Diblock Copolymers of Methacryloyloxyethyl Phosphorylcholine and Dopamine Methacrylamide: Synthesis and Real-Time Adsorption Dynamics by SEIRAS and RAIRS.

Amphiphilic diblock copolymers containing a block of 2-methacryloyloxyethyl phosphorylcholine (MPC) with unique properties to prevent nonspecific protein adsorption and enhance lubrication in aqueous media and a block of dopamine methacrylamide (DOPMA) distinguished by excellent adhesion performance were synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization for the first time. The DOPMA monomer with an acetonide-protected catechol group (acetonide-protected dopamine methacrylamide (ADOPMA)) was used, allowing the prevention of undesirable side reactions during polymerization and oxidation during storage. The adsorption behavior of the diblock copolymers with protected and unprotected catechol groups on gold surfaces was probed using attenuated total reflection (ATR)-Fourier transform infrared (FTIR) spectroscopy, surface-enhanced infrared absorption spectroscopy (SEIRAS), and reflection-absorption infrared spectroscopy (RAIRS). The copolymers pMPC-b-pADOPMA demonstrated physisorption with rapid adsorption and ultrasound-assisted desorption, while the copolymers pMPC-b-DOPMA exhibited chemical adsorption with slower dynamics but a stronger interaction with the gold surface. SEIRAS and RAIRS allowed proving the reorientation of the diblock copolymers during adsorption, demonstrating the exposure of the pMPC block toward the aqueous phase.

CP MAS kinetics in soft matter: Spin diffusion, local disorder and thermal equilibration in poly(2-hydroxyethyl methacrylate).

The 1H-13C cross-polarization magic angle spinning kinetics was studied in poly(2-hydroxyethyl methacrylate) (pHEMA), i.e. a soft material with high degrees of internal freedom and molecular disorder, having the purpose to track the influence of increasing local incoherent contributions to the effects of coherent nature in the open quantum spin systems. The experimental CP MAS kinetic curves were analyzed in the frame of the models of isotropic and anisotropic spin diffusion with thermal equilibration. The rates of spin diffusion and spin-lattice relaxation as well as the profiles of distribution of dipolar coupling, the parameters accounting the effective size of spin clusters and the local order parameters were determined. The intensities of the peaks of periodic quasi-equilibrium origin gradually decrease with increasing disorder, i.e. going from most ordered to more disordered sites in the polymer. Assuming that the thermal motion induced by the temperature gradients is much faster than the equilibration driven by spin diffusion due the difference in spin temperatures, it was deduced that the thermal equilibration in pHEMA occurs in the time scale of 10-4 s. This is one order of magnitude faster than the spectral spin diffusion, which occurs between spins having different resonance frequencies. The thermal equilibration in the case of remote spin clusters was described by the 'stretched exponent' decay. This led to the fractal dimension Dp ≈ 1.65 for both carbon sites (quaternary and carbonyl). The obtained Dp value corresponds to the aggregates, which images are very similar to those for pHEMA and some other related polymer structures are usually conceived.

Bioinspired Adhesion Polymers: Wear Resistance of Adsorption Layers.

Mussel adhesive polymers owe their ability to strongly bind to a large variety of surfaces under water to their high content of 3,4-dihydroxy-l-phenylalanine (DOPA) groups and high positive charge. In this work, we use a set of statistical copolymers that contain medium-length poly(ethylene oxide) side chains that are anchored to the surface in three different ways: by means of (i) electrostatic forces, (ii) catechol groups (as in DOPA), and (iii) the combination of electrostatic forces and catechol groups. A nanotribological scanning probe method was utilized to evaluate the wear resistance of the formed layers as a function of normal load. It was found that the combined measurement of surface topography and stiffness provided an accurate assessment of the wear resistance of such thin layers. In particular, surface stiffness maps allowed us to identify the initiation of wear before a clear topographical wear scar was developed. Our data demonstrate that the molecular and abrasive wear resistance on silica surfaces depends on the anchoring mode and follows the order catechol groups combined with electrostatic forces > catechol groups alone > electrostatic forces alone. The devised methodology should be generally applicable for evaluating wear resistance or "robustness" of thin adsorbed layers on a variety of surfaces.

Automated coating procedures to produce poly(ethylene glycol) brushes in fused-silica capillaries.

Many bioanalytical methods rely on electrophoretic separation of structurally labile and surface active biomolecules such as proteins and peptides. Often poor separation efficiency is due to surface adsorption processes leading to protein denaturation and surface fouling in the separation channel. Flexible and reliable approaches for preventing unwanted protein adsorption in separation science are thus in high demand. We therefore present new coating approaches based on an automated in-capillary surface-initiated atom transfer radical polymerization process (covalent coating) as well as by electrostatically adsorbing a presynthesized polymer leading to functionalized molecular brushes. The electroosmotic flow was measured following each step of the covalent coating procedure providing a detailed characterization and quality control. Both approaches resulted in good fouling resistance against the four model proteins cytochrome c, myoglobin, ovalbumin, and human serum albumin in the pH range 3.4-8.4. Further, even samples containing 10% v/v plasma derived from human blood did not show signs of adsorbing to the coated capillaries. The covalent as well as the electrostatically adsorbed coating were both found to be stable and provided almost complete suppression of the electroosmotic flow in the pH range 3.4-8.4. The coating procedures may easily be integrated in fully automated capillary electrophoresis methodologies.

Intracellular Delivery and Triggered Release of DNA Using Biodegradable Poly(2-hydroxypropylene imine)s Containing Cystamine Units.

Poly(2-hydroxypropylene imine)s containing segments of cystamine (PHPI-CA) are synthesized by polycondensation of 1,3-dibromo-2-propanol with a mixture of 1,3-diamino-2-propanol and cystamine. High molecular weight fractions of these polymers are collected by ultrafiltration and characterized by chemical analysis, 1 H and 13 C-NMR spectroscopy, size-exclusion chromatography with triple detection, and potentiometric titration, and are tested for DNA delivery in vitro. It is shown that PHPI-CA are highly branched polymers containing disulfide linkages. Transfection efficiency of PHPI-CA for DNA gives similar results to that of PHPI with GFP+ cell percent reaching 80-90%. Cytotoxicity levels for PHPI-CA are lower than that of PHPI. Novel polymers containing different amounts of disulfide linkages are able to disintegrate and release DNA following the treatment with reducing agent 1,4-dithiothreitol. Downstream application of PHPI-CA transfected cells for RNA purification shows that RNA yield is not affected even after the double transfection suggesting that these polymers could be great candidates for in vitro and in vivo transfection.

Temperature-Dependent Deicing Properties of Electrostatically Anchored Branched Brush Layers of Poly(ethylene oxide).

The hydration water of hydrophilic polymers freezes at subzero temperatures. The adsorption of such polymers will result in a hydrophilic surface layer that strongly binds water. Provided this interfacial hydration water remains liquidlike at subzero temperatures, its presence could possibly reduce ice adhesion, in particular, if the liquidlike layer is thicker than or comparable to the surface roughness. To explore this idea, a diblock copolymer, having one branched bottle-brush block of poly(ethylene oxide) and one linear cationic block, was electrostatically anchored on flat silica surfaces. The shear ice adhesion strength on such polymer-coated surfaces was investigated down to -25 °C using a homebuilt device. In addition, the temperature dependence of the ice adhesion on surfaces coated with only the cationic block, only the branched bottle-brush block, and with linear poly(ethylene oxide) was investigated. Significant ice adhesion reduction, in particular, at temperatures above -15 °C, was observed on silica surfaces coated with the electrostatically anchored diblock copolymer. Differential scanning calorimetry measurements on bulk polymer solutions demonstrate different thermal transitions of water interacting with branched and linear poly(ethylene oxide) (with hydration water melting points of about -18 and -10 °C, respectively). This difference is consistent with the low shear ice adhesion strength measured on surfaces carrying branched bottle-brush structured poly(ethylene oxide) at -10 °C, whereas no significant adhesion reduction was obtained with linear poly(ethylene oxide) at this temperature. We propose a lubrication effect of the hydration water bound to the branched bottle-brush structured poly(ethylene oxide), which, in the bulk, does not freeze until -18 °C.

Effect of structure of cationic comb copolymers on their adsorption and stabilization of titania nanoparticles.

Cationic linear polymer poly([2-(methacryloyloxy)ethyl] trimethylammonium chloride) p(METAC), neutral brush polymer poly(poly(ethylene glycol) methyl ether methacrylate) p(PEO22MEMA), and cationic comb copolymers p(METAC-PEO(x)MEMA) were used for the stabilization of titania dispersions under neutral and alkaline conditions. Random comb copolymers p(METAC-PEO(x)MEMA) differing in charge density and length of PEO side chains were synthesized by RAFT. The adsorption of cationic polymers on titania nanoparticles was evaluated by thermogravimetric analysis; changes in surface potential, by measuring the zeta potential; and the stability of the treated TiO2 dispersions, by laser diffraction and DLS. Cationic linear and comb copolymers containing relatively short PEO side chains promoted the inversion of nanoparticle surface potential from strongly negative (-60 mV) to moderately positive (10-35 mV). Cationic comb copolymers containing longer PEO side chains increased the zeta potential of the treated nanoparticles but did not invert it to positive. Aqueous dispersions of titania nanoparticles stabilized by cationic comb copolymers under alkaline conditions (pH 10) were dispersed by high-energy planetary ball milling up to a primary particle size of 20 nm and were stable for at least 2 days.

Association of anionic surfactant and physisorbed branched brush layers probed by neutron and optical reflectometry.

Pre-adsorbed branched brush layers were formed on silica surfaces by adsorption of a diblock copolymer consisting of a linear cationic block and an uncharged bottle-brush block. The charge of the silica surface was found to affect the adsorption, with lower amounts of the cationic polyelectrolyte depositing on less charged silica. Cleaning under basic conditions rendered surfaces more negatively charged (more negative zeta-potential) than acid cleaning and was therefore used to increase polyelectrolyte adsorption. The structure of adsorbed layers of the diblock copolymer was as determined by neutron reflectometry found to be about 70 nm thick and very water rich (97%). Interactions between the anionic surfactant sodium dodecylsulfate (SDS) and such pre-adsorbed diblock polymer layers were studied by neutron reflectometry and by optical reflectometry. Optical reflectometry was also used for deducing interactions between the individual blocks of the diblock copolymer and SDS at the silica/aqueous interface. We find that SDS is readily incorporated in the diblock copolymer layer at low SDS concentrations, and preferentially co-localized with the cationic block of the polymer next to the silica surface. At higher SDS concentrations some desorption of polyelectrolyte/surfactant complexes takes place.

Electrostatically anchored branched brush layers.

A novel type of block copolymer has been synthesized. It consists of a linear cationic block and an uncharged bottle-brush block. The nonionic bottle-brush block contains 45 units long poly(ethylene oxide) side chains. This polymer was synthesized with the intention of creating branched brush layers firmly physisorbed to negatively charged surfaces via the cationic block, mimicking the architecture (but not the chemistry) of bottle-brush molecules suggested to be present on the cartilage surface, and contributing to the efficient lubrication of synovial joints. The adsorption properties of the diblock copolymer as well as of the two blocks separately were studied on silica surfaces using quartz crystal microbalance with dissipation monitoring (QCM-D) and optical reflectometry. The adsorption kinetics data highlight that the diblock copolymers initially adsorb preferentially parallel to the surface with both the cationic block and the uncharged bottle-brush block in contact with the surface. However, as the adsorption proceeds, a structural change occurs within the layer, and the PEO bottle-brush block extends toward solution, forming a surface-anchored branched brush layer. As the adsorption plateau is reached, the diblock copolymer layer is 46-48 nm thick, and the water content in the layer is above 90 wt %. The combination of strong electrostatic anchoring and highly hydrated branched brush structures provide strong steric repulsion, low friction forces, and high load bearing capacity. The strong electrostatic anchoring also provides high stability of preadsorbed layers under different ionic strength conditions.

Adsorption and solution properties of bottle-brush polyelectrolyte complexes: effect of molecular weight and stoichiometry.

Polyelectrolyte complexes (PECs) self-assembled from bottle-brush polyelectrolytes, having a cationic main chain and uncharged side chains, and linear anionic sodium polystyrenesulfonate (NaPSS) have been investigated with emphasis on (i) the charge density and side chain density of the bottle-brush polyelectrolyte, (ii) the molecular weight of NaPSS, and (iii) the charge stoichiometry of the mixture. Light scattering and electrophoretic mobility data demonstrate that small molecular complexes are formed when the PEO45 side chain density is sufficiently high to provide steric stabilization and prevent PEC aggregation. The adsorption of PECs on negatively charged silicon oxynitride was investigated using dual polarization interferometry, and the time evolution of the adsorbed amount and thickness was determined. Cationic, uncharged, and negatively charged complexes all adsorb to negatively charged silicon oxynitride, and maximum adsorption is achieved for positively charged complexes containing small amounts of PSS. The adsorbed amount and the kinetics of adsorption are reduced with increasing PSS content, and for any given stoichiometry with increasing PSS molecular weight. These findings are discussed in terms of the PEC structure and the ability of anionic polyelectrolytes to leave the PECs during adsorption.

Adsorption characteristics of stoichiometric and nonstoichiometric molecular polyelectrolyte complexes on silicon oxynitride surfaces.

Adsorption properties of stoichiometric and nonstoichiometric polyelectrolyte complexes (PECs) have been investigated by means of dual polarization interferometry (DPI) and X-ray photoelectron spectroscopy (XPS). Poly(sodium styrenesulfonate) (NaPSS) of molecular weight 4300 g/mol was used as polyanion, and two bottle-brush copolymers possessing different molar ratios of the cationic segment methacryloxyethyltrimethylammonium chloride (METAC) and the nonionic segment poly(ethylene oxide) methyl ether methacrylate (PEO(45)MEMA) were used as polycations. They are referred to as PEO(45)MEMA:METAC-25 and PEO(45)MEMA:METAC-50, where the last digits denote the mol % of charged main-chain segments. The time evolution of the adsorbed amount, thickness, and refractive index of the PEC layers were determined in aqueous solution using DPI. We demonstrate that cationic, uncharged, and negatively charged complexes adsorb to negatively charged silicon oxynitride and that maximum adsorption is achieved when small amounts of PSS are present in the complexes. The surface composition of the adsorbed PEC layers was estimated from XPS measurements that demonstrated very low content of NaPSS. On the basis of these data, the PEC adsorption mechanism is discussed and the competition between PSS and negative surface sites for association with the cationic polyelectrolyte is identified as a key issue.

Efficient gene transfection using novel cationic polymers poly(hydroxyalkylene imines).

A series of novel cationic polymers poly(hydroxyalkylene imines) were synthesized and tested for their ability to transfect cells in vitro and in vivo. Poly(hydroxyalkylene imines), in particular, poly(2-hydroxypropylene imine) (pHP), poly(2-hydroxypropylene imine ethylene imine) (pHPE), and poly(hydroxypropylene imine propylene imine) (pHPP) were synthesized by polycondensation reaction from 1,3-diamino-2-propanol and the appropriate dibromide. Electron microscopic examination demonstrated that the resulting polymers condensed DNA into toroid shape complexes of 100-150 nm in size. Transfection studies showed that all three polymers were able to deliver genetic material into the cell, with pHP being superior to pHPP and pHPE. pHP acted as an efficient gene delivery agent in a variety of different cell lines and outcompeted most of the widely used polymer or lipid based transfection reagents. Intravenous administration of pHP-DNA polyplexes in mice followed by the reporter gene analysis showed that the reagent was suitable for in vivo applications. In summary, the results indicate that pHP is a new efficient reagent for gene delivery in vitro and in vivo.

Protein interactions with bottle-brush polymer layers: Effect of side chain and charge density ratio probed by QCM-D and AFM.

Silica surfaces were coated with a range of cationic bottle-brush polymers with 45 units long poly(ethylene oxide) side chains, and their efficiency in reducing protein adsorption was probed by QCM-D, reflectometry and AFM. Preadsorbed layers formed by bottle-brush polymers with different side chain to charge ratio was exposed to two proteins with different net charge, lysozyme and BSA. The reduction in protein adsorption was found to depend on both the type of protein and on the nature of the polyelectrolyte layer. The most pronounced reduction in protein adsorption was achieved when the fraction of charged backbone segments was in the range 0.25-0.5 equivalent to a fraction of poly(ethylene oxide) side chains of 0.75-0.5. It was concluded that these polymers have enough electrostatic attachment points to ensure a strong binding to the surface, and at the same time a sufficient amount of poly(ethylene oxide) side chains to counteract protein adsorption. In contrast, a layer formed by a highly charged polyelectrolyte without side chains was unable to resists protein adsorption. On such a layer the adsorption of negatively charged BSA was strongly enhanced, and positively charged lysozyme adsorbed to a similar extent as to bare silica. AFM colloidal probe force measurement between silica surfaces with preadsorbed layers of bottle-brush polymers were conducted before and after exposure to BSA and lysozyme to gain insight into how proteins were incorporated in the bottle-brush polymer layers.

Adsorption characteristics of brush polyelectrolytes on silicon oxynitride revealed by dual polarization interferometry.

Adsorption properties of bottle-brush polyelectrolytes have been investigated using dual polarization interferometry (DPI), which provides real time monitoring of adsorbed layer thickness and refractive index. The adsorption on silicon oxynitride was carried out from aqueous solution with no added inorganic salt, and the adsorbed polyelectrolyte layer was subsequently rinsed with NaCl solutions of increasing concentration. The bottle-brush polyelectrolytes investigated in this study have different ratios of permanent cationic charged segments and uncharged PEO side chains. Both the cationic groups and the PEO side chains have affinity for silica-like surfaces, and thus contribute to the adsorption process that becomes rather complex. Adsorption properties in water, responses to changes in ionic strength of the surrounding medium, adsorption kinetics and the layer structure are all strongly dependent on the ratio between backbone charges and side chains. The results are interpreted in terms of competitive adsorption of segments with different chemical nature. The adsorption kinetics is relatively fast, taking only tens to hundreds of seconds when adsorbed from dilute 100 ppm solutions. The DPI technique was found to be suitable for studying such rapid adsorption processes, including determination of the initial adsorption kinetics. We expect that the effects observed in this study are of general importance for synthetic and biological polymers carrying segments of different nature.

Effect of graft density on the nonionic bottle brush polymer/surfactant interaction.

The effect of graft density on the interaction of nonionic bottle brush polymers with an anionic surfactant (sodium dodecyl sulfate) was investigated. The graft density of 45 units long poly(ethylene oxide) (PEO) side chains was varied in a wide range (30, 50, 75, 90, and 100%) on a methacrylate type polymer backbone. The surfactant binding isotherms were determined by the potentiometric method in the presence of 0.1 M sodium bromide. It was found that due to the grafting of the PEO chains to a polymer backbone the surfactant binding becomes significantly suppressed. The amount of bound surfactant at the critical micelle concentration (cmc) decreases almost 2 orders of magnitude compared to the binding on a linear PEO having a similar molecular weight. The binding of the surfactant was found to occur in cooperative fashion, though the critical aggregation concentration (cac) of the binding was found surprisingly small. This result was interpreted in terms of the surfactant aggregation numbers that were found much smaller in the case of the bottle brush polymers than in the case of linear PEOs due to the steric crowding of the grafted PEO chains. To confirm the results of the binding isotherm measurements, steady-state fluorescence probe (pyrene) measurements as well as static and dynamic light scattering measurements were performed.

Formation and stability of water-soluble, molecular polyelectrolyte complexes: effects of charge density, mixing ratio, and polyelectrolyte concentration.

The formation of complexes with stoichiometric (1:1) as well as nonstoichiometric (2:1) and (1:2) compositions between oppositely charged synthetic polyelectrolytes carrying strong ionic groups and significantly different molecular weights is reported in this contribution. Poly(sodium styrenesulfonate) (NaPSS) was used as polyanion, and a range of copolymers with various molar ratios of the poly(methacryloxyethyltrimethylammonium) chloride, poly(METAC), and the nonionic poly(ethylene oxide) ether methacrylate, poly(PEO45MEMA), were used as polycations. Formation and stability of PECs have been investigated by dynamic and static light scattering (LS), turbidity, and electrophoretic mobility measurements as a function of polyelectrolyte solution concentration, charge density of the cationic polyelectrolyte, and mixing ratio. The data obtained demonstrate that in the absence of PEO45 side chains the 100% charged polymer (polyMETAC) formed insoluble PECs with PSS that precipitate from solution when exact stoichiometry is achieved. In nonstoichiometric complexes (1:2) and (2:1) large colloidally stable aggregates were formed. The presence of even a relatively small amount of PEO45 side chains (25%) in the cationic copolymer was sufficient for preventing precipitation of the formed stoichiometric and nonstoichiometric complexes. These PEC's are sterically stabilized by the PEO45 chains. By further increasing the PEO45 side-chain content (50 and 75%) of the cationic copolymer, small, water-soluble molecular complexes could be formed. The data suggest that PSS molecules and the charged backbone of the cationic brush form a compact core, and with sufficiently high PEO45 chain density (above 25%) molecular complexes are formed that are stable over prolonged times.

Competitive adsorption of neutral comb polymers and sodium dodecyl sulfate at the air/water interface.

The interfacial behavior of aqueous solutions of four different neutral polymers in the presence of sodium dodecyl sulfate (SDS) has been investigated by surface tension measurements and ellipsometry. The polymers comprised linear poly(ethylene oxide) with low and high molecular masses (10(3) and 10(6) Dalton (Da), respectively), and two high molecular mass methacrylate-based comb polymers containing poly(ethylene oxide) side chains. The adsorption isotherms of SDS, determined by Gibbs analysis of surface tension data, are nearly the same in the presence of the high molecular mass linear polymer and the comb polymers. Analysis of the ellipsometric data reveals that while a single surface layer model is appropriate for films of polymer alone, a more sophisticated interfacial layer model is necessary for films of SDS alone. For the polymer/surfactant mixtures, a novel semiempirical approach is proposed to determine the surface excess of polymer, and hence quantify the interfacial composition, through analysis of data from the two techniques. The replacement of the polymer due to surfactant adsorption is much less pronounced for the high molecular mass linear polymer and for the comb polymers than for the low molecular mass linear polymer. This finding is rationalized by the significantly higher adsorption driving force of the larger polymer molecules as well as by their more amphiphilic structure in the case of the comb polymers.

Effect of polymer architecture on the adsorption properties of a nonionic polymer.

The adsorption of a linear- and bottle-brush poly(ethylene oxide (PEO))-based polymer, having comparable molecular weights, was studied by means of quartz crystal microbalance with dissipation monitoring ability (QCM-D) and AFM colloidal probe force measurements. The energy dissipation change monitored by QCM-D and the range of the steric forces obtained from force measurements demonstrated that linear PEO forms a more extended adsorption layer than the bottle-brush polymer, despite that the adsorbed mass is higher for the latter. Competitive adsorption studies revealed that linear PEO is readily displaced from the interface by the bottle-brush polymer. This was attributed to the higher surface affinity of the latter, which is governed by the number of contact points between the polymers and the interface, and the smaller loss of conformational entropy.

Desorption of bottle-brush polyelectrolytes from silica by addition of linear polyelectrolytes studied by QCM-D and reflectometry.

The possibility of exchanging adsorbed layers of PEO(45)MEMA:METAC-X brush polyelectrolytes (with two different charge densities, 10 and 75 mol%, denoted by X), with poly(MAPTAC), a highly charged linear polyelectrolyte, was investigated by quartz crystal microbalance with dissipation and reflectometry. The studies were conducted on a silica substrate at pH 10, conditions under which only electrostatic interactions are effective in the adsorption process. Based on the results, it was concluded that PEO(45)MEMA:METAC-10 forms an inhomogeneous layer at the interface through which poly(MAPTAC) chains can easily diffuse to reach the surface. On the other hand, the PEO(45)MEMA:METAC-75 layer was not affected when exposed to a poly(MAPTAC) solution. We argue that the observed effect for PEO(45)MEMA:METAC-75 is due to the formation of a homogeneous protective brush layer, in combination with the small difference in surface affinity between the bottle-brush polyelectrolyte and poly(MAPTAC), together with the difficulty of displacing highly charged polyelectrolyte chains once they are adsorbed on the oppositely charged surface. We also use the combination of QCM-D and reflectometry data to calculate the water content and layer thickness of the adsorbed layers.

Adsorption characteristics of bottle-brush polymers on silica: effect of side chain and charge density.

The adsorption behavior of bottle-brush polymers with different charge/PEO ratio on silica was studied using optical reflectometry and QCM-D. The results obtained under different solution conditions clearly demonstrate the existence of two distinct adsorption mechanisms depending on the ratio of charge/PEO. In the case of low-charge density brush polymers (0-10 mol %), the adsorption occurs predominantly through the PEO side chains. However, the presence of a small amount of charge along the backbone (as low as 2 mol %) increases the adsorption significantly above that of the uncharged bottle-brush polymer in pure water. As the charge density of the brush polymers is increased to 25 mol % or larger the adsorption occurs predominantly through electrostatic interactions. The adsorbed layer structure was studied by measuring the layer dissipation using QCM-D. The adsorbed layer formed by the uncharged brush polymer dissipates only a small amount of energy that indicates that the brush lie along the surface, the scenario in which the maximum number of PEO side chains interact with the surface. The adsorbed layers formed by the low-charge density brush polymers (2-10 mol %) in water are more extended, which results in large energy dissipation, whereas those formed by the high-charge density brush polymers (50-100 mol %) have their backbone relatively flat on the surface and the energy dissipation is again low.