Understanding protein-nanoparticle interactions leading to protein corona formation: In vitro - in vivo correlation study.

Nanoparticles (NPs) in contact with biological fluids form a biomolecular corona through interactions with proteins, lipids, and sugars, acquiring new physicochemical properties. This work explores the interaction between selected proteins (hemoglobin and fetuin-A) that may alter NP circulation time and NPs of different surface charges (neutral, positive, and negative). The interaction with key proteins albumin and transferrin, the two of the most abundant proteins in plasma was also studied. Binding affinity was investigated using quartz crystal microbalance and fluorescence quenching, while circular dichroism assessed potential conformational changes. The data obtained from in vitro experiments were compared to in vivo protein corona data. The results indicate that electrostatic interactions primarily drive protein-NP interactions, and higher binding affinity does not necessarily translate into more significant structural changes. In vitro and single protein-NP studies provide valuable insights that can be correlated with in vivo observations, opening exciting possibilities for future protein corona studies.

Facile Functionalization of Carbon Electrodes for Efficient Electroenzymatic Hydrogen Production.

Enzymatic electrocatalysis holds promise for new biotechnological approaches to produce chemical commodities such as molecular hydrogen (H2). However, typical inhibitory limitations include low stability and/or low electrocatalytic currents (low product yields). Here we report a facile single-step electrode preparation procedure using indium-tin oxide nanoparticles on carbon electrodes. The subsequent immobilization of a model [FeFe]-hydrogenase from Clostridium pasteurianum ("CpI") on the functionalized carbon electrode permits comparatively large quantities of H2 to be produced in a stable manner. Specifically, we observe current densities of >8 mA/cm2 at -0.8 V vs the standard hydrogen electrode (SHE) by direct electron transfer (DET) from cyclic voltammetry, with an onset potential for H2 production close to its standard potential at pH 7 (approximately -0.4 V vs. SHE). Importantly, hydrogenase-modified electrodes show high stability retaining ∼92% of their electrocatalytic current after 120 h of continuous potentiostatic H2 production at -0.6 V vs. SHE; gas chromatography confirmed ∼100% Faradaic efficiency. As the bioelectrode preparation method balances simplicity, performance, and stability, it paves the way for DET on other electroenzymatic reactions as well as semiartificial photosynthesis.

Nanomechanical and structural study of Au38 nanocluster Langmuir-Blodgett films using bimodal atomic force microscopy and X-ray reflectivity.

HYPOTHESIS: Langmuir-Blodgett (LB) technique allows the deposition of gold nanoparticles and nanoclusters (atomically precise nanoparticles below 2 nm in diameter) onto solid substrates with an unprecedented degree of control and high transfer ratios. Nanoclusters are expected to follow the crinkle folding mechanism, which promotes the formation of trilayers of nanoparticles but kinetically disfavors the formation of the fourth layer. EXPERIMENTS: LB films of Au38(SC2H4Ph)24 nanocluster were prepared at a range of surface pressures in the bilayer/trilayer regime and their internal structure was analyzed with X-ray Reflectivity (XRR) and Grazing-Incidence Wide-Angle X-ray Scattering (GIWAXS). Bimodal atomic force microscopy (AFM) imaging was used to quantify the elastic modulus, which can be correlated with the topography at the same point on the surface. FINDINGS: Nanocluster bilayers and trilayers exhibited the elastic moduli of ca. 1.2 GPa and 0.9 GPa respectively. Films transferred in the 20-25 mN/m surface pressure regime displayed a particular propensity to form highly vertically organized trilayers. Further compression resulted in disorganization of the layers. Crucially, the use of two cantilevers of contrasting stiffness for bimodal AFM measurements has demonstrated a new approach to quantify the mechanical properties of ultrathin films without the use of deconvolution algorithms to remove the substrate contribution.

Enzymatic and Microbial Electrochemistry: Approaches and Methods.

The coupling of enzymes and/or intact bacteria with electrodes has been vastly investigated due to the wide range of existing applications. These span from biomedical and biosensing to energy production purposes and bioelectrosynthesis, whether for theoretical research or pure applied industrial processes. Both enzymes and bacteria offer a potential biotechnological alternative to noble/rare metal-dependent catalytic processes. However, when developing these biohybrid electrochemical systems, it is of the utmost importance to investigate how the approaches utilized to couple biocatalysts and electrodes influence the resulting bioelectrocatalytic response. Accordingly, this tutorial review starts by recalling some basic principles and applications of bioelectrochemistry, presenting the electrode and/or biocatalyst modifications that facilitate the interaction between the biotic and abiotic components of bioelectrochemical systems. Focus is then directed toward the methods used to evaluate the effectiveness of enzyme/bacteria-electrode interaction and the insights that they provide. The basic concepts of electrochemical methods widely employed in enzymatic and microbial electrochemistry, such as amperometry and voltammetry, are initially presented to later focus on various complementary methods such as spectroelectrochemistry, fluorescence spectroscopy and microscopy, and surface analytical/characterization techniques such as quartz crystal microbalance and atomic force microscopy. The tutorial review is thus aimed at students and graduate students approaching the field of enzymatic and microbial electrochemistry, while also providing a critical and up-to-date reference for senior researchers working in the field.

Thickness of the particle-free layer near charged interfaces in suspensions of like-charged nanoparticles.

When a suspension of charged nanoparticles is in contact with a like-charged water-solid interface, next to this interface a particle-free layer is formed. The present study provides reliable measurements of the thickness of this particle-free layer with three different techniques, namely optical reflectivity, quartz crystal microbalance (QCM), and direct force measurements with atomic force microscopy (AFM). Suspensions of negatively charged nanoparticles of different size and type are investigated. When the measured layer thickness is normalized to the particle size, one finds that this normalized thickness shows universal inverse square root dependence on the particle volume fraction. This universal dependence can be also derived from Poisson-Boltzmann theory for highly asymmetric electrolytes, whereby one has to assume that the nanoparticles represent the multivalent coions.

Deposition of Extended Ordered Ultrathin Films of Au38 (SC2 H4 Ph)24 Nanocluster using Langmuir-Blodgett Technique.

Langmuir-Blodgett technique is utilized to deposit ultrathin films of Au38 (SC2 H4 Ph)24 nanocluster onto solid surfaces such as mica and silicon. The morphologies of the films transferred at various surface pressures within the mono/bi/trilayer regime are studied by atomic force microscopy (AFM). The time spent on the water surface before the deposition has a decisive effect on the final ordering of nanoclusters within the network and is studied by fast AFM, X-ray reflectivity, and grazing-incidence wide-angle X-ray scattering.

Structural and Double Layer Forces between Silica Surfaces in Suspensions of Negatively Charged Nanoparticles.

Direct force measurements between negatively charged silica microparticles are carried out in suspensions of like-charged nanoparticles with atomic force microscopy (AFM). In agreement with previous studies, oscillatory force profiles are observed at larger separation distances. At smaller distances, however, soft and strongly repulsive forces are present. These forces are caused by double layer repulsion between the like-charged surfaces and can be quantitatively interpreted with the Poisson-Boltzmann (PB) model. However, the PB model must be adapted to a strongly asymmetric electrolyte to capture the nonexponential nature of these forces. Thereby, the nanoparticles are modeled as highly charged co-ions, while the counter ions are monovalent. This model permits extraction of the effective charge of the nanoparticles, which is well comparable to the one obtained from electrophoresis. The PB model also explains the presence of a particle-free layer close to the interface.

Oscillatory structural forces between charged interfaces in solutions of oppositely charged polyelectrolytes.

Forces between negatively charged micron-sized silica particles were measured in aqueous solutions of cationic polyelectrolytes with an atomic force microscope (AFM). In these oppositely charged systems, damped oscillatory force profiles were systematically observed in systems at higher polyelectrolyte concentrations, typically around few g L-1. The wavelength of these oscillations is decreasing with increasing concentration. When the wavelength and concentration are normalized with the cross-over concentration, universal power-law dependence is found. Thereby, the corresponding scaling exponent changes from 1/3 in the dilute regime to 1/2 in the semi-dilute regime. This dependence is the same as in the like-charged systems, which were described in the literature earlier. This common behavior suggests that these oscillatory forces are related to the structuring of the polyelectrolyte solutions. The reason that the oppositely charged systems behave similarly to like-charged ones is that the former systems undergo a charge reversal due to the adsorption of the polyelectrolytes to the oppositely charged surface, whereby sufficiently homogeneous adsorbed layers are being formed. The main finding of the present study is that at higher polyelectrolyte concentrations such oscillatory forces are the rule, including the oppositely charged ones.

Swelling Behavior, Interaction, and Electrostatic Properties of Chitosan/Alginate Dialdehyde Multilayer Films with Different Outermost Layer.

In this study, self-cross-linked chitosan/alginate dialdehyde multilayer films, capped with either alginate dialdehyde (6 layers) or chitosan (7 layers), were fabricated using the layer-by-layer method. The disruption of the electrostatic equilibrium when exposing the fabricated layers to acidic and alkaline conditions causes swelling within the film and independently in the outermost layer, showing dependence on the ionic strength. Spectroscopic ellipsometry and quartz crystal microbalance with dissipation monitoring were employed to examine the swelling behavior. Atomic force microscopy colloidal probe measurements were conducted to assess the surface forces between the multilayer films at different pH and ionic strengths. Finally, the electrostatic properties of the multilayer films were examined at different pH and ionic strengths using zeta potential measurements. The results suggest that stimuli-responsiveness and overall swelling behavior of the polysaccharide multilayer films significantly depend on the outermost layer, an effect that should expectedly become more pronounced the thinner the film becomes.

Structuring of colloidal silica nanoparticle suspensions near water-silica interfaces probed by specular neutron reflectivity.

Structuring of aqueous suspensions of colloidal silica nanoparticles near an isolated planar silica-water interface is studied by specular neutron reflectivity. The reflectivity data clearly show that the suspensions develop a damped, oscillatory concentration profile in the normal direction to the interface. The wavelengths of these oscillations agree well with those independently determined by direct force measurements in the slit-geometry. The reflectivity data further demonstrate that the oscillatory structure persists over several layers and that the first particle layer is separated from the interface by a particle-free region.

In situ Imaging of Single Polyelectrolyte Chains with the Atomic Force Microscope.

This article discusses the possibilities offered by modern atomic force microscopes (AFMs) with ultra-small cantilevers to perform in situ imaging of single adsorbed polyelectrolytes in aqueous solutions. We demonstrate that such AFM techniques permit high quality images of single polyelectrolyte molecules to be obtained. These images can then be used to qualitatively address differences in the adsorbed conformations for different polyelectrolyte architectures. Moreover, such images can be also analyzed quantitatively. As an example, we discuss the determination of the persistence length of adsorbed polyelectrolytes.

Unexpectedly Large Decay Lengths of Double-Layer Forces in Solutions of Symmetric, Multivalent Electrolytes.

Double-layer forces acting between micron-sized silica particles are measured with the atomic force microscope in solutions of symmetric, multivalent electrolytes. In particular, the 2:2 electrolytes, CuSO4 and MgSO4, and the 3:3 electrolyte LaFe(CN)6 were investigated. For the multivalent electrolytes, the measured decay lengths are substantially larger than the ones expected on the basis of simple Debye-Hückel (DH) theory. These deviations can be explained quantitatively by the formation of neutral ion pairs. The measured surface charge density decreases in magnitude with increasing valence. Both effects are caused by ion-ion correlations, which are not included in the classical DH theory. However, this theory remains applicable, provided one considers the formation of ion pairs in solution and an effective surface charge density. This effective charge is substantially smaller in magnitude than the one of the bare surface. This reduction results from adsorption of counterions, which becomes stronger with increasing valence. These observations reveal that DH theory is applicable even in the presence of multivalent ions, provided the effective parameters are chosen appropriately.

Rapid Desorption of Polyelectrolytes from Solid Surfaces Induced by Changes of Aqueous Chemistry.

The short-term desorption induced by changes of aqueous chemistry of predeposited polyelectrolyte layers on solid surfaces was studied with reflectometry. The behavior of a strong polycation, polydiallydimethylammonium chloride (PDADMAC), interacting with flat silica was investigated in detail. Results showed that partial desorption of preadsorbed polymer chains can be quickly triggered by changes in ionic strength and pH. When lowering these parameters in the PDADMAC-silica system, the increased lateral repulsive potential of neighboring chains drove the desorption of some of the polymer. Furthermore, layer desorption was favored when electrostatic interactions between a polyelectrolyte and the underlying surface became less attractive or switched to being repulsive. At the investigated timescales (<1 h), adlayer desorption was always partial and often incomplete. When initiating desorption from a condition of large adsorbed mass, desorption effects did not result in the plateau mass obtained by adsorption on a clean surface: an excess mass remained deposited. The results thus suggest that a relatively large energy barrier needs to be overcome to induce redissolution of predeposited chains and that this barrier may be a function of the number of polymer-surface interactions, which are in turn correlated with polymer molecular mass. These mechanisms have important implications for environmental processes and colloidal systems because they imply that, once adsorbed, polymeric chains may be redissolved but only to a limited degree at typical engineering timescales.

Interactions between similar and dissimilar charged interfaces in the presence of multivalent anions.

Direct force measurements involving amidine latex (AL) and sulfate latex (SL) particles in aqueous solutions containing multivalent ferrocyanide anions are presented. These measurements feature three different pairs of particles, namely SL-SL, AL-SL, and AL-AL. The force profiles are quantitatively interpreted in terms of the theory by Derjaguin, Landau, Verwey, and Overbeek (DLVO) that is combined with a short-ranged exponential attraction. In monovalent salt solutions, the AL particles are positively charged, while the SL particles are negatively charged. In solutions containing ferrocyanide, the charge of the AL particles is reversed as the concentration is increased. The longer-ranged component of all force profiles is fully compatible with DLVO theory, provided effects of charge regulation are included. At shorter distances, an additional exponential attraction must be introduced, whereby the respective decay length is about 2 nm for the AL-AL pair, and below 1 nm for the SL-SL pair. This non-DLVO force is intermediate for the asymmetric AL-SL pair. These additional forces are probably related to charge fluctuations, patch-charged interactions, or hydrophobic forces.

Size extensivity of elastic properties of alkane fragments.

Using MP2, CCSD, and B3LYP methods of computational chemistry, we show length dependence in the intrinsic elastic properties of short alkane fragments. For isolated alkane fragments of finite length in the gas phase and zero temperature, the intrinsic elasticity constants are found to vary with the number of carbon atoms and its parity. From extrapolation of the elasticity constants calculations to infinite chain length, and by comparing with in-situ elasticity constant of single poly(ethylene) molecule obtained with atomic force microscopy, we estimate the softening effect of environment on the extension response of the polymer.

Attractive non-DLVO forces induced by adsorption of monovalent organic ions.

Direct force measurements between negatively charged colloidal particles were carried out using an atomic force microscope (AFM) in aqueous solutions containing monovalent organic cations, namely tetraphenylarsonium (Ph4As+), 1-hexyl-3-methylimidazolium (HMIM+), and 1-octyl-3-methylimidazolium (OMIM+). These ions adsorb to the particle surface, and induce a charge reversal. The forces become attractive at the charge neutralization point, but they are stronger than van der Waals forces. This additional and unexpected attraction decays exponentially with a decay length of a few nanometers, and is strikingly similar to the one previously observed in the presence of multivalent ions. This attractive force probably originates from coupled spontaneous charge fluctuations on the respective surfaces as initially suggested by Kirkwood and Shumaker.

Depletion and double layer forces acting between charged particles in solutions of like-charged polyelectrolytes and monovalent salts.

Interaction forces between silica particles were measured in aqueous solutions of the sodium salt of poly(styrene sulphonate) (PSS) and NaCl using the colloidal probe technique based on an atomic force microscope (AFM). The observed forces can be rationalized through a superposition of damped oscillatory forces and double layer forces quantitatively. The double layer forces are modeled using Poisson-Boltzmann (PB) theory for a mixture of a monovalent symmetric electrolyte and a highly asymmetric electrolyte, whereby the multivalent coions represent the polyelectrolyte chains. The effective charge of the polyelectrolyte is found to be smaller than the bare number of charged groups residing on one polyelectrolyte molecule. This effect can be explained by counterion condensation. The interplay between depletion and double layer forces can be further used to predict the phase of the depletion force oscillations. However, this picture holds only at not too elevated concentrations of the polyelectrolyte and salt. At higher salt concentrations, attractive van der Waals forces become important, while at higher polyelectrolyte concentrations, the macromolecules adsorb onto the like-charged silica interface.

Quantitative Nano-characterization of Polymers Using Atomic Force Microscopy.

The present article offers an overview on the use of atomic force microscopy (AFM) to characterize the nanomechanical properties of polymers. AFM imaging reveals the conformations of polymer molecules at solid- liquid interfaces. In particular, for polyelectrolytes, the effect of ionic strength on the conformations of molecules can be studied. Examination of force versus extension profiles obtained using AFM-based single molecule force spectroscopy gives information on the entropic and enthalpic elasticities in pN to nN force range. In addition, single molecule force spectroscopy can be used to trigger chemical reactions and transitions at the molecular level when force-sensitive chemical units are embedded in a polymer backbone.

Forces between different latex particles in aqueous electrolyte solutions measured with the colloidal probe technique.

In this article, a compilation of results on direct force measurements between colloidal particles in monovalent salts carried out with the colloidal probe technique based on Atomic Force Microscopy was presented. The interaction forces between similar and dissimilar particles was studied and it was concluded that, in general, these force profiles may be satisfactorily quantified by the DLVO theory down to distances of few nanometers. However, in the specific case where the charge of one of the involved particle is close to neutral, it was found that the surface potential of this particle may change its sign depending on the sign of charge of the opposite particle. In this respect, the assumption that the surface potential of a particle is a property only related to the particle surface features and the bulk properties is called into question. Microsc. Res. Tech. 80:144-152, 2017. © 2016 Wiley Periodicals, Inc.

Influence of Solvent Quality on the Force Response of Individual Poly(styrene) Polymer Chains.

Single molecule mechanics of poly(styrene) polymer chains is investigated in different organic solvents with atomic force microscopy (AFM). The acquired force-extension profiles can be well fitted with a modified freely jointed chain (FJC) model. The model describes the force-extension profiles in terms of an apparent Kuhn length and an elasticity constant. The elasticity constant is found to be the same for all different solvents investigated. Best fit of the force-extension profiles with the FJC model reveals that the Kuhn length varies systematically with solvent quality. In fact, one can establish a good correlation between the Kuhn length and the Flory-Huggins interaction parameter. The increase in the Kuhn length with increasing solvent quality reflects the larger extent of swelling of the polymer in good solvents.