Down-regulation of CatSper 1 and CatSper 2 genes by lead and mercury.

In the study of the expression of CatSper genes, consideration of the effects of environmental metal toxicity is very important. Therefore, in this study, the effects of lead acetate and mercury chloride exposure on expression of CatSper genes, sperm parameters, histology of testis and prooxidant antioxidant balance (PAB) values of serum were investigated. A total of 28 mice was divided into four groups. The control group did not receive injections. The sham group received normal saline intraperitoneally. Lead and mercury groups were injected 60 and 1.25 mg/kg/daily lead acetate and mercury chloride respectively intraperitoneally for 2 weeks. After 35 days, the sperm analysis and histology of left testis were performed. In addition, serum was obtained to measure the PAB values. The right testis was used for molecular analysis of real-time PCR. Administration with either lead acetate or mercury caused significant damage to the seminiferous tubules as well as a reduction in sperm parameters compared to the control group. The relative expression of CatSper 1 and CatSper 2 in the lead group was lower than that of the control group (-0.01 ±â€¯0.24, -0.007 ±â€¯0.52 vs. 1 ±â€¯0.50, P = 0.34). The relative expression of CatSper 1 and CatSper 2 was significantly lower in the mercury group compared to the control ones (-0.24 ±â€¯2.28, -4.49 ±â€¯4.86 vs. 1 ±â€¯0.50, P = 0.21). PAB values significantly increased in lead or mercury exposed- mice compared to the control ones (0.93 ±â€¯0.17, 1.54 ±â€¯0.17 vs. 0.51 ±â€¯0.11; P ≤ 0.000). The results of this study showed that administration with either lead acetate or mercury chloride caused degenerative damage in seminiferous tubules and reduction in sperm quality and expression of CatSper 1, 2 genes in mice. Therefore, it is possible in infertile men who have had exposure to lead acetate or mercury chloride. Owing to structural similarities, these metals are substitutes for calcium ions and have effects on calcium channels. These cause immobility in sperm by blocking CatSper-specific calcium channels. However, more studies are required to elucidate the mechanism underlying the impact of different doses of heavy metals on CatSper genes expression.

Static mechanical strain induces capillary endothelial cell cycle re-entry and sprouting.

Vascular endothelial cells are known to respond to a range of biochemical and time-varying mechanical cues that can promote blood vessel sprouting termed angiogenesis. It is less understood how these cells respond to sustained (i.e., static) mechanical cues such as the deformation generated by other contractile vascular cells, cues which can change with age and disease state. Here we demonstrate that static tensile strain of 10%, consistent with that exerted by contractile microvascular pericytes, can directly and rapidly induce cell cycle re-entry in growth-arrested microvascular endothelial cell monolayers. S-phase entry in response to this strain correlates with absence of nuclear p27, a cyclin-dependent kinase inhibitor. Furthermore, this modest strain promotes sprouting of endothelial cells, suggesting a novel mechanical 'angiogenic switch'. These findings suggest that static tensile strain can directly stimulate pathological angiogenesis, implying that pericyte absence or death is not necessarily required of endothelial cell re-activation.

Surface characterization and corrosion behavior of calcium phosphate-base composite layer on titanium and its alloys via plasma electrolytic oxidation: A review paper.

In recent years, calcium phosphate-base composites, such as hydroxyapatite (HA) and carbonate apatite (CA) have been considered desirable and biocompatible coating layers in clinical and biomedical applications such as implants because of the high resistance of the composites. This review focuses on the effects of voltage, time and electrolytes on a calcium phosphate-base composite layer in case of pure titanium and other biomedical grade titanium alloys via the plasma electrolytic oxidation (PEO) method. Remarkably, these parameters changed the structure, morphology, pH, thickness and crystallinity of the obtained coating for various engineering and biomedical applications. Hence, the structured layer caused improvement of the biocompatibility, corrosion resistance and assignment of extra benefits for Osseo integration. The fabricated layer with a thickness range of 10 to 20 µm was evaluated for physical, chemical, mechanical and tribological characteristics via XRD, FESEM, EDS, EIS and corrosion analysis respectively, to determine the effects of the applied parameters and various electrolytes on morphology and phase transition. Moreover, it was observed that during PEO, the concentration of calcium, phosphor and titanium shifts upward, which leads to an enhanced bioactivity by altering the thickness. The results confirm that the crystallinity, thickness and contents of composite layer can be changed by applying thermal treatments. The corrosion behavior was investigated via the potentiodynamic polarization test in a body-simulated environment. Here, the optimum corrosion resistance was obtained for the coating process condition at 500 V for 15 min in Ringer solution. This review has been summarized, aiming at the further development of PEO by producing more adequate titanium-base implants along with desired mechanical and biomedical features.

Changes in mechanics and composition of human talar cartilage anlagen during fetal development.

OBJECTIVE: Fetal cartilage anlage provides a framework for endochondral ossification and organization into articular cartilage. We previously reported differences between mechanical properties of talar cartilage anlagen and adult articular cartilage. However, the underlying development-associated changes remain to be established. Delineation of the normal evolvement of mechanical properties and its associated compositional basis provides insight into the natural mechanisms of cartilage maturation. Our goal was to address this issue. MATERIALS AND METHODS: Human fetal cartilage anlagen were harvested from the tali of normal stillborn fetuses from 20 to 36 weeks of gestational age. Data obtained from stress relaxation experiments conducted under confined and unconfined compression configurations were processed to derive the compressive mechanical properties. The compressive mechanical properties were extracted from a linear fit to the equilibrium response in unconfined compression, and by using the nonlinear biphasic theory to fit to the experimental data from the confined compression experiment, both in stress-relaxation. The molecular composition was obtained using Fourier transform infrared (FTIR), and spatial maps of tissue contents per dry weight were created using FTIR imaging. Correlative and regression analyses were performed to identify relationships between the mechanical properties and age, compositional properties and age, and mechanical vs compositional parameters. RESULTS: All of the compositional quantities and the mechanical properties excluding the Poisson's ratio changed with maturation. Stiffness increased by a factor of ∼2.5 and permeability decreased by 20% over the period studied. Collagen content and degree of collagen integrity increased with age by ∼3-fold, while the proteoglycan content decreased by 18%. Significant relations were found between the mechanical and compositional properties. CONCLUSION: The mechanics of fetal talar cartilage is related to its composition, where the collagen and proteoglycan network play a prominent role. An understanding of the mechanisms of early cartilage maturation could provide a framework to guide tissue-engineering strategies.