Peri-alkylated terrylenes and ternaphthalenes building-blocks towards multi-edge nanographenes.

Since its first synthesis by Clar in 1948, terrylene - a fully connected ternaphthalene oligomer via naphthalene's peri-positions - has gained special focus within the rylene family, drawing interest for its unique chemical, structural, optoelectronic and single photon emission properties. In this study, we introduce a novel synthetic pathway that enhances the solubility of terrylene derivatives through complete peri-alkylation, while also facilitating extensions at the bay-positions. This approach not only broadens the scope of terrylene's chemical versatility but also opens new avenues for developing solution processable novel multi-edge nanographenes and tailoring electronic energy levels through topological edge structures. Our findings include a comprehensive structural and spectroscopic characterization which include transient absorption spectroscopy and photophysics of both the synthesized peri-alkylated terrylene and its phenylene-fused derivative.

Unveiling the role of linear alkyl organic cations in 2D layered tin halide perovskite field-effect transistors.

Two-dimensional (2D) tin halide perovskites are promising semiconductors for field-effect transistors (FETs) owing to their fascinating electronic properties. However, the correlation between the chemical nature of organic cations and charge carrier transport is still far from understanding. In this study, the influence of chain length of linear alkyl ammonium cations on film morphology, crystallinity, and charge transport in 2D tin halide perovskites is investigated. The carbon chain lengths of the organic spacers vary from propylammonium to heptanammonium. The increase of alkyl chain length leads to enhanced local charge carrier transport in the perovskite film with mobilities of up to 8 cm2 V-1 s-1, as confirmed by optical-pump terahertz spectroscopy. A similar improved macroscopic charge transport is also observed in FETs, only to the chain length of HA, due to the synergistic enhancement of film morphology and molecular organization. While the mobility increases with the temperature rise from 100 K to 200 K due to the thermally activated transport mechanism, the device performance decreases in the temperature range of 200 K to 295 K because of ion migration. These results provide guidelines on rational design principles of organic spacer cations for 2D tin halide perovskites and contribute to other optoelectronic applications.

Absence of lunar phobia in European swarming vespertilionid bats.

"Lunar phobia" in bats has been widely discussed since its description in tropical bats in 1978. The phenomenon has been frequently contested and supported and was first reported in European bats in 2020. Our study seeks to clarify the debate by describing the relationship between the activity of selected swarming vespertilionid bats (Family: Vespertilionidae) and moonlight levels. To verify a potential connection to the latter, a swarming dataset was analysed in respect of estimated moonlight illumination. Moonlight estimates were based on geographical location and several lunar parameters, to accurately characterise the non-linear relationship between moon phase and illumination (lux). The swarming data consisted of 32 netting and 14 echolocation recording sessions collected between August and October 2014 and 2015. Our data included 3,265 netted bats from 13 species and 15,919 bat calls from 10 confirmed species. Data was collected at the large Central European hibernation/swarming site - Natura 2000 PLH080003 "Nietoperek" in western Poland (N 52.394400, E 15.480600). Generalised linear mixed models (GLMMs) determined insignificant relationships between bats and moonlight illumination. Our analysis confirms an absence of impact of moonlight intensity on swarming bats and thereby rejects the lunar phobia phenomena in at least six insectivorous bat species (Myotis myotis, M. daubentonii, M. nattereri, M. bechsteinii, Barbastella barbastellus, Plecotus auritus) swarming in the autumn.

Modification of Two-Dimensional Tin-Based Perovskites by Pentanoic Acid for Improved Performance of Field-Effect Transistors.

Understanding and controlling the nucleation and crystallization in solution-processed perovskite thin films are critical to achieving high in-plane charge carrier transport in field-effect transistors (FETs). This work demonstrates a simple and effective additive engineering strategy using pentanoic acid (PA). Here, PA is introduced to both modulate the crystallization process and improve the charge carrier transport in 2D 2-thiopheneethylammonium tin iodide ((TEA)2 SnI4 ) perovskite FETs. It is revealed that the carboxylic group of PA is strongly coordinated to the spacer cation TEAI and [SnI6 ]4- framework in the perovskite precursor solution, inducing heterogeneous nucleation and lowering undesired oxidation of Sn2+ during the film formation. These factors contribute to a reduced defect density and improved film morphology, including lower surface roughness and larger grain size, resulting in overall enhanced transistor performance. The reduced defect density and decreased ion migration lead to a higher p-channel charge carrier mobility of 0.7 cm2 V-1 s-1 , which is more than a threefold increase compared with the control device. Temperature-dependent charge transport studies demonstrate a mobility of 2.3 cm2 V-1 s-1 at 100 K due to the diminished ion mobility at low temperatures. This result illustrates that the additive strategy bears great potential to realize high-performance Sn-based perovskite FETs.

Symmetry-breaking charge transfer and intersystem crossing in copper phthalocyanine thin films.

Intermolecular interactions in π-stacked chromophores strongly influence their photophysical properties, and thereby also their function in photonic applications. Mixed electronic and vibrational coupling interactions lead to complex potential energy landscapes with competitive photophysical pathways. Here, we characterize the photoexcited dynamics of the small molecule semiconductor copper pthalocyanine (CuPc) in solution and in thin film, the latter comprising two different π-stacked architectures, α-CuPc and ß-CuPc. In solution, CuPc undergoes ultrafast intersytem crossing (ISC) to the triplet excited state. In the solid state, both α-CuPc and ß-CuPc morphologies exhibit a mixing between Frenkel and charge-transfer excitons (Frenkel-CT mixing). We find that this mixing influences the photophysical properties differently, based on morphology. In addition to ISC, α-CuPc demonstrates symmetry-breaking charge transfer, which furthermore depends on excitation wavelength. This mechanism is not observed in ß-CuPc. These results elucidate how molecular organization mediates the balance of competitive photexcited decay mechanisms in organic semiconductors.

Photoinduced Amyloid Fibril Degradation for Controlled Cell Patterning.

Amyloid-like fibrils are a special class of self-assembling peptides that emerge as a promising nanomaterial with rich bioactivity for applications such as cell adhesion and growth. Unlike the extracellular matrix, the intrinsically stable amyloid-like fibrils do not respond nor adapt to stimuli of their natural environment. Here, a self-assembling motif (CKFKFQF), in which a photosensitive o-nitrobenzyl linker (PCL) is inserted, is designed. This peptide (CKFK-PCL-FQF) assembles into amyloid-like fibrils comparable to the unsubstituted CKFKFQF and reveals a strong response to UV-light. After UV irradiation, the secondary structure of the fibrils, fibril morphology, and bioactivity are lost. Thus, coating surfaces with the pre-formed fibrils and exposing them to UV-light through a photomask generate well-defined areas with patterns of intact and destroyed fibrillar morphology. The unexposed, fibril-coated surface areas retain their ability to support cell adhesion in culture, in contrast to the light-exposed regions, where the cell-supportive fibril morphology is destroyed. Consequently, the photoresponsive peptide nanofibrils provide a facile and efficient way of cell patterning, exemplarily demonstrated for A549, Chinese Hamster Ovary, and Raw Dual type cells. This study introduces photoresponsive amyloid-like fibrils as adaptive functional materials to precisely arrange cells on surfaces.

Grain engineering for improved charge carrier transport in two-dimensional lead-free perovskite field-effect transistors.

Controlling crystal growth and reducing the number of grain boundaries are crucial to maximize the charge carrier transport in organic-inorganic perovskite field-effect transistors (FETs). Herein, the crystallization and growth kinetics of a Sn(II)-based 2D perovskite, using 2-thiopheneethylammonium (TEA) as the organic cation spacer, were effectively regulated by the hot-casting method. With increasing crystalline grain size, the local charge carrier mobility is found to increase moderately from 13 cm2 V-1 s-1 to 16 cm2 V-1 s-1, as inferred from terahertz (THz) spectroscopy. In contrast, the FET operation parameters, including mobility, threshold voltage, hysteresis, and subthreshold swing, improve substantially with larger grain size. The optimized 2D (TEA)2SnI4 transistor exhibits hole mobility of up to 0.34 cm2 V-1 s-1 at 295 K and a higher value of 1.8 cm2 V-1 s-1 at 100 K. Our work provides an important insight into the grain engineering of 2D perovskites for high-performance FETs.

Self-Aligned Bilayers for Flexible Free-Standing Organic Field-Effect Transistors.

Free-standing and flexible field-effect transistors based on 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-pentacene)/polystyrene bilayers are obtained by well-controlled phase separation of both components. The phase separation is induced by solvent vapor annealing of initially amorphous blend films, leading to crystallization of TIPS-pentacene as the top layer. The crystallinity and blend morphology strongly depend on the molecular weight of polystyrene, and under optimized conditions, distinct phase separation with a well-defined and trap-free interface between both fractions is achieved. Due to the distinct bilayer morphology, the resulting flexible field-effect transistors reveal similar charge carrier mobilities as rigid devices and additionally pronounced environmental and bias stress stabilities. The performance of the flexible transistors remains stable up to a strain of 1.8%, while above this deformation, a close relation between current and strain is observed that is required for applications in strain sensors.

Predictive modelling of structure formation in semiconductor films produced by meniscus-guided coating.

Meniscus-guided coating methods, such as zone casting, dip coating and solution shearing, are scalable laboratory models for large-area solution coating of functional materials for thin-film electronics. Unfortunately, the general lack of understanding of how the coating parameters affect the dry-film morphology upholds trial-and-error experimentation and delays lab-to-fab translation. We present herein a model that predicts dry-film morphologies produced by meniscus-guided coating of a crystallizing solute. Our model reveals how the interplay between coating velocity and evaporation rate determines the crystalline domain size, shape anisotropy and regularity. If coating is fast, evaporation drives the system quickly past supersaturation, giving isotropic domain structures. If coating is slow, depletion due to crystallization stretches domains in the coating direction. The predicted morphologies have been experimentally confirmed by zone-casting experiments of the organic semiconductor 4-tolyl-bithiophenyl-diketopyrrolopyrrole. Although here we considered a small molecular solute, our model can be applied broadly to polymers and organic-inorganic hybrids such as perovskites.

Switching from Electron to Hole Transport in Solution-Processed Organic Blend Field-Effect Transistors.

Organic electronics became an attractive alternative for practical applications in complementary logic circuits due to the unique features of organic semiconductors such as solution processability and ease of large-area manufacturing. Bulk heterojunctions (BHJ), consisting of a blend of two organic semiconductors of different electronic affinities, allow fabrication of a broad range of devices such as light-emitting transistors, light-emitting diodes, photovoltaics, photodetectors, ambipolar transistors and sensors. In this work, the charge carrier transport of BHJ films in field-effect transistors is switched from electron to hole domination upon processing and post-treatment. Low molecular weight n-type N,N'-bis(n-octyl)-(1,7&1,6)-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDI8-CN2) was blended with p-type poly[2,5-bis(3-tetradecylthiophene-2-yl)thieno[3,2-b]thiophene] (PBTTT-C14) and deposited by spin-coating to form BHJ films. Systematic investigation of the role of rotation speed, solution temperature, and thermal annealing on thin film morphology was performed using atomic force microscopy, scanning electron microscopy, and grazing incidence wide-angle X-ray scattering. It has been determined that upon thermal annealing the BHJ morphology is modified from small interconnected PDI8-CN2 crystals uniformly distributed in the polymer fraction to large planar PDI8-CN2 crystal domains on top of the blend film, leading to the switch from electron to hole transport in field-effect transistors.

Geometry Control of Source/Drain Electrodes in Organic Field-Effect Transistors by Electrohydrodynamic Inkjet Printing.

In this work we study the influence of dielectric surface and process parameters on the geometry and electrical properties of silver electrodes obtained by electrohydrodynamic inkjet printing. The cross-section and thickness of printed silver tracks are optimized to achieve a high conductivity. Silver overprints with cross-section larger than 4 µm2 and thickness larger than 90 nm exhibit the lowest resistivity. To fabricate electrodes in the desired geometry, a sufficient volume of ink is distributed on the surface by applying appropriate voltage amplitude. Single and multilayer overprints are incorporated as bottom contacts in bottom gate organic field-effect transistors (OFETs) with a semiconducting polymer as active layer. The multilayer electrodes result in significantly higher electrical parameters than single layer contacts, confirming the importance of a careful design of the printed tracks for reliable device performance. The results provide important design guidelines for precise fabrication of electrodes in electronic devices by electrohydrodynamic inkjet printing.

5,7,12,14-Tetrafunctionalized 6,13-Diazapentacenes.

The synthesis, property evaluation, and single crystal X-ray structures of four 5,7,12,14-tetrafunctionalized diazapentacenes are presented. The synthesis of these compounds either starts from tetrabromo-N,N-dihydrodiazapentacene or from a diazapentacene tetraketone. Pd-catalyzed coupling or addition of a lithium acetylide gave the precursors that furnish, after further redox reactions, the diazapentacenes as stable crystalline materials. The performance of the tetraphenyl-substituted compound as n-channel semiconductor was evaluated in organic field effect transistors.

Impact of polymorphism on the optoelectronic properties of a low-bandgap semiconducting polymer.

Polymorphism of organic semiconducting materials exerts critical effects on their physical properties such as optical absorption, emission and electrical conductivity, and provides an excellent platform for investigating structure-property relations. It is, however, challenging to efficiently tune the polymorphism of conjugated polymers in aggregated, semi-crystalline phases due to their conformational freedom and anisotropic nature. Here, two distinctly different semi-crystalline polymorphs (ß1 and ß2) of a low-bandgap diketopyrrolopyrrole polymer are formed through controlling the solvent quality, as evidenced by spectroscopic, structural, thermal and charge transport studies. Compared to ß1, the ß2 polymorph exhibits a lower optical band gap, an enhanced photoluminescence, a reduced π-stacking distance, a higher hole mobility in field-effect transistors and improved photocurrent generation in polymer solar cells. The ß1 and ß2 polymorphs provide insights into the control of polymer self-organization for plastic electronics and hold potential for developing programmable ink formulations for next-generation electronic devices.

Pristine Poly( para-phenylene): Relating Semiconducting Behavior to Kinetics of Precursor Conversion.

We investigated unsubstituted poly( para-phenylene) (PPP), a long-desired prototype of a conjugated polymer semiconductor. PPP was accessed via thermal aromatization of a precursor polymer bearing kinked, solubility-inducing dimethoxycyclohexadienylene moieties. IR spectroscopy and Vis ellipsometry studies revealed that the rate of conversion of the precursor to PPP increases with temperature and decreases with film density, indicating a process with high activation volume. The obtained PPP films were analyzed in thin-film transistors to gain insights into the interplay between the degree of conversion and the resulting p-type semiconducting properties. The semiconducting behavior of PPP was further unambiguously proven through IR and transistor measurements of molybdenum trioxide p-doped films.

A Diketopyrrolopyrrole-Based Dimer as a Blue Pigment.

1,4-Diketopyrrolo[3,4-c]pyrroles (DPPs) constitute a class of hydrogen-bonded pigments covering a color range from yellow-orange to dark violet. We report facile dimerization of a Boc-substituted 3,6-dithienyl-DPP. The formed dimer shows brilliantly blue color as a result of the expansion of the chromophore. The soluble dimer acts as latent pigment and is converted to the corresponding pigment either via thermocleavage or acidic deprotection of the Boc groups. The synthesized pigment is characterized by high migrational stability in a polymer matrix and a clear blue color.

Self-Organization and Charge Transport Properties of Selenium and Tellurium Analogues of Polythiophene.

A series of conjugated polymers comprising polythiophene, polyselenophene, and polytellurophene with branched 3,7-dimethyloctyl side chains, well-matched molecular weight, dispersity, and regioregularity is synthesized. The ionization potential is found to vary from 5.14 to 5.32 eV, with polytellurophene having the lowest potential. Field-effect transistors based on these materials exhibit distinct hole transport mobility that varies by nearly three orders of magnitude, with polytellurophene having the highest mobility (2.5 × 10-2 cm² V-1 s-1 ). The large difference in mobility demonstrates the significant impact of heteroatom substitution. Although the series of polymers are very similar in structure, their solid-state properties are different. While the thin film microstructure of polythiophene and polyselenophene is identical, polytellurophene reveals globular features in the film topography. Polytellurophenes also appear to be the least crystalline, even though their charge transport properties are superior to other samples. The torsional barrier and degree of planarity between repeat units increase as one moves down group-16 elements. These studies show how a single atom in a polymer chain can have a substantial influence on the bulk properties of a material, and that heavy group-16 atoms have a positive influence on charge transport properties when all other variables are kept unchanged.