Platelet lysates-based hydrogels incorporating bioactive mesoporous silica nanoparticles for stem cell osteogenic differentiation.

Scaffolds for bone tissue regeneration should provide the right cues for stem cell adhesion and proliferation, but also lead to their osteogenic differentiation. Hydrogels of modified platelet lysates (PLMA) show the proper mechanical stability for cell encapsulation and contain essential bioactive molecules required for cell maintenance. We prepared a novel PLMA-based nanocomposite for bone repair and regeneration capable of releasing biofactors to induce osteogenic differentiation. Human bone marrow-derived mesenchymal stem cells (hBM-MSCs) were encapsulated in PLMA hydrogels containing bioactive mesoporous silica nanoparticles previously loaded with dexamethasone and functionalized with calcium and phosphate ions. After 21 d of culture, hBM-MSCs remained viable, presented a stretched morphology, and showed signs of osteogenic differentiation, namely the presence of significant amounts of alkaline phosphatase, bone morphogenic protein-2 and osteopontin, hydroxyapatite, and calcium nodules. Developed for the first time, PLMA/MSNCaPDex nanocomposites were able to guide the differentiation of hBM-MSCs without any other osteogenic supplementation.

Modeling of Cell-Mediated Self-Assembled Colloidal Scaffolds.

A critical step in tissue engineering is the design and synthesis of 3D biocompatible matrices (scaffolds) to support and guide the proliferation of cells and tissue growth. The most existing techniques rely on the processing of scaffolds under controlled conditions and then implanting them in vivo, with questions related to biocompatibility and implantation that are still challenging. As an alternative, it was proposed to assemble the scaffolds in loco through the self-organization of colloidal particles mediated by cells. To overcome the difficulty to test experimentally all the relevant parameters, we propose the use of large-scale numerical simulation as a tool to reach useful predictive information and to interpret experimental results. Thus, in this study, we combine experiments, particle-based simulations, and mean-field calculations to show that, in general, the size of the self-assembled scaffold scales with the cell-to-particle ratio. However, we have found an optimal value of this ratio, for which the size of the scaffold is maximal when the cell-cell adhesion is suppressed. These results suggest that the size and structure of the self-assembled scaffolds may be designed by tuning the adhesion between cells in the colloidal suspension.

Role of active nanoliposomes in the surface and bulk mechanical properties of hybrid hydrogels.

Nanoliposomes are widely used as delivery vehicles for active compounds. Nanoliposomes from rapeseed phospholipids were incorporated into interpenetrating polymer network hydrogels of gelatin methacryloyl and alginate. The multiscale physicochemical properties of the hydrogels are studied both on the surface and through the thickness of the 3D network. The obtained composite hydrogels exhibited strong mechanical properties and a highly porous surface. The blend ratio, as well as the concentration of nanoliposomes, affects the properties of the hydrogels. Nanofunctionalized hydrogels induced keratinocyte â€‹growth. These advantageous characteristics may open up many applications of the developed hydrogels in drug delivery and tissue engineering.

Multifunctional laminarin microparticles for cell adhesion and expansion.

Microfabrication technologies have been widely explored to produce microgels that can be assembled in functional constructs for tissue engineering and regenerative medicine applications. Here, we propose microfluidics coupled to a source of UV light to produce multifunctional methacrylated laminarin microparticles with narrow distribution of sizes using photopolymerization. The multifunctional microparticles were loaded with platelet lysates and further conjugated with an adhesive peptide. The adhesive peptides dictated cell adhesiveness to the laminarin microparticles, the incorporation of platelet lysates have resulted in improved cell expansion compared to clear microparticles. Overall, our findings demonstrate that multifunctional methacrylated laminarin microparticles provide an effective support for cell attachment and expansion. Moreover, expanded cells provide the link for microparticles aggregation resulting in robust 3D structures. This suggest the potential for using the methacrylated laminarin microplatforms capable to be assembled by the action of cells to rapidly produce large tissue engineered constructs.

Bioinstructive microparticles for self-assembly of mesenchymal stem Cell-3D tumor spheroids.

3D multicellular tumor spheroids (3D-MCTS) that closely mimic in vitro the complex lung tumor microenvironment (TME) are highly desirable for screening innovative anti-cancer therapeutics. Despite significant improvements in mimicking lung TME, few models have combined tumor-infiltrating mesenchymal stem cells from bone marrow (hBM-MSCs) with heterotypic 3D tumor spheroid models containing ECM mimetic components. Herein, we engineered hybrid 3D-MCTS that combine, for the first time, A549:fibroblasts:hBM-MSCs in heterotypic tri-culture, with bioinstructive hyaluronan microparticles that act as tumor-ECM mimetics and as cell-anchoring hotspots. The obtained results indicated that 3D microspheres provided proper support for cells to self-assemble into compact 3D microtissues and promoted an increase in CD44 expression, emulating the presence of native-ECM hyaluronan. 3D-MCTS size and sphere-like morphology was reproducible and tri-culture models presented the characteristic solid tumors necrotic core. Mesenchymal stem cells tracking demonstrated that hBM-MSCs migrate to different regions in 3D microtumors mass exhibiting dynamic interactions with cancer cells and stromal fibroblasts, alike in human tumors. Importantly, doxorubicin administration revealed hBM-MSCs effect on cytotoxic responses in 3D tri-culture models and in dual cultures of hBM-MSCs:A549 at 10:1 ratio. Such findings evidence the relevance of including hBM-MSCs in combination with cancer-stromal fibroblasts in 3D in vitro tumor models and the importance to test different cell-to-cell ratios to mimic tumor heterogeneity. In addition, bioinstructive hyaluronan-microparticles were also effective as cell-agglomerating scaffolds and showed potential to be used as an enabling technology for including different ECM components in 3D in vitro models in the future.

Design of spherically structured 3D in vitro tumor models -Advances and prospects.

Three-dimensional multicellular tumor models are receiving an ever-growing focus as preclinical drug-screening platforms due to their potential to recapitulate major physiological features of human tumors in vitro. In line with this momentum, the technologies for assembly of 3D microtumors are rapidly evolving towards a comprehensive inclusion of tumor microenvironment elements. Customized spherically structured platforms, including microparticles and microcapsules, provide a robust and scalable technology to imprint unique biomolecular tumor microenvironment hallmarks into 3D in vitro models. Herein, a comprehensive overview of novel advances on the integration of tumor-ECM components and biomechanical cues into 3D in vitro models assembled in spherical shaped platforms is provided. Future improvements regarding spatiotemporal/mechanical adaptability, and degradability, during microtumors in vitro 3D culture are also critically discussed considering the realistic potential of these platforms to mimic the dynamic tumor microenvironment. From a global perspective, the production of 3D multicellular spheroids with tumor ECM components included in spherical models will unlock their potential to be used in high-throughput screening of therapeutic compounds. It is envisioned, in a near future, that a combination of spherically structured 3D microtumor models with other advanced microfluidic technologies will properly recapitulate the flow dynamics of human tumors in vitro. STATEMENT OF SIGNIFICANCE: The ability to correctly mimic the complexity of the tumor microenvironment in vitro is a key aspect for the development of evermore realistic in vitro models for drug-screening and fundamental cancer biology studies. In this regard, conventional spheroid-based 3D tumor models, combined with spherically structured biomaterials, opens the opportunity to precisely recapitulate complex cell-extracellular matrix interactions and tumor compartmentalization. This review provides an in-depth focus on current developments regarding spherically structured scaffolds engineered into in vitro 3D tumor models, and discusses future advances toward all-encompassing platforms that may provide an improved in vitro/in vivo correlation in a foreseeable future.

Extracellular vesicles, exosomes and shedding vesicles in regenerative medicine - a new paradigm for tissue repair.

Tissue regeneration by stem cells is driven by the paracrine activity of shedding vesicles and exosomes, which deliver specific cargoes to the recipient cells. Proteins, RNA, cytokines and subsequent gene expression, orchestrate the regeneration process by improving the microenvironment to promote cell survival, controlling inflammation, repairing injury and enhancing the healing process. The action of microRNA is widely accepted as an essential driver of the regenerative process through its impact on multiple downstream biological pathways, and its ability to regulate the host immune response. Here, we present an overview of the recent potential uses of exosomes for regenerative medicine and tissue engineering. We also highlight the differences in composition between shedding vesicles and exosomes that depend on the various types of stem cells from which they are derived. The conditions that affect the production of exosomes in different cell types are deliberated. This review also presents the current status of candidate exosomal microRNAs for potential therapeutic use in regenerative medicine, and in applications involving widely studied organs and tissues such as heart, lung, cartilage and bone.

Development of a bioactive glass-polymer composite for wound healing applications.

This study reports the production and characterization of a composite material for wound healing applications. A bioactive glass obtained by sol-gel process and doped with two different metal ions was investigated. Silver (Ag) and cobalt (Co) were chosen due to their antibacterial and angiogenic properties, respectively, very beneficial in the wound healing process. Poly(ε-caprolactone) (PCL) fibers were produced by electrospinning (ES) from a polymeric solution using acetone as a solvent. After optimization of the ES parameters, two main suspensions were prepared, namely: PCL containing bioactive glass nanoparticles (BG-NP) and PCL with Ag2O and CoO doped BG-NP (DP BG-NP), which were processed with different concentrations of BG-NP (0.25%, 0.5% and 0.75wt%). The composite membranes were characterized in terms of morphology, fiber diameter, weight loss, mineralization potential and mechanical performance.

Biomedical applications of natural-based polymers combined with bioactive glass nanoparticles.

In recent years, the combination of natural polymers with nanoparticles has permitted the development of sophisticated and efficient bioinspired constructs. In this regard, the incorporation of bioactive glass nanoparticles (BGNPs) confers a bioactive nature to these constructs, which can then induce the formation of a bone-like apatite layer upon immersion in a physiological environment. Moreover, the incorporation of bioactive glass nanoparticles has been found to be beneficial; the constructs proved to be biocompatible, promote cell adhesion and spreading, and regulate osteogenic commitment. This review provides a summary and discussion of the composition, design, and applications of bioinspired nanocomposite constructs based on BGNPs. Examples of nanocomposite systems will be highlighted with relevance to biomedical applications. It is expected that understanding the principles and the state-of-the-art of natural nanocomposites may lead to breakthroughs in many research areas, including tissue engineering and orthopaedic devices. The challenges regarding the future translation of these nanostructured composites into clinical use are also summarized.

Elastic chitosan/chondroitin sulfate multilayer membranes.

Freestanding multilayered films were obtained using layer-by-layer (LbL) technology from the assembly of natural polyelectrolytes, namely chitosan (CHT) and chondroitin sulfate (CS). The morphology and the transparency of the membranes were evaluated. The influence of genipin (1 and 2 mg ml(-1)), a naturally-derived crosslinker agent, was also investigated in the control of the mechanical properties of the CHT/CS membranes. The water uptake ability can be tailored by changing the crosslinker concentration that also controls the Young's modulus and ultimate tensile strength. The maximum extension tends to decrease upon crosslinking with the highest genipin concentration, compromising the elastic properties of CHT/CS membranes: nevertheless, when using a lower genipin concentration, the ultimate tensile stress is similar to the non-crosslinked one, but exhibits a significantly higher modulus. Moreover, the crosslinked multilayer membranes exhibited shape memory properties, through a simple hydration action. The in vitro biological assays showed better L929 cell adhesion and proliferation when using the crosslinked membranes and confirmed the non-cytotoxicity of the developed CHT/CS membranes. Within this research work, we were able to construct freestanding biomimetic multilayer structures with tailored swelling, mechanical and biological properties that could find applicability in a variety of biomedical applications.

Antibacterial bioadhesive layer-by-layer coatings for orthopedic applications.

In this study, thin LbL films were produced by combining the adhesive properties of the hyaluronic acid-dopamine conjugate with the bioactivity and bactericidal properties of silver doped bioactive glass nanoparticles. The build-up of these films was investigated by quartz crystal microbalance with dissipation monitoring. LbL coatings were then constructed on a glass substrate for further characterization. We found that these antimicrobial bioinspired films display enhanced adhesive strength. In vitro bioactivity tests were performed by immersing them in simulated body fluid solution for 14 days where the constructed films promoted the formation of a bone-like apatite layer. From microbiological assays, it was found that coatings containing silver doped nanoparticles exhibited a remarkable antibacterial effect against Staphylococcus aureus and Escherichia coli cultures. Finally, in vitro cellular behavior tests showed enhanced cell adhesion, proliferation and viability for these antibacterial bioadhesive films. Therefore, the constructed thin films showed promising properties and evidenced great potential to be used as coatings for orthopedic implants.

High performance free-standing films by layer-by-layer assembly of graphene flakes and ribbons with natural polymers.

In this work, novel free-standing (FS) films based on chitosan, alginate and graphene oxide (GO) were developed through layer-by-layer assembly. First, GO was synthesized from graphite and multi-walled carbon nanotubes using a modified Hummer's method, yielding oxidized graphene flakes (o-GFs) and oxidized graphene nanoribbons (o-GNRs), respectively, which were then characterized. Then FS films were produced and their morphological, thermal and mechanical properties, as well as the o-GF and o-GNR dispersion along the films were assessed. Their degradation and swelling profiles as well as their biological behavior were evaluated. Graphite and nanotubes were successfully oxidized and exfoliated forming stable suspensions that could be combined with chitosan (CHI) and alginate (ALG) solutions by layer-by-layer processing. The addition of o-GFs and o-GNRs resulted in rougher, hydrophilic FS films with significantly improved mechanical properties relative to CHI/ALG films. The presence of o-GFs or o-GNRs did not affect the thermal stability and the addition of o-GFs resulted in films with enhanced cytocompatibility. The results demonstrate the high potential of the GO reinforced films for biomedical applications, in particular o-GF films, for wound healing, and cardiac and bone engineering applications.

A novel hanging spherical drop system for the generation of cellular spheroids and high throughput combinatorial drug screening.

We propose a novel hanging spherical drop system for anchoring arrays of droplets of cell suspension based on the use of biomimetic superhydrophobic flat substrates, with controlled positional adhesion and minimum contact with a solid substrate. By facing down the platform, it was possible to generate independent spheroid bodies in a high throughput manner, in order to mimic in vivo tumour models on the lab-on-chip scale. To validate this system for drug screening purposes, the toxicity of the anti-cancer drug doxorubicin in cell spheroids was tested and compared to cells in 2D culture. The advantages presented by this platform, such as feasibility of the system and the ability to control the size uniformity of the spheroid, emphasize its potential to be used as a new low cost toolbox for high-throughput drug screening and in cell or tissue engineering.

Incorporation of antimicrobial peptides on functionalized cotton gauzes for medical applications.

A large group of low molecular weight natural compounds that exhibit antimicrobial activity has been isolated from animals and plants during the past two decades. Among them, peptides are the most widespread resulting in a new generation of antimicrobial agents with higher specific activity. In the present study we have developed a new strategy to obtain antimicrobial wound-dressings based on the incorporation of antimicrobial peptides into polyelectrolyte multilayer films built by the alternate deposition of polycation (chitosan) and polyanion (alginic acid sodium salt) over cotton gauzes. Energy dispersive X ray microanalysis technique was used to determine if antimicrobial peptides penetrated within the films. FTIR analysis was performed to assess the chemical linkages, and antimicrobial assays were performed with two strains: Staphylococcus aureus (Gram-positive bacterium) and Klebsiella pneumonia (Gram-negative bacterium). Results showed that all antimicrobial peptides used in this work have provided a higher antimicrobial effect (in the range of 4 log-6 log reduction) for both microorganisms, in comparison with the controls, and are non-cytotoxic to normal human dermal fibroblasts at the concentrations tested.

Cell selective chitosan microparticles as injectable cell carriers for tissue regeneration.

The detection, isolation and sorting of cells holds an important role in cell therapy and regenerative medicine. Also, injectable systems have been explored for tissue regeneration in vivo, because it allows repairing complex shaped tissue defects through minimally invasive surgical procedures. Here we report the development of chitosan microparticles with a size of 115.8 µm able to capture and expand a specific cell type that can also be regarded as an injectable biomaterial. Monoclonal antibodies against cell surface antigens specific to endothelial cells and stem cells were immobilized on the surface of the microparticles. Experimental results showed that particles bioconjugated with specific antibodies provide suitable surfaces to capture a target cell type and subsequent expansion of the captured cells. Primarily designed for an application in tissue engineering, three main challenges are accomplished with the herein presented microparticles: separation, scale-up expansion of specific cell type and successful use as an injectable system to form small tissue constructs in situ.

Bio-inspired Aloe vera sponges for biomedical applications.

Chemical composition and biological properties of Aloe vera (AV), a tropical plant, explain its potential use for cosmetic, nutritional and biomedical applications. AV gel present in AV leaves is rich in several compounds, nutrients and polysaccharides. This work proposes using AV gel complex structure and chemical composition, associated with freeze-drying, to produce sponges. To increase the structures stability in aqueous media, a thin coating of gellan gum (GG), was applied onto AV gel. AV-based sponges showed a heterogeneous porous formation, interconnected pores and good porosity (72-77%). The coating with a GG layer onto AV influenced the stability, swelling behavior and mechanical properties of the resulting sponges. Moreover, sponges provided the sustained release of BSA-FTIC, used as a model protein, over 3 weeks. Also, in vitro cell culture studies evidenced that sponges are not cytotoxic for a mouse fibroblast-like cell line. Therefore, developed AV-based sponges have potential use in biomedical applications.

Biomechanical and cellular segmental characterization of human meniscus: building the basis for Tissue Engineering therapies.

OBJECTIVE: To overcome current limitations of Tissue Engineering (TE) strategies, deeper comprehension on meniscus biology is required. This study aims to combine biomechanical segmental analysis of fresh human meniscus tissues and its correlation with architectural and cellular characterization. METHOD: Morphologically intact menisci, from 44 live donors were studied after division into three radial segments. Dynamic mechanical analysis (DMA) was performed at physiological-like conditions. Micro-computed tomography (CT) analysis of freeze-dried samples assessed micro-structure. Flow cytometry, histology and histomorphometry were used for cellular study and quantification. RESULTS: Anterior segments present significantly higher damping properties. Mid body fresh medial meniscus presents higher values of E' compared to lateral. Cyclic loads influence the viscoelastic behavior of menisci. By increasing the frequency leads to an increase in stiffness. Conversely, with increasing frequencies, the capacity to dissipate energy and damping properties initially decrease and then rise again. Age and gender directly correlate with higher E' and tan δ. Micro-CT analysis revealed that mean porosity was 55.5 (21.2-89.8)% and 64.7 (47.7-81.8)% for freeze-dried lateral and medial meniscus, respectively. Predominant cells are positive for CD44, CD73, CD90 and CD105, and lack CD31, CD34 and CD45 (present in smaller populations). Histomorphometry revealed that cellularity decreases from vascular zone 1 to zone 3. Anterior segments of lateral and medial meniscus have inferior cellularity as compared to mid body and posterior ones. CONCLUSION: Menisci are not uniform structures. Anterior segments have lower cellularity and higher damping. Cyclic loads influence viscoelastic characteristics. Future TE therapies should consider segmental architecture, cellularity and biomechanics of fresh tissue.

Photopatterned antibodies for selective cell attachment.

We present a phototriggerable system that allows for the spatiotemporal controlled attachment of selected cell types to a biomaterial using immobilized antibodies that specifically target individual cell phenotypes. o-Nitrobenzyl caged biotin was used to functionalize chitosan membranes and mediate site-specific coupling of streptavidin and biotinylated antibodies after light activation. The ability of this system to capture and immobilize specific cells on a surface was tested using endothelial-specific biotinylated antibodies and nonspecific ones as controls. Homogeneous patterned monolayers of human umbilical vein endothelial cells were obtained on CD31-functionalized surfaces. This is a simple and generic approach that is applicable to other ligands, materials, and cell types and shows the flexibility of caged ligands to trigger and control the interaction between cells and biomaterials.

Bioinspired superamphiphobic surfaces as a tool for polymer- and solvent-independent preparation of drug-loaded spherical particles.

Superamphiphobic surfaces were evaluated as a tool to prepare spherical particles from polymers and solvents of very diverse nature, under mild conditions and with 100% drug encapsulation yield. Different from bioinspired superhydrophobic surfaces suitable only for aqueous dispersions, the superamphiphobic platforms allowed the formation of spherical droplets when solvents of any polarity were deposited onto them. Spherical poly(d,l-lactide-co-glycolide) (PLGA) particles were synthesized by placing drops of PLGA/ciprofloxacin suspensions in dioxane on a superamphiphobic surface followed by solvent evaporation. The particles prepared covering a wide range of PLGA/ciprofloxacin weight ratios delivered a 20% dose in the first 24h and then sustained the release of the remaining drug for more than 1month. The particles, both freshly prepared and after being 26days in the release medium, showed efficiency against different types of microorganisms. The developed polymer- and solvent-independent approach could be useful for microencapsulation with very high efficiency of active substances of varied nature into size-tunable particles for a wide range of applications in an affordable and cost-effective manner.

Confinement effects on the dynamic behavior of poly(D,L-lactic acid) upon incorporation in α-cyclodextrin.

Inclusion complexes (ICs) composed of α-cyclodextrin (α-CD) and poly(D,L-lactic acid) (PDLLA), with 10/24 (IC1) and 15/46 (IC2) (% w/w) of PDLLA incorporated/initial PDLLA weight percentage, were prepared and characterized mainly by dielectric relaxation spectroscopy (DRS). Bulk PDLLA was also analyzed for comparison. DRS was revealed to be a suitable tool to distinguish the dynamical response of the PDLLA regions constrained in between α-CD channels from the fraction incorporated inside channels. While the cooperative α-process undergoes a dramatic depletion shifting to higher temperatures (∼4.5 °C) for the PDLLA interchannels portion, it is suppressed for PDLLA chains inside pores. It was demonstrated that the broad secondary relaxation of bulk PDLLA is the Johari-Goldstein process (ßJG-process). The detection of its analogue in the ICs at higher frequencies, to a greater extent in IC1, is interpreted as a true confinement effect where the dimensions of the α-CD channels interfere with the length scale of the ßJG-process. The limit predicted in the framework of the coupling model, where the α-relaxation transforms in the ßJG-process, seems to be reached in the ICs. Furthermore, it was found that the length scale of the additional γ process only detected in the ICs is inferior to inter- or intrachannel dimensions.