Reducing Transmission of Airborne Respiratory Pathogens: A New Beginning as the COVID-19 Emergency Ends.

BACKGROUND: In response to the COVID-19 pandemic, new evidence-based strategies have emerged for reducing transmission of respiratory infections through management of indoor air. OBJECTIVES: This paper reviews critical advances that could reduce the burden of disease from inhaled pathogens and describes challenges in their implementation. DISCUSSION: Proven strategies include assuring sufficient ventilation, air cleaning by filtration, and air disinfection by germicidal ultraviolet (UV) light. Layered intervention strategies are needed to maximize risk reduction. Case studies demonstrate how to implement these tools while also revealing barriers to implementation. Future needs include standards designed with infection resilience and equity in mind, buildings optimized for infection resilience among other drivers, new approaches and technologies to improve ventilation, scientific consensus on the amount of ventilation needed to achieve a desired level of risk, methods for evaluating new air-cleaning technologies, studies of their long-term health effects, workforce training on ventilation systems, easier access to federal funds, demonstration projects in schools, and communication with the public about the importance of indoor air quality and actions people can take to improve it. https://doi.org/10.1289/EHP13878.

Doff Thy Gown - Shedding Contact Precautions for COVID-19.

SARS-CoV-2 is predominantly transmitted through aerosols (i.e., airborne transmission), however, the US Centers for Disease Control and Prevention continue to recommend the use of contact precautions (a gown and gloves) for the care of patients with COVID-19. Infection prevention guidelines should reflect the current science and eliminate this wasteful practice.

Mandating indoor air quality for public buildings.

If some countries lead by example, standards may increasingly become normalized.

Digital Surface-Enhanced Raman Spectroscopy-Lateral Flow Test Dipstick: Ultrasensitive, Rapid Virus Quantification in Environmental Dust.

This study introduces a novel surface-enhanced Raman spectroscopy (SERS)-based lateral flow test (LFT) dipstick that integrates digital analysis for highly sensitive and rapid viral quantification. The SERS-LFT dipsticks, incorporating gold-silver core-shell nanoparticle probes, enable pixel-based digital analysis of large-area SERS scans. Such an approach enables ultralow-level detection of viruses that readily distinguishes positive signals from background noise at the pixel level. The developed digital SERS-LFTs demonstrate limits of detection (LODs) of 180 fg for SARS-CoV-2 spike protein, 120 fg for nucleocapsid protein, and 7 plaque forming units for intact virus, all within <30 min. Importantly, digital SERS-LFT methods maintain their robustness and their LODs in the presence of indoor dust, thus underscoring their potential for accurate and reliable virus diagnosis and quantification in real-world environmental settings.

Seasonal influenza viruses decay more rapidly at intermediate humidity in droplets containing saliva compared to respiratory mucus.

Expulsions of virus-laden aerosols or droplets from the oral and nasal cavities of an infected host are an important source of onward respiratory virus transmission. However, the presence of infectious influenza virus in the oral cavity during infection has not been widely considered, and thus, little work has explored the environmental persistence of influenza virus in oral cavity expulsions. Using the ferret model, we detected infectious virus in the nasal and oral cavities, suggesting that the virus can be expelled into the environment from both anatomical sites. We also assessed the stability of two influenza A viruses (H1N1 and H3N2) in droplets of human saliva or respiratory mucus over a range of relative humidities. We observed that influenza virus infectivity decays rapidly in saliva droplets at intermediate relative humidity, while viruses in airway surface liquid droplets retain infectivity. Virus inactivation was not associated with bulk protein content, salt content, or droplet drying time. Instead, we found that saliva droplets exhibited distinct inactivation kinetics during the wet and dry phases at intermediate relative humidity, and droplet residue morphology may lead to the elevated first-order inactivation rate observed during the dry phase. Additionally, distinct differences in crystalline structure and nanobead localization were observed between saliva and airway surface liquid droplets. Together, our work demonstrates that different respiratory fluids exhibit unique virus persistence profiles and suggests that influenza viruses expelled from the oral cavity may contribute to virus transmission in low- and high-humidity environments.IMPORTANCEDetermining how long viruses persist in the environment is important for mitigating transmission risk. Expelled infectious droplets and aerosols are composed of respiratory fluids, including saliva and complex mucus mixtures, but how well influenza viruses survive in such fluids is largely unknown. Here, we find that infectious influenza virus is present in the oral cavity of infected ferrets, suggesting that saliva-containing expulsions can play a role in onward transmission. Additionally, influenza virus in droplets composed of saliva degrades more rapidly than virus within respiratory mucus. Droplet composition impacts the crystalline structure and virus localization in dried droplets. These results suggest that viruses from distinct sites in the respiratory tract could have variable persistence in the environment, which will impact viral transmission fitness.

Machine learning-driven SERS fingerprinting of disintegrated viral components for rapid detection of SARS-CoV-2 in environmental dust.

Surveillance of airborne viruses in crowded indoor spaces is crucial for managing outbreaks, as highlighted by the SARS-CoV-2 pandemic. However, the rapid and on-site detection of fast-mutating viruses, such as SARS-CoV-2, in complex environmental backgrounds remains challenging. Our study introduces a machine learning (ML)-driven surface-enhanced Raman spectroscopy (SERS) approach for detecting viruses within environmental dust matrices. By decomposing intact virions into individual structural components via a Raman-background-free lysis protocol and concentrating them into nanogap SERS hotspots, we significantly enhance the SERS signal intensity and fingerprint information density from viral structural components. Utilizing Principal Component Analysis (PCA), we establish a robust connection between the SERS data of these structural components and their biological sequences, laying a solid foundation for virus detection through SERS. Furthermore, we demonstrate reliable quantitative detection of SARS-CoV-2 using identified SARS-CoV-2 peaks at concentrations down to 102 pfu/ml through Gaussian Process Regression (GPR) and a digital SERS methodology. Finally, applying a Principal Component Analysis-Linear Discriminant Analysis (PCA-LDA) algorithm, we identify SARS-CoV-2, influenza A virus, and Zika virus within an environmental dust background with over 86% accuracy. Therefore, our ML-driven SERS approach holds promise for rapid environmental virus monitoring to manage future outbreaks.

Aerosolized Cyanobacterial Harmful Algal Bloom Toxins: Microcystin Congeners Quantified in the Atmosphere.

Cyanobacterial harmful algal blooms (cHABs) have the potential to adversely affect public health through the production of toxins such as microcystins, which consist of numerous molecularly distinct congeners. Microcystins have been observed in the atmosphere after emission from freshwater lakes, but little is known about the health effects of inhaling microcystins and the factors contributing to microcystin aerosolization. This study quantified total microcystin concentrations in water and aerosol samples collected around Grand Lake St. Marys (GLSM), Ohio. Microcystin concentrations in water samples collected on the same day ranged from 13 to 23 µg/L, dominated by the d-Asp3-MC-RR congener. In particulate matter <2.5 µm (PM2.5), microcystin concentrations up to 156 pg/m3 were detected; the microcystins were composed primarily of d-Asp3-MC-RR, with additional congeners (d-Asp3-MC-HtyR and d-Asp3-MC-LR) observed in a sample collected prior to a storm event. The PM size fraction containing the highest aerosolized MC concentration ranged from 0.44 to 2.5 µm. Analysis of total bacteria by qPCR targeting 16S rDNA revealed concentrations up to 9.4 × 104 gc/m3 in aerosol samples (≤3 µm), while a marker specific to cyanobacteria was not detected in any aerosol samples. Concentrations of aerosolized microcystins varied even when concentrations in water were relatively constant, demonstrating the importance of meteorological conditions (wind speed and direction) and aerosol generation mechanism(s) (wave breaking, spillway, and aeration systems) when evaluating inhalation exposure to microcystins and subsequent impacts on human health.

Stability of Aerosolized SARS-CoV-2 on Masks and Transfer to Skin.

The potential for masks to act as fomites in the transmission of SARS-CoV-2 has been suggested but not demonstrated experimentally or observationally. In this study, we aerosolized a suspension of SARS-CoV-2 in saliva and used a vacuum pump to pull the aerosol through six different types of masks. After 1 h at 28 °C and 80% RH, SARS-CoV-2 infectivity was not detectable on an N95 and surgical mask, was reduced by 0.7 log10 on a nylon/spandex mask, and was unchanged on a polyester mask and two different cotton masks when recovered by elution in a buffer. SARS-CoV-2 RNA remained stable for 1 h on all masks. We pressed artificial skin against the contaminated masks and detected the transfer of viral RNA but no infectious virus to the skin. The potential for masks contaminated with SARS-CoV-2 in aerosols to act as fomites appears to be less than indicated by studies involving SARS-CoV-2 in very large droplets.

Variability in Donor Lung Culture and Relative Humidity Impact the Stability of 2009 Pandemic H1N1 Influenza Virus on Nonporous Surfaces.

Respiratory viruses can be transmitted by multiple modes, including contaminated surfaces, commonly referred to as fomites. Efficient fomite transmission requires that a virus remain infectious on a given surface material over a wide range of environmental conditions, including different relative humidities. Prior work examining the stability of influenza viruses on surfaces has relied upon virus grown in media or eggs, which does not mimic the composition of virus-containing droplets expelled from the human respiratory tract. In this study, we examined the stability of the 2009 pandemic H1N1 (H1N1pdm09) virus on a variety of nonporous surface materials at four different humidities. Importantly, we used virus grown in primary human bronchial epithelial cell (HBE) cultures from different donors to recapitulate the physiological microenvironment of expelled viruses. We observed rapid inactivation of H1N1pdm09 on copper under all experimental conditions. In contrast to copper, viruses were stable on polystyrene plastic, stainless steel, aluminum, and glass, at multiple relative humidities, but greater decay on acrylonitrile butadiene styrene (ABS) plastic was observed at short time points. However, the half-lives of viruses at 23% relative humidity were similar among noncopper surfaces and ranged from 4.5 to 5.9 h. Assessment of H1N1pdm09 longevity on nonporous surfaces revealed that virus persistence was governed more by differences among HBE culture donors than by surface material. Our findings highlight the potential role of an individual's respiratory fluid on viral persistence and could help explain heterogeneity in transmission dynamics. IMPORTANCE Seasonal epidemics and sporadic pandemics of influenza cause a large public health burden. Although influenza viruses disseminate through the environment in respiratory secretions expelled from infected individuals, they can also be transmitted by contaminated surfaces where virus-laden expulsions can be deposited. Understanding virus stability on surfaces within the indoor environment is critical to assessing influenza transmission risk. We found that influenza virus stability is affected by the host respiratory secretion in which the virus is expelled, the surface material on which the droplet lands, and the ambient relative humidity of the environment. Influenza viruses can remain infectious on many common surfaces for prolonged periods, with half-lives of 4.5 to 5.9 h. These data imply that influenza viruses are persistent in indoor environments in biologically relevant matrices. Decontamination and engineering controls should be used to mitigate influenza virus transmission.

A MEMS-enabled portable gas chromatography injection system for trace analysis.

Growing concerns about environmental conditions, public health, and disease diagnostics have led to the rapid development of portable sampling techniques to characterize trace-level volatile organic compounds (VOCs) from various sources. A MEMS-based micropreconcentrator (µPC) is one such approach that drastically reduces the size, weight, and power constraints offering greater sampling flexibility in many applications. However, the adoption of µPCs on a commercial scale is hindered by a lack of thermal desorption units (TDUs) that easily integrate µPCs with gas chromatography (GC) systems equipped with a flame ionization detector (FID) or a mass spectrometer (MS). Here, we report a highly versatile µPC-based, single-stage autosampler-injection unit for traditional, portable, and micro-GCs. The system uses µPCs packaged in 3D-printed swappable cartridges and is based on a highly modular interfacing architecture that allows easy-to-remove, gas-tight fluidic, and detachable electrical connections (FEMI). This study describes the FEMI architecture and demonstrates the FEMI-Autosampler (FEMI-AS) prototype (9.5 cm × 10 cm x 20 cm, ≈500 gms). The system was integrated with GC-FID, and the performance was investigated using synthetic gas samples and ambient air. The results were contrasted with the sorbent tube sampling technique using TD-GC-MS. FEMI-AS could generate sharp injection plugs (≈240 ms) and detect analytes with concentrations <15 ppb within 20 s and <100 ppt within 20 min of sampling time. With more than 30 detected trace-level compounds from ambient air, the demonstrated FEMI-AS, and the FEMI architecture significantly accelerate the adoption of µPCs on a broader scale.

Environmental Stability of Enveloped Viruses Is Impacted by Initial Volume and Evaporation Kinetics of Droplets.

Efficient spread of respiratory viruses requires the virus to maintain infectivity in the environment. Environmental stability of viruses can be influenced by many factors, including temperature and humidity. Our study measured the impact of initial droplet volume (50, 5, and 1 µL) and relative humidity (RH; 40%, 65%, and 85%) on the stability of influenza A virus, bacteriophage Phi6 (a common surrogate for enveloped viruses), and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) under a limited set of conditions. Our data suggest that the drying time required for the droplets to reach quasi-equilibrium (i.e., a plateau in mass) varied with RH and initial droplet volume. The macroscale physical characteristics of the droplets at quasi-equilibrium varied with RH but not with the initial droplet volume. Virus decay rates differed between the wet phase, while the droplets were still evaporating, and the dry phase. For Phi6, decay was faster in the wet phase than in the dry phase under most conditions. For H1N1pdm09, decay rates between the two phases were distinct and initial droplet volume had an effect on virus viability within 2 h. Importantly, we observed differences in virus decay characteristics by droplet size and virus. In general, influenza virus and SARS-CoV-2 decayed similarly, whereas Phi6 decayed more rapidly under certain conditions. Overall, this study suggests that virus decay in media is related to the extent of droplet evaporation, which is controlled by RH. Importantly, accurate assessment of transmission risk requires the use of physiologically relevant droplet volumes and careful consideration of the use of surrogates. IMPORTANCE During the COVID-19 pandemic, policy decisions were being driven by virus stability experiments with SARS-CoV-2 in different droplet volumes under various humidity conditions. Our study, the first of its kind, provides a model for the decay of multiple enveloped RNA viruses in cell culture medium deposited in 50-, 5-, and 1-µL droplets at 40%, 65%, and 85% RH over time. The results of our study indicate that determination of half-lives for emerging pathogens in large droplets may overestimate transmission risk for contaminated surfaces, as observed during the COVID-19 pandemic. Our study implicates the need for the use of physiologically relevant droplet sizes with use of relevant surrogates in addition to what is already known about the importance of physiologically relevant media for risk assessment of future emerging pathogens.

Airborne transmission of respiratory viruses including severe acute respiratory syndrome coronavirus 2.

PURPOSE OF REVIEW: The coronavirus disease 2019 pandemic has had a wide-ranging and profound impact on how we think about the transmission of respiratory viruses This review outlines the basis on which we should consider all respiratory viruses as aerosol-transmissible infections, in order to improve our control of these pathogens in both healthcare and community settings. RECENT FINDINGS: We present recent studies to support the aerosol transmission of severe acute respiratory syndrome coronavirus 2, and some older studies to demonstrate the aerosol transmissibility of other, more familiar seasonal respiratory viruses. SUMMARY: Current knowledge on how these respiratory viruses are transmitted, and the way we control their spread, is changing. We need to embrace these changes to improve the care of patients in hospitals and care homes including others who are vulnerable to severe disease in community settings.

Coronavirus Disease 2019 and Airborne Transmission: Science Rejected, Lives Lost. Can Society Do Better?

This is an account that should be heard of an important struggle: the struggle of a large group of experts who came together at the beginning of the COVID-19 pandemic to warn the world about the risk of airborne transmission and the consequences of ignoring it. We alerted the World Health Organization about the potential significance of the airborne transmission of SARS-CoV-2 and the urgent need to control it, but our concerns were dismissed. Here we describe how this happened and the consequences. We hope that by reporting this story we can raise awareness of the importance of interdisciplinary collaboration and the need to be open to new evidence, and to prevent it from happening again. Acknowledgement of an issue, and the emergence of new evidence related to it, is the first necessary step towards finding effective mitigation solutions.

Associations Between Surface Mining Airsheds and Birth Outcomes in Central Appalachia at Multiple Spatial Scales.

A considerable body of research exists outlining ecological impacts of surface coal mining, but less work has explicitly focused on human health, and few studies have examined potential links between health and surface coal mining at fine spatial scales. In particular, relationships between individual birth outcomes and exposure to air contaminants from coal mining activities has received little attention. Central Appalachia (portions of Virginia, West Virginia, Kentucky, and Tennessee, USA), our study area, has a history of resource extraction, and epidemiologic research notes that the region experiences a greater level of adverse health outcomes compared to the rest of the country that are not fully explained by socioeconomic and behavioral factors. The purpose of this study is to examine associations between surface mining and birth outcomes at four spatial scales: individual, Census tract, county, and across county-sized grid cells. Notably, this study is among the first to examine these associations at the individual scale, providing a more direct measure of exposure and outcome. Airsheds were constructed for surface mines using an atmospheric trajectory model. We then implemented linear (birthweight) and logistic (preterm birth [PTB]) regression models to examine associations between airsheds and birth outcomes, which were geocoded to home address for individual analyses and then aggregated for areal unit analyses, while controlling for a number of demographic variables. This study found that surface mining airsheds are significantly associated with PTB and decreased birthweight at all four spatial scales, suggesting that surface coal mining activities impact birth outcomes via airborne contaminants.

What were the historical reasons for the resistance to recognizing airborne transmission during the COVID-19 pandemic?

The question of whether SARS-CoV-2 is mainly transmitted by droplets or aerosols has been highly controversial. We sought to explain this controversy through a historical analysis of transmission research in other diseases. For most of human history, the dominant paradigm was that many diseases were carried by the air, often over long distances and in a phantasmagorical way. This miasmatic paradigm was challenged in the mid to late 19th century with the rise of germ theory, and as diseases such as cholera, puerperal fever, and malaria were found to actually transmit in other ways. Motivated by his views on the importance of contact/droplet infection, and the resistance he encountered from the remaining influence of miasma theory, prominent public health official Charles Chapin in 1910 helped initiate a successful paradigm shift, deeming airborne transmission most unlikely. This new paradigm became dominant. However, the lack of understanding of aerosols led to systematic errors in the interpretation of research evidence on transmission pathways. For the next five decades, airborne transmission was considered of negligible or minor importance for all major respiratory diseases, until a demonstration of airborne transmission of tuberculosis (which had been mistakenly thought to be transmitted by droplets) in 1962. The contact/droplet paradigm remained dominant, and only a few diseases were widely accepted as airborne before COVID-19: those that were clearly transmitted to people not in the same room. The acceleration of interdisciplinary research inspired by the COVID-19 pandemic has shown that airborne transmission is a major mode of transmission for this disease, and is likely to be significant for many respiratory infectious diseases.

Environmental Stability of Enveloped Viruses is Impacted by the Initial Volume and Evaporation Kinetics of Droplets.

Efficient spread of respiratory viruses requires the virus to maintain infectivity in the environment. Environmental stability of viruses can be influenced by many factors, including temperature and humidity. Our study measured the impact of initial droplet volume (50, 5, and 1 µL) and relative humidity (RH: 40%, 65%, and 85%) on the stability of influenza A virus, bacteriophage, Phi6, a common surrogate for enveloped viruses, and SARS-CoV-2 under a limited set of conditions. Our data suggest that the drying time required for the droplets to reach quasi-equilibrium (i.e. a plateau in mass) varied with RH and initial droplet volume. The macroscale physical characteristics of the droplets at quasi-equilibrium varied with RH but not with initial droplet volume. We observed more rapid virus decay when the droplets were still wet and undergoing evaporation, and slower decay after the droplets had dried. Initial droplet volume had a major effect on virus viability over the first few hours; whereby the decay rate of influenza virus was faster in smaller droplets. In general, influenza virus and SARS-CoV-2 decayed similarly. Overall, this study suggests that virus decay in media is closely correlated with the extent of droplet evaporation, which is controlled by RH. Taken together, these data suggest that decay of different viruses is more similar at higher RH and in smaller droplets and is distinct at lower RH and in larger droplets. Importantly, accurate assessment of transmission risk requires use of physiologically relevant droplet volumes and careful consideration of the use of surrogates. Funding: National Institute of Allergy and Infectious Diseases, National Institute of Neurological Disorders and Stroke, National Institutes of Health; Department of Health and Human Services; Flu Lab. Importance: During the COVID-19 pandemic, policy decisions were being driven by virus stability experiments involving SARS-CoV-2 applied to surfaces in large droplets at various humidity conditions. The results of our study indicate that determination of half-lives for emerging pathogens in large droplets likely over-estimates transmission risk for contaminated surfaces, as occurred during the COVID-19 pandemic. Our study implicates the need for the use of physiologically relevant droplet sizes with use of relevant surrogates in addition to what is already known about the importance of physiologically relevant media for risk assessment of future emerging pathogens.

The challenges in finding your home as a multidisciplinary scientist.

Technological advances in a variety of scientific disciplines are being applied in the life sciences leading to an increase in the number scientists who see themselves or are classed as being multidisciplinary. Although their diverse skills are celebrated and needed to understand the immense complexity of life, being a multidisciplinary researcher can pose unique challenges. We asked multidisciplinary researchers and the director of an institute that fosters multidisciplinary research for their thoughts on what they see as the challenges or obstacles that multidisciplinary scientists can often face.

Critical review of antibiotic resistance genes in the atmosphere.

We conducted a critical review to establish what is known about the sources, characteristics, and dissemination of ARGs in the atmosphere. We identified 52 papers that reported direct measurements of bacterial ARGs in air samples and met other inclusion criteria. The settings of the studies fell into the following categories: urban, rural, hospital, industrial, wastewater treatment plants (WWTPs), composting and landfill sites, and indoor environments. Certain genes were commonly studied and generally abundant: sul1, intI1, ß-lactam ARGs, and tetracycline ARGs. Abundances of total ARGs varied by season and setting, with air in urban areas having higher ARG abundance than rural areas during the summer and vice versa during the winter. There was greater consistency in the types and abundances of ARGs throughout the seasons in urban areas. Human activity within indoor environments was also linked to increased ARG content (abundance, diversity, and concentration) in the air. Several studies found that human exposure to ARGs through inhalation was comparable to exposure through drinking water or ingesting soil. Detection of ARGs in air is a developing field, and differences in sampling and analysis methods reflect the many possible approaches to studying ARGs in air and make direct comparisons between studies difficult. Methodologies need to be standardized to facilitate identification of the dominant ARGs in the air, determine their major sources, and quantify the role of atmospheric transport in dissemination of ARGs in the environment. With such knowledge we can develop better policies and guidelines to limit the spread of antimicrobial resistance.

An exploration of the political, social, economic and cultural factors affecting how different global regions initially reacted to the COVID-19 pandemic.

Responses to the early (February-July 2020) COVID-19 pandemic varied widely, globally. Reasons for this are multiple but likely relate to the healthcare and financial resources then available, and the degree of trust in, and economic support provided by, national governments. Cultural factors also affected how different populations reacted to the various pandemic restrictions, like masking, social distancing and self-isolation or self-quarantine. The degree of compliance with these measures depended on how much individuals valued their needs and liberties over those of their society. Thus, several themes may be relevant when comparing pandemic responses across different regions. East and Southeast Asian populations tended to be more collectivist and self-sacrificing, responding quickly to early signs of the pandemic and readily complied with most restrictions to control its spread. Australasian, Eastern European, Scandinavian, some Middle Eastern, African and South American countries also responded promptly by imposing restrictions of varying severity, due to concerns for their wider society, including for some, the fragility of their healthcare systems. Western European and North American countries, with well-resourced healthcare systems, initially reacted more slowly, partly in an effort to maintain their economies but also to delay imposing pandemic restrictions that limited the personal freedoms of their citizens.