Molecular Dynamics of Ionic Liquids from Fast-Field Cycling NMR and Molecular Dynamics Simulations.

Understanding the connection between the molecular structure of ionic liquids and their properties is of paramount importance for practical applications. However, this connection can only be established if a broad range of physicochemical properties on different length and time scales is already available. Even then, the interpretation of the results often remains ambiguous due to the natural limits of experimental approaches. Here we use fast-field cycling (FFC) to access both translational and rotational dynamics of ionic liquids. These combined with a comprehensive physicochemical characterization and MD simulations provide a toolkit to give insight into the mechanisms of molecular mechanics. The FFC results are consistent with the computer simulation and conventional physicochemical approaches. We show that curling of the side chains around the positively charged cationic core is essential for the properties of ether-functionalized ionic liquids, and we demonstrate that neither geometry nor polarity alone are sufficient to explain the macroscopic properties.

In Situ Characterization of Mixtures of Linear and Branched Hydrocarbons Confined within Porous Media Using 2D DQF-COSY NMR Spectroscopy.

The analysis of 1D anti-diagonal spectra from the projections of 2D double-quantum filtered correlation spectroscopy NMR spectra is presented for the determination of the compositions of liquid mixtures of linear and branched alkanes confined within porous media. These projected spectra do not include the effects of line broadening and therefore retain high-resolution information even in the presence of inhomogeneous magnetic fields as are commonly found in porous media. A partial least-square regression analysis is used to characterize the mixture compositions. Two case studies are considered. First, mixtures of 2-methyl alkanes and n-alkanes are investigated. It is shown that estimation of the mol % of branched species present was achieved with a root-mean-square error of prediction (RMSEP) of 1.4 mol %. Second, the quantification of multicomponent mixtures consisting of linear alkanes and 2-, 3-, and 4-monomethyl alkanes was considered. Discrimination of 2-methyl and linear alkanes from other branched isomers in the mixture was achieved, although discrimination between 3- and 4- monomethyl alkanes was not possible. Compositions of the linear alkane, 2-methyl alkane, and the total composition of 3- and 4-methyl alkanes were estimated with a RMSEP <3 mol %. The approach was then used to estimate the composition of the mixtures in terms of submolecular groups of CH3CH2, (CH3)2CH, and CH2CH(CH3)CH2 present in the mixtures; a RMSEP <1 mol % was achieved for all groups. The ability to characterize the mixture compositions in terms of molecular subgroups allows the application of the method to characterize mixtures containing multimethyl alkanes. The motivation for this work is to develop a method for determining the mixture composition inside the catalyst pores during Fischer-Tropsch synthesis. However, the method reported is generic and can be applied to any system in which there is a need to characterize mixture compositions of linear and branched alkanes.

Experimental Determination of H2 and CO Diffusion Coefficients in a Wax Mixture Confined in a Porous Titania Catalyst Support.

The ability to measure and predict molecular diffusion coefficients in multicomponent mixtures is not only of fundamental scientific interest but also of significant relevance in understanding how catalytic processes proceed. In the present work, the direct measurement of the molecular diffusion of H2 and CO gas-phase species diffusing in n-alkane mixtures using pulsed-field gradient (PFG) nuclear magnetic resonance (NMR) methods is reported. The work is of direct relevance to Fischer-Tropsch (FT) catalysis, with the measurements being made of the gas-wax system with the wax in both the bulk liquid state and when confined within a titania catalyst support, at temperatures and pressures typical of low-temperature FT synthesis. Molecular diffusion coefficients of H2 and CO within wax-saturated porous titania in the range (1.00-2.43) × 10-8 and (6.44-8.50) × 10-9 m2 s-1, respectively, were measured in the temperature range of 140-240 and 200-240 °C for H2 and CO, respectively, at a pressure of 40 bar. The wax mixture was typical of a wax produced during FT catalysis and had a molar average carbon number of 36. It is shown that the hydrogen diffusion coefficient within this wax mixture is consistent, to within experimental error, with the hydrogen diffusion coefficient measured in pure single-component n-hexatriacontane (n-C36) wax; this result held with the waxes in the bulk liquid state and when confined within the porous titania. The tortuosity of the porous titania was also measured using PFG NMR and found to be 1.77; this value is independent of temperature. The ability of existing correlations to predict these experimentally determined data was then critically evaluated. Although the Wilke-Chang correlation was found to underestimate the molecular diffusion coefficients of both H2 and CO diffusing in the wax in both the bulk state and when confined within the porous titania, parameterized correlations based on the rough hard sphere model, having accounted for the experimentally determined tortuosity factor, predicted the H2 and CO diffusion within bulk and confined wax to within 3%.

NMR and Thermal Studies for the Characterization of Mass Transport and Phase Separation in Paracetamol/Copovidone Hot-Melt Extrusion Formulations.

The formulation of drug/polymer amorphous solid dispersions (ASDs) is one of the most successful strategies for improving the oral bioavailability of poorly soluble active pharmaceutical ingredients (APIs). Hot-melt extrusion (HME) is one method for preparing ASDs that is growing in importance in the pharmaceutical industry, but there are still substantial gaps in our understanding regarding the dynamics of drug dissolution and dispersion in viscous polymers and the physical stability of the final formulations. Furthermore, computational models have been built to predict optimal processing conditions, but they are limited by the lack of experimental data for key mass transport parameters, such as the diffusion coefficient. The work presented here reports direct measurements of API diffusion in pharmaceutical polymer melts, using high-temperature pulsed-field gradient NMR. The diffusion coefficient of a model drug/polymer system (paracetamol/copovidone) was determined for different drug loadings and at temperatures relevant to the HME process. The mechanisms of the diffusion process are also explored with the Stokes-Einstein and Arrhenius models. The results show that diffusivity is linked exponentially to temperature. Furthermore, this study includes rheological characterization, differential scanning calorimetry (DSC), and 1H ssNMR T1 and T1ρ measurements to give additional insights into the physical state, phase separation, and API/polymer interactions in paracetamol/copovidone ASD formulations.

In Situ Determination of Carbon Number Distributions of Mixtures of Linear Hydrocarbons Confined within Porous Media Using Pulsed Field Gradient NMR.

Pulsed field gradient (PFG) NMR measurements, combined with a novel optimization method, are used to determine the composition of hydrocarbon mixtures of linear alkanes (C7-C16) in both the bulk liquid state and when imbibed within a porous medium of mean pore diameter 28.6 nm. The method predicts the average carbon number of a given mixture to an accuracy of ±1 carbon number and the mole fraction of a mixture component to within an average root-mean-square error of ±0.036 with just three calibration mixtures. Given that the method can be applied at any conditions of temperature and pressure at which the PFG NMR measurements are made, the method has the potential for application in characterizing hydrocarbon liquid mixtures inside porous media and at the operating conditions relevant to, for example, hydrocarbon recovery and heterogeneous catalysis.

Application of Magnetic Resonance to Assess Lyophilized Drug Product Reconstitution.

PURPOSE: Dynamic in-situ proton (1H) magnetic resonance imaging (MRI) and 1H T2-relaxometry experiments are described in an attempt to: (i) understand the physical processes, that occur during the reconstitution of lyophilized bovine serum albumin (BSA) and monoclonal antibody (mAb) proteins; and (ii) objectify the reconstitution time. METHODS: Rapid two-dimensional 1H MRI and diffusion weighted MRI were used to study the temporal changes in solids dissolution and characterise water mass transport characteristics. One-shot T2 relaxation time measurements were also acquired in an attempt to quantify the reconstitution time. Both MRI data and T2-relaxation data were compared to standard visual observations currently adopted by industry. The 1H images were further referenced to MRI calibration data to give quantitative values of protein concentration and, percentage of remaining undissolved solids. RESULTS: An algorithmic analysis of the 1H T2-relaxation data shows it is possible to classify the reconstitution event into three regimes (undissolved, transitional and dissolved). Moreover, a combined analysis of the 2D 1H MRI and 1H T2-relaxation data gives a unique time point that characterises the onset of a reconstituted protein solution within well-defined error bars. These values compared favourably with those from visual observations. Diffusion weighted MRI showed that low concentration BSA and mAb samples showed distinct liquid-liquid phase separation attributed to two liquid layers with significant density differences. CONCLUSIONS: T2 relaxation time distributions (whose interpretation is validated from the 2D 1H MR images) provides a quick and effective framework to build objective, quantitative descriptors of the reconstitution process that facilitate the interpretation of subjective visual observations currently adopted as the standard practice industry.

Diffusion, Ion Pairing and Aggregation in 1-Ethyl-3-Methylimidazolium-Based Ionic Liquids Studied by 1 H and 19 F PFG NMR: Effect of Temperature, Anion and Glucose Dissolution.

In this work, using 1 H and 19 F PFG NMR, we probe the effect of temperature, ion size/type and glucose dissolution on the rate of transport in 1-ethyl-3-methylimidazolium ([EMIM]+ )-based ionic liquids by measuring self-diffusion coefficients. Using such data, we are able to establish the degree of ion pairing and quantify the extent of ionic aggregation during diffusion. For the neat 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]) a strong degree of ion pairing is observed. The substitution of the [OAc]- anion with the bis{(trifluoromethyl)sulfonyl}imide ([TFSI]- ) anion reduces the pairing between the ions, which is attributed to a lower electric charge density on the [TFSI]- anion, hence a weaker electric interaction with the [EMIM]+ cation. The effect of glucose, important for applications of ionic liquids as extracting media, on the strongly paired [EMIM][OAc] sample was also investigated and it is observed that the carbohydrate decreases the degree of ion pairing, which is attributed to the ability of glucose to disrupt inter-ionic interactions by forming hydrogen bonding, particularly with the [OAc]- anion. Calculations of aggregation number from diffusion data show that the [OAc]- anion diffuses as a part of larger aggregates compared to the [EMIM]+ cation. The results and analysis presented here show the usefulness of PFG NMR in studies of ionic liquids, giving new insights into ion pairing and aggregation and the factors affecting these parameters.

Modelling and upscaling of transport in carbonates during dissolution: Validation and calibration with NMR experiments.

We present an experimental and numerical study of transport in carbonates during dissolution and its upscaling from the pore (∼µm) to core (∼cm) scale. For the experimental part, we use nuclear magnetic resonance (NMR) to probe molecular displacements (propagators) of an aqueous hydrochloric acid (HCl) solution through a Ketton limestone core. A series of propagator profiles are obtained at a large number of spatial points along the core at multiple time-steps during dissolution. For the numerical part, first, the transport model-a particle-tracking method based on Continuous Time Random Walks (CTRW) by Rhodes et al. (2008)-is validated at the pore scale by matching to the NMR-measured propagators in a beadpack, Bentheimer sandstone, and Portland carbonate (Scheven et al., 2005). It was found that the emerging distribution of particle transit times in these samples can be approximated satisfactorily using the power law function ψ(t) ∼ t-1-ß, where 0 <ß < 2. Next, the evolution of the propagators during reaction is modelled: at the pore scale, the experimental data is used to calibrate the CTRW parameters; then the shape of the propagators is predicted at later observation times. Finally, a numerical upscaling technique is employed to obtain CTRW parameters for the core. From the NMR-measured propagators, an increasing frequency of displacements in stagnant regions was apparent as the reaction progressed. The present model predicts that non-Fickian behaviour exhibited at the pore scale persists on the centimetre scale.

Correction: Molecular and ionic diffusion in aqueous - deep eutectic solvent mixtures: probing inter-molecular interactions using PFG NMR.

Correction for 'Molecular and ionic diffusion in aqueous - deep eutectic solvent mixtures: probing inter-molecular interactions using PFG NMR' by Carmine D'Agostino et al., Phys. Chem. Chem. Phys., 2015, 17, 15297-15304.

Structure and dynamics of aqueous 2-propanol: a THz-TDS, NMR and neutron diffraction study.

Aqueous liquid mixtures, in particular, those involving amphiphilic species, play an important role in many physical, chemical and biological processes. Of particular interest are alcohol/water mixtures; however, the structural dynamics of such systems are still not fully understood. Herein, a combination of terahertz time-domain spectroscopy (THz-TDS) and NMR relaxation time analysis has been applied to investigate 2-propanol/water mixtures across the entire composition range; while neutron diffraction studies have been carried out at two specific concentrations. Excellent agreement is seen between the techniques with a maximum in both the relative absorption coefficient and the activation energy to molecular motion occurring at ∼90 mol% H2O. Furthermore, this is the same value at which well-established excess thermodynamic functions exhibit a maximum/minimum. Additionally, both neutron diffraction and THz-TDS have been used to provide estimates of the size of the hydration shell around 2-propanol in solution. Both methods determine that between 4 and 5 H2O molecules per 2-propanol are found in the 2-propanol/water clusters at 90 mol% H2O. Based on the acquired data, a description of the structure of 2-propanol/water across the composition range is presented.

Molecular and ionic diffusion in aqueous - deep eutectic solvent mixtures: probing inter-molecular interactions using PFG NMR.

Pulsed field gradient (PFG) NMR has been used to probe self-diffusion of molecular and ionic species in aqueous mixtures of choline chloride (ChCl) based deep eutectic solvents (DESs), in order to elucidate the effect of water on motion and inter-molecular interactions between the different species in the mixtures, namely the Ch(+) cation and hydrogen bond donor (HBD). The results reveal an interesting and complex behaviour of such mixtures at a molecular level. In general, it is observed that the hydroxyl protons ((1)H) of Ch(+) and the hydrogen bond donor have diffusion coefficients significantly different from those measured for their parent molecules when water is added. This indicates a clear and significant change in inter-molecular interactions. In aqueous Ethaline, the hydroxyl species of Ch(+) and HBD show a stronger interaction with water as water is added to the system. In the case of Glyceline, water has little effect on both hydroxyl proton diffusion of Ch(+) and HBD. In Reline, it is likely that water allows the formation of small amounts of ammonium hydroxide. The most surprising observation is from the self-diffusion of water, which is considerably higher that expected from a homogeneous liquid. This leads to the conclusion that Reline and Glyceline form mixtures that are inhomogeneous at a microscopic level despite the hydrophilicity of the salt and HBD. This work shows that PFG NMR is a powerful tool to elucidate both molecular dynamics and inter-molecular interactions in complex liquid mixtures, such as the aqueous DES mixtures.

The effect of grafting zirconia and ceria onto alumina as a support for silicotungstic acid for the catalytic dehydration of glycerol to acrolein.

The effect of ceria and zirconia grafting onto alumina (α and θ-δ phases) as supports for silicotungstic acid for the dehydration of glycerol to acrolein was studied. 30 % Silicotungstic acid (STA) supported on 5 % zirconia/δ,θ-alumina was the best catalyst, producing 85 % selectivity to acrolein at 100 % glycerol conversion, and it showed stable activity without using oxygen as a co-feed. The catalyst produced a STA of 90 g(acrolein) kg(cat)(-1) h(-1), which was greater than the STA simply supported on δ,θ-alumina, which only demonstrated 75 % selectivity towards acrolein. The effect of grafting on the support material was investigated by means of nitrogen adsorption, ammonia temperature-programmed desorption, thermogravimetric analysis, Raman spectroscopy, and powder X-ray diffraction. A pulsed-field gradient (PFG) NMR technique was also used to study diffusion processes associated with the catalysts. Diffusion studies of the grafted catalysts showed that zirconia contributes to the formation of more tortuous pathways within the pore structure, leading to the diminution of acid strength and making the catalyst less susceptible to coke formation.

Operando magnetic resonance: monitoring the evolution of conversion and product distribution during the heterogeneous catalytic ethene oligomerisation reaction.

Operando magnetic resonance (MR) spectroscopy has been used to follow an ethene oligomerisation reaction performed at 110 °C, 28 barg over a 1 wt% Ni/SiO2-Al2O3 catalyst. Spectra acquired over the timecourse of the reaction allow the calculation of conversion and product distribution as a function of time-on-stream.

Solvent effect and reactivity trend in the aerobic oxidation of 1,3-propanediols over gold supported on titania: NMR diffusion and relaxation studies.

In recent work, it was reported that changes in solvent composition, precisely the addition of water, significantly inhibits the catalytic activity of Au/TiO2 catalyst in the aerobic oxidation of 1,4-butanediol in methanol due to changes in diffusion and adsorption properties of the reactant. In order to understand whether the inhibition mechanism of water on diol oxidation in methanol is generally valid, the solvent effect on the aerobic catalytic oxidation of 1,3-propanediol and its two methyl-substituted homologues, 2-methyl-1,3-propanediol and 2,2-dimethyl-1,3-propanediol, over a Au/TiO2 catalyst has been studied here using conventional catalytic reaction monitoring in combination with pulsed-field gradient nuclear magnetic resonance (PFG-NMR) diffusion and NMR relaxation time measurements. Diol conversion is significantly lower when water is present in the initial diol/methanol mixture. A reactivity trend within the group of diols was also observed. Combined NMR diffusion and relaxation time measurements suggest that molecular diffusion and, in particular, the relative strength of diol adsorption, are important factors in determining the conversion. These results highlight NMR diffusion and relaxation techniques as novel, non-invasive characterisation tools for catalytic materials, which complement conventional reaction data.

Understanding the solvent effect on the catalytic oxidation of 1,4-butanediol in methanol over Au/TiO2 catalyst: NMR diffusion and relaxation studies.

The effect of water on the catalytic oxidation of 1,4-butanediol in methanol over Au/TiO(2) has been investigated by catalytic reaction studies and NMR diffusion and relaxation studies. The addition of water to the dry catalytic system led to a decrease of both conversion and selectivity towards dimethyl succinate. Pulsed-field gradient (PFG)-NMR spectroscopy was used to assess the effect of water addition on the effective self-diffusivity of the reactant within the catalyst. NMR relaxation studies were also carried out to probe the strength of surface interaction of the reactant in the absence and presence of water. PFG-NMR studies revealed that the addition of water to the initial system, although increasing the dilution of the system, leads to a significant decrease of effective diffusion rate of the reactant within the catalyst. From T(1) and T(2) relaxation measurements it was possible to infer the strength of surface interaction of the reactant with the catalyst surface. The addition of water was found to inhibit the adsorption of the reactant over the catalyst surface, with the T(1)/T(2) ratio of 1,4-butanediol decreasing significantly when water was added. The results overall suggest that both the decrease of diffusion rate and adsorption strength of the reactant within the catalyst, due to water addition, limits the access of reactant molecules to the catalytic sites, which results in a decrease of reaction rate and conversion.

Rapid distinction of intracellular and extracellular proteins using NMR diffusion measurements.

In-cell NMR spectroscopy offers a unique opportunity to begin to investigate the structures, dynamics, and interactions of molecules within their functional environments. An essential aspect of this technique is to define whether observed signals are attributable to intracellular species rather than to components of the extracellular medium. We report here the results of NMR measurements of the diffusion behavior of proteins expressed within bacterial cells, and find that these experiments provide a rapid and nondestructive probe of localization within cells and can be used to determine the size of the confining compartment. We show that diffusion can also be exploited as an editing method to eliminate extracellular species from high-resolution multidimensional spectra, and should be applicable to a wide range of problems. This approach is demonstrated here for a number of protein systems, using both (15)N and (13)C (methyl-TROSY) based acquisition.

Overhauser dynamic nuclear polarization amplification of NMR flow imaging.

We describe the first study comparing the ability of phase shift velocity imaging and Overhauser dynamic nuclear polarization (DNP)-enhanced imaging to generate contrast for visualizing the flow of water. Prepolarization of water by the Overhauser DNP mechanism is performed in the 0.35T fringe field of an unshielded 2.0T non-clinical MRI magnet, followed by the rapid transfer of polarization-enhanced water to the 2.0T imaging location. This technique, previously named remotely enhanced liquids for image contrast (RELIC), produces a continuous flow of hyperpolarized water and gives up to an -8.2-fold enhanced signal within the image with respect to thermally polarized signal at 2.0T. Using flow through a cylindrical expansion phantom as a model system, spin-echo intensity images with DNP are compared to 3D phase shift velocity images to illustrate the complementary information available from the two techniques. The spin-echo intensity images enhanced with DNP show that the levels of enhancement provide an estimate of the transient propagation of flow, while the phase shift velocity images quantitatively measure the velocity of each imaging voxel. Phase shift velocity images acquired with and without DNP show that DNP weights velocity values towards those of the inflowing (DNP-enhanced) water, while velocity images without DNP more accurately reflect the average steady-state velocity of each voxel. We conclude that imaging with DNP prepolarized water better captures the transient path of water shortly after injection, while phase shift velocity imaging is best for quantifying the steady-state flow of water throughout the entire phantom.

Molecular motion and ion diffusion in choline chloride based deep eutectic solvents studied by 1H pulsed field gradient NMR spectroscopy.

Deep Eutectic Solvents (DESs) are a novel class of solvents with potential industrial applications in separation processes, chemical reactions, metal recovery and metal finishing processes such as electrodeposition and electropolishing. Macroscopic physical properties such as viscosity, conductivity, eutectic composition and surface tension are already available for several DESs, but the microscopic transport properties for this class of compounds are not well understood and the literature lacks experimental data that could give a better insight into the understanding of such properties. This paper presents the first pulsed field gradient nuclear magnetic resonance (PFG-NMR) study of DESs. Several choline chloride based DESs were chosen as experimental samples, each of them with a different associated hydrogen bond donor. The molecular equilibrium self-diffusion coefficient of both the choline cation and hydrogen bond donor was probed using a standard stimulated echo PFG-NMR pulse sequence. It is shown that the increasing temperature leads to a weaker interaction between the choline cation and the correspondent hydrogen bond donor. The self-diffusion coefficients of the samples obey an Arrhenius law temperature-dependence, with values of self-diffusivity in the range of [10(-10)-10(-13) m(2) s(-1)]. In addition, the results also highlight that the molecular structure of the hydrogen bond donor can greatly affect the mobility of the whole system. While for ethaline, glyceline and reline the choline cation diffuses slower than the associated hydrogen bond donor, reflecting the trend of molecular size and molecular weight, the opposite behaviour is observed for maline, in which the hydrogen bond donor, i.e. malonic acid, diffuses slower than the choline cation, with self-diffusion coefficients values of the order of 10(-13) m(2) s(-1) at room temperature, which are remarkably low values for a liquid. This is believed to be due to the formation of extensive dimer chains between malonic acid molecules, which restricts the mobility of the whole system at low temperature (<30 °C), with malonic acid and choline chloride having almost identical diffusivity values. Diffusion and viscosity data were combined together to gain insights into the diffusion mechanism, which was found to be the same as for ionic liquids with discrete anions.

Measurement of bubble size distribution in a gas-liquid foam using pulsed-field gradient nuclear magnetic resonance.

Pulsed-field gradient nuclear magnetic resonance, previously used for measuring droplet size distributions in emulsions, has been used to measure bubble size distributions in a non-overflowing pneumatic gas-liquid foam that has been created by sparging propane into an aqueous solution of 1.5g/l (5.20mM) SDS. The bubble size distributions measured were reproducible and approximated a Weibull distribution. However, the bubble size distributions did not materially change with position at which they were measured within the froth. An analysis of foam coarsening due to Ostwald ripening in a non-overflowing foam indicates that, for the experimental conditions employed, one would not expect this to be a significant effect. It is therefore apparent that the eventual collapse of the foam is due to bubble bursting (or surface coalescence) rather than Ostwald ripening. This surface coalescence occurs because of evaporation from the free surface of the foam. An analytical solution for the liquid fraction profile for a certain class of non-overflowing pneumatic foam is given, and a mean bubble size that is appropriate for drainage calculations is suggested.

'Snap-shot' velocity vector mapping using echo-planar imaging.

A 'snap-shot' ultra-fast MRI velocimetry technique based upon the echo-planar imaging (EPI) pulse sequence is presented. The new technique is an extension of the GERVAIS pulse sequence previously developed by Sederman et al. (2004) and is capable of acquiring both reference and velocity encoded phase maps following a single excitation for generation of three-component velocity vectors in under 125 ms. This approach allows velocity images of systems with a dynamic, non-periodic geometry to be obtained by MRI. The technique proved to be accurate within 5% error by comparison with Poiseuille flow in a pipe and for the transverse plane flow field in a Couette cell. It was further applied to obtain the velocity field around an impeller in a stirred vessel; an unsteady yet periodic system which otherwise could only be studied by triggered acquisitions. Good agreement was evident between the present technique and triggered conventional velocity encoded pulse sequences. Finally, new experimental data attainable only by the new sequence is demonstrated as the flow field within a mobile droplet of oil is captured as it rises through a column of water. The technique promises to be highly useful in velocimetric measurements of dynamic, non-periodic systems, and in particular for the characterisation of multiphase flow systems.