RESUMO
Pristine graphene and h-BN monolayers are chemically inert to oxygen and thus exhibit very limited catalytic activity toward O2 activation. Herein, we show that graphene/h-BN heterostructures exhibit a surprising O2 activation capability. We theoretically designed ten graphene/h-BN heterostructures with three types of interfaces and investigated their catalytic activities toward O2 activation and CO-oxidation. In general, O2 can be molecularly chemisorbed and activated on electron-rich graphene/h-BN heterostructures. Electron-deficient graphene/h-BN heterostructures can lead to dissociative O2 adsorption with relatively low dissociation energy barriers (<0.4 eV). For CO-oxidation, the computed energy barrier can be as low as 0.67 eV. The high catalytic activities toward O2 stem from either electron-deficient heterostructures' accumulated electrons or electron richness and low work function for the electron-rich heterostructures. Although the catalytic activities of graphene/h-BN heterostructures depend strongly on the interface type, they are insensitive to the patterns of BN-substitutes, hence benefiting applicability of a wide range of heterostructures.
RESUMO
High energy consumption and high cost have been the obstacles for large-scale deployment of all state-of-the-art CO2 capture technologies. Finding a transformational way to improve mass transfer and reaction kinetics of the CO2 capture process is timely for reducing carbon footprints. In this work, commercial single-walled carbon nanotubes (CNTs) were activated with nitric acid and urea under ultrasonication and hydrothermal methods, respectively, to prepare N-doped CNTs with the functional group of -COOH, which possesses both basic and acid functionalities. The chemically modified CNTs with a concentration of 300 ppm universally catalyze both CO2 sorption and desorption of the CO2 capture process. The increases in the desorption rate achieved with the chemically modified CNTs can reach as high as 503% compared to that of the sorbent without the catalyst. A chemical mechanism underlying the catalytic CO2 capture is proposed based on the experimental results and further confirmed by density functional theory computations.
RESUMO
Methyl halides are versatile platform molecules, which have been widely adopted as precursors for producing value-added chemicals and fuels. Despite their high importance, the green and economical synthesis of the methyl halides remains challenging. Here we demonstrate sustainable and efficient photocatalytic methane halogenation for methyl halide production over copper-doped titania using alkali halides as a widely available and noncorrosive halogenation agent. This approach affords a methyl halide production rate of up to 0.61 mmol h-1 m-2 for chloromethane or 1.08 mmol h-1 m-2 for bromomethane with a stability of 28 h, which are further proven transformable to methanol and pharmaceutical intermediates. Furthermore, we demonstrate that such a reaction can also operate solely using seawater and methane as resources, showing its high practicability as general technology for offshore methane exploitation. This work opens an avenue for the sustainable utilization of methane from various resources and toward designated applications.
RESUMO
Developing efficient atomic-scale metal-supported catalysts is of great significance for energy conversion technologies. However, the precise modulation of electron transfer between the metal and supporter in atomic-scale metal-supported catalysts to further improve the catalytic activity is still a major challenge. Herein, we show tunable electron transfer between atomic-scale Pt and tungsten nitride/oxide supports (namely, Pt/WN and Pt/W18O49). Pt/WN with modest electron exchange and Pt/W18O49 with aggressive electron exchange exhibit notably different catalytic activities for the alkaline hydrogen oxidation reaction (HOR), in which Pt/WN shows a 5.7-fold enhancement in HOR intrinsic catalytic performance in comparison to Pt/W18O49. Additionally, the tunable electronic transfer at the interface of Pt/WN and Pt/W18O49, as proven by the theoretical calculation, resulted in the discrepancy of the adsorption free energy of the reaction intermediates, as well as catalytic activity, for the HOR process. Our work provides new insights into the design of advanced atomic-scale metal-supported catalysts for electrocatalysis.
RESUMO
Pushing the performance limit of catalysts is a major goal of CO2 electroreduction toward practical application. A single-atom catalyst is recognized as a solution for achieving this goal, which is, however, a double-edged sword considering the limited loading amount and stability of single-atom sites. To overcome the limit, the loading of single atoms on supports should be well addressed, requiring a suitable model system. Herein, we report the model system of an ultrasmall CeO2 cluster (2.4 nm) with an atomic precise structure and a high surface-to-volume ratio for loading Cu single atoms. The combination of multiple characterizations and theoretical calculations reveals the loading location and limit of Cu single atoms on CeO2 clusters, determining an optimal configuration for CO2 electroreduction. The optimal catalyst achieves a maximum Faradaic efficiency (FE) of 67% and a maximum partial current density of -364 mA/cm2 for CH4, and can maintain high CH4 FE values over 50% in a wide range of applied current densities (-50 â¼ -600 mA/cm2), exceeding those of the reported catalysts.
RESUMO
In order to investigate the effect of the types of interlayer anions on the adsorption performance of LDHs, herein, we synthesized three cobalt-aluminum layered double hydroxides (CoAl-LDHs) with different interlayer anions (NO3-/Cl-/CO32-). The experimental results demonstrate that the CoAl-LDH (Cl-) exhibited high adsorption capacity of 1372.1â mg/g at room temperature and the fastest adsorption rate on methyl orange (MO), mainly attributed to the excellent ion exchange capacity and high specific surface area and pore volume. Furthermore, the ion exchange driven by electrostatic interaction, hydrogen bonding, and surface complexation might be the main mechanisms for MO adsorption on CoAl-LDH (Cl-) and CoAl-LDH (NO3-). However, the MO adsorption on CoAl-LDH (CO32-) was strongly pH-dependent and the optimal pH value was about 3.5. Additionally, the supramolecular structure of CoAl-LDHs-MO was formed through electrostatic interaction, hydrogen bonding, and surface complexation between the host hydroxide layers and the guest MO- after adsorption equilibrium. An in-depth understanding of the differences in the adsorption performance of three anion-intercalated CoAl-LDHs will provide opportunities for further improvement of the adsorption capacity and exhibit a bright future for the design and optimization of efficient nano-adsorbents shortly.
Assuntos
Hidróxido de Alumínio , Compostos Azo , Adsorção , Alumínio/química , Compostos Azo/química , Hidróxidos/químicaRESUMO
The electrochemical CO2 reduction reaction (CO2RR) to produce high value-added hydrocarbons and oxygenates presents a sustainable and compelling approach toward a carbon-neutral society. However, uncontrollable migration of active sites during the electrochemical CO2RR limits its catalytic ability to simultaneously achieve high C2 selectivity and ultradurability. Here, we demonstrate that the generated interfacial CuAlO2 species can efficiently stabilize the highly active sites over the Cu-CuAlO2-Al2O3 catalyst under harsh electrochemical conditions without active sites regeneration for a long-term test. We show that this unique Cu-CuAlO2-Al2O3 catalyst exhibits ultradurable electrochemical CO2RR performance with an 85% C2 Faradaic efficiency for a 300 h test. Such a simple interfacial engineering design approach unveiled in this work would be adaptable to develop various ultradurable catalysts for industrial-scale electrochemical CO2RR.
RESUMO
Carbon-supported single-atom catalysts (SACs) are extensively studied because of their outstanding activity and selectivity toward a wide range of catalytic reactions. Amidst its development, excess dopants (e.g., nitrogen) are always required to ensure the high loading content of SACs on the carbon support. However, the use of excess dopants is accompanied by formation of miscellaneous structures (particularly the uncoordinated N species) on catalysts, leading to adverse effects on their performance. Herein, the synthesis of carbon-supported Ni SACs with precisely controlled single-atom structure via joule heating strategy, showing the coordination of 80% of N dopants with metal elements, is reported. The preclusion of the unfavorable N species is confirmed to be the main reason for the superior performance of optimized Ni SACs in electrocatalytic carbon dioxide reduction reaction, which demonstrates unprecedented activity, selectivity, and stability under an exceptionally broad voltage range (>92% CO selectivity in the range of -0.7 to -1.9 V reversible hydrogen electrode). Such a synthetic strategy is further applicable for the design of SACs with various metals. This work demonstrates a facile method for preclusion of unfavorable dopants in the SACs and its importance in catalytic application.
RESUMO
Photoelectrochemical (PEC) conversion of methane (CH4 ) has been extensively explored for the production of value-added chemicals, yet remains a great challenge in high selectivity toward C2+ products. Herein, we report the optimization of the reactivity of hydroxyl radicals (. OH) on WO3 via facet tuning to achieve efficient ethylene glycol production from PEC CH4 conversion. A combination of materials simulation and radicals trapping test provides insight into the reactivity of . OH on different facets of WO3 , showing the highest reactivity of surface-bound . OH on {010} facets. As such, the WO3 with the highest {010} facet ratio exhibits a superior PEC CH4 conversion efficiency, reaching an ethylene glycol production rate of 0.47â µmol cm-2 h-1 . Based on in situ characterization, the methanol, which could be attacked by reactive . OH to form hydroxymethyl radicals, is confirmed to be the main intermediate for the production of ethylene glycol. Our finding is expected to provide new insight for the design of active and selective catalysts toward PEC CH4 conversion.
RESUMO
Amidst the development of photoelectrochemical (PEC) CO2 conversion toward practical application, the production of high-value chemicals beyond C1 compounds under mild conditions is greatly desired yet challenging. Here, through rational PEC device design by combining Au-loaded and N-doped TiO2 plate nanoarray photoanode with Zn-doped Cu2O dark cathode, efficient conversion of CO2 to CH3COOH has been achieved with an outstanding Faradaic efficiency up to 58.1% (91.5% carbon selectivity) at 0.5 V vs. Ag/AgCl. Temperature programmed desorption and in situ Raman spectra reveal that the Zn-dopant in Cu2O plays multiple roles in selective catalytic CO2 conversion, including local electronic structure manipulation and active site modification, which together promote the formation of intermediate *CH2/*CH3 for C-C coupling. Apart from that, it is also unveiled that the sufficient electron density provided by the Au-loaded and N-doped TiO2 plate nanoarray photoanode plays an equally important role by initiating multi-electron CO2 reduction. This work provides fresh insights into the PEC system design to reach the multi-electron reduction reaction and facilitate the C-C coupling reaction toward high-value multicarbon (C2+) chemical production via CO2 conversion.
RESUMO
Photocatalysis provides an intriguing approach for the conversion of methane to multicarbon (C2+) compounds under mild conditions; however, with methyl radicals as the sole reaction intermediate, the current C2+ products are dominated by ethane, with a negligible selectivity toward ethylene, which, as a key chemical feedstock, possesses higher added value than ethane. Herein, we report a direct photocatalytic methane-to-ethylene conversion pathway involving the formation and dehydrogenation of alkoxy (i.e., methoxy and ethoxy) intermediates over a Pd-modified ZnO-Au hybrid catalyst. On the basis of various in situ characterizations, it is revealed that the Pd-induced dehydrogenation capability of the catalyst holds the key to turning on the pathway. During the reaction, methane molecules are first dissociated into methoxy on the surface of ZnO under the assistance of Pd. Then these methoxy intermediates are further dehydrogenated and coupled with methyl radical into ethoxy, which can be subsequently converted into ethylene through dehydrogenation. As a result, the optimized ZnO-AuPd hybrid with atomically dispersed Pd sites in the Au lattice achieves a methane conversion of 536.0 µmol g-1 with a C2+ compound selectivity of 96.0% (39.7% C2H4 and 54.9% C2H6 in total produced C2+ compounds) after 8 h of light irradiation. This work provides fresh insight into the methane conversion pathway under mild conditions and highlights the significance of dehydrogenation for enhanced photocatalytic activity and unsaturated hydrocarbon product selectivity.
RESUMO
In metal-free carbon-fullerene-based or defective graphene-based electrocatalysts, pentagon rings are known to play a key role in boosting catalytic activities for the oxygen reduction reaction (ORR). However, the fundamental chemical mechanism underlying the remarkable catalytic effect of the pentagon rings towards the ORR is still not fully understood. Herein, we perform a comprehensive computational study of the catalytic activities of various carbon fullerenes and fullerene fragment species, all containing pentagon rings, by using the density functional theory (DFT) and computational hydrogen electrode (CHE) methods. We find that more active sites on carbon are associated with more neighbouring pentagon rings and stronger adsorption of the key intermediates of O*, OH* and OOH* for the ORR. Importantly, two C60-based fragments, namely, C60-frag1 and C60-frag2l, show a very high activity towards the ORR, as both yield overpotentials as low as 0.389 and 0.407 V, and entail suitable adsorption free energy of OH* and OOH* species. These desirable chemical properties of fullerene fragments can be attributed to the high-energy HOMO orbitals, induced by the low-symmetry fullerene-fragment structures. Both the number of neighbouring pentagon rings and the degree of overall symmetry of the fragment appear to be the two important factors that can be adjusted for the design of optimal metal-free carbon electrocatalysts towards high ORR activities.
RESUMO
Two-dimensional (2D) semiconductors with suitable direct band gaps, high carrier mobility, and excellent open-air stability are especially desirable for material applications. Herein, we show theoretical evidence of a new phase of a copper(i) sulfide (Cu2S) monolayer, denoted δ-Cu2S, with both novel electronic properties and superior oxidation resistance. We find that both monolayer and bilayer δ-Cu2S have much lower formation energy than the known ß-Cu2S phase. Given that ß-Cu2S sheets have been recently synthesized in the laboratory (Adv. Mater.2016, 28, 8271), the higher stability of δ-Cu2S than that of ß-Cu2S sheets suggests a high possibility of experimental realization of δ-Cu2S. Stability analysis indicates that δ-Cu2S is dynamically and thermally stable. Notably, δ-Cu2S exhibits superior oxidation resistance, due to the high activation energy of 1.98 eV for the chemisorption of O2 on δ-Cu2S. On its electronic properties, δ-Cu2S is a semiconductor with a modest direct band gap (1.26 eV) and an ultrahigh electron mobility of up to 6880 cm2 V-1 s-1, about 27 times that (246 cm2 V-1 s-1) of the ß-Cu2S bilayer. The marked difference between the electron and hole mobilities of δ-Cu2S suggests easy separation of electrons and holes for solar energy conversion. Combination of these novel properties makes δ-Cu2S a promising 2D material for future applications in electronics and optoelectronics with high thermal and chemical stability.
RESUMO
Manipulation of the chemical reactivity of two-dimensional materials is a challenge for advancing various nanotechnologies, ranging from electronics to catalysis. In this study, on the basis of first-principles calculations, we demonstrated that the chemical reactivity of h-BN sheets towards O2 can be significantly enhanced via a metal substrate-mediated charge effect. The chemisorption of O2 molecule on the h-BN sheet deposited on Ni, Co, or Cu substrate were almost spontaneous with negligible energy barrier, distinctly different from that on the freestanding h-BN sheet, which has ultra-high chemical stability. In particular, the enhanced oxidation of h-BN sheet can be confined in the nanoscale region due to the localized electronic states in the h-BN sheet. These findings imply a pathway to selectively oxidize h-BN sheet by patterning the metal substrate.
RESUMO
Pt(100) facets are generally considered less active for the oxygen reduction reaction (ORR). Reported herein is a unique Pt-branched structure, a multicube, whose surface is mostly enclosed by {100} facets but contains high-index facets at the small junction area between the adjacent cubic components. The synthesis is accomplished by a Ni(2+) -mediated facet evolution from high-index {311} to {100} facets on the frameworks of multipods. Despite the high {100} facet coverage, the Pt multicubes exhibit impressive ORR activity in terms of half-wave potential and current density nearly to the level of the most active Pt-based catalysts, while the durability of catalysts is well retained. The facet evolution creates a set of samples with tunable ratios of high-index to low-index facets. The results reveal that the excellent ORR performance of Pt multicubes is a combined result of active sites by high-index facets and low resistance by flat surface. It is anticipated that this work will offer a new approach to facet-controlled synthesis and ORR catalysts design.
RESUMO
A Ru(3+)-mediated synthesis for the unique Pd concave nanostructures, which can directly harvest UV-to-visible light for styrene hydrogenation, is described. The catalytic efficiency under 100â mW cm(-2) full-spectrum irradiation at room temperature turns out to be comparable to that of thermally (70 °C) driven reactions. The yields obtained with other Pd nanocrystals, such as nanocubes and octahedrons, are lower. The nanostructures reported here have sufficient plasmonic cross-sections for light harvesting in a broad spectral range owing to the reduced shape symmetry, which increases the solution temperature for the reaction by the photothermal effect. They possess a large quantity of atoms at corners and edges where local heat is more efficiently generated, thus providing active sites for the reaction. Taken together, these factors drastically enhance the hydrogenation reaction by light illumination.
RESUMO
The CO oxidation behaviors on single Au atom embedded in two-dimensional h-BN monolayer are investigated on the basis of first-principles calculations, quantum Born-Oppenheim molecular dynamic simulations (BOMD) and micro-kinetic analysis. We show that CO oxidation on h-BN monolayer support single gold atom prefers an unreported tri-molecular Eley-Rideal (E-R) reaction, where O2 molecule is activated by two pre-adsorbed CO molecules. The formed OCOAuOCO intermediate dissociates into two CO2 molecules synchronously, which is the rate-limiting step with an energy barrier of 0.47â eV. By using the micro-kinetic analysis, the CO oxidation following the tri-molecular E-R reaction pathway entails much higher reaction rate (1.43 × 10(5)â s(-1)) than that of bimolecular Langmuir-Hinshelwood (L-H) pathway (4.29â s(-1)). Further, the quantum BOMD simulation at the temperature of 300â K demonstrates the complete reaction process in real time.
RESUMO
The charge state of the Pd surface is a critical parameter in terms of the ability of Pd nanocrystals to activate O2 to generate a species that behaves like singlet O2 both chemically and physically. Motivated by this finding, we designed a metal-semiconductor hybrid system in which Pd nanocrystals enclosed by {100} facets are deposited on TiO2 supports. Driven by the Schottky junction, the TiO2 supports can provide electrons for metal catalysts under illumination by appropriate light. Further examination by ultrafast spectroscopy revealed that the plasmonics of Pd may force a large number of electrons to undergo reverse migration from Pd to the conduction band of TiO2 under strong illumination, thus lowering the electron density of the Pd surface as a side effect. We were therefore able to rationally tailor the charge state of the metal surface and thus modulate the function of Pd nanocrystals in O2 activation and organic oxidation reactions by simply altering the intensity of light shed on Pd-TiO2 hybrid structures.
RESUMO
In many organic reactions, the O(2) activation process involves a key step where inert ground triplet O(2) is excited to produce highly reactive singlet O(2). It remains elusive what factor induces the change in the electron spin state of O(2) molecules, although it has been discovered that the presence of noble metal nanoparticles can promote the generation of singlet O(2). In this work, we first demonstrate that surface facet is a key parameter to modulate the O(2) activation process on metal nanocrystals, by employing single-facet Pd nanocrystals as a model system. The experimental measurements clearly show that singlet O(2) is preferentially formed on {100} facets. The simulations further elucidate that the chemisorption of O(2) to the {100} facets can induce a spin-flip process in the O(2) molecules, which is achieved via electron transfer from Pd surface to O(2). With the capability of tuning O(2) activation, we have been able to further implement the {100}-faceted nanocubes in glucose oxidation. It is anticipated that this study will open a door to designing noble metal nanocatalysts for O(2) activation and organic oxidation. Another perspective of this work would be the controllability in tailoring the cancer treatment materials for high (1)O(2) production efficiency, based on the facet control of metal nanocrystals. In the cases of both organic oxidation and cancer treatment, it has been exclusively proven that the efficiency of producing singlet O(2) holds the key to the performance of Pd nanocrystals in the applications.