Synthesis, Structure, and Properties of CuBiSeCl2: A Chalcohalide Material with Low Thermal Conductivity.

Mixed anion halide-chalcogenide materials have recently attracted attention for a variety of applications, owing to their desirable optoelectronic properties. We report the synthesis of a previously unreported mixed-metal chalcohalide material, CuBiSeCl2 (Pnma), accessed through a simple, low-temperature solid-state route. The physical structure is characterized through single-crystal X-ray diffraction and reveals significant Cu displacement within the CuSe2Cl4 octahedra. The electronic structure of CuBiSeCl2 is investigated computationally, which indicates highly anisotropic charge carrier effective masses, and by experimental verification using X-ray photoelectron spectroscopy, which reveals a valence band dominated by Cu orbitals. The band gap is measured to be 1.33(2) eV, a suitable value for solar absorption applications. The electronic and thermal properties, including resistivity, Seebeck coefficient, thermal conductivity, and heat capacity, are also measured, and it is found that CuBiSeCl2 exhibits a low room temperature thermal conductivity of 0.27(4) W K-1 m-1, realized through modifications to the phonon landscape through increased bonding anisotropy.

A high throughput synthetic workflow for solid state synthesis of oxides.

High-throughput synthetic methods are well-established for chemistries involving liquid- or vapour-phase reagents and have been harnessed to prepare arrays of inorganic materials. The versatile but labour-intensive sub-solidus reaction pathway that is the backbone of the functional and electroceramics materials industries has proved more challenging to automate because of the use of solid-state reagents. We present a high-throughput sub-solidus synthesis workflow that permits rapid screening of oxide chemical space that will accelerate materials discovery by enabling simultaneous expansion of explored compositions and synthetic conditions. This increases throughput by using manual steps where actions are undertaken on multiple, rather than individual, samples which are then further combined with researcher-hands-free automated processes. We exemplify this by extending the BaYxSn1-xO3-x/2 solid solution beyond the reported limit to a previously unreported composition and by exploring the Nb-Al-P-O composition space showing the applicability of the workflow to polyanion-based compositions beyond oxides.

Superionic lithium transport via multiple coordination environments defined by two-anion packing.

Fast cation transport in solids underpins energy storage. Materials design has focused on structures that can define transport pathways with minimal cation coordination change, restricting attention to a small part of chemical space. Motivated by the greater structural diversity of binary intermetallics than that of the metallic elements, we used two anions to build a pathway for three-dimensional superionic lithium ion conductivity that exploits multiple cation coordination environments. Li7Si2S7I is a pure lithium ion conductor created by an ordering of sulphide and iodide that combines elements of hexagonal and cubic close-packing analogously to the structure of NiZr. The resulting diverse network of lithium positions with distinct geometries and anion coordination chemistries affords low barriers to transport, opening a large structural space for high cation conductivity.

Band Structure Engineering of Bi4O4SeCl2 for Thermoelectric Applications.

The mixed anion material Bi4O4SeCl2 has an ultralow thermal conductivity of 0.1 W m-1 K-1 along its stacking axis (c axis) at room temperature, which makes it an ideal candidate for electronic band structure optimization via doping to improve its thermoelectric performance. Here, we design and realize an optimal doping strategy for Bi4O4SeCl2 from first principles and predict an enhancement in the density of states at the Fermi level of the material upon Sn and Ge doping. Experimental work realizes the as-predicted behavior in Bi4-x Sn x O4SeCl2 (x = 0.01) through the precise control of composition. Careful consideration of multiple accessible dopant sites and charge states allows for the effective computational screening of dopants for thermoelectric properties in Bi4O4SeCl2 and may be a suitable route for assessing other candidate materials.

Predicting spinel solid solutions using a random atom substitution method.

Exploration of chemical composition and structural configuration space is the central problem in crystal structure prediction. Even in limiting structure space to a single structure type, many different compositions and configurations are possible. In this work, we attempt to address this problem using an extension to the existing ChemDASH code in which variable compositions can be explored. We show that ChemDASH is an efficient method for exploring a fixed-composition space of spinel structures and build upon this to include variable compositions in the Mn-Fe-Zn-O spinel phase field. This work presents the first basin-hopping crystal structure prediction method that can explore variable compositions.

Cation Disorder and Large Tetragonal Supercell Ordering in the Li-Rich Argyrodite Li7Zn0.5SiS6.

A tetragonal argyrodite with >7 mobile cations, Li7Zn0.5SiS6, is experimentally realized for the first time through solid state synthesis and exploration of the Li-Zn-Si-S phase diagram. The crystal structure of Li7Zn0.5SiS6 was solved ab initio from high-resolution X-ray and neutron powder diffraction data and supported by solid-state NMR. Li7Zn0.5SiS6 adopts a tetragonal I4 structure at room temperature with ordered Li and Zn positions and undergoes a transition above 411.1 K to a higher symmetry disordered F43m structure more typical of Li-containing argyrodites. Simultaneous occupation of four types of Li site (T5, T5a, T2, T4) at high temperature and five types of Li site (T5, T2, T4, T1, and a new trigonal planar T2a position) at room temperature is observed. This combination of sites forms interconnected Li pathways driven by the incorporation of Zn2+ into the Li sublattice and enables a range of possible jump processes. Zn2+ occupies the 48h T5 site in the high-temperature F43m structure, and a unique ordering pattern emerges in which only a subset of these T5 sites are occupied at room temperature in I4 Li7Zn0.5SiS6. The ionic conductivity, examined via AC impedance spectroscopy and VT-NMR, is 1.0(2) × 10-7 S cm-1 at room temperature and 4.3(4) × 10-4 S cm-1 at 503 K. The transition between the ordered I4 and disordered F43m structures is associated with a dramatic decrease in activation energy to 0.34(1) eV above 411 K. The incorporation of a small amount of Zn2+ exercises dramatic control of Li order in Li7Zn0.5SiS6 yielding a previously unseen distribution of Li sites, expanding our understanding of structure-property relationships in argyrodite materials.

Chemical Control of the Dimensionality of the Octahedral Network of Solar Absorbers from the CuI-AgI-BiI3 Phase Space by Synthesis of 3D CuAgBiI5.

A newly reported compound, CuAgBiI5, is synthesized as powder, crystals, and thin films. The structure consists of a 3D octahedral Ag+/Bi3+ network as in spinel, but occupancy of the tetrahedral interstitials by Cu+ differs from those in spinel. The 3D octahedral network of CuAgBiI5 allows us to identify a relationship between octahedral site occupancy (composition) and octahedral motif (structure) across the whole CuI-AgI-BiI3 phase field, giving the ability to chemically control structural dimensionality. To investigate composition-structure-property relationships, we compare the basic optoelectronic properties of CuAgBiI5 with those of Cu2AgBiI6 (which has a 2D octahedral network) and reveal a surprisingly low sensitivity to the dimensionality of the octahedral network. The absorption onset of CuAgBiI5 (2.02 eV) barely changes compared with that of Cu2AgBiI6 (2.06 eV) indicating no obvious signs of an increase in charge confinement. Such behavior contrasts with that for lead halide perovskites which show clear confinement effects upon lowering dimensionality of the octahedral network from 3D to 2D. Changes in photoluminescence spectra and lifetimes between the two compounds mostly derive from the difference in extrinsic defect densities rather than intrinsic effects. While both materials show good stability, bulk CuAgBiI5 powder samples are found to be more sensitive to degradation under solar irradiation compared to Cu2AgBiI6.

Discovery of a Low Thermal Conductivity Oxide Guided by Probe Structure Prediction and Machine Learning.

We report the aperiodic titanate Ba10 Y6 Ti4 O27 with a room-temperature thermal conductivity that equals the lowest reported for an oxide. The structure is characterised by discontinuous occupancy modulation of each of the sites and can be considered as a quasicrystal. The resulting localisation of lattice vibrations suppresses phonon transport of heat. This new lead material for low-thermal-conductivity oxides is metastable and located within a quaternary phase field that has been previously explored. Its isolation thus requires a precisely defined synthetic protocol. The necessary narrowing of the search space for experimental investigation was achieved by evaluation of titanate crystal chemistry, prediction of unexplored structural motifs that would favour synthetically accessible new compositions, and assessment of their properties with machine-learning models.

Highly Absorbing Lead-Free Semiconductor Cu2AgBiI6 for Photovoltaic Applications from the Quaternary CuI-AgI-BiI3 Phase Space.

Since the emergence of lead halide perovskites for photovoltaic research, there has been mounting effort in the search for alternative compounds with improved or complementary physical, chemical, or optoelectronic properties. Here, we report the discovery of Cu2AgBiI6: a stable, inorganic, lead-free wide-band-gap semiconductor, well suited for use in lead-free tandem photovoltaics. We measure a very high absorption coefficient of 1.0 × 105 cm-1 near the absorption onset, several times that of CH3NH3PbI3. Solution-processed Cu2AgBiI6 thin films show a direct band gap of 2.06(1) eV, an exciton binding energy of 25 meV, a substantial charge-carrier mobility (1.7 cm2 V-1 s-1), a long photoluminescence lifetime (33 ns), and a relatively small Stokes shift between absorption and emission. Crucially, we solve the structure of the first quaternary compound in the phase space among CuI, AgI and BiI3. The structure includes both tetrahedral and octahedral species which are open to compositional tuning and chemical substitution to further enhance properties. Since the proposed double-perovskite Cs2AgBiI6 thin films have not been synthesized to date, Cu2AgBiI6 is a valuable example of a stable Ag+/Bi3+ octahedral motif in a close-packed iodide sublattice that is accessed via the enhanced chemical diversity of the quaternary phase space.

Crystal Structure and Stoichiometric Composition of Potassium-Intercalated Tetracene.

The products of the solid-state reactions between potassium metal and tetracene (K:Tetracene, 1:1, 1.5:1, and 2:1) are fully structurally characterized. Synchrotron X-ray powder diffraction shows that only K2Tetracene forms under the reaction conditions studied, with unreacted tetracene always present for x < 2. Diffraction and 13C MAS NMR show that K2Tetracene has a crystal structure that is analogous to that of K2Pentacene, but with the cations ordered on two sites because of the influence of the length of the hydrocarbon on possible cation positions. K2Tetracene is a nonmagnetic insulator, thus further questioning the nature of reported superconductivity in this class of materials.

One class classification as a practical approach for accelerating π-π co-crystal discovery.

The implementation of machine learning models has brought major changes in the decision-making process for materials design. One matter of concern for the data-driven approaches is the lack of negative data from unsuccessful synthetic attempts, which might generate inherently imbalanced datasets. We propose the application of the one-class classification methodology as an effective tool for tackling these limitations on the materials design problems. This is a concept of learning based only on a well-defined class without counter examples. An extensive study on the different one-class classification algorithms is performed until the most appropriate workflow is identified for guiding the discovery of emerging materials belonging to a relatively small class, that being the weakly bound polyaromatic hydrocarbon co-crystals. The two-step approach presented in this study first trains the model using all the known molecular combinations that form this class of co-crystals extracted from the Cambridge Structural Database (1722 molecular combinations), followed by scoring possible yet unknown pairs from the ZINC15 database (21 736 possible molecular combinations). Focusing on the highest-ranking pairs predicted to have higher probability of forming co-crystals, materials discovery can be accelerated by reducing the vast molecular space and directing the synthetic efforts of chemists. Further on, using interpretability techniques a more detailed understanding of the molecular properties causing co-crystallization is sought after. The applicability of the current methodology is demonstrated with the discovery of two novel co-crystals, namely pyrene-6H-benzo[c]chromen-6-one (1) and pyrene-9,10-dicyanoanthracene (2).

Modular Design via Multiple Anion Chemistry of the High Mobility van der Waals Semiconductor Bi4O4SeCl2.

Making new van der Waals materials with electronic or magnetic functionality is a chemical design challenge for the development of two-dimensional nanoelectronic and energy conversion devices. We present the synthesis and properties of the van der Waals material Bi4O4SeCl2, which is a 1:1 superlattice of the structural units present in the van der Waals insulator BiOCl and the three-dimensionally connected semiconductor Bi2O2Se. The presence of three anions gives the new structure both the bridging selenide anion sites that connect pairs of Bi2O2 layers in Bi2O2Se and the terminal chloride sites that produce the van der Waals gap in BiOCl. This retains the electronic properties of Bi2O2Se while reducing the dimensionality of the bonding network connecting the Bi2O2Se units to allow exfoliation of Bi4O4SeCl2 to 1.4 nm height. The superlattice structure is stabilized by the configurational entropy of anion disorder across the terminal and bridging sites. The reduction in connective dimensionality with retention of electronic functionality stems from the expanded anion compositional diversity.

Detection and Crystal Structure of Hydrogenated Bipentacene as an Intermediate in Thermally Induced Pentacene Oligomerization.

6,6',13,13'-Tetrahydro-6,6'-bipentacene (HBP), the intermediate molecule connecting pentacene to previously observed peripentacene and extended pentacene oligomers through the formation of a carbon-carbon bond, is synthesized and crystallographically characterized. Heating pentacene to 300 °C under vacuum for 200 h results in pale golden crystals of HBP and amorphous material containing pentacene oligomers, offering experimental evidence that pentacene preferentially dimerizes at the 6,6'-position. Continued heating of HBP results in co-crystals of 6,13-dihydrogenated pentacene and pentacene and further amorphous pentacene oligomers. The amorphous material consists of layered carbonaceous species with a graphenic nature, as determined by Raman spectroscopy and electron microscopy, and suggests HBP as an intermediate to hydrogenated pentacene species and pentacene oligomers, such as peripentacene, of interest in organic electronics.

Reactivity of Solid Rubrene with Potassium: Competition between Intercalation and Molecular Decomposition.

We present the synthesis and characterization of the K+-intercalated rubrene (C42H28) phase, K2Rubrene (K2R), and identify the coexistence of amorphous and crystalline materials in samples where the crystalline component is phase-pure. We suggest this is characteristic of many intercalated alkali metal-polyaromatic hydrocarbon (PAH) systems, including those for which superconductivity has been claimed. The systematic investigation of K-rubrene solid-state reactions using both K and KH sources reveals a complex competition between K intercalation and the decomposition of rubrene, producing three K-intercalated compounds, namely, K2R, K(RR*), and K xR' (where R* and R' are rubrene decomposition derivatives C42H26 and C30H20, respectively). K2R is obtained as the major phase over a wide composition range and is accompanied by the formation of amorphous byproducts from the decomposition of rubrene. K(RR*) is synthesized as a single phase, and K xR' is obtained only as a secondary phase to the majority K2R phase. The crystal structure of K2R was determined using high-resolution powder X-ray diffraction, revealing that the structural rearrangement from pristine rubrene creates two large voids per rubrene within the molecular layers in which K+ is incorporated. K+ cations accommodated within the large voids interact strongly with the neighboring rubrene via η6, η3, and η2 binding modes to the tetracene cores and the phenyl groups. This contrasts with other intercalated PAHs, where only a single void per PAH is created and the intercalated K+ weakly interacts with the host. The decomposition products of rubrene are also examined using solution NMR, highlighting the role of the breaking of C-Cphenyl bonds. For the crystalline decomposition derivative products K(RR*) and K xR', a lack of definitive structural information with regard to R* and R' prevents the crystal structures from being determined. The study illustrates the complexity in accessing solvent-free alkali metal salts of reduced PAH of the type claimed to afford superconductivity.

Computational Prediction and Experimental Realization of p-Type Carriers in the Wide-Band-Gap Oxide SrZn1- xLi xO2.

It is challenging to achieve p-type doping of zinc oxides (ZnO), which are of interest as transparent conductors in optoelectronics. A ZnO-related ternary compound, SrZnO2, was investigated as a potential host for p-type conductivity. First-principles investigations were used to select from a range of candidate dopants the substitution of Li+ for Zn2+ as a stable, potentially p-type, doping mechanism in SrZnO2. Subsequently, single-phase bulk samples of a new p-type-doped oxide, SrZn1- xLi xO2 (0 < x < 0.06), were prepared. The structural, compositional, and physical properties of both the parent SrZnO2 and SrZn1- xLi xO2 were experimentally verified. The band gap of SrZnO2 was calculated using HSE06 at 3.80 eV and experimentally measured at 4.27 eV, which confirmed the optical transparency of the material. Powder X-ray diffraction and inductively coupled plasma analysis were combined to show that single-phase ceramic samples can be accessed in the compositional range x < 0.06. A positive Seebeck coefficient of 353(4) µV K-1 for SrZn1- xLi xO2, where x = 0.021, confirmed that the compound is a p-type conductor, which is consistent with the pO2 dependence of the electrical conductivity observed in all SrZn1- xLi xO2 samples. The conductivity of SrZn1- xLi xO2 is up to 15 times greater than that of undoped SrZnO2 (for x = 0.028 σ = 2.53 µS cm-1 at 600 °C and 1 atm of O2).

Bi2+2 nO2+2 nCu2-δSe2+ n-δXδ (X = Cl, Br): A Three-Anion Homologous Series.

Both layered multiple-anion compounds and homologous series are of interest for their electronic properties, including the ability to tune the properties by changing the nature or number of the layers. Here we expand, using both computational and experimental techniques, a recently reported three-anion material, Bi4O4Cu1.7Se2.7Cl0.3, to the homologous series Bi2+2 nO2+2 nCu2-δSe2+ n-δXδ (X = Cl, Br), composed of parent blocks that are well-studied thermoelectric materials. All of the materials show exceptionally low thermal conductivity (0.2 W/mK and lower) parallel to the axis of pressing of the pellets, as well as narrow band gaps (as low as 0.28 eV). Changing the number of layers affects the band gap, thermal conductivity, carrier type, and presence of a phase transition. Furthermore, the way in which the different numbers of layers are accessed, by tuning the compensating Cu vacancy concentration and halide substitution, represents a novel route to homologous series. This homologous series shows tunable properties, and the route explored here could be used to build new homologous series out of known structural blocks.

Bi4O4Cu1.7Se2.7Cl0.3: Intergrowth of BiOCuSe and Bi2O2Se Stabilized by the Addition of a Third Anion.

Layered two-anion compounds are of interest for their diverse electronic properties. The modular nature of their layered structures offers opportunities for the construction of complex stackings used to introduce or tune functionality, but the accessible layer combinations are limited by the crystal chemistries of the available anions. We present a layered three-anion material, Bi4O4Cu1.7Se2.7Cl0.3, which adopts a new structure type composed of alternately stacked BiOCuSe and Bi2O2Se-like units. This structure is accessed by inclusion of three chemically distinct anions, which are accommodated by aliovalently substituted Bi2O2Se0.7Cl0.3 blocks coupled to Cu-deficient Bi2O2Cu1.7Se2 blocks, producing a formal charge modulation along the stacking direction. The hypothetical parent phase Bi4O4Cu2Se3 is unstable with respect to its charge-neutral stoichiometric building blocks. The complex layer stacking confers excellent thermal properties upon Bi4O4Cu1.7Se2.7Cl0.3: a room-temperature thermal conductivity (κ) of 0.4(1) W/mK was measured on a pellet with preferred crystallite orientation along the stacking axis, with perpendicular measurement indicating it is also highly anisotropic. This κ value lies in the ultralow regime and is smaller than those of both BiOCuSe and Bi2O2Se. Bi4O4Cu1.7Se2.7Cl0.3 behaves like a charge-balanced semiconductor with a narrow band gap. The chemical diversity offered by the additional anion allows the integration of two common structural units in a single phase by the simultaneous and coupled creation of charge-balancing defects in each of the units.

The preparation of large surface area lanthanum based perovskite supports for AuPt nanoparticles: tuning the glycerol oxidation reaction pathway by switching the perovskite B site.

Gold and gold alloys, in the form of supported nanoparticles, have been shown over the last three decades to be highly effective oxidation catalysts. Mixed metal oxide perovskites, with their high structural tolerance, are ideal for investigating how changes in the chemical composition of supports affect the catalysts' properties, while retaining similar surface areas, morphologies and metal co-ordinations. However, a significant disadvantage of using perovskites as supports is their high crystallinity and small surface area. We report the use of a supercritical carbon dioxide anti-solvent precipitation methodology to prepare large surface area lanthanum based perovskites, making the deposition of 1 wt% AuPt nanoparticles feasible. These catalysts were used for the selective oxidation of glycerol. By changing the elemental composition of the perovskite B site, we dramatically altered the reaction pathway between a sequential oxidation route to glyceric or tartronic acid and a dehydration reaction pathway to lactic acid. Selectivity profiles were correlated to reported oxygen adsorption capacities of the perovskite supports and also to changes in the AuPt nanoparticle morphologies. Extended time on line analysis using the best oxidation catalyst (AuPt/LaMnO3) produced an exceptionally high tartronic acid yield. LaMnO3 produced from alternative preparation methods was found to have lower activities, but gave comparable selectivity profiles to that produced using the supercritical carbon dioxide anti-solvent precipitation methodology.

Interface control by chemical and dimensional matching in an oxide heterostructure.

Interfaces between different materials underpin both new scientific phenomena, such as the emergent behaviour at oxide interfaces, and key technologies, such as that of the transistor. Control of the interfaces between materials with the same crystal structures but different chemical compositions is possible in many materials classes, but less progress has been made for oxide materials with different crystal structures. We show that dynamical self-organization during growth can create a coherent interface between the perovskite and fluorite oxide structures, which are based on different structural motifs, if an appropriate choice of cations is made to enable this restructuring. The integration of calculation with experimental observation reveals that the interface differs from both the bulk components and identifies the chemical bonding requirements to connect distinct oxide structures.

Catalytic Response and Stability of Nickel/Alumina for the Hydrogenation of 5-Hydroxymethylfurfural in Water.

The catalytic response of Ni on Al2O3 obtained from Ni-Al layered double hydroxides was studied for the liquid-phase hydrogenation of hydroxymethyl furfural to tetrahydrofuran-2,5-diyldimethanol (THFDM) in water. The successive calcination and reduction of the precursors caused the removal of interlayer hydroxyl and carbonate groups and the reduction of Ni(2+) to Ni(0). Four reduced mixed oxide catalysts were obtained, consisting of different amount of Ni metal contents (47-68 wt%) on an Al-rich amorphous component. The catalytic activity was linked to Ni content whereas selectivity was mainly affected by reaction temperature. THFDM was formed in a stepwise manner at low temperature (353 K) whereas 3-hydroxymethyl cyclopentanone was generated at higher temperature. Coke formation caused deactivation; however, the catalytic activity can be regenerated using heat treatment. The results establish Ni on Al2O3 as a promising catalyst for the production of THFDM in water.