Investigation of Piezoelectric Properties in Ca-Doped PbBa(Zr,Ti)O3 (PBZT) Ceramics.

The perovskite-structured materials Pb0.75Ba0.251-xCax(Zr0.7Ti0.3)O3 for x = 1 and 2 at.% were synthesized using the conventional mixed-oxide method and carbonates. Microstructural analysis, performed using a scanning electron microscope, revealed rounded grains with relatively inhomogeneous sizes and distinct grain boundaries. X-ray diffraction confirmed that the materials exhibit a rhombohedral structure with an R3c space group at room temperature. Piezoelectric resonance measurements were conducted to determine the piezoelectric and elastic properties of the samples. The results indicated that a small amount of calcium doping significantly enhanced the piezoelectric coefficient d31. The calcium-doped ceramics exhibited higher electrical permittivity across the entire temperature range compared to the pure material, as well as a significant value of remanent polarization. These findings indicate that the performance parameters of the base material have been significantly improved, making these ceramics promising candidates for various applications.

Magnetic Properties of Gd-Doped Bi7Fe3Ti3O21 Aurivillius-Type Ceramics.

The magnetic properties of Aurivillius-phase Bi7Fe3Ti3O21 (BFT) and Bi7-xGdxFe3Ti3O21, where x = 0.2, 0.4, and 0.6 (BGFT), were investigated. Ceramic material undoped (BGF) and doped with Gd3+ ions were prepared by conventional solid-state reaction. In order to confirm that the obtained materials belong to Aurivillius structures, XRD tests were performed. The XRD results confirmed that both the undoped and the gadolinium-doped materials belong to the Aurivillius phases. The qualitative chemical composition of the obtained materials was confirmed based on EDS tests. The temperature dependences of magnetization and magnetic susceptibility were examined for the ceramic material both undoped and doped with Gd3+ ions. The measurements were taken in the temperature range from T = 10 K to T = 300 K. Using Curie's law, the value of the Curie constant was determined, and on its basis, the number of iron ions that take part in magnetic processes was calculated. The value of Curie constant C = 0.266 K, while the concentration of iron ions Fe3+, which influence the magnetic properties of the material, is equal 3.7 mol% (for BFT). Hysteresis loop measurements were also performed at temperatures of T = 10 K, T = 77 K, and T = 300 K. The dependence of magnetization on the magnetic field was described by the Brillouin function, and on its basis, the concentration of Fe3+ ions, which are involved in magnetic properties, was also calculated (3.4 mol% for BFT). Tests showed that the material is characterized by magnetic properties at low temperatures. At room temperature (RT), it has paramagnetic properties. It was also found that Gd3+ ions improve the magnetic properties of tested material.

The Electric Conductivity of Bi7Fe3Ti3O21 Doped with Gadolinium.

Bi7-xGdxFe3Ti3O21 (x = (0, 0.2, 0.4, 0.6)) bismuth-layered perovskite structure compounds have been successfully prepared by a solid-state reaction. The results of X-ray studies indicate that a single-phase ceramic was obtained, characterized by an orthorhombic crystal structure for all compounds within the Fm2m space group. Microstructural analysis revealed that introducing gadolinium to the material altered the grain morphology, resulting in a more rounded grain shape and a somewhat disordered arrangement. Moreover, with higher gadolinium concentrations, there is a noticeable increase in the presence of the number of large plates. Impedance spectroscopy has been used to characterize the electrical properties of Bi7-xGdxFe3Ti3O21 compounds.

Impedance Spectroscopy of Pr-Doped BaBi2Nb2O9 Aurivillius Ceramics.

Herein this study, the polycrystalline nature of the Aurivillius type structure is studied; primarily, the main objective is to observe the influence of dopant Pr3+ at the Ba2+-site of BaBi2Nb2O9 (BBN) ceramics. The ceramics under investigation were fabricated via the conventional solid-state reaction method. Scanning electron microscopy (SEM) and energy dispersion spectroscopy (EDS) techniques were used to analyse their morphological structure. It was found that the chemical composition of the ceramic samples corresponds well to the initial stoichiometry of the ceramic powders. An increase in praseodymium content caused a slight decrease in the average size of the ceramic grains. The obtained ceramic materials are described by a tetragonal structure with the space group I4/mmm. The electrical properties of the material have been studied using complex impedance spectroscopy methods in wide temperature and frequency ranges. The analysis of obtained results showed grains and grain boundaries contribute to conductive processes in the material. A possible 'hopping' mechanism for electrical transport processes in the system is evident from the analysis of results based on Joncher law.

The Effect of Pr Doping Contents on the Structural, Microstructure and Dielectric Properties of BaBi2Nb2O9 Aurivillius Ceramics.

Aurivillius BaBi2Nb2O9 and Ba1-xPrxBi2Nb2O9 ceramics were successfully synthesized by a simple solid state reaction method. Ceramics were prepared from reactants: Nb2O5, Bi2O3, BaCO3 and Pr2O3. The microstructure, structure, chemical composition, and dielectric properties of the obtained materials were examined. Dielectric properties were investigated in a wide range of temperatures (T = 20-500 °C) and frequencies (f = 0.1 kHz-1 MHz). The obtained ceramic materials belong to the group of layered perovskites, crystallizing in a tetragonal structure with the space group I4/mmm. Modification of the barium niobate compound with praseodymium ions influenced its dielectric properties and introducing a small concentration of the dopant ion causes a slight increase in the value of electric permittivity and shifts its maximum towards higher temperatures.

Synthesis and Photoluminescence Properties of Pr3+-Doped Ba0.5Ca0.5TixZr(1-x)O3 Perovskite Diphasic Ceramics Obtained by the Modified Pechini Method.

The Pr3+-doped solid solutions from (Ba,Ca)(Ti,Zr)O3 (BCTZO) system were successfully synthesized using an efficient and low-energy consuming route-the Pechini method combined with the sintering at relatively low temperature (1450 °C). The obtained materials were characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). The dielectric properties were systematically studied. The Pr3+-doped BCTZO diphasic material generates intense and broad red photoluminescence (PL) emission at room temperature. The optical properties were significantly improved with the Ti4+ substitution by Zr4+ ions. As a result, the Pr3+-doped (Ba,Ca)(Ti,Zr)O3 ceramics is a promising candidate for environmentally friendly, multifunctional material by combining good dielectric and photoluminescent properties with prognosis for the manifestation of strong photoluminescent and mechanoluminescent effects.

Fe-Doped Barium Lanthanum Titanate as a Competitor to Other Lead-Free Piezoelectric Ceramics.

Multiferroic solid solutions of Ba1-xLaxTi1-x/4O3 and iron (BLFT) were synthesized using the conventional mixed oxide method. The dependence of the piezoelectric coefficients on Fe content in BLFT ceramics was determined by the quasi-static and resonance method. The results indicate that 0.3 mol% addition of Fe3+ ions to the ceramic structure increased the value of the piezoelectric parameter d33 to the maximum of 159 pC/N. This puts BLFT ceramics among other good-quality and lead-free piezoelectric ceramics. A major enhancement of dielectric properties related to the manipulation of Fe content in the barium lanthanum titanate (BLT) ceramics system is reported as well.