Cloning, expression, purification, crystallization and preliminary X-ray characterization of allantoinase from Bacillus licheniformis ATCC 14580.

Allantoinase, a member of the amidohydrolase superfamily, exists in a wide variety of organisms, including bacteria, fungi, plants and a few animals, such as fishes and amphibians. Allantoinase catalyzes the reversible hydrolysis of allantoin into allantoate by hydrolytic cleavage of the N1-C2 amide bond of the five-membered hydantoin ring. Allantoinase from Bacillus licheniformis (AllBali) presents an inverted enantioselectivity towards allantoin (R-enantioselective), which is a distinguishable feature that is not observed for other allantoinases. In this work, B. licheniformis ATCC 14580 allantoinase (AllBali) containing a C-terminal His6 tag was overproduced in Escherichia coli and purified to homogeneity. Crystals of AllBali were obtained by the vapour-diffusion method using 0.1 M potassium thiocyanate, 20%(w/v) polyethylene glycol 3350 as a crystallization solution. X-ray diffraction data were collected to a resolution of 3.5 Šwith an Rmerge of 29.2% from a crystal belonging to space group P1211, with unit-cell parameters a=54.93, b=164.74, c=106.89 Å, ß=98.49°. There are four molecules in the asymmetric unit with a solvent content of 47% as estimated from the Matthews coefficient (VM=2.34 Å3 Da(-1)).

Biochemical and mutational studies of allantoinase from Bacillus licheniformis CECT 20T.

Allantoinases (allantoin amidohydrolase, E.C. 3.5.2.5) catalyze the hydrolysis of the amide bond of allantoin to form allantoic acid, in those organisms where allantoin is not the final product of uric acid degradation. Despite their importance in the purine catabolic pathway, sequences of microbial allantoinases with proven activity are scarce, and only the enzyme from Escherichia coli (AllEco) has been studied in detail in the genomic era. In this work, we report the cloning, purification and characterization of the recombinant allantoinase from Bacillus licheniformis CECT 20T (AllBali). The enzyme was a homotetramer with an apparent Tm of 62 ± 1 °C. Optimal parameters for the enzyme activity were pH 7.5 and 50 °C, showing apparent Km and kcat values of 17.7 ± 2.7 mM and 24.4 ± 1.5 s(-1), respectively. Co(2+) proved to be the most effective cofactor, inverting the enantioselectivity of AllBali when compared to that previously reported for other allantoinases. The common ability of different cyclic amidohydrolases to hydrolyze distinct substrates to the natural one also proved true for AllBali. The enzyme was able to hydrolyze hydantoin, dihydrouracil and 5-ethyl-hydantoin, although at relative rates 3-4 orders of magnitude lower than with allantoin. Mutagenesis experiments suggest that S292 is likely implicated in the binding of the allantoin ring through the carbonyl group of the polypeptide main chain, which is the common mechanism observed in other members of the amidohydrolase family. In addition, our results suggest an allosteric effect of H2O2 toward allantoinase.

The isolated N terminus of Ring1B is a well-folded, monomeric fragment with native-like structure.

The Polycomb group (PcG) proteins assemble into Polycomb repressive complexes (PRCs), PRC1 and PRC2, which act as general transcriptional repressors. PRC1 comprises a variety of biochemical entities endowed with histone H2A monoubiquitylation activity conferred by really interesting new gene (RING) finger E3 ubiquitin ligases Ring1A and Ring1B. All PRC1 complexes contain Ring1 proteins which are essential for Polycomb epigenetic regulation. We have been able to express the isolated N-terminal region of Ring1B, N-Ring1B, comprising the first 221 residues of the 334-residue-long Ring1B. This fragment contains the 41-residue-long RING finger motif, and flanking sequences that form an interacting platform for PcG and non-PcG proteins. We found that the N-Ring1B is a well-folded, monomeric fragment, with native-like structure which unfolds irreversibly. The protein is capable of binding to an ubiquitin-conjugase protein (with an 85% of sequence similarity to the Ring1B physiological partner) with moderate affinity.

Stability and binding of the phosphorylated species of the N-terminal domain of enzyme I and the histidine phosphocarrier protein from the Streptomyces coelicolor phosphoenolpyruvate:sugar phosphotransferase system.

The phosphotransferase system (PTS) is involved in the use of carbon sources in bacteria. It is formed by two general proteins: enzyme I (EI) and the histidine phosphocarrier (HPr), and various sugar-specific permeases. EI is formed by two domains, with the N-terminal domain (EIN) being responsible for the binding to HPr. In low-G+C Gram-positive bacteria, HPr becomes phosphorylated not only by phosphoenolpyruvate (PEP) at the active-site histidine, but also by ATP at a serine. In this work, we have characterized: (i) the stability and binding affinities between the active-site-histidine phosphorylated species of HPr and the EIN from Streptomyces coelicolor; and (ii) the stability and binding affinities of the species involving the phosphorylation at the regulatory serine of HPr(sc). Our results show that the phosphorylated active-site species of both proteins are less stable than the unphosphorylated counterparts. Conversely, the Hpr-S47D, which mimics phosphorylation at the regulatory serine, is more stable than wild-type HPr(sc) due to helical N-capping effects, as suggested by the modeled structure of the protein. Binding among the phosphorylated and unphosphorylated species is always entropically driven, but the affinity and the enthalpy vary widely.

Biochemical and mutational studies of the Bacillus cereus CECT 5050T formamidase support the existence of a C-E-E-K tetrad in several members of the nitrilase superfamily.

Formamidases (EC 3.5.1.49) are poorly characterized proteins. In spite of this scarce knowledge, ammonia has been described as playing a central role in the pathogenesis of human pathogens such as Helicobacter pylori, for which formamidase has been shown to participate in the nitrogen metabolic pathway. Sequence analysis has revealed that at least two different groups of formamidases are classified as EC 3.5.1.49: on the one hand, the derivatives of the FmdA-AmdA superfamily, which are the best studied to date, and on the other hand, the derivatives of Helicobacter pylori AmiF. Here we present the cloning, purification, and characterization of a recombinant formamidase from Bacillus cereus CECT 5050T (BceAmiF), the second member of the AmiF subfamily to be characterized, showing new features of the enzyme further supporting its relationship with aliphatic amidases. We also present homology modeling-based mutational studies confirming the importance of the Glu140 and Tyr191 residues in the enzymatic activities of the AmiF family. Moreover, we can conclude that a second glutamate residue is critical in several members of the nitrilase superfamily, meaning that what has consistently been identified as a C-E-K triad is in fact a C-E-E-K tetrad.

The conformational stability and biophysical properties of the eukaryotic thioredoxins of Pisum sativum are not family-conserved.

Thioredoxins (TRXs) are ubiquitous proteins involved in redox processes. About forty genes encode TRX or TRX-related proteins in plants, grouped in different families according to their subcellular localization. For instance, the h-type TRXs are located in cytoplasm or mitochondria, whereas f-type TRXs have a plastidial origin, although both types of proteins have an eukaryotic origin as opposed to other TRXs. Herein, we study the conformational and the biophysical features of TRXh1, TRXh2 and TRXf from Pisum sativum. The modelled structures of the three proteins show the well-known TRX fold. While sharing similar pH-denaturations features, the chemical and thermal stabilities are different, being PsTRXh1 (Pisum sativum thioredoxin h1) the most stable isoform; moreover, the three proteins follow a three-state denaturation model, during the chemical-denaturations. These differences in the thermal- and chemical-denaturations result from changes, in a broad sense, of the several ASAs (accessible surface areas) of the proteins. Thus, although a strong relationship can be found between the primary amino acid sequence and the structure among TRXs, that between the residue sequence and the conformational stability and biophysical properties is not. We discuss how these differences in the biophysical properties of TRXs determine their unique functions in pea, and we show how residues involved in the biophysical features described (pH-titrations, dimerizations and chemical-denaturations) belong to regions involved in interaction with other proteins. Our results suggest that the sequence demands of protein-protein function are relatively rigid, with different protein-binding pockets (some in common) for each of the three proteins, but the demands of structure and conformational stability per se (as long as there is a maintained core), are less so.

Evaluation of substrate promiscuity of an L-carbamoyl amino acid amidohydrolase from Geobacillus stearothermophilus CECT43.

N-carbamoyl-amino-acid amidohydrolase (also known as N-carbamoylase) is the stereospecific enzyme responsible for the chirality of the D- or L-amino acid obtained in the "Hydantoinase Process." This process is based on the dynamic kinetic resolution of D,L-5-monosubstituted hydantoins. In this work, we have demonstrated the capability of a recombinant L-N-carbamoylase from the thermophilic bacterium Geobacillus stearothermophilus CECT43 (BsLcar) to hydrolyze N-acetyl and N-formyl-L-amino acids as well as the known N-carbamoyl-L-amino acids, thus proving its substrate promiscuity. BsLcar showed faster hydrolysis for N-formyl-L-amino acids than for N-carbamoyl and N-acetyl-L-derivatives, with a catalytic efficiency (k(cat)/K(m)) of 8.58 x 10(5), 1.83 x 10(4), and 1.78 x 10(3) (s(-1) M(-1)), respectively, for the three precursors of L-methionine. Optimum reaction conditions for BsLcar, using the three N-substituted-L-methionine substrates, were 65 degrees C and pH 7.5. In all three cases, the metal ions Co(2+), Mn(2+), and Ni(2+) greatly enhanced BsLcar activity, whereas metal-chelating agents inhibited it, showing that BsLcar is a metalloenzyme. The Co(2+)-dependent activity profile of the enzyme showed no detectable inhibition at high metal ion concentrations.

Natural occurrence and industrial applications of D-amino acids: an overview.

Interest in D-amino acids has increased in recent decades with the development of new analytical methods highlighting their presence in all kingdoms of life. Their involvement in physiological functions, and the presence of metabolic routes for their synthesis and degradation have been shown. Furthermore, D-amino acids are gaining considerable importance in the pharmaceutical industry. The immense amount of information scattered throughout the literature makes it difficult to achieve a general overview of their applications. This review summarizes the state-of-the-art on D-amino acid applications and occurrence, providing both established and neophyte researchers with a comprehensive introduction to this topic.

Carbamoylases: characteristics and applications in biotechnological processes.

Enzymatic kinetic resolution is a widely used biotechnological tool for the production of enantiomerically pure/enriched compounds. This technique takes advantage of the enantioselectivity or enantiospecificity of an enzyme for one of the enantiomers of a racemic substrate to isolate the desired isomer. N-Carbamoyl-D- and L-amino acid amidohydrolases (D- and L-carbamoylases) are model enzymes for this procedure due to their strict enantiospecificity. Carbamoylase-based kinetic resolution of amino acids has been applied for the last three decades, allowing the production of optically pure D- or L-amino acids. Furthermore, this enzyme has become crucial in the industrially used multienzymatic system known as "Hydantoinase Process," where the kinetic resolution produced by coupling an enantioselective hydantoinase and the enantiospecific carbamoylase is enhanced by the enzymatic/chemical dynamic kinetic resolution of the low-rate hydrolyzed substrate. This review outlines the properties of D- and L-carbamoylases, emphasizing their biochemical/structural characteristics and their biotechnological applications. It also pinpoints new applications for the exploitation of carbamoylases over the forthcoming years.

Structure of dihydropyrimidinase from Sinorhizobium meliloti CECT4114: new features in an amidohydrolase family member.

The recombinant dihydropyrimidinase from Sinorhizobium meliloti CECT4114 (SmelDhp) has been characterised and its crystal structure elucidated at 1.85A. The global architecture of the protein is reminiscent of that of the amidohydrolase superfamily, consisting of two domains; an (alpha/beta)(8) TIM-like barrel domain, where the catalytic centre is located, and a smaller beta-sheet sandwich domain of unknown function. The c-terminal tails of each subunit extend toward another monomer in a swapping-like manner, creating a hydrogen bond network which suggests its implication in protein oligomerisation. Mutational and structural evidence suggest the involvement of a conserved tyrosine in the reaction mechanism of the enzyme. SmelDhp presents both hydantoinase and dihydropyrimidinase activities, with higher affinity for the natural six-membered ring substrates. For the five-membered ring substrates, affinity was greater for those with aliphatic and apolar groups in the 5th carbon atom, with the highest rates of hydrolysis for d-5-methyl and d-5-ethyl hydantoin (k(cat)/K(m)=2736+/-380 and 944+/-52M(-1)s(-1), respectively). The optimal conditions for the enzyme activity were found to be 60 degrees C of temperature at pH 8.0. SmelDhp retains 95% of its activity after 6-hour preincubation at 60 degrees C. This is the first dihydropyrimidinase used for the hydrolytic opening of non-natural 6-monosubstituted dihydrouracils, which may be exploited for the production of beta-amino acids.

Potential application of N-carbamoyl-beta-alanine amidohydrolase from Agrobacterium tumefaciens C58 for beta-amino acid production.

An N-carbamoyl-beta-alanine amidohydrolase of industrial interest from Agrobacterium tumefaciens C58 (beta car(At)) has been characterized. Beta car(At) is most active at 30 degrees C and pH 8.0 with N-carbamoyl-beta-alanine as a substrate. The purified enzyme is completely inactivated by the metal-chelating agent 8-hydroxyquinoline-5-sulfonic acid (HQSA), and activity is restored by the addition of divalent metal ions, such as Mn(2+), Ni(2+), and Co(2+). The native enzyme is a homodimer with a molecular mass of 90 kDa from pH 5.5 to 9.0. The enzyme has a broad substrate spectrum and hydrolyzes nonsubstituted N-carbamoyl-alpha-, -beta-, -gamma-, and -delta-amino acids, with the greatest catalytic efficiency for N-carbamoyl-beta-alanine. Beta car(At) also recognizes substrate analogues substituted with sulfonic and phosphonic acid groups to produce the beta-amino acids taurine and ciliatine, respectively. Beta car(At) is able to produce monosubstituted beta(2)- and beta(3)-amino acids, showing better catalytic efficiency (k(cat)/K(m)) for the production of the former. For both types of monosubstituted substrates, the enzyme hydrolyzes N-carbamoyl-beta-amino acids with a short aliphatic side chain better than those with aromatic rings. These properties make beta car(At) an outstanding candidate for application in the biotechnology industry.

Recombinant polycistronic structure of hydantoinase process genes in Escherichia coli for the production of optically pure D-amino acids.

Two recombinant reaction systems for the production of optically pure D-amino acids from different D,L-5-monosubstituted hydantoins were constructed. Each system contained three enzymes, two of which were D-hydantoinase and D-carbamoylase from Agrobacterium tumefaciens BQL9. The third enzyme was hydantoin racemase 1 for the first system and hydantoin racemase 2 for the second system, both from A. tumefaciens C58. Each system was formed by using a recombinant Escherichia coli strain with one plasmid harboring three genes coexpressed with one promoter in a polycistronic structure. The D-carbamoylase gene was cloned closest to the promoter in order to obtain the highest level of synthesis of the enzyme, thus avoiding intermediate accumulation, which decreases the reaction rate. Both systems were able to produce 100% conversion and 100% optically pure D-methionine, D-leucine, D-norleucine, D-norvaline, D-aminobutyric acid, D-valine, D-phenylalanine, D-tyrosine, and D-tryptophan from the corresponding hydantoin racemic mixture. For the production of almost all D-amino acids studied in this work, system 1 hydrolyzed the 5-monosubstituted hydantoins faster than system 2.