Thermal and Structural Characterization of a Titanium Carbide/Carbon Composite for Nuclear Applications.

In the framework of ISOL (isotope separation on-line) facilities, porous carbides are among the most employed target materials for the production of radioactive ion beams for research. As foreseen by the ISOL technique, a production target is impinged by an energetic particle beam, inducing nuclear reactions from such an interaction. The resulting radionuclides are subsequently released, thanks to the high target working temperature (1600-2000 °C); ionized; and extracted into a beam. Since the target microstructure and porosity play a fundamental role in the radionuclide release efficiency, custom-made target materials are often specifically produced, resulting in unknown thermal and structural properties. Considering that such targets might undergo intense thermal stresses during operation, a thermal and structural characterization is necessary to avoid target failure under irradiation. In the presented work, a custom-made porous titanium carbide that was specifically designed for application as an ISOL target was produced and characterized. The thermal characterization was focused on the evaluation of the material emissivity and thermal conductivity in the 600-1400 °C temperature range. For the estimation of a reference material tensile stress limit, the virtual thermoelastic parameter approach was adopted. In particular, for the aforementioned temperature range, an emissivity between 0.7 and 0.8 was measured, whereas a thermal conductivity between 8 and 10 W/mK was estimated.

Thermal and Mechanical Characterization of Carbides for High Temperature Nuclear Applications.

In the facilities for the production of Radioactive Ion Beams (RIBs) according to the Isotope Separation On-Line (ISOL) technique, a production target is typically impinged by a high-power primary beam, generating radioactive isotopes for basic research and technological applications. With the aim to guarantee an efficient extraction of the aforementioned isotopes, the production target must work in a high vacuum environment, at temperatures that are usually between 1600 °C and 2200 °C. Its main components are often characterized by intense temperature gradients and consequently by severe thermal stresses. Carbides are widely used for target manufacturing, and in this work a specific method for their thermal and mechanical characterization is presented and discussed. It is based on the comparison between experimental measurements and numerical simulations, with the introduction of the novel Virtual Thermoelastic Parameters approach for the structural verification procedure. High-performance silicon carbides (SiC) are taken as a reference to describe the method. Measured emissivity and thermal conductivity data are presented and discussed, together with the experimental estimation of material limitations for both temperature and stress fields. The aforementioned results can be promptly used for the design process of high-power ISOL targets.

ISOLPHARM, a new production method of high specific activity beta-emitting radionuclides as radiopharmaceutical precursors / ISOLPHARM, un nuevo método de producción de radionúclidos emisores beta de actividad específica alta como precursores radiofarmacéuticos

Abstract At INFN-LNL (Istituto Nazionale di Fisica Nucleare- Laboratori Nazionali di Legnaro) SPES (Selective Production of Exotic Species), a new facility for the production of radioactive ion beams is being constructed at INFN-LNL (Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro). Radioactive ion beams of neutron-rich nuclei with high purity, in the range of mass between 80 and 160 amu, will be produced by nuclear reactions induced by 40 MeV protons from a cyclotron. The goal of the ISOLPHARM project is to provide a feasibility study for an innovative technology for the production of extremely very high specific activity beta emitting radionuclides as radiopharmaceutical precursors. The ISOL method, adopted in the ISOLPHARM project (a branch of the SPES project), gives the possibility of obtaining pure isobaric beams. In this way, no isotopic contaminations will be present in the beam and afterwards in a proper trapping substrate. The ground-breaking idea of the ISOLPHARM method was granted an International patent (INFN).

Resumen En INFN-LNL (Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro) SPES (Producción selectiva de especies exóticas), se está construyendo una nueva instalación para la producción de haces de iones radiactivos en INFN-LNL (Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro). Se producirán haces de iones radiactivos de núcleos ricos en neutrones con alta pureza, en el rango de masa entre 80 y 160 amu, por reacciones nucleares inducidas por protones de 40 MeV de un ciclotrón. El objetivo del proyecto ISOLPHARM es proporcionar un estudio de viabilidad para una tecnología innovadora para la producción de radionúclidos emisores de beta de actividad específica extremadamente alta como precursores radiofarmacéuticos. El método ISOL, adoptado en el proyecto ISOLPHARM (una rama del proyecto SPES), ofrece la posibilidad de obtener haces isobáricos puros. De esta manera, no habrá contaminaciones isotópicas en el haz y luego en un sustrato de atrapamiento adecuado. La idea pionera del método ISOLPHARM recibió una patente internacional (INFN).