Laypersons' Esthetic Perception of Different Dentogingival Characteristics Based on Smile Dynamics: Cross-Sectional Study.

This study aimed to evaluate laypersons' esthetic perception of different dentogingival characteristics based on smile dynamics. Six voluntary models were selected, with only one presenting dentogingival characteristics within esthetic standards: white teeth, good alignment, and adequate gingival contour. Two videos were then produced. One video focused on the mouth, whereas the other focused on the entire face of the model, to ensure that the dynamics of the smile could be evaluated. For the evaluation, 200 laypeople were asked to rank the models from first to sixth place in their order of preference. Laypeople were required to justify their reasons for choosing the first and last places. The obtained data were subjected to descriptive and inferential statistical analyses. The results showed that smile and face dynamics influenced the perception of dentogingival characteristics and facial esthetics. No significant changes were observed. However, a gummy smile accompanied by dental alterations was observed in the video of the mouth and was masked by the facial set exposed in the video of the face. A diastema between the central incisors was decisive for negative evaluation of both the mouth and face. The standard model was rated as the most pleasing. Smiles and facial dynamics influence the perception of dentogingival characteristics. Smile and facial dynamics influence the perception of dentogingival alterations among Brazilian laypeople. Diastema is an alteration that interferes with the isolated evaluation of the lower third of the face and the facial set.

Assessment of permeability of eroded dentin after the use of universal, self-etch, and conventional systems.

Dentin hypersensitivity is caused by increased dentinal permeability due to total or partial exposure of dentinal tubules, which in turn can be produced by alterations of dental structures or failure of restorative procedures. The purpose of this in vitro study was to evaluate the efficacy of the application of different kinds of adhesive systems to prevent dentin permeability before and after an erosive challenge. Fifty bovine dentin discs (6x1 mm) were prepared and the specimens were divided into 5 groups (n=10): (SB2) Single Bond 2, (SBU) Universal Single Bond, (CSB) Clearfil SE Bond, (SM) Scotchbond Multipurpose and (C) Control. Hydraulic conductance of dentin was recorded after adhesive application (HC-1) and after erosive challenge (HC-2). Dentin surface images of post-treatment and post-erosive challenge were obtained by scanning electron microscopy (SEM). Data were analyzed using Kruskal Wallis, Mann-Whitney with Bonferroni correction and Wilcoxon tests (p<0.05). Reduction in dentin permeability was observed with the application of adhesive systems (p<0.05). After the erosive challenge, dentin permeability increased for SBU and CSB (p<0.05), while SB2 and SM did not differ in HC-1 or HC-2 (p>0.05). The conventional, self-etching and universal adhesive systems reduce dentinal permeability by more than 80%, and dentin demineralization may contribute to the increased permeability of universal and self-etching systems.

Diversos pacientes apresentam hipersensibilidade dentária ou falha nos procedimentos restauradores, devido à exposição total ou parcial de túbulos dentinários. O objetivo deste estudo in vitro foi o de avaliar a influência da aplicação de diferentes tipos de sistemas adesivos na permeabilidade da dentina e após o desafio erosivo. Cinquenta discos de dentina bovina (6x1 mm) foram confeccionados e os espécimes foram divididos em 5 grupos (n = 10): (SB2) Single Bond 2, (SBU) Universal Single Bond, (CSB) Clearfil SE Bond, (SM) Scotchbond Multiuso e (C) Controle. A condutância hidráulica da dentina foi registrada após a aplicação do adesivo (HC-1) e após o desafio erosivo (HC-2). Imagens da superfície da dentina de pós-tratamento e pós-desafio erosivo foram obtidas por microscopia eletrônica de varredura (MEV). Os dados foram analisados pelos testes de Kruskal Wallis, Mann-Whitney com correção de Bonferroni e Wilcoxon (p <0,05). Redução da permeabilidade dentinária foi observada com a aplicação dos sistemas adesivos (p <0,05). Após o desafio erosivo, a permeabilidade dentinária aumentou para SBU e CSB (p <0,05), enquanto SB2 e SM não diferiram em HC-1 e HC-2 (p> 0,05). Os sistemas adesivos convencionais, autocondicionantes e universais reduzem a permeabilidade dentinária em mais de 80%, e a dentina desmineralizada pode gerar um aumento da permeabilidade dos sistemas adesivos universais e autocondicionantes.

Assessment of permeability of eroded dentin after the use of universal, self-etch, and conventional systems / Avaliaçao da permeabilidade da dentina com erosao, após o uso de sistemas universais, autocondicionantes e convencionais

ABSTRACT Dentin hypersensitivity is caused by increased dentinal permeability due to total or partial exposure of dentinal tubules, which in turn can be produced by alterations of dental structures or failure of restorative procedures. The purpose of this in vitro study was to evaluate the efficacy of the application of different kinds of adhesive systems to prevent dentin permeability before and after an erosive challenge. Fifty bovine dentin discs (6x1 mm) were prepared and the specimens were divided into 5 groups (n=10): (SB2) Single Bond 2, (SBU) Universal Single Bond, (CSB) Clearfil SE Bond, (SM) Scotchbond Multipurpose and (C) Control. Hydraulic conductance of dentin was recorded after adhesive application (HC-1) and after erosive challenge (HC-2). Dentin surface images of post-treatment and post-erosive challenge were obtained by scanning electron microscopy (SEM). Data were analyzed using Kruskal Wallis, Mann-Whitney with Bonferroni correction and Wilcoxon tests (p<0.05). Reduction in dentin permeability was observed with the application of adhesive systems (p<0.05). After the erosive challenge, dentin permeability increased for SBU and CSB (p<0.05), while SB2 and SM did not differ in HC-1 or HC-2 (p>0.05). The conventional, self-etching and universal adhesive systems reduce dentinal permeability by more than 80%, and dentin demineralization may contribute to the increased permeability of universal and self-etching systems.

RESUMO Diversos pacientes apresentam hipersensibilidade dentaria ou falha nos procedimentos restauradores, devido á exposigao total ou parcial de túbulos dentinários. O objetivo deste estudo in vitro foi o de avaliar a influencia da aplicagao de diferentes tipos de sistemas adesivos na permeabilidade da dentina e após o desafio erosivo. Cinquenta discos de dentina bovina (6x1 mm) foram confeccionados e os espécimes foram divididos em 5 grupos (n = 10): (SB2) Single Bond 2, (SBU) Universal Single Bond, (CSB) Clearfil SE Bond, (SM) ScotchbondMultiuso e (C) Controle. A condutáncia hidráulica da dentina foi registrada após a aplicagao do adesivo (HC-1) e após o desafio erosivo (HC-2). Imagens da superficie da dentina de pós-tratamento e pós-desafio erosivo foram obtidas por microscopia eletronica de varredura (MEV). Os dados foram analisados pelos testes de Kruskal Wallis, Mann-Whitney com correçâo de Bonferroni e Wilcoxon (p <0,05). Reduçâo da permeabilidade dentinária foi observada com a aplicaçâo dos sistemas adesivos (p <0,05). Após o desafio erosivo, a permeabilidade dentinária aumentou para SBU e CSB (p <0,05), enquanto SB2 e SM nao diferiram em HC-1 e HC-2 (p> 0,05). Os sistemas adesivos convencionais, autocondicionantes e universais reduzem a permeabilidade dentinária em mais de 80%, e a dentina desmineralizada pode gerar um aumento da permeabilidade dos sistemas adesivos universais e autocondicionantes.

Retention of cemented zirconia copings on TiBase abutments.

This study evaluated the influence of resin cements and glass ionomers on tensile strength and types of failure of zirconia copings cemented on titanium base abutments. Forty-two samples were prepared, which were formed by a Cone Morse implant, a titanium abutment with the fixing screw, and a zirconia structure made using a CAD/CAM system. The samples (n = 42) were randomly distributed according to the cementing agent: resin-modified glass ionomer cement (RelyX Luting 2), self-adhesive resin cement (RelyX U200), and self-curing resin cement (Multilink N). After cementation of the copings, half of the samples from each group (n = 7) were randomly selected and subjected to thermocycling (5000 cycles). A tensile load test was performed on a universal testing machine until failure occurred (1 mm). In addition, the type of failure was analyzed using the two-way analysis of variance test and Tukey's post-hoc test (α = 0.05). Lower tensile load was observed for the glass ionomer cement (p < 0.001) regardless of the evaluation period. After thermocycling, a significant reduction in tensile load values was verified for both evaluated cements (p = 0.047). For the resin cements, failures were predominantly of the screw fracture type (82.1%) already with the use of glass ionomer cement, and 28.5% of the failures were of an adhesive type between the zirconia coping and the cement. Resin cements have better stability under tensile load compared to resin glass ionomers when cementing zirconia copings on titanium base abutments.

Este estudo avaliou influência dos cimentos resinosos e a base de ionômero de vidro na resistência à tração e os tipos de falhas de copings de zircônia cimentados sobre pilares TiBase. Foram confeccionadas 42 amostras, sendo estas formadas por implante cone morse, pilar de titânio (TiBase) com o parafuso de fixação e uma estrutura de zircônia (coping de Zr) confeccionado através do sistema CAD/CAM. As amostras (n =42) foram aleatoriamente distribuídas de acordo com o agente de cimentação: (cimento de ionômero de vidro modificado por resina [RelyXTMLuting2]; cimento resinoso autoadesivo [RelyXTM U200] e cimento resinoso autopolimerizavel (Multilink® N). Após cimentação dos copings, metade das amostras de cada grupo (n = 7) foram aleatoriamente selecionadas e submetidas a termociclagem (5000 ciclos). O Teste de resistência a tração foi realizado em uma máquina de ensaio universal, até que ocorresse a falha (1 mm/min). Adicionalmente, o tipo de falha foi analizado. Os dados foram analisados pelo teste ANOVA two-way e post teste de Tukey's (α = 0.05). Menor média de resistência a tração foi observada para o cimento de ionômero de vidro (p < 0,001) independente do período de avaliação. Após a termociclagem, foi verificada uma redução significativa nos valores de resistênca a tração, para os cimentos avaliados (p=0,047). Para os cimentos resinosos, as falhas foram predominantemente do tipo fratura do parafuso (82,1%) já com o uso do cimento de ionômero de vidro, 28,5% das falhas foram de tipo adesiva entre o coping de Zr e o cimento. Cimentos resinosos apresentam melhor estabilidade na resistência a tração em comparação a ionmeros de vidro resinosos na cimentação de copings de zircônia sobre pilares TiBase.

Retention of cemented zirconia copings on TiBase abutments / Retenção de copings de zirconia cimentados sobre pilares tibase

ABSTRACT This study evaluated the influence of resin cements and glass ionomers on tensile strength and types of failure of zirconia copings cemented on titanium base abutments. Forty-two samples were prepared, which were formed by a Cone Morse implant, a titanium abutment with the fixing screw, and a zirconia structure made using a CAD/CAM system. The samples (n = 42) were randomly distributed according to the cementing agent: resin-modified glass ionomer cement (RelyX Luting 2), self-adhesive resin cement (RelyX U200), and self-curing resin cement (Multilink N). After cementation of the copings, half of the samples from each group (n = 7) were randomly selected and subjected to thermocycling (5000 cycles). A tensile load test was performed on a universal testing machine until failure occurred (1 mm). In addition, the type of failure was analyzed using the two-way analysis of variance test and Tukey's post-hoc test (α = 0.05). Lower tensile load was observed for the glass ionomer cement (p < 0.001) regardless of the evaluation period. After thermocycling, a significant reduction in tensile load values was verified for both evaluated cements (p = 0.047). For the resin cements, failures were predominantly of the screw fracture type (82.1%) already with the use of glass ionomer cement, and 28.5% of the failures were of an adhesive type between the zirconia coping and the cement. Resin cements have better stability under tensile load compared to resin glass ionomers when cementing zirconia copings on titanium base abutments.

RESUMO Este estudo avaliou influência dos cimentos resinosos e a base de ionômero de vidro na resistência à tração e os tipos de falhas de copings de zircônia cimentados sobre pilares TiBase. Foram confeccionadas 42 amostras, sendo estas formadas por implante cone morse, pilar de titânio (TiBase) com o parafuso de fixação e uma estrutura de zircônia (coping de Zr) confeccionado através do sistema CAD/CAM. As amostras (n =42) foram aleatoriamente distribuídas de acordo com o agente de cimentação: (cimento de ionômero de vidro modificado por resina [RelyXTMLuting2]; cimento resinoso autoadesivo [RelyXTM U200] e cimento resinoso autopolimerizavel (Multilink® N). Após cimentação dos copings, metade das amostras de cada grupo (n = 7) foram aleatoriamente selecionadas e submetidas a termociclagem (5000 ciclos). O Teste de resistência a tração foi realizado em uma máquina de ensaio universal, até que ocorresse a falha (1 mm/min). Adicionalmente, o tipo de falha foi analizado. Os dados foram analisados pelo teste ANOVA two-way e post teste de Tukey's (α = 0.05). Menor média de resistência a tração foi observada para o cimento de ionômero de vidro (p < 0,001) independente do período de avaliação. Após a termociclagem, foi verificada uma redução significativa nos valores de resistênca a tração, para os cimentos avaliados (p=0,047). Para os cimentos resinosos, as falhas foram predominantemente do tipo fratura do parafuso (82,1%) já com o uso do cimento de ionômero de vidro, 28,5% das falhas foram de tipo adesiva entre o coping de Zr e o cimento. Cimentos resinosos apresentam melhor estabilidade na resistência a tração em comparação a ionmeros de vidro resinosos na cimentação de copings de zircônia sobre pilares TiBase.

Volume and/or Time of NaOCl Influences the Fracture Strength of Endodontically Treated Bovine Teeth.

The aim of this study was to evaluate whether amplifying the volume and/or time of contact of NaOCl affects the fracture strength of endodontically treated bovine teeth. Four bovine incisors from 10 animals were allocated into 4 groups using a split-mouth design. Root canals were instrumented using a sequence of 4 manual stainless steel files and irrigated with a 5.25% alkalized NaOCl solution. The total volume and time of irrigation, per sample, varied among the groups as following: standard volume and time of contact - 15 mL/11.5 min; volume raise - 30 mL/11.5 min; time of contact raise - 15 mL/19 min; and volume and time of contact raise - 30 mL/19 min. Samples were subjected to a fracture resistance assay. At p=0.05, two-way ANOVA statistically scrutinized the results. Effect size of NaOCl time of contact and volume were also calculated (η2). The variation in time (p=0.000), volume of irrigation (p=0.000) and the combination of both (p=0.038) negatively influenced the fracture resistance. Standard volume and time of irrigation showed the highest fracture strength while isolated increase in volume or time reduced in 25% and 37%, respectively, the fracture resistance; the simultaneous increase in volume and time of irrigation promoted a reduction of 47%. Effect size of NaOCl time of contact was superior (0.746) than the volume (0.564). Raising the volume and/or time of a 5.25% alkalized NaOCl solution reduces the fracture resistance of endodontically treated bovine teeth.

Volume and/or time of naocl influences the fracture strength of endodontically treated bovine teeth

Abstract The aim of this study was to evaluate whether amplifying the volume and/or time of contact of NaOCl affects the fracture strength of endodontically treated bovine teeth. Four bovine incisors from 10 animals were allocated into 4 groups using a split-mouth design. Root canals were instrumented using a sequence of 4 manual stainless steel files and irrigated with a 5.25% alkalized NaOCl solution. The total volume and time of irrigation, per sample, varied among the groups as following: standard volume and time of contact - 15 mL/11.5 min; volume raise - 30 mL/11.5 min; time of contact raise - 15 mL/19 min; and volume and time of contact raise - 30 mL/19 min. Samples were subjected to a fracture resistance assay. At p=0.05, two-way ANOVA statistically scrutinized the results. Effect size of NaOCl time of contact and volume were also calculated (η2). The variation in time (p=0.000), volume of irrigation (p=0.000) and the combination of both (p=0.038) negatively influenced the fracture resistance. Standard volume and time of irrigation showed the highest fracture strength while isolated increase in volume or time reduced in 25% and 37%, respectively, the fracture resistance; the simultaneous increase in volume and time of irrigation promoted a reduction of 47%. Effect size of NaOCl time of contact was superior (0.746) than the volume (0.564). Raising the volume and/or time of a 5.25% alkalized NaOCl solution reduces the fracture resistance of endodontically treated bovine teeth.

Resumo O objetivo desse estudo foi o de avaliar se o aumento de volume e/ou tempo de contato do NaOCl afeta a resistência à fratura de dentes bovinos tratados endodonticamente. Quatro incisivos bovinos de 10 animais foram alocados em 4 grupos usando um desenho experimental de boca dividida. Os canais radiculares foram instrumentados usando uma sequência de 4 limas manuais de aço inoxidável e irrigados com uma solução de NaOCl alcalinizada a 5,25%. O volume total e o tempo de irrigação, por amostra, variaram entre os grupos da seguinte forma: volume e tempo de contato padrão (grupo controle) - 15 mL/11,5 min; aumento de volume - 30 mL/11,5 min; aumento no tempo de contato - 15 mL/19 min; e aumento no volume e no tempo de contato - 30 mL/19 min. As amostras foram submetidas a um ensaio de resistência à fratura. Com p=0.05, o teste two-way ANOVA analisou estatisticamente os resultados. O tamanho do efeito do tempo de contato e volume de NaOCl também foi calculado (h2). A variação no tempo (p=0,000), no volume de irrigação (p=0,000) e a interação entre ambos (p=0.038) influenciaram negativamente a resistência à fratura. O volume e o tempo padrão de irrigação apresentaram a maior resistência à fratura, enquanto o aumento isolado no volume ou no tempo de contato reduziram 25% e 37%, respectivamente, a resistência à fratura; o aumento simultâneo do volume e tempo de irrigação promoveu uma redução de 47%. O tamanho do efeito do tempo de contato com o NaOCl foi superior (0,746) ao volume (0,564). Aumentando o volume e/ou o tempo de uma solução de NaOCl alcalinizada a 5,25% reduz a resistência à fratura de dentes bovinos tratados endodonticamente.

Single vs Two-session Root Canal Treatment: A Preliminary Randomized Clinical Study using Cone Beam Computed Tomography.

AIMS: To compare root canal treatment of teeth with apical periodontitis (AP) in a single or two visits, using cone beam computed tomography (CBCT). MATERIALS AND METHODS: Twenty-six pairs of teeth (13 patients) were assigned to two groups: Group single-session (GSS): Instrumentation and root canal filling in the same session; and group two-session (GTS): A calcium hydroxide intracanal medication (Calen(®) paste) was used for 14 days between two sessions. Cone beam computed tomography scans were obtained before and 12 months after treatment. The pre- and postoperative volume of the AP lesions was measured in mm(3). The percentages of volume reduction was compared using Student's t-test and the existence of significant difference between the groups for cases with ≤ 50% or > 50% lesion volume reduction was assessed by chi-squared test ratio likelihood test (α = 5%). RESULTS: The volume reduction was greater in GTS (79.25%) than GSS (68.35%), though without significant difference (p > 0.05). After 12 months, complete repair was not observed in any specimen. Lesion volume reduction > 50% was significantly greater with the use of an intracanal medication (p < 0.05). CONCLUSION: Twelve months posttreatment, CBCT did not show complete repair in any of the teeth, suggesting that this follow-up period is not sufficient for complete lesion regression. In both groups, similar AP lesion volume reduction was observed after 12 months, with a more advanced repair (> 50% volume reduction) in the teeth medicated with calcium hydroxide intracanal dressing. CLINICAL SIGNIFICANCE: Calcium hydroxide intracanal dressing provided clinical evidence to indicate its use in teeth with apical periodontitis prior to definitive root canal filling.