Removal of aqueous chromium and environmental CO2 by using photocatalytic TiO2 doped with tungsten.

Removal of hexavalent chromium was accomplished by using photocatalyst materials of TiO2 doped with tungsten oxide, environmental air as oxygen supply and white light as irradiation source. Dichromate anions in concentration ranges of 50 to 1000 µg/L were removed by means of aqueous dispersions of TiO2 doped with tungsten. The aqueous chromium analyses were performed by Differential Pulse Voltammetry technique. Additionally, mineralization of CO2 gas was promoted by the photocatalysis process, as was clearly shown by Raman spectroscopy and X-ray Photoelectron Spectroscopy (XPS) analyses obtained from the TiO2 samples recovered after photocatalytic experiments. Results of sample analyses by Scanning Electron Microscopy (SEM) and High Resolution Transmission Electron Microscopy (HRTEM) are presented and discussed.

Morphological and micromechanical characterization of calcium oxalate (CaOx) crystals embedded in the pecan nutshell (Carya illinoinensis).

The morphology and micromechanical properties of the mineral crystals embedded in the pecan nutshell (Carya illinoinensis) were characterized. Qualitative and quantitative morphological analyses carried out revealed that the crystals were comprised of calcium oxalate (CaOx) and have a wide range of sizes, with prismatic shapes, distributed heterogeneously in the sclerenchyma tissue. From indentation tests, it was found that CaOx crystals are stiffer structures compared to stone cells (sclerenchyma tissue), showing hardness and elastic modulus values of 0.53 ±â€¯0.19 GPa and 9.4 ±â€¯1.80 GPa, respectively. Additionally, the values of fracture toughness (0.08 ±â€¯0.02 MPa m0.5) and the brittleness index (9336 m-0.5) revealed that these types of structures are extremely brittle. The results obtained suggest that the main function of the CaOx crystals is to provide structural support to tissue. The presented methodology demonstrates the potential of the instrumented indentation technique (IIT) for in situ micromechanical characterization of mineral crystals located in plant tissues.

Magneto-conductivity and magnetically-controlled nonlinear optical transmittance in multi-wall carbon nanotubes.

The impact of vectorial magnetic field effects on electrical conductivity and nonlinear optical transmittance exhibited by multi-wall carbon nanotubes was studied. The samples were synthetized by an aerosol pyrolysis processing route in a thin film form. Optical signals in a two-wave mixing configuration allowed us to identify two orthogonal directions of propagation for a magnetic field travelling through the nanomaterials studied. A selective modification in optical absorption was considered to be induced by magnetic perturbations in the sample. Standard optical Kerr gate measurements were carried out for exploring the third order nonlinear optical behavior of the film. A capacitive effect influenced by optical and magnetic excitations was distinguished to be characteristic of the sample. Magneto-quantum conductivity sensitive to the direction of an external magnetic field interacting with the tubes was analyzed. Magnetically-induced changes in electronic band parameters seem to be the main responsible for the optical and electrical modulation observed in the nanostructures. Immediate applications for developing magneto-optical and magneto-electrical functions can be contemplated.

Nonlocal nonlinear refractive index of gold nanoparticles synthesized by ascorbic acid reduction: comparison of fitting models.

In this paper, the nonlinear refractive index of colloidal gold nanoparticles under continuous wave illumination is investigated with the z-scan technique. Gold nanoparticles were synthesized using ascorbic acid as reductant, phosphates as stabilizer and cetyltrimethylammonium chloride (CTAC) as surfactant agent. The nanoparticle size was controlled with the CTAC concentration. Experiments changing incident power and sample concentration were done. The experimental z-scan results were fitted with three models: thermal lens, aberrant thermal lens and the nonlocal model. It is shown that the nonlocal model reproduces with exceptionally good agreement; the obtained experimental behaviour.

Optoelectronic modulation by multi-wall carbon nanotubes.

We report the observation of photoconduction and a strong nonlinear optical absorptive response exhibited by multi-wall carbon nanotubes. An aerosol pyrolysis method was employed for the preparation of the samples. Measurements of the optical transmittance with 7 ns pulses at 1064 nm wavelength allowed us to identify a two-photon absorption effect as the main mechanism of third-order nonlinearity. Photoconductive experiments at 445 nm wavelength seem to confirm the possibility for generating non-resonant multi-photonic absorption processes in the multi-wall carbon nanotubes. By the optical control of the conductivity in the nanotubes, we implement an optoelectronic amplitude modulator device with potential applications for sharp selective functionalities.