Quantitative description of the phase-separation behavior of the multivalent SLP65-CIN85 complex.

Biomolecular condensates play a major role in cell compartmentalization, besides membrane-enclosed organelles. The multivalent SLP65 and CIN85 proteins are proximal B-cell antigen receptor (BCR) signal effectors and critical for proper immune responses. In association with intracellular vesicles, the two effector proteins form phase separated condensates prior to antigen stimulation, thereby preparing B lymphocytes for rapid and effective activation upon BCR ligation. Within this tripartite system, 6 proline-rich motifs (PRMs) of SLP65 interact promiscuously with 3 SH3 domains of the CIN85 monomer, establishing 18 individual SH3-PRM interactions whose individual dissociation constants we determined. Based on these 18 dissociation constants, we measured the phase-separation properties of the natural SLP65/CIN85 system as well as designer constructs that emphasize the strongest SH3/PRM interactions. By modeling these various SLP65/CIN85 constructs with the program LASSI (LAttice simulation engine for Sticker and Spacer Interactions), we reproduced the observed phase-separation properties. In addition, LASSI revealed a deviation in the experimental measurement, which was independently identified as a previously unknown intramolecular interaction. Thus, thermodynamic properties of the individual PRM/SH3 interactions allow us to model the phase-separation behavior of the SLP65/CIN85 system faithfully.

Real-time tracking of electron transfer at catalytically active interfaces in lithium-ion batteries.

Transition metals and related compounds are known to exhibit high catalytic activities in various electrochemical reactions thanks to their intriguing electronic structures. What is lesser known is their unique role in storing and transferring electrons in battery electrodes which undergo additional solid-state conversion reactions and exhibit substantially large extra capacities. Here, a full dynamic picture depicting the generation and evolution of electrochemical interfaces in the presence of metallic nanoparticles is revealed in a model CoCO3/Li battery via an in situ magnetometry technique. Beyond the conventional reduction to a Li2CO3/Co mixture under battery operation, further decomposition of Li2CO3 is realized by releasing interfacially stored electrons from its adjacent Co nanoparticles, whose subtle variation in the electronic structure during this charge transfer process has been monitored in real time. The findings in this work may not only inspire future development of advanced electrode materials for next-generation energy storage devices but also open up opportunities in achieving in situ monitoring of important electrocatalytic processes in many energy conversion and storage systems.

"Soggy-Sand" Chemistry for High-Voltage Aqueous Zinc-Ion Batteries.

The narrow electrochemical stability window, deleterious side reactions, and zinc dendrites prevent the use of aqueous zinc-ion batteries. Here, aqueous "soggy-sand" electrolytes (synergistic electrolyte-insulator dispersions) are developed for achieving high-voltage Zn-ion batteries. How these electrolytes bring a unique combination of benefits, synergizing the advantages of solid and liquid electrolytes is revealed. The oxide additions adsorb water molecules and trap anions, causing a network of space charge layers with increased Zn2+ transference number and reduced interfacial resistance. They beneficially modify the hydrogen bond network and solvation structures, thereby influencing the mechanical and electrochemical properties, and causing the Mn2+ in the solution to be oxidized. As a result, the best performing Al2 O3 -based "soggy-sand" electrolyte exhibits a long life of 2500 h in Zn||Zn cells. Furthermore, it increases the charging cut-off voltage for Zn/MnO2 cells to 2 V, achieving higher specific capacities. Even with amass loading of 10 mgMnO2 cm-2 , it yields a promising specific capacity of 189 mAh g-1 at 1 A g-1 after 500 cycles. The concept of "soggy-sand" chemistry provides a new approach to design powerful and universal electrolytes for aqueous batteries.

Interface Diffusion and Compatibility of (Ba,La)FeO3-δ Perovskite Electrodes in Contact with Barium Zirconate and Ceria.

Ba1-xLaxFeO3-δ perovskites (BLF) capable of conducting electrons, protons, and oxygen ions are promising oxygen electrodes for efficient solid oxide cells (fuel cells or electrolyzers), an integral part of prospected large-scale power-to-gas energy storage systems. We investigated the compatibility of BLF with lanthanum content between 5 and 50%, in contact with oxide-ion-conducting Ce0.8Gd0.2O2-δ and proton-conducting BaZr0.825Y0.175O3-δ electrolytes, annealing the electrode-electrolyte bilayers at high temperature to simulate thermal stresses of fabrication and prolonged operation. By employing both bulk X-ray diffraction and synchrotron X-ray microspectroscopy, we present a space-resolved picture of the interaction between electrode and electrolyte as what concerns cation interdiffusion, exsolution, and phase stability. We found that the phase stability of BLF in contact with other phases is correlated with the Goldschmidt tolerance factor, in turn determined by the La/Ba ratio, and appropriate doping strategies with oversized cations (Zn2+, Y3+) could improve structural stability. While extensive reactivity and/or interdiffusion was often observed, we put forward that most products of interfacial reactions, including proton-conducting Ba(Ce,Gd)O3-δ and mixed-conducting (Ba,La)(Fe,Zr,Y)O3-δ, may not be very detrimental for practical cell operation.

Electron Ptychographic Phase Imaging of Beam-sensitive All-inorganic Halide Perovskites Using Four-dimensional Scanning Transmission Electron Microscopy.

Halide perovskites (HPs) are promising candidates for optoelectronic devices, such as solar cells or light-emitting diodes. Despite recent progress in performance optimization and low-cost manufacturing, their commercialization remains hindered due to structural instabilities. While essential to the development of the technology, the relation between the microscopic properties of HPs and the relevant degradation mechanisms is still not well understood. The sensitivity of HPs toward electron-beam irradiation poses significant challenges for transmission electron microscopy (TEM) investigations of structure and degradation mechanisms at the atomic scale. However, technological advances and the development of direct electron cameras (DECs) have opened up a completely new field of electron microscopy: four-dimensional scanning TEM (4D-STEM). From a 4D-STEM dataset, it is possible to extract not only the intensity signal for any STEM detector geometry but also the phase information of the specimen. This work aims to show the potential of 4D-STEM, in particular, electron exit-wave phase reconstructions via focused probe ptychography as a low-dose and dose-efficient technique to image the atomic structure of beam-sensitive HPs. The damage mechanism under conventional irradiation is described and atomically resolved almost aberration-free phase images of three all-inorganic HPs, CsPbBr3, CsPbIBr2, and CsPbI3, are presented with a resolution down to the aperture-constrained diffraction limit.

How to Adequately Describe Full Range Intercalation-A Two-Sided Approach.

One of the key challenges in battery research is to quantitatively describe the intercalation storage capacity as a function of the reversible cell voltage. The reason that such endeavors are not yet very successful, lies in the lack of an adequate charge carrier treatment. Using the most challenging example of nanocrystalline lithium iron phosphate, where the full range from FePO4 to LiFePO4 is accessible without miscibility gap, this study shows how a quantitative description of literature results can be achieved even for such a huge window. For this purpose, point-defect thermodynamics is applied and the problem is tackled from the two end-member sides including saturation effects. A first, rather heuristic treatment interpolates in-between using the safe thermodynamic criterion of local phase stability. Already this straightforward approach works very satisfactorily. In order to also gain mechanistic insight, interactions among and between ions and electrons have to be taken account of. This study shows how to implement them into the analysis.

Unraveling the Reaction Mystery of Li and Na with Dry Air.

Li and Na metals with high energy density are promising in application in rechargeable batteries but suffer from degradation in the ambient atmosphere. The phenomenon that in terms of kinetics, Li is stable but Na is unstable in dry air has not been fully understood. Here, we use in situ environmental transmission electron microscopy combined with theoretical simulations and reveal that the different stabilities in dry air for Li and Na are reflected by the formation of compact Li2O layers on Li metal, while porous and rough Na2O/Na2O2 layers on Na metal are a consequence of the different thermodynamic and kinetics in O2. It is shown that a preformed carbonate layer can change the kinetics of Na toward an anticorrosive behavior. Our study provides a deeper understanding of the often-overlooked chemical reactions with environmental gases and enhances the electrochemical performance of Li and Na by controlling interfacial stability.

Ionic and electronic polarization effects in horizontal hybrid perovskite device structures close to equilibrium.

The electrical response of hybrid perovskite devices carries a significant signature from mobile ionic defects, pointing to both opportunities and threats when it comes to functionality, performance and stability of these devices. Despite its importance, the interpretation of polarization effects due to the mixed ionic-electronic conducting nature of these materials and the quantification of their ionic conductivities still poses conceptual and practical challenges, even for the equilibrium situation. In this study, we address these questions and investigate the electrical response of horizontal devices based on methylammonium lead iodide (MAPI) close to equilibrium conditions. We discuss the interpretation of DC polarization and impedance spectroscopy measurements in the dark, based on calculated and fitted impedance spectra obtained using equivalent circuit models that account for the mixed conductivity of the perovskite and for the effect of device geometry. Our results show that, for horizontal structures with a gap width between the metal electrodes in the order of tens of microns, the polarization behavior of MAPI is well described by the charging of the mixed conductor/metal interface, suggesting a Debye length in the perovskite close to 1 nm. We highlight a signature in the impedance response at intermediate frequencies, which we assign to ionic diffusion in the plane parallel to the MAPI/contact interface. By comparing the experimental impedance results with calculated spectra for different circuit models, we discuss the potential role of multiple mobile ionic species and rule out a significant contribution from iodine exchange with the gas phase in the electrical response of MAPI close to equilibrium. This study helps to clarify the measurement and interpretation of mixed conductivity and polarization effects in hybrid perovskites with immediate relevance to the characterization and development of transistors, memristors and solar cells based on this class of materials as well as other mixed conductors.

Ionic and electronic energy diagrams for hybrid perovskite solar cells.

The development of photoelectrochemical devices based on mixed ionic-electronic conductors requires knowledge of transport, generation and reaction of electronic and ionic charge carriers. Thermodynamic representations can significantly help the understanding of these processes. They should be simple and reflect the necessity of dealing with ions and electrons. In this work, we discuss the extension of energy diagrams commonly used to describe electronic properties of semiconductors to the defect chemical treatment of electronic and ionic charge carriers in mixed conducting materials as introduced in the context of nanoionics. We focus on hybrid perovskites in relation to their use as the active layer material of solar cells. Owing to the presence of at least two ion types, a variety of native ionic disorder processes have to be dealt with in addition to the single fundamental electronic disorder process as well as potential frozen-in defects. Various situations are discussed that show how such generalized level diagrams can be usefully applied and appropriately simplified in the determination of the equilibrium behavior of bulk and interfaces in solar cell devices. This approach can serve as a basis for investigating the behavior of perovskite solar cells, but also other mixed-conducting devices operating under bias.

Ion transport mechanism in anhydrous lithium thiocyanate LiSCN part II: frequency dependence and slow jump relaxation.

Specific aspects of the Li+ cation conductivity of anhydrous Li(SCN) are investigated, in particular the high migration enthalpy of lithium vacancies. Close inspection of impedance spectra and conductivity data reveals two bulk relaxation processes, with comparatively fast ion transport at high frequencies and slow ion migration at low frequencies. The impedance results are supported by solid state nuclear magnetic resonance (ssNMR), and pair distribution function (PDF) analysis. This behavior reflects a frequency dependent conductivity, which is related to the extremely slow thiocyanate (SCN)- anion lattice relaxation that occurs when a Li+ cation jumps to the next available site. Two possible migration models are proposed: the first model considers an asymmetric energy landscape for Li+ cation hopping, while the second model is connected to the jump relaxation model and allows for 180° rotational disorder of the (SCN)- anion. A complete kinetic analysis for the hopping of Li+ cations is presented, which reveals new fundamental insights into the ion transport mechanism of materials with complex anions.

Ion transport mechanism in anhydrous lithium thiocyanate LiSCN part III: charge carrier interactions in the premelting regime.

In lithium thiocyanate Li(SCN), the temperature regime below the melting point (274 °C) is characterized by excess conductivities over the usual Arrhenius behavior (premelting regime). Here, the Schottky defect pair concentration is high, and the point defect chemistry can no longer be considered as dilute. Coulomb interactions of Schottky pairs are expected to occur lowering the formation energy of new carriers and hence leading avalanche-like to a transition into a fully defective superionic state. The respective non-linear behavior is investigated using the cube-root law approach characterized by a defect interaction parameter J, which is a measure of the effective defect-lattice energy. In the case of Li(SCN), the rather pronounced volume expansion is to be included in the model. A literature comparison with other materials emphasizes to what degree defect formation as well as defect interactions depend not only on the dominant mobile defect, but also on the respective sublattice. Overall, a quantitative description of the defect chemistry of Li(SCN) in the premelting regime is derived.

Ion transport mechanism in anhydrous lithium thiocyanate LiSCN Part I: ionic conductivity and defect chemistry.

This work reports on the ion transport properties and defect chemistry in anhydrous lithium thiocyanate Li(SCN), which is a pseudo-halide Li+ cation conductor. An extensive doping study was conducted, employing magnesium, zinc and cobalt thiocyanate as donor dopants to systematically vary the conductivity and derive a defect model. The investigations are based on impedance measurements and supported by other analytical techniques such as X-ray powder diffraction (XRPD), infrared (IR) spectroscopy, and density functional theory (DFT) calculations. The material was identified as Schottky disordered with lithium vacancies being the majority mobile charge carriers. In the case of Mg2+ as dopant, defect association with lithium vacancies was observed at low temperatures. Despite a comparably low Schottky defect formation enthalpy of (0.6 ± 0.3) eV, the unexpectedly high lithium vacancy migration enthalpy of (0.89 ± 0.08) eV distinguishes Li(SCN) from the chemically related lithium halides. A detailed defect model of Li(SCN) is presented and respective thermodynamic and kinetic data are given. The thiocyanate anion (SCN)- has a significant impact on ion mobility due to its anisotropic structure and bifunctionality in forming both Li-N and Li-S bonds. More details about the impact on ion dynamics at local and global scale, and on the defect chemical analysis of the premelting regime at high temperatures are given in separate publications (Part II and Part III).

Discrete modeling of ionic space charge zones in solids.

The discrete model of space charge zones in solids reveals and remedies a variety of problems with the classic continuous Gouy-Chapman solution that occur for pronounced space charge potentials. Besides inherent problems of internal consistency, it is essentially the extremely steep profile close to the interface which makes this continuum approach questionable. Not only is quasi-1D discrete modeling a sensible approach for large space charge effects, it can also favorably be combined with the continuum description. A particularly useful application is the explicit implementation of crystallographic details and non-idealities close to the interface. This enables us to consider elastic, structural or saturation effects as well as permittivity variations in a simple but realistic way. We address details of the charge carrier profiles, but also overall properties such as space charge capacitance and space charge resistance. In the latter case the difference in the total charge (at identical concentration) is of importance, in the first case it is the inherent difference in the centroid of charge (at identical total charge) that is remarkable. The model is equally applicable for ionic charge carriers and small polarons.

Influence of Porosity of Sulfide-Based Artificial Solid Electrolyte Interphases on Their Performance with Liquid and Solid Electrolytes in Li and Na Metal Batteries.

Realization of all-solid-state batteries combined with metallic Li/Na is still hindered due to the unstable interface between the alkali metal and solid electrolytes, especially for highly promising thiophosphate materials. Artificial and uniform solid-electrolyte interphases (SEIs), serving as thin ion-conducting films, have been considered as a strategy to overcome the issues of such reactive interfaces. Here, we synthesized sulfide-based artificial SEIs (LixSy and NaxSy) on Li and Na by solid/gas reaction between the alkali metal and S vapor. The synthesized films are carefully characterized with various chemical/electrochemical techniques. We show that these artificial SEIs are not beneficial from an application point of view since they either contribute to additional resistances (Li) or do not prevent reactions at the alkali metal/electrolyte interface (Na). We show that NaxSy is more porous than LixSy, supported by (i) its rough morphology observed by focused ion beam-scanning electron microscopy, (ii) the rapid decrease of Rinterface (interfacial resistance) in NaxSy-covered-Na symmetric cells with liquid electrolyte upon aging under open-circuit potential, and (iii) the increase of Rinterface in NaxSy-covered-Na solid-state symmetric cells with Na3PS4 electrolyte. The porous SEI allows the penetration of liquid electrolyte or alkali metal creep through its pores, resulting in a continuous chemical reaction. Hence, porosity of SEIs in general should be carefully taken into account in the application of batteries containing both liquid electrolyte and solid electrolyte.

Reversible Pressure-Dependent Mechanochromism of Dion-Jacobson and Ruddlesden-Popper Layered Hybrid Perovskites.

Layered Dion-Jacobson (DJ) and Ruddlesden-Popper (RP) hybrid perovskites are promising materials for optoelectronic applications due to their modular structure. To fully exploit their functionality, mechanical stimuli can be used to control their properties without changing the composition. However, the responsiveness of these systems to pressure compatible with practical applications (<1 GPa) remains unexploited. Hydrostatic pressure is used to investigate the structure-property relationships in representative iodide and bromide DJ and RP 2D perovskites based on 1,4-phenylenedimethylammonium (PDMA) and benzylammonium (BzA) spacers in the 0-0.35 GPa pressure range. Pressure-dependent X-ray scattering measurements reveal that lattices of these compositions monotonically shrink and density functional theory calculations provide insights into the structural changes within the organic spacer layer. These structural changes affect the optical properties; the most significant shift in the optical absorption is observed in (BzA)2 PbBr4 under 0.35 GPa pressure, which is attributed to an isostructural phase transition. Surprisingly, the RP and DJ perovskites behave similarly under pressure, despite the different binding modes of the spacer molecules. This study provides important insights into how the manipulation of the crystal structure affects the optoelectronic properties of such materials, whereas the reversibility of their response expands the perspectives for future applications.

The Role of Alkyl Chain Length and Halide Counter Ion in Layered Dion-Jacobson Perovskites with Aromatic Spacers.

Layered hybrid perovskites based on Dion-Jacobson phases are of interest to various optoelectronic applications. However, the understanding of their structure-property relationships remains limited. Here, we present a systematic study of Dion-Jacobson perovskites based on (S)PbX4 (n = 1) compositions incorporating phenylene-derived aromatic spacers (S) with different anchoring alkylammonium groups and halides (X = I, Br). We focus our study on 1,4-phenylenediammonium (PDA), 1,4-phenylenedimethylammonium (PDMA), and 1,4-phenylenediethylammonium (PDEA) spacers. Systems based on PDA did not form a well-defined layered structure, showing the formation of a 1D structure instead, whereas the extension of the alkyl chains to PDMA and PDEA rendered them compatible with the formation of a layered structure, as shown by X-ray diffraction and solid-state NMR spectroscopy. In addition, the control of the spacer length affects optical properties and environmental stability, which is enhanced for longer alkyl chains and bromide compositions. This provides insights into their design for optoelectronic applications.

Porosity of Solid Electrolyte Interphases on Alkali Metal Electrodes with Liquid Electrolytes.

Despite the fact that solid electrolyte interphases (SEIs) on alkali metals (Li and Na) are of great importance in the utilization of batteries with high energy density, growth mechanism of SEIs under an open-circuit potential important for the shelf life and the nature of ionic transport through SEIs are yet poorly understood. In this work, SEIs on Li/Na formed by bringing the electrodes in contact with ether- and carbonate-based electrolyte in symmetric cells were systematically investigated using diverse electrochemical/chemical characterization techniques. Electrochemical impedance spectroscopy (EIS) measurements linked with activation energy determination and cross-section images of Li/Na electrodes measured by ex situ FIB-SEM revealed the liquid/solid composite nature of SEIs, indicating their porosity. SEIs on Na electrodes are shown to be more porous compared to the ones on Li in both carbonate and glyme-based electrolytes. Nonpassivating nature of such SEIs is detrimental for the performance of alkali metal batteries. We laid special emphasis on evaluating time-dependent activation energy using EIS.

Synthesis and characterisation of two lithium-thiocyanate solvates with tetrahydrofuran: Li[SCN]·THF and Li[SCN]·2THF.

Li[SCN]·THF and Li[SCN]·2THF can be obtained from solutions of anhydrous Li[SCN] in tetrahydrofuran (C4H8O, THF). Both compounds are very hygroscopic and slowly decompose even at room temperature. At ambient conditions Li[SCN]·THF crystallizes in the monoclinic space group P21/c with the lattice parameters a = 574.41(2), b = 1643.11(6), c = 830.15(3) pm and ß = 99.009(1)° for Z = 4 as determined by laboratory X-ray powder diffraction. Its crystal structure contains Li+ cations surrounded by one THF molecule and three thiocyanate anions [SCN]- forming {Li[NCS]2[SCN](OC4H8)}2- tetrahedra, which join together as pairs via shared N⋯N edges. CHNS combustion analysis and vibrational spectroscopy confirmed its composition, whereas differential scanning calorimetry and thermogravimetric analysis coupled with a mass spectrometer were applied to record its thermal behaviour. Li[SCN]·2THF crystallises in a primitive monoclinic lattice as well, but in the space group P21/n with the lattice parameters a = 1132.73(3), b = 1637.98(3), c = 1264.88(2) pm and ß = 94.393(2)° for Z = 8 as determined from single-crystal X-ray diffraction data at 100 K. Its structure contains two crystallographically independent Li+-centred tetrahedra {Li[NCS]2(OC4H8)2}-, which form dimers {(C4H8O)2Li[µ2-NCS]2Li(OC4H8)2} via shared N⋯N edges. They are merely stabilised by weak agostic H⋯S interactions between some CH2-groups of the C4H8O molecules and the [NCS]- ligands.

Enhanced ion transport in Li2O and Li2S films.

Films of Li2O and Li2S grown by sputter deposition exhibit Li+ conductivity values at room temperature which are enhanced by 3-4 orders of magnitude relative to bulk samples. Possible mechanisms are discussed. The results may help explain the ion transport pathway through passivation layers containing these chalcogenides in batteries.

Synthesis, characterization and thermal behaviour of solid phases in the quasi-ternary system Mg(SCN)2-H2O-THF.

Mg(SCN)2·4H2O can be converted into previously unknown compounds Mg(SCN)2·(4 - x) H2O·xTHF with x = 0, 2 and 4 by multiple recrystallization in tetrahydrofuran (THF). The phases were characterized by infrared spectroscopy (IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), and their crystal structures were solved from X-ray powder diffraction (XRPD) data. In the crystal structures isolated Mg(NCS)2(H2O)4-x(THF)x units form layered motifs. The thermal behavior of Mg(SCN)2·4H2O and Mg(SCN)2·4THF was investigated by temperature dependent in situ XRPD, where Mg(SCN)2·4THF was found to acquire a room temperature (α-form) and high temperature modification (ß-form). The phase transformation is associated with an order-disorder transition of the THF molecules and with a reversion of the stacking order of the layered motifs. Further heating eventually leads to the formation of Mg(SCN)2·2THF. There thiocyanate related sulfur atoms fill the voids in the coordination sphere of magnesium, which leads to the formation of one dimensional electroneutral ∞[Mg(NCS)2/2(SCN)2/2(THF)2] chains. All investigated Mg(SCN)2·(4 - x) H2O·xTHF phases exhibit a remarkable anisotropic thermal expansion, and Mg(SCN)2·4H2O and Mg(SCN)2·2THF were found to show both positive and negative thermal expansion coefficients.