RESUMO
INTRODUCTION: Denture stomatitis is the most common pathology affecting denture wearers and its main cause is colonisation of dentures with Candida albicans. OBJECTIVE: This study investigated the effectiveness of two commercial composite surface sealants (Biscover(®) LV and Surface Coat(®)) to reduce C. albicans biofilm colonisation on denture resin, as well as their surface integrity after disinfection cycles with 1% sodium hypochlorite solution. METHODS: Heat-cured acrylic resin specimens were manufactured (10 mm × 10 mm × 1 mm). The specimen surfaces were mechanically polished to simulate rough or smooth denture surfaces. Four surface-treatment groups were tested: smooth surfaces [0.3 µm of mean roughness (Ra)]; rough surfaces (3 µm of Ra); rough surfaces treated with Biscover(®) LV; and rough surfaces treated with Surface Coat(®). Specimens of each group were randomly divided to undergo immersion in distilled water or 1% sodium hypochlorite for 30 or 90 cycles each. Specimens of all groups in each immersion solution were tested using a crystal violet (CV) staining assay for biofilm quantification and by scanning electron microscopy for visual analyses of surface integrity and biofilm structure. CV assay data were analysed using one-way analysis of variance (ANOVA) followed by Tukey's multiple comparison test (P < 0.05). RESULTS: The effectiveness and surface integrity of Biscover(®) LV-treated surfaces were similar to those of smooth surfaces, whereas Surface Coat(®) -treated surfaces presented a similar performance to rough surfaces in all solutions and cycles. CONCLUSION: These results suggest the possibility of clinical use of Biscover(®) LV for denture coating on surfaces in which mechanical polish is not indicated, such as the fitting surface.