Review of Microbottle Resonators for Sensing Applications.

Microbottle resonators (MBR) are bottle-like structures fabricated by varying the radius of an optical fiber. MBRs can support whispering gallery modes (WGM) by the total internal reflection of the light coupled into the MBRs. MBRs have a significant advantage in sensing and other advanced optical applications due to their light confinement abilities in a relatively small mode volume and having high Q factors. This review starts with an introduction to MBRs' optical properties, coupling methods, and sensing mechanisms. The sensing principle and sensing parameters of MBRs are discussed here as well. Then, practical MBRs fabrication methods and sensing applications are presented.

Single and Bunch Soliton Generation in Optical Fiber Lasers Using Bismuth Selenide Topological Insulator Saturable Absorber.

In this work, we present the generation of two distinct types of soliton pulses using a Bismuth Selenide (Bi2Se3) saturable absorber (SA) synthesized in our laboratory. The soliton pulses were generated in two different laser cavity configurations, resulting in two types of solitons: a soliton pulse with Kelly sidebands and a bunched soliton pulse with peak-dip sidebands. Both solitons operated at the fundamental repetition rate-23.3 MHz (for the soliton with Kelly sidebands) and 13 MHz (for the bunched soliton with peak-dip sidebands). We observed that the accumulation of nonlinear phase shift from the added single mode fiber (SMF) split the single soliton pulse into 44 pulses in a bunched oscillation envelope. At the same time, peak-dip sidebands were imposed on the bunched soliton spectrum due to constructive and destructive interferences between soliton pulse and dispersive waves. The measured pulse width for both solitons were 0.63 ps (for the soliton with Kelly sidebands) and 1.52 ps (for the bunched soliton with peak-dip sidebands), respectively. Our results demonstrate the potential of Bi2Se3 SAs in generating different types of soliton pulses, which could have potential applications in various areas of optical communication and spectroscopy.

Dissipative Soliton Mode-Locked Erbium-Doped Fiber Laser Using Nb2AlC Nanomaterial Saturable Absorber.

We report the fabrication of an erbium-doped fiber-based saturable absorber (SA) of niobium aluminium carbide (Nb2AlC) nanomaterial that can generate a dissipative soliton mode-locked pulse. Stable mode-locked pulses operating at 1530 nm with repetition rates of 1 MHz and pulse widths of 6.375 ps were produced using polyvinyl alcohol (PVA) and the Nb2AlC nanomaterial. A peak pulse energy of 7.43 nJ was measured at 175.87 mW pump power. In addition to providing some useful design suggestions for manufacturing SAs based on MAX phase materials, this work shows the MAX phase materials' immense potential for making ultra-short laser pulses.