Accurate prediction of the optical properties of nanoalloys with both plasmonic and magnetic elements.

The alloying process plays a pivotal role in the development of advanced multifunctional plasmonic materials within the realm of modern nanotechnology. However, accurate in silico predictions are only available for metal clusters of just a few nanometers, while the support of modelling is required to navigate the broad landscape of components, structures and stoichiometry of plasmonic nanoalloys regardless of their size. Here we report on the accurate calculation and conceptual understanding of the optical properties of metastable alloys of both plasmonic (Au) and magnetic (Co) elements obtained through a tailored laser synthesis procedure. The model is based on the density functional theory calculation of the dielectric function with the Hubbard-corrected local density approximation, the correction for intrinsic size effects and use of classical electrodynamics. This approach is built to manage critical aspects in modelling of real samples, as spin polarization effects due to magnetic elements, short-range order variability, and size heterogeneity. The method provides accurate results also for other magnetic-plasmonic (Au-Fe) and typical plasmonic (Au-Ag) nanoalloys, thus being available for the investigation of several other nanomaterials waiting for assessment and exploitation in fundamental sectors such as quantum optics, magneto-optics, magneto-plasmonics, metamaterials, chiral catalysis and plasmon-enhanced catalysis.

Effect of Carbonate Source on the Dehydrofluorination Process in Polyvinylidene Fluoride/Alkali Metal Carbonate Composites.

In this paper, Raman and X-ray photoelectron spectroscopies were applied to analyze compositional and structural variations of the generated activated carbon (AC), as induced by changing carbonate source in three different types of systems, PVDF/M2CO3 (M = Li, Na, and K). According to the variations of I D/I G and sp2/sp3 ratios, a strong dependence of the AC structure on the type and content of the initial carbonate was found, determined by practical dehydrofluorination reactions associated with oxygen incorporation in AC and side reactions, because of the property variation induced by the difference in the cation of the carbonate sources. This procedure clarified the process of PVDF dehydrofluorination and the formation of activated carbon, which helps to optimize the material performance of the percolative composite for flexible energy storage applications.

Optical Hydrogen Sensing Properties of e-Beam WO3 Films Decorated with Gold Nanoparticles.

Tungsten oxide thin films with different thicknesses, crystallinity and morphology were synthesized by e-beam deposition followed by thermal treatment and acid boiling. The films with different surface morphologies were coated with gold nanoparticles and tested as optical sensing materials towards hydrogen. X-ray diffraction, scanning electron microscopy, ellipsometry and UV-VIS spectroscopy were employed to characterize the structural, morphological and optical properties of the film. We demonstrated a good response towards hydrogen in air, reaching a good selectivity among other common reducing gases, such as ammonia and carbon monoxide. The sensitivity has been proven to be highly dependent on the thickness and crystallinity of the samples.

Enhancing Tungsten Oxide Gasochromism with Noble Metal Nanoparticles: The Importance of the Interface.

Crystalline tungsten trioxide (WO3 ) thin films covered by noble metal (gold and platinum) nanoparticles are synthesized via wet chemistry and used as optical sensors for gaseous hydrogen. Sensing performances are strongly influenced by the catalyst used, with platinum (Pt) resulting as best. Surprisingly, it is found that gold (Au) can provide remarkable sensing activity that tuned out to be strongly dependent on the nanoparticle size: devices sensitized with smaller nanoparticles display better H2 sensing performance. Computational insight based on density functional theory calculations suggested that this can be related to processes occurring specifically at the Au nanoparticle-WO3 interface (whose extent is in fact dependent on the nanoparticle size), where the hydrogen dissociative adsorption turns out to be possible. While both experiments and calculations single out Pt as better than Au for sensing, the present work reveals how an exquisitely nanoscopic effect can yield unexpected sensing performance for Au on WO3 , and how these performances can be tuned by controlling the nanoscale features of the system.

Effects of Solvent and Electrospinning Parameters on the Morphology and Piezoelectric Properties of PVDF Nanofibrous Membrane.

PVDF electrospun membranes were prepared by employing different mixtures of solvents and diverse electrospinning parameters. A comprehensive investigation was carried out, including morphology, nanofiber diameter, crystallinity, ß-phase fraction, and piezoelectric response under external mechanical strain. It was demonstrated that by using low-toxicity DMSO as the solvent, PVDF membranes with good morphology (bead-free, smooth surface, and uniform nanofiber) can be obtained. All the fabricated membranes showed crystallinity and ß-phase fraction above 48% and 80%, respectively; therefore, electrospinning is a good method for preparing PVDF membranes with the piezoelectric properties. Moreover, we considered a potential effect of the solvent properties and the electrospinning parameters on the final piezoelectric properties. When PVDF membranes with different ß-phase fractions and crystallinity values are applied to make the piezoelectric transducers, various piezoelectric voltage outputs can be obtained. This paper provides an effective and efficient strategy for regulating the piezoelectric properties of PVDF electrospun membranes by controlling both solvent dipole moment and process parameters. To the best of our knowledge, this is the first time that the influence of a solvent's dipole moment on the piezoelectric properties of electrospun materials has been reported.

Artificial photosynthesis: photoanodes based on polyquinoid dyes onto mesoporous tin oxide surface.

Dye-sensitized photoelectrochemical cells represent an appealing solution for artificial photosynthesis, aimed at the conversion of solar light into fuels or commodity chemicals. Extensive efforts have been directed towards the development of photoelectrodes combining semiconductor materials and organic dyes; the use of molecular components allows to tune the absorption and redox properties of the material. Recently, we have reported the use of a class of pentacyclic quinoid organic dyes (KuQuinone) chemisorbed onto semiconducting tin oxide as photoanodes for water oxidation. In this work, we investigate the effect of the SnO2 semiconductor thickness and morphology and of the dye-anchoring group on the photoelectrochemical performance of the electrodes. The optimized materials are mesoporous SnO2 layers with 2.5 µm film thickness combined with a KuQuinone dye with a 3-carboxylpropyl-anchoring chain: these electrodes achieve light-harvesting efficiency of 93% at the maximum absorption wavelength of 533 nm, and photocurrent density J up to 350 µA/cm2 in the photoelectrochemical oxidation of ascorbate, although with a limited incident photon-to-current efficiency of 0.075%. Calculations based on the density functional theory (DFT) support the role of the reduced species of the KuQuinone dye via a proton-coupled electron transfer as the competent species involved in the electron transfer to the tin oxide semiconductor. Finally, a preliminary investigation of the photoelectrodes towards benzyl alcohol oxidation is presented, achieving photocurrent density up to 90 µA/cm2 in acetonitrile in the presence of N-hydroxysuccinimide and pyridine as redox mediator and base, respectively. These results support the possibility of using molecular-based materials in synthetic photoelectrochemistry.

SILAR Deposition of Metal Oxide Nanostructured Films.

Methods for the fabrication of thin films with well controlled structure and properties are of great importance for the development of functional devices for a large range of applications. SILAR, the acronym for Successive Ionic Layer Adsorption and Reaction, is an evolution and combination of two other deposition methods, the Atomic Layer Deposition and Chemical Bath Deposition. Due to a relative simplicity and low cost, this method has gained increasing interest in the scientific community. There are, however, several aspects related to the influence of the many parameters involved, which deserve further deepening. In this review article, the basis of the method, its application to the fabrication of thin films, the importance of experimental parameters, and some recent advances in the application of oxide films are reviewed. At first the fundamental theoretical bases and experimental concepts of SILAR are discussed. Then, the fabrication of chalcogenides and metal oxides is reviewed, with special emphasis to metal oxides, trying to extract general information on the effect of experimental parameters on structural, morphological and functional properties. Finally, recent advances in the application of oxide films prepared by SILAR are described, focusing on supercapacitors, transparent electrodes, solar cells, and photoelectrochemical devices.

Toxicological effects and bioaccumulation of fullerene C60 (FC60) in the marine bivalve Ruditapes philippinarum.

Fullerene C60 (FC60), with its unique physical properties, has been used in many applications in recent decades. The increased likelihood of direct release into the environment has raised interest in understanding the biological effects of FC60 to aquatic organisms. Nowadays, only few studies have analysed FC60 effects and bioaccumulation in marine organisms following in vivo exposure. To provide new data about FC60 toxicity, Ruditapes philippinarum was selected as target species to assess potential adverse effects of the contaminant. Clams were exposed for 1, 3 and 7 days to predicted environmental concentrations of FC60 (1 and 10 µg/L) and cellular and biochemical responses were evaluated in clams' gills, digestive gland and haemolymph. The FC60 content in gills and digestive gland was determined in all experimental conditions after 7 days of exposure. Results showed an increase in oxidative stress. In particular, a significant modulation in antioxidant enzyme activities, and changes in glutathione S-transferase activity were observed in gills. Moreover, damage to lipids and proteins was detected in FC60-treated (10 µg/L) clams. In digestive gland, slighter variations in antioxidant enzyme activities and damage to molecules were detected. CAT activity was significantly affected throughout the exposure, whereas damage to lipids was evident only at the end of exposure. FC60 accumulation was revealed in both gills and digestive gland, with values up to twelve-fold higher in the latter. Interestingly, haemolymph parameters were slightly affected by FC60 compared to the other tissues investigated. Indeed, only Single Cell Gel Electrophoresis and Neutral Red uptake assays showed increased values in FC60-exposed clams. Moreover, volume and diameter of haemocytes, haemocyte proliferation, and micronucleus assay highlighted significant variations in treated clams, but only in the first phases of exposure, and no changes were detected after 7 days. Our results suggested clam gills as the target tissue for FC60 toxicity under the exposure conditions tested: the high damage detected to lipids and proteins could contribute to long-term problems for the organism.

Nanocrystalline TiO2 Sensitive Layer for Plasmonic Hydrogen Sensing.

Solution processed TiO2 anatase film was used as sensitive layer for H2 detection for two plasmonic sensor configurations: A grating-coupled surface plasmon resonance sensor and a localized surface plasmon resonance sensor with gold nanoparticles. The main purpose of this paper is to elucidate the different H2 response observed for the two types of sensors which can be explained considering the hydrogen dissociation taking place on TiO2 at high temperature and the photocatalytic activity of the gold nanoparticles.

Optimization of Hybrid Sol-Gel Coating for Dropwise Condensation of Pure Steam.

We developed hybrid organic-inorganic sol-gel silica coatings with good durability in harsh environment (high temperatures, high vapor velocities) and with slightly hydrophobic behavior, sufficient to promote dropwise condensation (DWC) of pure steam. DWC is a very promising mechanism in new trends of thermal management and power generation systems to enhance the heat transfer during condensation as compared to film-wise condensation (FWC). The sol-gel coatings have been prepared from methyl triethoxy silane (MTES) and tetraethyl-orthosilicate (TEOS) and deposited on an aluminum substrate. The coatings were optimized in terms of precursor ratio and annealing temperature highlighting potentials and limits of such mixtures. A comprehensive surface characterization before and after saturated steam condensation tests has been performed and related to the thermal measurements for evaluating the heat transfer augmentation as compared to FWC obtained on untreated aluminum surfaces. The results showed that the developed hybrid organic-inorganic sol-gel silica coatings are promising DWC promoters.

Combined AOPs for Formaldehyde Degradation Using Heterogeneous Nanostructured Catalysts.

In this paper we studied the combination of advanced oxidation processes (AOPs), i.e., TiO2-based photocatalysis and photo-Fenton process, on the degradation of aqueous solutions containing a low (90 ppm) concentration of formaldehyde. Heterogeneous nanostructured catalysts, supported on polymeric nanofibers, were used; for comparison, some homogeneous or partly heterogeneous systems were also analyzed. Furthermore, to make the process more sustainable (in terms of costs and safety) no hydrogen peroxide was added to the system. The results showed that the combination of AOPs gave a synergy since the presence of iron was beneficial in promoting the photocatalytic activity of TiO2 while TiO2 was beneficial in promoting the photo-Fenton reaction. Moreover, very good results were obtained using fully heterogeneous nanostructured catalysts (based on TiO2 and FeSO4), without the need to add H2O2.

Gold Nanodisks Plasmonic Array for Hydrogen Sensing at Low Temperature.

We present a novel plasmonic hydrogen sensor consisting of an array of gold nanodisks produced by lithography. The size, height, and spacing of the disks were optimized using finite element simulation to generate a sharp localized surface plasmon resonance peak in the near-infrared wavelength region. The reported results show the possibility of developing an optical gas sensors-based bare Au nanostructures operating at a low temperature.

Au Nanoparticle Sub-Monolayers Sandwiched between Sol-Gel Oxide Thin Films.

Sub-monolayers of monodisperse Au colloids with different surface coverage have been embedded in between two different metal oxide thin films, combining sol-gel depositions and proper substrates functionalization processes. The synthetized films were TiO2, ZnO, and NiO. X-ray diffraction shows the crystallinity of all the oxides and verifies the nominal surface coverage of Au colloids. The surface plasmon resonance (SPR) of the metal nanoparticles is affected by both bottom and top oxides: in fact, the SPR peak of Au that is sandwiched between two different oxides is centered between the SPR frequencies of Au sub-monolayers covered with only one oxide, suggesting that Au colloids effectively lay in between the two oxide layers. The desired organization of Au nanoparticles and the morphological structure of the prepared multi-layered structures has been confirmed by Rutherford backscattering spectrometry (RBS), Secondary Ion Mass Spectrometry (SIMS), and Scanning Electron Microscopy (SEM) analyses that show a high quality sandwich structure. The multi-layered structures have been also tested as optical gas sensors.

Bioaccumulation and effects of titanium dioxide nanoparticles and bulk in the clam Ruditapes philippinarum.

Biochemical and cellular responses to low concentrations of TiO2 nanoparticles (nTiO2, 1 and 10 µg/L) and bulk (bTiO2, 10 µg/L) were evaluated in gills, digestive gland and haemolymph of the clam Ruditapes philippinarum after1, 3 and 7 days' exposure. At 7 days, titanium content was determined in gills and digestive gland. nTiO2 significantly increased antioxidant enzyme activities in both tissues, and lipid peroxidation in digestive gland at 10 µg/L only, and affected glutathione S-transferase activity. Slighter variations were observed in bTiO2-treated clams. A significant Ti bioaccumulation was detected in both gills and digestive gland of 10 µg nTiO2/L-exposed clams. In haemolymph, nTiO2 affected total haemocyte count, haemocyte proliferation, haemocyte diameter and volume, and induced DNA damage. Overall, this study demonstrated that TiO2 alters most of the biomarkers measured in clams, although responses were differently modulated depending on tissues and exposure conditions, and indicated that nTiO2 can be accumulated by bivalves, suggesting a potential risk for filter-feeding animals.

Measurement of the surface susceptibility and the surface conductivity of atomically thin MoS2 by spectroscopic ellipsometry.

We show how to correctly extract from the ellipsometric data the surface susceptibility and the surface conductivity that describe the optical properties of monolayer MoS2. Theoretically, these parameters stem from modelling a single-layer two-dimensional crystal as a surface current, a truly two-dimensional model. Current experimental practice is to consider this model equivalent to a homogeneous slab with an effective thickness given by the interlayer spacing of the exfoliating bulk material. We prove that the error in the evaluation of the surface susceptibility of monolayer MoS2, owing to the use of the slab model, is at least 10% or greater, a significant discrepancy in the determination of the optical properties of this material.

Titanate Fibroin Nanocomposites: A Novel Approach for the Removal of Heavy-Metal Ions from water.

In this study, we report the fabrication of nanocomposites made of titanate nanosheets immobilized in a solid matrix of regenerated silk fibroin as novel heavy-metal-ion removal systems. The capacity of these nanocomposite films to remove lead, mercury, and copper cations from water was investigated, and as shown by the elemental quantitative analysis performed, their removal capacity is 73 mmol/g for all of the ions tested. We demonstrate that the nanocomposites can efficiently retain the adsorbed ions, with no release of titanate nanosheets occurring even after several exposure cycles to ionic solutions, eliminating the risk of release of potentially hazardous nanosubstances to the environment. We also prove that the introduction of sodium ions in the nanocomposite formulation makes the materials highly selective toward the lead ions. The developed biopolymer nanocomposites can be potentially used for the efficient removal of heavy-metal-ion pollutants from water and, thanks to their physical and optical characteristics, offer the possibility to be used in sensor applications.

Degenerately Doped Metal Oxide Nanocrystals as Plasmonic and Chemoresistive Gas Sensors.

Highly doped wide band gap metal oxide nanocrystals have recently been proposed as building blocks for applications as transparent electrodes, electrochromics, plasmonics, and optoelectronics in general. Here we demonstrate the application of gallium-doped zinc oxide (GZO) nanocrystals as novel plasmonic and chemiresistive sensors for the detection of hazardous gases including hydrogen (H2) and nitrogen dioxide (NO2). GZO nanocrystals with a tunable surface plasmon resonance in the near-infrared are obtained using a colloidal heat-up synthesis. Thanks to the strong sensitivity of the plasmon resonances to chemical and electrical changes occurring at the surface of the nanocrystals, such optical features can be used to detect the presence of toxic gases. By monitoring the changes in the dopant-induced plasmon resonance in the near-infrared, we demonstrate that GZO thin films prepared depositing an assembly of highly doped GZO colloids are able to optically detect both oxidizing and reducing gases at mild (<100 °C) operating temperatures. Combined optical and electrical measurements show that trivalent dopants within ZnO nanocrystals enhance the gas sensing response compared to undoped ZnO. Moreover, improved sub-ppm of NO2 gas sensitivity is achieved by activating the sensors response through combined purple-blue (λ = 430 nm) light irradiation and mild heating at 75 °C. In addition, these thin films based on degenerately doped semiconductors are highly transparent in the visible range, enabling the fabrication of "invisible" gas sensors. The use of highly doped semiconductive nanocrystals for both IR plasmonic and chemiresistive sensors represent a marked advancement toward the development of highly sensitive and selective devices.

In vivo exposure of the marine clam Ruditapes philippinarum to zinc oxide nanoparticles: responses in gills, digestive gland and haemolymph.

Potential nanoparticle (NP) toxicity poses a growing concern in marine coastal environments. Among NPs, zinc oxide nanoparticles (nZnO) are widely used in many common products that ultimately become deposited in coastal habitats from multiple non-point sources. In this study, we evaluated the in vivo effects of nZnO in the clam Ruditapes philippinarum. Animals were exposed to nZnO (1 and 10 µg/L) and ZnCl2 (10 µg/L) for 7 days. ZnCl2 was used to compare the effects of the NPs to those of Zn(2+) and to ascertain whether nZnO toxicity is attributable to the release of ions into the aquatic medium. At differing time intervals during the exposure, several biochemical and cellular responses were evaluated in the clam gills, digestive gland, and haemolymph. The results showed that nZnO, at concentrations close to the predicted environmental levels, significantly affected various parameters in clam tissues. Significant increases in catalase and superoxide dismutase activities and a decreasing trend of glutathione S-transferase activity indicated the involvement of oxidative stress in nZnO toxicity. In clams exposed to ZnCl2, slight variations in antioxidant enzyme activities were detected with respect to nZnO-treated clams. However, no damage to lipids, proteins or DNA was revealed in all exposure conditions, suggesting a protection of antioxidant enzymes in the tissues. Of the various haemolymph parameters measured, haemocyte proliferation increased significantly, in ZnCl2-treated clams in particular. Under nZnO (10 µg/L) and ZnCl2 exposure, DNA damage in haemocytes was also revealed, but it was lower in clams exposed to ZnCl2. A decreasing trend in gill AChE activity of treated clams proposed a possible role of zinc ions in nZnO toxicity. However, the dissimilar modulation of the responses in the nZnO- and ZnCl2-exposed clams suggested different mechanisms of action, with nZnO toxicity possibly depending not only on the release of zinc ions but also on NP-specific features. Changes in the biological parameters measured in the clams were consistent with Zn accumulation in their gills and digestive glands.

Analysis of defect luminescence in Ga-doped ZnO nanoparticles.

We applied cathodoluminescence (CL) spectroscopy to evaluate the defect-induced luminescence within ZnO and Ga-doped ZnO (GZO) nanoparticles. The observed emissions from defect sites present in the GZO lattice exhibited a strong dependence on both dopant content and synthesis methods. The strong and broad defect-induced emissions and inhomogeneous population of intrinsic defects in nano-sized ZnO particles could effectively be suppressed by Ga doping, although large dopant amounts caused the generation of negatively-charged defects, VZn and Oi, with a subsequent increase of the luminescence. Upon deconvolution of the retrieved CL spectra into individual sub-bands, the physical origin of all the sub-bands could be clarified, and related to sample composition and synthesis protocol. This study lays the foundation of quantitative CL evaluation of defects to assess the quality of GZO optoelectronic devices.