Silver-Sulfamethazine-Conjugated ß-Cyclodextrin/Dextran-Coated Magnetic Nanoparticles for Pathogen Inhibition.

In the fight against antibiotic resistance, which is rising to dangerously high levels worldwide, new strategies based on antibiotic-conjugated biocompatible polymers bound to magnetic nanoparticles that allow the drug to be manipulated and delivered to a specific target are being proposed. Here, we report the direct surface engineering of nontoxic iron oxide nanoparticles (IONs) using biocompatible dextran (Dex) covalently linked to ß-cyclodextrin (ß-CD) with the ability to form non-covalent complexes with silver-sulfamethazine (SMT-Ag). To achieve a good interaction of ß-CD-modified dextran with the surface of the nanoparticles, it was functionalized with diphosphonic acid (DPA) that provides strong binding to Fe atoms. The synthesized polymers and nanoparticles were characterized by various methods, such as nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) and ultraviolet-visible (UV-Vis) spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), atomic absorption spectroscopy (AAS), dynamic light scattering (DLS), etc. The resulting magnetic ION@DPA-Dex-ß-CD-SMT-Ag nanoparticles were colloidally stable in water and contained 24 µg of antibiotic per mg of the particles. When tested for in vitro antimicrobial activity on Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria and fungi (yeast Candida albicans and mold Aspergillus niger), the particles showed promising potential.

"Activated Borane": A Porous Borane Cluster Polymer as an Efficient Lewis Acid-Based Catalyst.

Borane cluster-based porous covalent networks, named activated borane (ActB), were prepared by cothermolysis of decaborane(14) (nido-B10H14) and selected hydrocarbons (toluene, ActB-Tol; cyclohexane, ActB-cyHx; and n-hexane, ActB-nHx) under anaerobic conditions. These amorphous solid powders exhibit different textural and Lewis acid (LA) properties that vary depending on the nature of the constituent organic linker. For ActB-Tol, its LA strength even approaches that of the commonly used molecular LA, B(C6F5)3. Most notably, ActBs can act as heterogeneous LA catalysts in hydrosilylation/deoxygenation reactions with various carbonyl substrates as well as in the gas-phase dehydration of ethanol. These studies reveal the potential of ActBs in catalytic applications, showing (a) the possibility for tuning catalytic reaction outcomes (selectivity) in hydrosilylation/deoxygenation reactions by changing the material's composition and (b) the very high activity toward ethanol dehydration that exceeds the commonly used γ-Al2O3 by achieving a stable conversion of ∼93% with a selectivity for ethylene production of ∼78% during a 17 h continuous period on stream at 240 °C.

Effect of a Zr-Based Metal-Organic Framework Structure on the Properties of Its Composite with Polyaniline.

Composites of polyaniline (PANI) and Zr-based metal-organic frameworks (MOFs), UiO-66 and UiO-66-NH2, were synthesized by the oxidative polymerization of aniline in the presence of MOF templates with the MOF content in the resulting materials (78.2 and 86.7 wt %, respectively) close to the theoretical value (91.5 wt %). Scanning electron microscopy and transmission electron microscopy showed that the morphology of the composites was set by the morphology of the MOFs, whose structure was mostly preserved after the synthesis, based on the X-ray diffraction data. Vibrational and NMR spectroscopies pointed out that MOFs participate in the protonation of PANI and conducting polymer chains were grafted to amino groups of UiO-66-NH2. Unlike PANI-UiO-66, cyclic voltammograms of PANI-UiO-66-NH2 showed a well-resolved redox peak at around ≈0 V, pointing at the pseudocapacitive behavior. The gravimetric capacitance of PANI-UiO-66-NH2, normalized per mass of the active material, was also found to be higher compared to that of pristine PANI (79.8 and 50.5 F g-1, respectively, at 5 mV s-1). The introduction of MOFs into the composites with PANI significantly improved the cycling stability of the materials over 1000 cycles compared to the pristine conducting polymer, with the residual gravimetric capacitance being ≥100 and 77%, respectively. Thus, the electrochemical performance of the prepared PANI-MOF composites makes them attractive materials for application in energy storage.

"Activated Borane" - A Porous Borane Cluster Network as an Effective Adsorbent for Removing Organic Pollutants.

The unprecedented co-thermolysis of decaborane(14) (nido-B10 H14 ) and toluene results in a novel porous material (that we have named "activated borane") containing micropores between 1.0 and 1.5 nm in diameter and a specific surface area of 774 m2 g-1 (Ar, 87 K) that is thermally stable up to 1000 °C. Solid state 1 H, 11 B and 13 C MAS NMR, UV-vis and IR spectroscopies suggest an amorphous structure of borane clusters interconnected by toluene moieties in a ratio of about three toluene molecules for every borane cluster. In addition, the structure contains Lewis-acidic tri-coordinated boron sites giving it some unique properties. Activated borane displays high sorption capacity for pollutants such as sulfamethoxazole, tramadol, diclofenac and bisphenol A that exceed the capacity of commercially-available activated carbon. The consistency in properties for each batch made, and the ease of its synthesis, make activated borane a promising porous material worthy of broad attention.

Long-chain mercury carboxylates relevant to saponification in oil and tempera paintings: XRPD and ssNMR complementary study of their crystal structures.

Saponification, resulting from pigment-binder interactions, is one of the most endangering phenomena affecting the appearance and stability of painted works of art. The crystallization of metal carboxylates (soaps) in paint layers is recently assumed as the most critical point for the development of undesirable changes induced by saponification, however, the factors triggering it are not fully understood. The red pigment cinnabar (HgS) has been suspected of contributing to saponification, however, the paucity of reliable reference structural data limited the experimental research of its effect at the molecular level. Within this study we synthesized mercury(II) carboxylates of the formula Hg(C16)x(C18)2-x (x = 0.0; 0.2; 0.5; 0.8; 1.0; 1.2; 1.5; 1.8; 2.0) where C16 and C18 are hexadecanoate (palmitate) and octadecanoate (stearate), respectively, and characterize them by combination of X-ray powder diffraction (XRPD) and 13C and 199Hg solid state NMR (ssNMR). For a more detailed interpretation of their structural and thermal behavior, Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) were used. The crystal structure of the studied mercury carboxylates was described on the basis of complementary ssNMR and XRPD measurements, Rietveld refinement and DFT calculations. All the subjected compounds crystallize in a monoclinic lattice of the C2/c symmetry. Mercury atoms are arranged in a slightly distorted square antiprismatic geometry and are monodentatically bonded to carboxylate anions. The structural disorder at the aliphatic end of the stearic acid chains was detected in the mixed carboxylates. Within the paper, the structural (dis)similarity with the corresponding lead carboxylates is discussed. The synthesized and characterized mercury carboxylates were applied to describe neo-formed mercury soaps in a model experiment simulating an egg-based paint system.

Reconstructing Reliable Powder Patterns from Spikelets (Q)CPMG NMR Spectra: Simplification of UWNMR Crystallography Analysis.

Spikelets NMR spectra are very popular as they enable the shortening of experimental time and give the possibility to obtain required NMR parameters for nuclei with ultrawide NMR patterns. Unfortunately, these resulted ssNMR spectra cannot be fitted directly in common software. For this reason, we developed UWNMRSpectralShape (USS) software which transforms spikelets NMR patterns into single continuous lines. Subsequently, these reconstructed spectral envelopes of the (Q)CPMG spikelets patterns can be loaded into common NMR software and automatically fitted, independently of experimental settings. This allows the quadrupole and chemical shift parameters to be accurately determined. Moreover, it makes fitting of spikelets NMR spectra exact, fast and straightforward.

Poly[2-(dimethylamino)ethyl methacrylate-co-ethylene dimethacrylate]nanogel by dispersion polymerization for inhibition of pathogenic bacteria.

Bacterial infections and antimicrobial resistance are one of the major public health problems and various strategies to prevent potential threats have been developed. Protonated polymers were proven as efficient agents against several microbial pathogens. Poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) linear polymer and its copolymers represent one example of functional materials which inhibit the growth of both harmful Gram-negative and Gram-positive bacteria. However, the antimicrobial effect of positively charged PDMAEMA particles has been never tested. In this report, we deeply studied several parameters of free-radical polymerization, including the effect of crosslinking monomer, medium composition, solvency and polarity, and type and concentration of initiator and stabilizer, to fabricate high-quality poly[2-(dimethylamino)ethyl methacrylate-co-ethylene dimethacrylate] (PDMAEMA-EDMA) nanogel. We successfully found that dispersion polymerization in water/2-methoxyethanol medium (80/20 w/w), initiated with 0.2 wt% potassium persulfate (KPS) and stabilized with 0.5 wt% poly(vinyl alcohol) (PVA), produced a well-defined and sub-micron 167 nm PDMAEMA-EDMA nanogel. Bactericidal activity of the quaternized PDMAEMA-EDMA nanogel was assessed via time-kill curve assay against two Gram-positive and Gram-negative pathogenic bacteria, namely Staphylococcus aureus (S. aureus) and Acinetobacter baumannii (A. baumannii). The results illustrated that the quaternized PDMAEMA-EDMA nanogel acted as an effective bactericidal agent against both tested bacteria.

Copolymer chain formation of 2-oxazolines by in situ 1H-NMR spectroscopy: dependence of sequential composition on substituent structure and monomer ratios.

In situ 1H NMR characterization of copolymerization reactions of various 2-oxazoline monomers at different molar ratios offers detailed insight into the build-up and composition of the polymer chains. Various 2-oxazolines were copolymerized in one single solvent, butyronitrile, with 2-dec-9'-enyl-2-oxazoline, where the double bond allows for post-polymerization modification and can function as a crosslinking unit to form polymer networks. The types of the monomers and their molar ratios in the feed have a strong effect on the microstructure of the forming copolymer chains. Copolymers comprising 2-dec-9'-enyl-2-oxazoline and either 2-ethyl-, 2-isopropyl-, 2-butyl-, 2-heptyl, 2-nonyl- or 2-phenyl-2-oxazoline, show significant differences in sequential structure of copolymers ranging from block to gradient and random ordering of the monomer units. 1H NMR was found to be a powerful tool to uncover detailed oxazoline copolymerization kinetics and evolution of chain composition.