficiency resulting from a significant shift of ground state equilibrium to the antiparallel conformation and a barrierless excited state pathway to conical intersection, which remains unperturbed even in polar solvents for most of the prepared DTEs. Furthermore, we uncover that the rate of back thermal cycloreversion correlates clearly more with the central C-C bond-length in the transition state than with the central C-C bond-length in the ground state of the cyclic form. Finally, our detailed vibrational spectral analysis of studied DTEs points out significant changes in Raman and infrared spectra during photoswitching cycles which pave the way for a non-destructive readout of stored information.

Rapid sucrose monitoring in green coffee samples using multienzymatic biosensor.

Amperometric biosensor utilizing FAD-dependent glucose dehydrogenase (FAD-GDH) for a specific sucrose monitoring in green coffee is described. FAD-GDH was co-immobilized with invertase and mutarotase on a thin-layer gold planar electrode using chitosan. The biosensor showed a wide linearity (from 10 to 1200 µM), low detection limit (8.4 µM), fast response time (50 s), and appeared to be O2 independent. In addition the biosensors exhibited a good operational (3 days) and storage (1 year) stability. Finally, the results achieved from the biosensor measurements of sucrose in 17 samples of green coffee (Coffea arabica, C. canephora and C. liberica) were compared with those obtained by the standard HPLC method. The good correlation among results of real samples, satisfactory analytical performance and simple use of the presented biosensor make it suitable for application in coffee industry.

Monitoring of monosaccharides, oligosaccharides, ethanol and glycerol during wort fermentation by biosensors, HPLC and spectrophotometry.

The aim of the present study was to analyze sugar levels (namely maltose, maltotriose, glucose and fructose) and alcohols (ethanol and glycerol) during the fermentation process in wort samples by amperometric enzymatic biosensors developed by our research group for industrial application, HPLC and spectrophotometry, and to compare the suitability of the presented methods for determination of individual analytes. We can conclude that for the specific monitoring of maltose or maltotriose only the HPLC method was suitable. On the other hand, biosensors and spectrophotometry reflected a decrease in total sugar concentration better and were able to detect both glucose and fructose in the later stages of fermentation, while HPLC was not. This can be attributed to the low detection limits and good sensitivity of the proposed methods. For the ethanol and glycerol analysis all methods proved to be suitable. However, concerning the cost expenses and time analysis, biosensors represented the best option.

Amperometric glucose biosensor utilizing FAD-dependent glucose dehydrogenase immobilized on nanocomposite electrode.

Amperometric glucose biosensors utilizing commercially available FAD-dependent glucose dehydrogenases from two strains of Aspergillus species are described. Enzymes were immobilized on nanocomposite electrode consisting of multi-walled carbon nanotubes by entrapment between chitosan layers. Unlike the common glucose oxidase based biosensor, the presented biosensors appeared to be O(2)-independent. The optimal amount of enzymes, working potential and pH value of working media of the glucose biosensors were determined. The biosensor utilizing enzyme isolated from Aspergillus sp. showed linearity over the range from 50 to 960 µM and from 70 to 620 µM for enzyme from Aspergillus oryzae. The detection limits were 4.45 µM and 4.15 µM, respectively. The time of response was found to be 60 s. The biosensors showed excellent operational stability - no loss of sensitivity after 100 consecutive measurements and after the storage for 4 weeks at 4 °C in phosphate buffer solution. When biosensors were held in a dessicator at room temperature without use, they kept the same response ability at least after 6 months. Finally, the results obtained from measurements of beverages and wine samples were compared with those obtained with the enzymatic-spectrophotometric and standard HPLC methods, respectively. Good correlation between results in case of analysis of real samples and good analytical performance of presented glucose biosensor allows to use presented concept for mass production and commercial use.

Photophysical properties and photostability of novel benzothiazole-based D-π-A-π-D systems.

The photophysical properties and photochemical stability of two novel D-π-A-π-D systems based on a benzothiazole core and terminal N,N-dimethylaminophenyl and N,N-diphenylaminophenyl groups were investigated. The quantum yield of photoreactions (Φ) was determined for various oxygen concentrations in the solvent (CH2Cl2) and various irradiation wavelengths. Trans-cis photoisomerization is proposed as a photobleaching mechanism during irradiation at longer wavelength due to charge-transfer transitions. Solution deoxygenation led to an unusual decrease in the photostability of the compounds investigated, most likely because of cation radical formation. The population of higher excited states for short-wavelength irradiation opened another degradation pathway and the overall degradation percentage decreased in comparison with long-wavelength irradiation. We assume that photoisomerization of the second double bond and electron transfer to CH2Cl2 (and subsequent oxidation reactions) contribute to this slower degradation branch. Singlet oxygen contributes significantly, albeit to the smallest values of Φ, to the overall photodegradation for both types of irradiation.

New conjugated benzothiazole-N-oxides: synthesis and biological activity.

Eleven new 2-styrylbenzothiazole-N-oxides have been prepared by aldol - type condensation reactions between 2-methylbenzothiazole-N-oxide and para-substituted benzaldehydes. Compounds with cyclic amino substituents showed typical push-pull molecule properties. Four compounds were tested against various bacterial strains as well as the protozoan Euglena gracilis as model microorganisms. Unlike previously prepared analogous benzothiazolium salts, only weak activity was recorded.

Off-line FIA monitoring of D-sorbitol consumption during L-sorbose production using a sorbitol biosensor.

A ferricyanide mediated amperometric biosensor system implementing D-sorbitol dehydrogenase together with diaphorase for sensitive detection of D-sorbitol was used. The biosensor system was successfully integrated into an off-line FIA system with a throughput of detection of 10 h(-1). The device exhibited limit of detection of 20 microM with an average relative standard deviation of analysis of samples of 2.2%. The signal of the biosensor was linear up to 1.1 mM for D-sorbitol with sensitivity of (72 +/- 2) nA mM(-1), while a dynamic range was much wider up to 18 mM. The sorbitol biosensor gave reliable results even in the presence of a high molar excess of L-sorbose, a product of the biotransformation process, as judged from an excellent agreement with HPLC and GC.

Ultrasound effect on the aromatic nucleophilic substitution reactions on some haloarenes.

The sonochemical nucleophilic aromatic substitutions on haloarenes with different amines have been studied. A beneficial ultrasound effect was observed and high yields of the products were obtained after 15-30 min sonication. The reaction course of the nucleophilic aromatic substitution was found to be strongly dependent on nucleophilicity, bulkiness, and boiling point of amines as well as on the electron-withdrawing property of the substituents on the haloarenes.

Spectroscopic study of 2-[2-(4-cyclaminophenyl)ethen-1-yl] benzothiazoles and their N-allylbenzothiazolium bromides. Solvent and substituent effects on their ultraviolet-visible and fluorescence spectra.

UV-vis and fluorescence spectra of 2-[2-(4-cyclaminophenyl)ethen-1-yl] benzothiazoles 1 and their N-allylbenzothiazolium bromides 2 have been measured and interpreted. The substitution and solvent effects on electronic structure and spectra have been investigated. The benzothiazolium salts substituted with saturated cyclamines show strong push-pull character and can be used as potential NLO materials. Formation of aggregated structures was observed at higher concentrations of the benzothiazolium bromides.