Proposal of Combined Noise and Hand-Arm Vibration Index for Occupational Exposure: Application to a Study Case in the Olive Sector.

In many production and industrial sectors, workers are exposed to noise and hand-arm vibrations (HAV). European directives have established the maximum limit values or exposure action values for noise and vibration independently. However, in many cases, workers who endure hand-arm vibration also receive high noise levels. This research suggests a procedure to aid the establishment of precautionary measures for workers with simultaneous exposure to both physical agents. This procedure defines a combined index based on the energy doses for both noise and HAV. From this combined index, the suggested methodology allows a recommended exposure time for workers with simultaneous noise and HAV exposure to be calculated. This methodology can be adapted to tackle the relative importance assigned to both agents according to the safety manager and new knowledge on combined health effects. To test this method, a measurement campaign under real working conditions was conducted with workers from the olive fruit-harvesting sector, where a variety of hand-held machinery is used. The results of the study case show that the suggested procedure can obtain reliable exposure time recommendations for simultaneous noise and HAV exposures and is therefore a useful tool for establishing prevention measures.

Reopening higher education buildings in post-epidemic COVID-19 scenario: monitoring and assessment of indoor environmental quality after implementing ventilation protocols in Spain and Portugal.

Post-epidemic protocols have been implemented in public buildings to keep indoor environments safe. However, indoor environmental conditions are affected by this decision, which also affect the occupants of buildings. This fact has major implications in educational buildings, where the satisfaction and learning performance of students may also be affected. This study investigates the impact of post-epidemic protocols on indoor environmental conditions in higher education buildings of one Portuguese and one Spanish university. A sensor monitoring campaign combined with a simultaneous questionnaire was conducted during the reopening of the educational buildings. Results showed that although renewal air protocols were effective and the mean CO2 concentration levels remained low (742 ppm and 519 ppm in Portugal and Spain universities, respectively), students were dissatisfied with the current indoor environmental conditions. Significant differences were also found between the responses of Portuguese and Spanish students. Indeed, Spanish students showed warmer preferences (thermal neutrality = 23.3℃) than Portuguese students (thermal neutrality = 20.7℃). In terms of involved indoor factors, the obtained data showed significant correlations (p < 0.001) between acoustic factors and overall satisfaction in the Portuguese students (ρ = 0.540) and between thermal factors and overall satisfaction in the Spanish students (ρ = 0.522). Therefore, indoor environmental conditions should be improved by keeping spaces safe while minimizing the impact of post-epidemic protocols on student learning performance.

An analysis of occupational accidents involving national and international construction workers in Spain using the association rule technique.

Worker safety awareness on construction sites is a major concern due to the hazardous work conditions. Additionally, globalization is increasing the cultural diversity of the workforce and this influences workers' attitudes, beliefs and behaviour. The growing number of migrant workers in this sector has become a distinctive feature of the industry's labour market. The objective of this article is to analyse occupational accidents that occurred on Spanish construction sites while taking into consideration the nationality of the workers. Due to the large number of accidents and attributes associated with them, the use of association rules is proposed. Overall, results evince similar behaviour, although interesting differences can be observed regarding the occupation of workers. In addition, the results are in accordance with previous studies carried out in other countries. The analysis of these accidents will serve to establish initiatives that provide safer work environments.

Analysis of Impact of Natural Ventilation Strategies in Ventilation Rates and Indoor Environmental Acoustics Using Sensor Measurement Data in Educational Buildings.

Indoor environmental conditions can significantly affect occupants' health and comfort. These conditions are especially important in educational buildings, where students, teachers and staff spend long periods of the day and are vulnerable to these factors. Recently, indoor air quality has been a focus of attention to ensure that disease transmission in these spaces is minimised. In order to increase the knowledge in this field, experimental tests have been carried out to characterise the impact of natural ventilation strategies on indoor air quality and the acoustic environment. This study has evaluated three ventilation scenarios in four different classrooms in buildings of the University of Granada, considering different window and door opening configurations. Ventilation rates were estimated using the CO2 Decay Method, and background noise recordings were made in each classroom for acoustic tests. Results show that specific natural ventilation strategies have a relevant impact that is worth considering on the background noise in indoor spaces. In this sense ventilation rates provided by the different configurations varied between 3.7 and 39.8 air changes per hour (ACH) and the acoustic tests show a background noise ranging from 43 to 54 dBA in these scenarios. Consequently, managers and teachers should take into account not only the ACH, but also other collateral impacts on the indoor environmental conditions such as the thermal comfort or the acoustic environment.

Management of Occupational Risk Prevention of Nanomaterials Manufactured in Construction Sites in the EU.

Currently, nanotechnology plays a key role for technological innovation, including the construction sector. An exponential increase is expected in its application, although this has been hampered by the current degree of uncertainty regarding the potential effects of nanomaterials on both human health and the environment. The accidents, illnesses, and disease related to the use of nanoproducts in the construction sector are difficult to identify. For this purpose, this work analyzes in depth the products included in recognized inventories and the safety data sheets of these construction products. Based on this analysis, a review of the recommendations on the use of manufactured nanomaterials at construction sites is performed. Finally, a protocol is proposed with the aim of it serving as a tool for technicians in decision-making management at construction sites related to the use of manufactured nanomaterials. This proposed protocol should be an adaptive and flexible tool while the manufactured nanomaterials-based work continues to be considered as an "emerging risk," despite the expectation that the protocol will be useful for the development of new laws and recommendations for occupational risk prevention management.

The impact of occupational health and safety regulations on prevention through design in construction projects: Perspectives from Spain and the United Kingdom.

BACKGROUND: Since the mid-1990 s, Prevention through Design (PtD) has become increasingly prevalent in the built environment. The acceptance of PtD has largely been due to the removal or reduction of risks during the execution phase of construction projects. European States have had the added impetus of national legislation. OBJECTIVE: This paper analyzes the influence of European Union Directive 92/57/EEC on occupational safety and health injury prevention in the project design phase. METHODS: Qualitative methods comprised individual semi-structured interviews and focus groups with a panel of experts. Sixty individuals from construction and related professions (architects, engineers, constructors, developers, and other construction experts) answered 17 key questions to establish national perceptions of the effectiveness of Directive 92/57/EEC in Spain and the United Kingdom (UK). RESULTS: The implementation of PtD in the project design phase in the UK is clearer since the regulations explicitly state the obligations of project designers as well as those of the coordinator. Interviews with Spanish experts show that, in Spain, the prevention culture is less frequently realized. CONCLUSIONS: The most significant differences between the European Directive and national regulations which influence PtD are linked to the Health and Safety Coordinator, and Health and Safety documents.