Trace vapor generator for Explosives and Narcotics (TV-Gen).

The Trace Vapor Generator for Explosives and Narcotics (TV-Gen) is a portable and compact instrument designed to deliver a continuous source of trace-level vapors and vapor mixtures. It provides a tool to assist in the independent validation and verification of new materials and sensors under development for the vapor detection of explosives and narcotics. The design was conceived for use with a broad range of analytes, detection systems, materials, and sensors and to switch easily between the clean and analyte vapor streams. The TV-Gen system utilizes nebulization of aqueous analyte solutions, an oven to promote efficient transport, and a control box that provides dedicated computer control with logging capabilities. Resultant vapor streams are stable over several hours, with the vapor concentration controlled by a combination of aqueous analyte solution concentration, liquid flow rate through the nebulizer, and volume flow rate of air through the TV-Gen manifold.

Mixed Vapor Generation Device for delivery of homemade explosives vapor plumes.

While there is a large body of research on the properties and detection of traditional military high explosives and propellant low explosives, there is a dearth of research on homemade explosive (HME) materials, though they are prevalent today. The safety of working with these materials in the laboratory is the greatest limiting factor preventing HME research. A vapor delivery tool, the Mixed Vapor Generation Device (MV-Gen), was designed to safely contain the individual solid or liquid components that often compose homemade explosives vapor plumes and deliver the mixed component vapors for instrumental sampling and analysis. Within the MV-Gen, each component is separated and only the vapors mix as they are carried through the device by flowing air. The resulting mixed vapor is representative of either mixed explosive material or bulk explosives. Component materials are held in up to four individual, removable vials with vapor concentrations controlled by vial orifice size, temperature, and diluent airflow. The total concentration can be adjusted by altering vial temperature via a thermal water jacket surrounding the entirety of the device, or by adjusting the flow rate of diluent air through the device. The MV-Gen was evaluated first with surrogate compounds, followed by two types of homemade explosives, to include a binary explosive mixture and a peroxide explosive. To evaluate the device, vapors were cold-trapped on an online sampling system and analyzed by gas chromatography/mass spectrometry. It was determined that the device yielded reproducible vapor concentrations of both single and mixed components, and the ratio of these vapors can be easily adjusted to mimic varying forms of homemade explosives.

Trace explosives sensor testbed (TESTbed).

A novel vapor delivery testbed, referred to as the Trace Explosives Sensor Testbed, or TESTbed, is demonstrated that is amenable to both high- and low-volatility explosives vapors including nitromethane, nitroglycerine, ethylene glycol dinitrate, triacetone triperoxide, 2,4,6-trinitrotoluene, pentaerythritol tetranitrate, and hexahydro-1,3,5-trinitro-1,3,5-triazine. The TESTbed incorporates a six-port dual-line manifold system allowing for rapid actuation between a dedicated clean air source and a trace explosives vapor source. Explosives and explosives-related vapors can be sourced through a number of means including gas cylinders, permeation tube ovens, dynamic headspace chambers, and a Pneumatically Modulated Liquid Delivery System coupled to a perfluoroalkoxy total-consumption microflow nebulizer. Key features of the TESTbed include continuous and pulseless control of trace vapor concentrations with wide dynamic range of concentration generation, six sampling ports with reproducible vapor profile outputs, limited low-volatility explosives adsorption to the manifold surface, temperature and humidity control of the vapor stream, and a graphical user interface for system operation and testing protocol implementation.

Continuous flow, explosives vapor generator and sensor chamber.

A novel liquid injection vapor generator (LIVG) is demonstrated that is amenable to low vapor pressure explosives, 2,4,6-trinitrotoluene and hexahydro-1,3,5-trinitro-1,3,5-triazine. The LIVG operates in a continuous manner, providing a constant and stable vapor output over a period of days and whose concentration can be extended over as much as three orders of magnitude. In addition, a large test atmosphere chamber attached to the LIVG is described, which enables the generation of a stable test atmosphere with controllable humidity and temperature. The size of the chamber allows for the complete insertion of testing instruments or arrays of materials into a uniform test atmosphere, and various electrical feedthroughs, insertion ports, and sealed doors permit simple and effective access to the sample chamber and its vapor.

Reusable, compression-sealed fluid cells for surface mounting to planar substrates.

We have developed a universal structure and mechanism for the repeatable, rapid-attachment of a fluid cell to a planar substrate. The fluid cell and all fluidic connections are completely contained in a plastic body such that attachment requires neither adhesives nor modification of the substrate. The geometry of the fluid cell is defined by the active area of the planar substrate (e.g. a sensor array). All required components have been quickly prototyped using Computer Numerical Control (CNC) machining. It is also straight-forward to create an array of fluid cells to attach to a single substrate (e.g. a standard microscope slide). All components are easy to assemble and can be cleaned and reused, making this flexible approach applicable for a wide range of lab-on-a-chip applications.